The global welfare impact of China: Trade integration and technological change

This paper evaluates the global welfare impact of China's trade integration and technological change in a multi-country quantitative Ricardian-Heckscher-Ohlin model.We simulate two alternative growth scenarios: a "balanced" one in which China's productivity grows at the same rate in each sector, and an "unbalanced" one in whichChina's comparative disadvantage sectors catch up disproportionately faster to theworld productivity frontier. Contrary to a well-known conjecture (Samuelson 2004),the large majority of countries experience significantly larger welfare gains whenChina's productivity growth is biased towards its comparative disadvantage sectors.This finding is driven by the inherently multilateral nature of world trade.

Kernel-PCA data integration with enhanced interpretability

Background Nowadays, combining the different sources of information to improve the biological knowledge available is a challenge in bioinformatics. One of the most powerful methods for integrating heterogeneous data types are kernel-based methods. Kernel-based data integration approaches consist of two basic steps: firstly the right kernel is chosen for each data set; secondly the kernels from the different data sources are combined to give a complete representation of the available data for a given statistical task. Results We analyze the integration of data from several sources of information using kernel PCA, from the point of view of reducing dimensionality. Moreover, we improve the interpretability of kernel PCA by adding to the plot the representation of the input variables that belong to any dataset. In particular, for each input variable or linear combination of input variables, we can represent the direction of maximum growth locally, which allows us to identify those samples with higher/lower values of the variables analyzed. Conclusions The integration of different datasets and the simultaneous representation of samples and variables together give us a better understanding of biological knowledge.

Integration in strategic alliances : a conceptual framework of IT use in marketing as NPD key factor

En una economia basada en el coneixement, la innovació del producte es considera un factor clau a l'hora de determinar la competitivitat, la productivitat i el creixement d'una companyia. No obstant això, l'experiència de les companyies demostra la necessitat d'un nou model de gestió de la innovació del producte: una gestió basada en el màrqueting, en què la cooperació i l'ús intensiu de les tecnologies de la informació i de la comunicació (TIC) són especialment importants. En els darrers anys, la bibliografia sobre màrqueting ha analitzat el paper de la cooperació en l'èxit del procés d'innovació. No obstant això, fins ara pocs treballs han estudiat el paper que té l'ús de les TIC en el màrqueting en l'èxit del desenvolupament de nous productes (NPD, New Product Development en anglès). És una omissió curiosa, tenint en compte que el nou entorn competitiu és definit per una economia i una societat basades principalment en l'ús intensiu de les TIC i del coneixement. L'objectiu d'aquest treball és investigar el paper que l'ús de les TIC en el màrqueting té en el procés de desenvolupament de nous productes, com a element que reforça la integració d'agents al projecte, afavorint l'establiment de relacions dirigides a la cooperació i l'adquisició d'intel·ligència de mercat útil en el procés de desenvolupament de nous productes. L'estudi d'una mostra de 2.038 companyies de tots els sectors de l'activitat econòmica a Catalunya ens permet contrastar hipòtesis inicials i establir un perfil de companyia innovadora basat en les importants relacions que hi ha entre la innovació, l'ús de TIC en el màrqueting i la integració. Sobresurten dues idees en la nostra anàlisi. En primer lloc, l'ús intensiu de les TIC en el màrqueting fa que la companyia sigui més innovadora, ja que percep que el seu ús ajuda a superar barreres a la innovació i accelera els processos, que es tornen més eficients. En segon lloc, incrementant l'ús de les TIC en el màrqueting es fa augmentar la predisposició de la companyia a integrar agents particulars en l'entorn de negoci en el desenvolupament del procés d'innovació i a col·laborar-hi, de manera que es millora el grau d'adaptació del nou producte a les demandes del mercat.

Integration of a 3D rendering engine with a physics simulator

The goal of this project is the integration of a set of technologies (graphics, physical simulation, input), with the azm of assembling an application framework in phyton. In this research, a set of key introductory concepts are presented in adoption of a deep study of the state of the art of 3D applications. Phyton is selected an justified as the programing language due to the features and advantages that it offers in front of other languages. Finally the design and implementation of the framework is presented in the last chapter with some client application examples.

