GesRetail : software de gestión integral

El proyecto surge con el fin de crear una aplicación que responda a las necesidades de gestión y control de las actividades que se desarrollan en empresas minoristas dedicadas al sector de la electrónica de consumo. Este tipo de establecimientos aunque están muy especializados y proporcionan un trato excelente al público, suelen tener deficiencias técnicas a la hora de gestionar y controlar su negocio. Muchos de ellos carecen de programas informáticos adaptados a sus necesidades, e incluso en algún caso no disponen de ninguno por el alto coste que les supone. Dicho software tiene dos objetivos: por un lado atender las necesidades de este sector y por otro que el desembolso de la adquisición e implantación del mismo sea asequible. Para conseguir este último objetivo se utilizará software libre.

Software de adquisición de imágenes y reconocimiento óptico de caracteres para Android

El presente proyecto parte de la propuesta realizada por la empresa Tempos21 donde se recoge la necesidad de crear una librería de reconocimiento óptico de caracteres para la plataforma Android. Esta librería podrá ser utilizada por diferentes aplicaciones ejecutadas en terminales móviles que cuenten con este sistema operativo.

Migración de servicios críticos: de plataformas propietarias a software libre

El objetivo principal del presente trabajo pretende demostrar el potencial del software libre frente al software propietario que actualmente utiliza la empresa Systemum.

Software para la representación gráfica a la solución de ruteo y carga de vehículos en algoritmo de tipo 2L-CVRP

El siguiente artículo presenta el trabajo realizado en la creación de una aplicación de software libre que representa gráficamente las rutas generadas y la distribución de los elementos transportados en el interior de un vehículo de carga.

Implantació d'un ERP i una plataforma e-commerce de software lliure per al desenvolupament web d'una empresa

Aquest projecte constitueix la introducció d'un sistema d'informació a una PIME catalana. Incorporant dos grans i potents funcionalitats i serveis a l'empresa: la venta online mitjançant un e-commerce i la gestió de la informació i productes que hi ha a l'empresa mitjançant un ERP.

Study of chemical modification of alkaline lignin by the glyoxalation reaction

In this study, glyoxalated alkaline lignins with a non-volatile and non-toxic aldehyde, which can be obtained from several natural resources, namely glyoxal, were prepared and characterized for its use in wood adhesives. The preparation method consisted of the reaction of lignin with glyoxal under an alkaline medium. The influence of reaction conditions such as the molar ratio of sodium hydroxide-to-lignin and reaction time were studied relative to the properties of the prepared adducts. The analytical techniques used were FTIR and 1H-NMR spectroscopies, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Results from both the FTIR and 1H-NMR spectroscopies showed that the amount of introduced aliphatic hydroxyl groups onto the lignin molecule increased with increasing reaction time and reached a maximum value at 10 h, and after they began to decrease. The molecular weights remained unchanged until 10 h of reaction time, and then started to increase, possibly due to the repolymerization reactions. DSC analysis showed that the glass transition temperature (Tg) decreased with the introduction of glyoxal onto the lignin molecule due to the increase in free volume of the lignin molecules. TGA analysis showed that the thermal stability of glyoxalated lignin is not influenced and remained suitable for wood adhesives. Compared to the original lignin, the improved lignin is reactive and a suitable raw material for adhesive formula

RestKiosk : Software d'autoservei per a restauració

Primera versió d'una aplicació per a establiments de restauració que té com a finalitat oferir als clients la possibilitat de fer les comandes de forma autònoma.

Creació d’un visor web basat en software lliure per al Consorci d’Ardenya-Cadiretes

En aquest treball es pretén explicar el procés metodològic que s'ha seguit per a crear una eina informàtica de visualització de dades "online" per al Consorci d'Ardenya – Cadiretes. Inicialment s'explica el context en el que es desenvolupa el projecte, com a conveni de col·laboració en pràctiques, per a realitzar el treball de final del Màster en Tecnologies de la Informació Geogràfica, en la seva tretzena edició. S'explica també la situació de l'entitat col·laboradora del projecte, el consorci d'Ardenya – Cadiretes. Els objectius que es fixen al projecte són els de generar aquest visor amb eines de software lliure, de manera que el cost de producció sigui el menor possible. També es pretén crear una aplicació de senzill ús i que resulti atractiva per al client web. Es repassen els diferents aspectes tècnics i funcionals que ha de tenir en compte el projecte, per tal que aquest es pugui desenvolupar de forma correcte. Es tracten temes com el tipus de programari que s'ha de fer servir i per que unes aplicacions es consideren més oportunes que d'altres per a treballar tasques concretes del propi projecte. A través de la metodologia seguida en el projecte es repassa el dia a dia que s'ha anat seguint durant el projecte, des de l'inici en el que s'instal·laven els diferents programes necessaris fins al final de l'escriptura del codi de programació, passant per l'edició de les dades geogràfiques o la càrrega d'aquestes al servidor de mapes

Modification of the Perrine-Baum diagram to improve the calculation of high voltage electric lines

