Influence of pressure and radio frequency power on deposition rate and structural properties of hydrogenated amorphous silicon thin films prepared by plasma deposition

The influence of radio frequency (rf) power and pressure on deposition rate and structural properties of hydrogenated amorphous silicon (a-Si:H) thin films, prepared by rf glow discharge decomposition of silane, have been studied by phase modulated ellipsometry and Fourier transform infrared spectroscopy. It has been found two pressure regions separated by a threshold value around 20 Pa where the deposition rate increases suddenly. This behavior is more marked as rf power rises and reflects the transition between two rf discharges regimes. The best quality films have been obtained at low pressure and at low rf power but with deposition rates below 0.2 nm/s. In the high pressure region, the enhancement of deposition rate as rf power increases first gives rise to a reduction of film density and an increase of content of hydrogen bonded in polyhydride form because of plasma polymerization reactions. Further rise of rf power leads to a decrease of polyhydride bonding and the material density remains unchanged, thus allowing the growth of a-Si:H films at deposition rates above 1 nm/s without any important detriment of material quality. This overcoming of deposition rate limitation has been ascribed to the beneficial effects of ion bombardment on the a-Si:H growing surface by enhancing the surface mobility of adsorbed reactive species and by eliminating hydrogen bonded in polyhydride configurations.

Nucleation of diamond on silicon, SiAlON, and graphite substrates coated with an a-C:H layer

We investigated the influence of a hydrogenated disordered carbon (a-C:H) layer on the nucleation of diamond. Substrates c-Si<100>, SiAlON, and highly oriented pyrolytic graphite {0001} were used in this study. The substrate surfaces were characterized with Auger electron spectroscopy (AES) while diamond growth was followed with Raman spectroscopy and scanning electron microscopy (SEM). It was found that on silicon and SiAlON substrates the presence of the a-C:H layer enabled diamond to grow readily without any polishing treatment. Moreover, more continuous diamond films could be grown when the substrate was polished with diamond powder prior to the deposition of the a-C:H layer. This important result suggests that the nucleation of diamond occurs readily on disordered carbon surfaces, and that the formation of this type of layer is indeed one step in the diamond nucleation mechanism. Altogether, the data refute the argument that silicon defects play a direct role in the nucleation process. Auger spectra revealed that for short deposition times and untreated silicon surfaces, the deposited layer corresponds to an amorphous carbon layer. In these cases, the subsequent diamond nucleation was found to be limited. However, when the diamond nucleation density was found to be high; i.e., after lengthy deposits of a¿C:H or after diamond polishing, the Auger spectra suggested diamondlike carbon layers.

Magnetic properties of amorphous Fe-Si compositionally modulated thin films

The present paper reports on a magnetometric study of Fe‐Si compositionally modulated thin films. The low‐temperature dependence of the magnetization exhibit Bloch's T3/2 dependence with a minor T5/2 correction term. The spin‐wave stiffness constant deduced from the temperature coefficient depends on the characteristic modulation length and its values are much lower that in glassy alloys.

The work of Spanish men. A quantitative analysis based on census data, 1900-1970

This paper presents a historical examination of employment in old age in Spain, in order to characterize this labour segment and identify and analyse its specific problems. One of these problems is the life-cycle deskilling process, already shown for certain national cases. This study explores whether this hypothesis also holds in Spain. The perspective used is essentially quantitative, as our analysis is based on the age-profession tables in Spanish population censuses from 1900 to 1970.

A Note on Shapley's convex measure games

L. S. Shapley, in his paper 'Cores of Convex Games', introduces Convex Measure Games, those that are induced by a convex function on R, acting over a measure on the coalitions. But in a note he states that if this function is a function of several variables, then convexity for the function does not imply convexity of the game or even superadditivity. We prove that if the function is directionally convex, the game is convex, and conversely, any convex game can be induced by a directionally convex function acting over measures on the coalitions, with as many measures as players

Nanometer-scale oxidation of Si(100) surfaces by tapping mode atomic force microscopy

The nanometer¿scale oxidation of Si(100) surfaces in air is performed with an atomic force microscope working in tapping mode. Applying a positive voltage to the sample with respect to the tip, two kinds of modifications are induced on the sample: grown silicon oxide mounds less than 5 nm high and mounds higher than 10 nm (which are assumed to be gold depositions). The threshold voltage necessary to produce the modification is studied as a function of the average tip¿to¿sample distance.