Use of physiological constraints to identify quantitative design principles for gene expression in yeast adaptation to heat shock

Background: Understanding the relationship between gene expression changes, enzyme activity shifts, and the corresponding physiological adaptive response of organisms to environmental cues is crucial in explaining how cells cope with stress. For example, adaptation of yeast to heat shock involves a characteristic profile of changes to the expression levels of genes coding for enzymes of the glycolytic pathway and some of its branches. The experimental determination of changes in gene expression profiles provides a descriptive picture of the adaptive response to stress. However, it does not explain why a particular profile is selected for any given response. Results: We used mathematical models and analysis of in silico gene expression profiles (GEPs) to understand how changes in gene expression correlate to an efficient response of yeast cells to heat shock. An exhaustive set of GEPs, matched with the corresponding set of enzyme activities, was simulated and analyzed. The effectiveness of each profile in the response to heat shock was evaluated according to relevant physiological and functional criteria. The small subset of GEPs that lead to effective physiological responses after heat shock was identified as the result of the tuning of several evolutionary criteria. The experimentally observed transcriptional changes in response to heat shock belong to this set and can be explained by quantitative design principles at the physiological level that ultimately constrain changes in gene expression. Conclusion: Our theoretical approach suggests a method for understanding the combined effect of changes in the expression of multiple genes on the activity of metabolic pathways, and consequently on the adaptation of cellular metabolism to heat shock. This method identifies quantitative design principles that facilitate understating the response of the cell to stress.

Semantic data integration in a newspaper content management system

A newspaper content management system has to deal with a very heterogeneous information space as the experience in the Diari Segre newspaper has shown us. The greatest problem is to harmonise the different ways the involved users (journalist, archivists...) structure the newspaper information space, i.e. news, topics, headlines, etc. Our approach is based on ontology and differentiated universes of discourse (UoD). Users interact with the system and, from this interaction, integration rules are derived. These rules are based on Description Logic ontological relations for subsumption and equivalence. They relate the different UoD and produce a shared conceptualisation of the newspaper information domain.

Heat shock response in yeast involves changes in both transcription rates and mRNA stabilities

We have analyzed the heat stress response in the yeast Saccharomyces cerevisiae by determining mRNA levels and transcription rates for the whole transcriptome after a shift from 25uC to 37uC. Using an established mathematical algorithm, theoretical mRNA decay rates have also been calculated from the experimental data. We have verified the mathematical predictions for selected genes by determining their mRNA decay rates at different times during heat stress response using the regulatable tetO promoter. This study indicates that the yeast response to heat shock is not only due to changes in transcription rates, but also to changes in the mRNA stabilities. mRNA stability is affected in 62% of the yeast genes and it is particularly important in shaping the mRNA profile of the genes belonging to the environmental stress response. In most cases, changes in transcription rates and mRNA stabilities are homodirectional for both parameters, although some interesting cases of antagonist behavior are found. The statistical analysis of gene targets and sequence motifs within the clusters of genes with similar behaviors shows that both transcriptional and post-transcriptional regulons apparently contribute to the general heat stress response by means of transcriptional factors and RNA binding proteins.

Application of Information Statistical Theory to the Description of the Effect of Heat Conduction on the Chemical Reaction Rate in Gases

The effect of the heat flux on the rate of chemical reaction in dilute gases is shown to be important for reactions characterized by high activation energies and in the presence of very large temperature gradients. This effect, obtained from the second-order terms in the distribution function (similar to those obtained in the Burnett approximation to the solution of the Boltzmann equation), is derived on the basis of information theory. It is shown that the analytical results describing the effect are simpler if the kinetic definition for the nonequilibrium temperature is introduced than if the thermodynamic definition is introduced. The numerical results are nearly the same for both definitions

Kernel-PCA data integration with enhanced interpretability

Background Nowadays, combining the different sources of information to improve the biological knowledge available is a challenge in bioinformatics. One of the most powerful methods for integrating heterogeneous data types are kernel-based methods. Kernel-based data integration approaches consist of two basic steps: firstly the right kernel is chosen for each data set; secondly the kernels from the different data sources are combined to give a complete representation of the available data for a given statistical task. Results We analyze the integration of data from several sources of information using kernel PCA, from the point of view of reducing dimensionality. Moreover, we improve the interpretability of kernel PCA by adding to the plot the representation of the input variables that belong to any dataset. In particular, for each input variable or linear combination of input variables, we can represent the direction of maximum growth locally, which allows us to identify those samples with higher/lower values of the variables analyzed. Conclusions The integration of different datasets and the simultaneous representation of samples and variables together give us a better understanding of biological knowledge.

