Power supply noise and logic error probability

Voltage fluctuations caused by parasitic impedances in the power supply rails of modern ICs are a major concern in nowadays ICs. The voltage fluctuations are spread out to the diverse nodes of the internal sections causing two effects: a degradation of performances mainly impacting gate delays anda noisy contamination of the quiescent levels of the logic that drives the node. Both effects are presented together, in thispaper, showing than both are a cause of errors in modern and future digital circuits. The paper groups both error mechanismsand shows how the global error rate is related with the voltage deviation and the period of the clock of the digital system.

Error probability in synchronous digital circuits due to power supply noise

This paper presents a probabilistic approach to model the problem of power supply voltage fluctuations. Error probability calculations are shown for some 90-nm technology digital circuits.The analysis here considered gives the timing violation error probability as a new design quality factor in front of conventional techniques that assume the full perfection of the circuit. The evaluation of the error bound can be useful for new design paradigms where retry and self-recoveringtechniques are being applied to the design of high performance processors. The method here described allows to evaluate the performance of these techniques by means of calculating the expected error probability in terms of power supply distribution quality.

Voltage fluctuations in IC power supply distribution

The supply voltage decrease and powerconsumption increase of modern ICs made the requirements for low voltage fluctuation caused by packaging and on-chip parasitic impedances more difficult to achieve. Most of the research works on the area assume that all the nodes of the chip are fed at thesame voltage, in such a way that the main cause of disturbance or fluctuation is the parasitic impedance of packaging. In the paper an approach to analyze the effect of high and fast current demands on the on-chip power supply network. First an approach to model the entire network by considering a homogeneous conductive foil is presented. The modification of the timing parameters of flipflops caused by spatial voltage drops through the IC surface are also investigated.

When supply travels far beyond demand: Causes of oversupply in Spain’s transport infrastructure

Spain’s transport infrastructure policy has become a paradigmatic case of oversupply and of mismatch with demand. The massive expansion of the country’s transport infrastructure over the last decade has not been a response to demand bottlenecks or previously identified needs. For this reason, the intensity of use today on all interurban modes of transport in Spain falls well below that of other EU countries. This paper analyzes the institutional and regulatory factors that have permitted this policy, allowing us to draw lessons from the Spanish case that should help other countries avoid the pitfalls and shortcomings of Spanish policy.

When supply travels far beyond demand: Causes of oversupply in Spain’s transport infrastructure

Spain’s transport infrastructure policy has become a paradigmatic case of oversupply and of mismatch with demand. The massive expansion of the country’s transport infrastructure over the last decade has not been a response to demand bottlenecks or previously identified needs. For this reason, the intensity of use today on all interurban modes of transport in Spain falls well below that of other EU countries. This paper analyzes the institutional and regulatory factors that have permitted this policy, allowing us to draw lessons from the Spanish case that should help other countries avoid the pitfalls and shortcomings of Spanish policy.

Effect of nitrogen and phosphorus supply on growth, chlorophyll content and tissue composition of the macroalga Chaetomorpha linum (O.F. Mull), Kutz, in a Mediterranean Coastal Lagoon

The effect of dissolved nutrients on growth, nutrient content and uptake rates of Chaetomorpha linum in a Mediterranean coastal lagoon (Tancada, Ebro delta, NE Spain) was studied in laboratory experiments. Water was enriched with distinct forms of nitrogen, such as nitrate or ammonium and phosphorus. Enrichment with N, P or with both nutrients resulted in a significant increase in the tissue content of these nutrients. N-enrichment was followed by an increase in chlorophyll content after 4 days of treatment, although the difference was only significant when nitrate was added without P. P-enrichment had no significant effect on chlorophyll content. In all the treatments an increase in biomass was obseved after 10 days. This increase was higher in the N+P treatments. In all the treatments the uptake rate was significantly higher when nutrients were added than in control jars. The uptake rate of N, as ammonium, and P were significantly higher when they were added alone while that of N as nitrate was higher in the N+P treatment. In the P-enriched cultures, the final P-content of macroalgal tissues was ten-fold that of the initial tissue concentrations, thereby indicating luxury P-uptake. Moreover, at the end of the incubation the N:P ratio increased to 80, showing that P rather than N was the limiting factor for C. linum in the Tancada lagoon. The relatively high availability of N is related to the N inputs from rice fields that surround the lagoon and to P binding in sediments.