The Impact of Monetary Union on EU-15 Sovereign Debt Yield Spreads

With European Monetary Union (EMU), there was an increase in the adjusted spreads (corrected from the foreign exchange risk) of euro participating countries' sovereign securities over Germany and a decrease in those of non-euro countries. The objective of this paper is to study the reasons for this result, and in particular, whether the change in the price assigned by markets was due to domestic factors such as credit risk and/or market liquidity, or to international risk factors. The empirical evidence suggests that market size scale economies have increased since EMU for all European markets, so the effect of the various risk factors, even though it differs between euro and non-euro countries, is always dependent on the size of the market.

Generational effects on adult height in individual heterogeneity

As adult height is a well-established retrospective measure of health and standard of living, it is important to understand the factors that determine it. Among them, the influence of socio-environmental factors has been subjected to empirical scrutiny. This paper explores the influence of generational (or environmental) effects and individual and gender-specific heterogeneity on adult height. Our data set is from contemporary Spain, a country governed by an authoritarian regime between 1939 and 1977. First, we use normal position and quantile regression analysis to identify the determinants of self-reported adult height and to measure the influence of individual heterogeneity. Second, we use a Blinder-Oaxaca decomposition approach to explain the `gender height gap¿ and its distribution, so as to measure the influence on this gap of individual heterogeneity. Our findings suggest a significant increase in adult height in the generations that benefited from the country¿s economic liberalization in the 1950s, and especially those brought up after the transition to democracy in the 1970s. In contrast, distributional effects on height suggest that only in recent generations has ¿height increased more among the tallest¿. Although the mean gender height gap is 11 cm, generational effects and other controls such as individual capabilities explain on average roughly 5% of this difference, a figure that rises to 10% in the lowest 10% quantile.

Keep on moving from English to Catalan : El determinisme lingüístic en la traducció del moviment

El propòsit d'aquest treball és fixar, basant-nos en l'anàlisi tipològica, les diferències lingüístiques en la construcció de les expressions de moviment de l'anglès i el català. Partim de la hipòtesi que en funció de l'origen de la llengua, s'apliquen solucions diferents a determinats problemes lingüístics que apareixen a l'hora de traduir un discurs. Analitzarem, doncs, el grau de fidelitat de la traducció quant a l'expressió del trajecte i de la manera. Per consegüent, estudiarem si hi ha cap pèrdua d'informació, de qualitat o de genuïnitat en relació amb el text original servint-nos de la comparació d'ambdós estils narratius.

Thermally-Induced Structural Transformations on Polymorphous Silicon

Polymorphous Si is a nanostructured form of hydrogenated amorphous Si that contains a small fraction of Si nanocrystals or clusters. Its thermally induced transformations such as relaxation, dehydrogenation, and crystallization have been studied by calorimetry and evolved gas analysis as a complementary technique. The observed behavior has been compared to that of conventional hydrogenated amorphous Si and amorphous Si nanoparticles. In the temperature range of our experiments (650700 C), crystallization takes place at almost the same temperature in polymorphous and in amorphous Si. In contrast, dehydrogenation processes reflect the presence of different hydrogen states. The calorimetry and evolved gas analysis thermograms clearly show that polymorphous Si shares hydrogen states of both amorphous Si and Si nanoparticles. Finally, the total energy of the main SiH group present in polymorphous Si has been quantified