No Major Differences Found between the Effects of Microwave-Based and Conventional Heat Treatment Methods on Two Different Liquid Foods

Extension of shelf life and preservation of products are both very important for the food industry. However, just as with other processes, speed and higher manufacturing performance are also beneficial. Although microwave heating is utilized in a number of industrial processes, there are many unanswered questions about its effects on foods. Here we analyze whether the effects of microwave heating with continuous flow are equivalent to those of traditional heat transfer methods. In our study, the effects of heating of liquid foods by conventional and continuous flow microwave heating were studied. Among other properties, we compared the stability of the liquid foods between the two heat treatments. Our goal was to determine whether the continuous flow microwave heating and the conventional heating methods have the same effects on the liquid foods, and, therefore, whether microwave heat treatment can effectively replace conventional heat treatments. We have compared the colour, separation phenomena of the samples treated by different methods. For milk, we also monitored the total viable cell count, for orange juice, vitamin C contents in addition to the taste of the product by sensory analysis. The majority of the results indicate that the circulating coil microwave method used here is equivalent to the conventional heating method based on thermal conduction and convection. However, some results in the analysis of the milk samples show clear differences between heat transfer methods. According to our results, the colour parameters (lightness, red-green and blue-yellow values) of the microwave treated samples differed not only from the untreated control, but also from the traditional heat treated samples. The differences are visually undetectable, however, they become evident through analytical measurement with spectrophotometer. This finding suggests that besides thermal effects, microwave-based food treatment can alter product properties in other ways as well.

Content and Language Integration as a part of a degree reform at Tampere University of Technology

Tampere University of Technology is undergoing a degree reform that started in 2013. One of the major changes in the reform was the integration of compulsory Finnish, Swedish and English language courses to substance courses at the bachelor level. The integration of content and language courses aims at higher quality language learning, more fluency in studies, and increased motivation toward language studies. In addition, integration is an opportunity to optimize the use of resources and to offer courses that are more tailored to the students' field of study and to the skills needed in working life. The reform also aims to increase and develop co-operation between different departments at the university and to develop scientific follow up. This paper gives an overview of the integration process conducted at TUT and gives examples of adjunct CLIL implementations in three different languages.

jxSensor: a sensor network integration layer for JXTA

Nowadays, Wireless Sensor Networks (WSN) arealready a very important data source to obtain data about the environment. Thus, they are key to the creation of Cyber-Physical Systems (CPS). Given the popularity of P2P middlewares as ameans to efficiently process information and distribute services, being able to integrate them to WSN¿s is an interesting proposal. JXTA is a widely used P2P middleware that allows peers to easily exchange information, heavily relying on its main architectural highlight, the capability to organize peers with common interests into peer groups. However, right now, approaches to integrate WSNs to a JXTA network seldom take advantage of peer groups. For this reason, in this paper we present jxSensor, an integrationlayer for sensor motes which facilitates the deployment of CPS¿s under this architecture. This integration has been done taking into account JXTA¿s idiosyncrasies and proposing novel ideas,such as the Virtual Peer, a group of sensors that acts as a single entity within the peer group context.

Fiscal policy and interest rates: the role of financial and economic integration

It is commonly believed that a fiscal expansion raises interest rates. However, these crowding out effects of deficits have been found to be small or non-existent. One explanation is that financial integration offsets interest rate differentials on globalised bond markets. This paper measures the degree of integration of government bond markets, using spatial modelling techniques to take this spillover on financial markets into account. Our main finding is that the crowding out effect on domestic interest rates is significant, but is reduced by spillover across borders. This spillover is important in major crises or in periods of coordinated policy actions. This result is generally robust to various measures of cross-country linkages. We find spillover to be much stronger among EU countries.

Removal of chromium (vi) in aqueous environments using cork and heat-treated cork samples from quercus cerris and quercus suber

Chromium (VI) removal and its reduction to chromium (III) from aqueous solution by untreated and heat-treated Quercus cerris and heat-treated Quercus suber black agglomerate cork granules was investigated. Initial screening studies revealed that among the sorbents tested, untreated Q. cerris and Q. suber black agglomerate are the most efficient in the removal of Cr(VI) ions and were selected for adsorption essays. Heat treatment adversely affected chromium adsorption and chromium (VI) reduction in Q. cerris cork. The highest metal uptake was found at pH 3.0 for Q. cerris and pH 2.0 for black agglomerate. The experimental data fitted the Langmuir model and the calculated qmax was 22.98 mg/g in black agglomerate and 21.69 mg/g in untreated Q. cerris cork. The FTIR results indicated that while in black agglomerate, lignin is the sole component responsible for Cr(VI) sorption, and in untreated Q. cerris cork, suberin and polysaccharides also play a significant role on the sorption. The SEM-EDX results imply that chromium has a homogenous distribution within both cork granules. Also, phloemic residues in Q. cerris granules showed higher chromium concentration. The results obtained in this study show that untreated Q. cerris and black agglomerate cork granules can be an effective and economical alternative to more costly materials for the treatment of liquid wastes containing chromium