Effects of nitrogen supply on wheat and on soil nitrate

Field experiments were conducted at two locations during two growing seasons in the Ebro Valley (Spain), to evaluate the effects of N fertilization on yield and quality of Mediterranean-type wheat in irrigated conditions. Seven N treatments and a control were investigated. The average grain yields ranged from 2117 to 5551 kg ha-1 depending on the year and location. Grain protein ranged from 14.25 to 16.9%, and other quality parameters such as the dough strength (W) also varied with year and location, confirming the suitability of Mediterranean-type wheat and the climate for the production of good bread-making quality wheat. However, grain yields are normally low and both yields and quality can be greatly affected by the variability of this type of climate, even under irrigation. Under these conditions, grain yield increases were mainly due to an increase in the number of grains per m2 without a reduction in the N content per spike, suggesting that N in the grain was not source-limited, possibly due to the lower grain yields and relatively high soil nitrate concentrations. In soils with lower initial soil NO-3N contents, better grain yields could be achieved by applying a N fertilizer rate of about 100 kg N ha-1, whereas in soils with high initial NO-3N contents, no N or a maximum rate of 50 kg N ha-1 is needed to obtain a good grain quality, showing the possibility of producing high-quality wheat with a low amount of N fertilizer and thus increasing the sustainability of the cropping system.

The persistence of return on assets: differences between industries and differences between firms

This study offers a statistical analysis of the persistence of annual profits across a sample of firms from different European Union (EU) countries. To this end, a Bayesian dynamic model has been used which enables the annual behaviour of those profits to be broken down into a permanent structural component on the one hand and a transitory component on the other, while also distinguishing between general effects affecting the industry as a whole to which each firm belongs and specific effects affecting each firm in particular. This break down enables the relative importance of those fundamental components to be evaluated. The data analysed come from a sample of 23,293 firms in EU countries selected from the AMADEUS data-base. The period analysed ran from 1999 to 2007 and 21 sectors were analysed, chosen in such a way that there was a sufficiently large number of firms in each country*sector combination for the industry effects to be estimated accurately enough for meaningful comparisons to be made by sector and country. The analysis has been conducted by sector and by country from a Bayesian perspective, thus making the study more flexible and realistic since the estimates obtained do not depend on asymptotic results. In general terms, the study finds that, although the industry effects are significant, more important are the specific effects. That importance varies depending on the sector or the country in which the firm carries out its activity. The influence of firm effects accounts for more than 90% of total variation and display a significantly lower degree of persistence, with adjustment speeds oscillating around 51.1%. However, this pattern is not homogeneous but depends on the sector and country analysed. Industry effects have a more marginal importance, being significantly more persistent, with adjustment speeds oscillating around 10% with this degree of persistence being more homogeneous at both country and sector levels.

Applying precision feeding techniques in growing-finishing pig operations

The high cost of feed ingredients, the use of non-renewable sources of phosphate and the dramatic increase in the environmental load resulting from the excessive land application of manure are major challenges for the livestock industry. Precision feeding is proposed as an essential approach to improve the utilization of dietary nitrogen, phosphorus and other nutrients and thus reduce feeding costs and nutrient excretion. Precision feeding requires accurate knowledge of the nutritional value of feedstuffs and animal nutrient requirements, the formulation of diets in accordance with environmental constraints, and the gradual adjustment of the dietary nutrient supply to match the requirements of the animals. After the nutritional potential of feed ingredients has been precisely determined and has been improved by the addition of enzymes (e.g. phytases) or feed treatments, the addition of environmental objectives to the traditional feed formulation algorithms can promote the sustainability of the swine industry by reducing nutrient excretion in swine operations with small increases in feeding costs. Increasing the number of feeding phases can also contribute to significant reductions in nutrient excretion and feeding costs. However, the use of precision feeding techniques in which pigs are fed individually with daily tailored diets can further improve the efficiency with which pigs utilize dietary nutrients. Precision feeding involves the use of feeding techniques that allow the provision of the right amount of feed with the right composition at the right time to each pig in the herd. Using this approach, it has been estimated that feeding costs can be reduced by more than 4.6%, and nitrogen and phosphorus excretion can both be reduced by more than 38%. Moreover, the integration of precision feeding techniques into large-group production systems can provide real-time off-farm monitoring of feed and animals for optimal slaughter and production strategies, thus improving the environmental sustainability of pork production, animal well-being and meat-product quality.

When supply travels far beyond demand: Causes of oversupply in Spain’s transport infrastructure

Spain’s transport infrastructure policy has become a paradigmatic case of oversupply and of mismatch with demand. The massive expansion of the country’s transport infrastructure over the last decade has not been a response to demand bottlenecks or previously identified needs. For this reason, the intensity of use today on all interurban modes of transport in Spain falls well below that of other EU countries. This paper analyzes the institutional and regulatory factors that have permitted this policy, allowing us to draw lessons from the Spanish case that should help other countries avoid the pitfalls and shortcomings of Spanish policy.