Enhancement of oxidation rate of a-Si nanoparticles during dehydrogenation

Oxidation of amorphous silicon (a-Si) nanoparticles grown by plasma-enhanced chemical vapor deposition were investigated. Their hydrogen content has a great influence on the oxidation rate at low temperature. When the mass gain is recorded during a heating ramp in dry air, an oxidation process at low temperature is identified with an onset around 250°C. This temperature onset is similar to that of hydrogen desorption. It is shown that the oxygen uptake during this process almost equals the number of hydrogen atoms present in the nanoparticles. To explain this correlation, we propose that oxidation at low temperature is triggered by the process of hydrogen desorption

The effect of pesticides and alien invesive species on soil biota and litter decomposition rates in a Mediterrean-climate ecosystem of Western Australia

Ecosystems are complex systems and changing one of their components can alter their whole functioning. Decomposition and biodiversity are two factors that play a role in this stability, and it is vital to study how these two factors are interrelated and how other factors, whether of human origin or not, can affect them. This study has tested different hypotheses regarding the effects of pesticides and invasive species on the biodiversity of the soil fauna and litter decomposition rate. Decomposition was measured using the litterbags technique. Our results indicate that pesticides had a negative effect on decomposition whereas invasive species increased decomposition rate. At the same time, the diversity of the soil biota was unaffected by either factor. These results allow us to better understand the response of important ecosystem functions to human‐induced alterations, in order to mitigate harmful effects or restore them wherever necessary.

La situación de la venta de contenidos on line en España: un estudio del lector de prensa digital

Actualmente es una realidad la dificultad del cobro por servicios on line. Sobre todo si estos servicios son de carácter generalista y se reproducen en muchos sitios web. Las actuales iniciativas de algunos periódicos para cobrar no tienen todavía el suficiente valor añadido para que los usuarios paguen. Muchas veces el tráfico que pierden, y por lo tanto los ingresos de publicidad on line que dejan de ingresar, representan una mayor cantidad económica que el dinero que les suponen las nuevas suscripciones. En el presente trabajo se pretende estudiar el comportamiento de los lectores de diarios on line, identificando cuales son los principales elementos que este tipo de lectores valoran para posteriormente realizar una buena estrategia de contenidos de pago.

The Impact of ICTs on Lecturer and Student Interaction in University Education Processes

Interaction is a basic element in any educational process, and it is something that needs to be reconsidered in the light of technology. In order to examine the methodological changes that ICTs bring to teaching from an interaction perspective, a study was carried out at the University of Lleida to observe interaction processes in various face-to-face, blended learning and e-learning subjects. The methodological design was based on three data collection techniques: documentary analysis of subject curricula, lecturer and student questionnaires, and lecturer interviews. The data showed that, as the online component of subjects increased, the lecturers and students used more technological tools to communicate (e-mail, forums, chats, social networks, etc.). Furthermore, we found that the lecturers and students basically communicated for academic purposes. While they hardly ever communicated for personal reasons (guidance, support, etc.), they claimed that closer contact with a non-academic focus would be preferable. We also observed that the students’ work was more individual in e-learning subjects. Although there is still a considerable way to go in ICT-mediated lecturer-student interaction, both the lecturers and students recognise the potential of such technologies, even though they still do not use them as they feel they should.

Progress in a-Si:H/c-Si heterojunction emitters obtained by Hot-Wire CVD at 200°C

In this work, we investigate heterojunction emitters deposited by Hot-Wire CVD on p-type crystalline silicon. The emitter structure consists of an n-doped film (20 nm) combined with a thin intrinsic hydrogenated amorphous silicon buffer layer (5 nm). The microstructure of these films has been studied by spectroscopic ellipsometry in the UV-visible range. These measurements reveal that the microstructure of the n-doped film is strongly influenced by the amorphous silicon buffer. The Quasy-Steady-State Photoconductance (QSS-PC) technique allows us to estimate implicit open-circuit voltages near 700 mV for heterojunction emitters on p-type (0.8 Ω·cm) FZ silicon wafers. Finally, 1 cm 2 heterojunction solar cells with 15.4% conversion efficiencies (total area) have been fabricated on flat p-type (14 Ω·cm) CZ silicon wafers with aluminum back-surface-field contact.