Through the history of Electrical Engineering education, vectorial and phasorial diagrams have been used as a fundamental learning tool. At present, computational power has replaced them by long data lists, the result of solving equation systems by means of numerical methods. In this sense, diagrams have been shifted to an academic background and although theoretically explained, they are not used in a practical way within specific examples. This fact may be against the understanding of the complex behavior of the electrical power systems by students. This article proposes a modification of the classical Perrine-Baum diagram construction to allowing both a more practical representation and a better understanding of the behavior of a high-voltage electric line under different levels of load. This modification allows, at the same time, the forecast of the obsolescence of this behavior and line’s loading capacity. Complementary, we evaluate the impact of this tool in the learning process showing comparative undergraduate results during three academic years

Propuesta para incorporar evaluación y pruebas de usabilidad dentro de un proceso de desarrollo de software

Usability is critical to consider an interactive software system successful. Usability testing and evaluation during product development have gained wide acceptance as a strategy to improve product quality. Early introduction of usability perspectives in a product is very important in order to provide a clear visibility of the quality aspects not only for the developers, but also for the testing users as well. However, usability evaluation and testing are not commonly taken into consideration as an essential element of the software development process. Then, this paper exposes a proposal to introduce usability evaluation and testing within a software development through reuse of software artifacts. Additionally, it suggests the introduction of an auditor within the classification of actors for usability tests. It also proposes an improvement of checklists used for heuristics evaluation, adding quantitative and qualitative aspects to them

Implementació d'un contact center per empreses basat en software lliure

El proyecto consiste en la creación de un CRM de contact center con canal de telefonía y correo electrónico. Se ha llevado a cabo utilizando software libre. Se integra con centralita telefónica para permitir la realización de llamadas por Voip.

Plan de implantación y migración al software libre del Ayuntamiento de Palencia

Proyecto de migración e implantación de software libre en el Ayuntamiento de Palencia.

Free-and open source software for a course on network management: authoring and enactment of scripts based on collaborative learning strategies

This paper describes a Computer-Supported Collaborative Learning (CSCL) case study in engineering education carried out within the context of a network management course. The case study shows that the use of two computing tools developed by the authors and based on Free- and Open-Source Software (FOSS) provide significant educational benefits over traditional engineering pedagogical approaches in terms of both concepts and engineering competencies acquisition. First, the Collage authoring tool guides and supports the course teacher in the process of authoring computer-interpretable representations (using the IMS Learning Design standard notation) of effective collaborative pedagogical designs. Besides, the Gridcole system supports the enactment of that design by guiding the students throughout the prescribed sequence of learning activities. The paper introduces the goals and context of the case study, elaborates onhow Collage and Gridcole were employed, describes the applied evaluation methodology, anddiscusses the most significant findings derived from the case study.

ClubADSL: When your neighbors are your friends

ADSL is becoming the standard form of residential and small-business broadband Internet access due to, primarily, its low deployment cost. These ADSL residential lines are often deployed with 802.11 Access Points (AP) that providewireless connectivity. Given the density of ADSL deployment, it is often possible for a residential wireless client to be in range of several other APs, belonging to neighbors, with ADSL connectivity. While the ADSL technology has showed evident limits in terms of capacity (with speeds ranging 1-10 Mbps), the short-range wireless communication can guarantee a muchhigher capacity (up to 20 Mbps). Furthermore, the ADSL links in the neighborhood are generally under-utilized, since ADSL subscribers do not connect 100% of the time. Therefore, it is possible for a wireless client to simultaneously connect to several APs in range and effectively aggregate their available ADSL bandwidth.In this paper, we introduce ClubADSL, a wireless client that can simultaneously connect to several APs in range on different frequencies and aggregate both their downlink and uplink capacity. ClubADSL is a software that runs locally on the client-side, and it requires neither modification to the existing Internet infrastructure, nor any hardware/protocol upgradesto the 802.11 local area network. We show the feasibility of ClubADSL in seamlessly transmitting TCP traffic, and validate its implementation both in controlled scenarios and with current applications over real ADSL lines. In particular we show that a ClubADSL client can greatly benefit from the aggregated download bandwidth in the case of server-client applications such as video streaming, but can also take advantage of the increased upload bandwidth greatly reducing download times with incentive-based P2P applications such as BitTorrent.

Biana: a software framework for compiling biological interactions and analyzing networks

Background: The analysis and usage of biological data is hindered by the spread of information across multiple repositories and the difficulties posed by different nomenclature systems and storage formats. In particular, there is an important need for data unification in the study and use of protein-protein interactions. Without good integration strategies, it is difficult to analyze the whole set of available data and its properties.Results: We introduce BIANA (Biologic Interactions and Network Analysis), a tool for biological information integration and network management. BIANA is a Python framework designed to achieve two major goals: i) the integration of multiple sources of biological information, including biological entities and their relationships, and ii) the management of biological information as a network where entities are nodes and relationships are edges. Moreover, BIANA uses properties of proteins and genes to infer latent biomolecular relationships by transferring edges to entities sharing similar properties. BIANA is also provided as a plugin for Cytoscape, which allows users to visualize and interactively manage the data. A web interface to BIANA providing basic functionalities is also available. The software can be downloaded under GNU GPL license from http://sbi.imim.es/web/BIANA.php.Conclusions: BIANA's approach to data unification solves many of the nomenclature issues common to systems dealing with biological data. BIANA can easily be extended to handle new specific data repositories and new specific data types. The unification protocol allows BIANA to be a flexible tool suitable for different user requirements: non-expert users can use a suggested unification protocol while expert users can define their own specific unification rules.