When supply travels far beyond demand: Causes of oversupply in Spain’s transport infrastructure

Spain’s transport infrastructure policy has become a paradigmatic case of oversupply and of mismatch with demand. The massive expansion of the country’s transport infrastructure over the last decade has not been a response to demand bottlenecks or previously identified needs. For this reason, the intensity of use today on all interurban modes of transport in Spain falls well below that of other EU countries. This paper analyzes the institutional and regulatory factors that have permitted this policy, allowing us to draw lessons from the Spanish case that should help other countries avoid the pitfalls and shortcomings of Spanish policy.

When supply travels far beyond demand: Institutional and regulatory causes of oversupply in Spain’s transport infrastructure

Spain’s transport infrastructure policy has become a paradigmatic case of oversupply and of mismatch with demand. The massive expansion of the country’s transport infrastructure over the last decade has not been a response to demand bottlenecks or previously identified needs. For this reason, the intensity of use today on all interurban modes of transport in Spain falls well below that of other EU countries. This paper analyzes the institutional and regulatory factors that have permitted this policy, allowing us to draw lessons from the Spanish case that should help other countries avoid the pitfalls and shortcomings of Spanish policy. Based on our analysis, we also discuss policy remedies and suggest reforms in different regulatory areas, which could help improve the performance of Spain’s infrastructure policy.

Investigating the impact of small versus large firms on economic performance of countries and industries

Following earlier work by Audretsch et al. (2002), we assume that an optimal size-class structure exists, in terms of achieving maximal economic growth rates. Such an optimal structure is likely to exist as economies need a balance between the core competences of large firms (such as exploitation of economies of scale) and those of smaller firms (such as flexibility and exploration of new ideas). Accordingly, changes in size-class structure (i.e., changes in the relative shares in economic activity accounted for by micro, small, medium-sized and large firms) may affect macro-economic growth. Using a unique data base of the EU-27 countries for the period 2002-2008 for five broad sectors of economic activity and four size-classes, we find empirical support which suggests that, on average for these countries over this period, the share of micro and large firms may have been ‘above optimum’ (particularly in lower income EU countries) whereas the share of medium-sized firms may have been ‘below optimum’ (particularly in higher income EU countries). This evidence suggests that the transition from a ‘managed’ to an ‘entrepreneurial’ economy (Audretsch and Thurik, 2001) has not been completed yet in all countries of the EU-27. Keywords: small firms, large firms, size-classes, macro-economic performance

A dynamic analysis of asymmetric shocks in EU manufacturing

Available empirical evidence regarding the degree of symmetry between European economies in the context of Monetary Unification is not conclusive. This paper offers new empirical evidence concerning this issue related to the manufacturing sector. Instead of using a static approach as most empirical studies do, we analyse the dynamic evolution of shock symmetry using a state-space model. The results show a clear reduction of asymmetries in terms of demand shocks between 1975 and 1996, with an increase in terms of supply shocks at the end of the period.

The influence of substratum type and nutrient supply on biofilm organic matter utilization in streams

We investigated the effect of benthic substratum type (sand and rocks) and nutrient supply (N and P) on biofilm structure and heterotrophic metabolism in a field experiment in a forested Mediterranean stream (Fuirosos). Rock and sand colonization and biofilm formation was intensively studied for 44 d at two stream reaches: control and experimental (continuous addition of phosphate, ammonia, and nitrate). Structural (C, N, and polysaccharide content and bacterial and chlorophyll density) and metabolic biofilm parameters (b-glucosidase, peptidase, and phosphatase enzyme activities) were analyzed throughout the colonization process. The epilithic biofilm (grown on rocks) had a higher peptidase activity at the impacted reach, together with a higher algal and bacterial biomass. The positive relationship between the peptidase activity per cell and the N content of the epilithic biofilm suggested that heterotrophic utilization of proteinaceous compounds from within the biofilm was occurring. In contrast, nutrient addition caused the epipsammic biofilm (grown on sand) to exhibit lower b-glucosidase and phosphatase activities, without a significant increase in bacterial and algal biomass. The differential response to nutrient addition was related to different structural characteristics within each biofilm. The epipsammic biofilm had a constant and high C:N ratio (22.7) throughout the colonization. The epilithic biofilm had a higher C:N ratio at the beginning of the colonization (43.2) and evolved toward a more complex structure (high polysaccharide content and low C:N ratio) during later stages. The epipsammic biofilm was a site for the accumulation and degradation of organic matter: polysaccharides and organic phosphorus compounds had higher degradation activities