Control of optical fields and single photon emitters by advanced nanoantenna structures

The control of optical fields on the nanometre scale is becoming an increasingly important tool in many fields, ranging from channelling light delivery in photovoltaics and light emitting diodes to increasing the sensitivity of chemical sensors to single molecule levels. The ability to design and manipulate light fields with specific frequency and space characteristics is explored in this project. We present an alternative realisation of Extraordinary Optical Transmission (EOT) that requires only a single aperture and a coupled waveguide. We show how this waveguide-resonant EOT improves the transmissivity of single apertures. An important technique in imaging is Near-Field Scanning Optical Microscopy (NSOM); we show how waveguide-resonant EOT and the novel probe design assist in improving the efficiency of NSOM probes by two orders of magnitude, and allow the imaging of single molecules with an optical resolution of as good as 50 nm. We show how optical antennas are fabricated into the apex of sharp tips and can be used in a near-field configuration.

Open to the users' needs : combining user-centered design, standards and open source software

This case study introduces our continuous work to enhance the virtual classroom in order to provide faculty and students with an environment open to their needs, compliant with learning standards and, therefore compatible with other e-learning environments, and based on open source software. The result is a modulable, sustainable and interoperable learning environment that can be adapted to different teaching and learning situations by incorporating the LMS integrated tools as well as wikis, blogs, forums and Moodle activities among others.

Urban design proposes for the norwegian cities

Alta is the biggest city in the country of Finnmark. The area of study, Bossekop, is situated 4km from the city centre. It has some commercial areas, offices, hotels and housing, mostly single family housing. The most important Norwegian road, E6 goes through Bossekop, there for it has a big traffic flow. The concept builds on the idea of two axis, one local leading from the local sports development area into the centre core, and one on a higher level, the E6. In Bodø, after analysing carefully the surroundings we reached the conclusion that it is posssible to conserve a lot of the green as well as offering the municipalities the chance to develop with several housing typologies. Nature should be preserved and with this connect directly the mountain to the sea, using the existing creek to make the water connection. In order to keep a big part of this land untouched, we suggest that the rest of the site can be developed quite densely in one of the areas and then continuously fading out in direction of the mountains. Finnsnes is an important communication point for the region with its good connections. In that way it is becoming a central point for commerce and leisure. The concept is based on the wish from the municipality of Lenvik to look upon the city’s connection to the surrounding sea and green areas, together with the wish to make the pedestrian access better and the car traffic lighter., and in that way improve the conditions in the city

Estimation of zero-sequence impedance of undergrounds cables for single-phase fault location in distribution systems with electric arc

This paper focus on the problem of locating single-phase faults in mixed distribution electric systems, with overhead lines and underground cables, using voltage and current measurements at the sending-end and sequence model of the network. Since calculating series impedance for underground cables is not as simple as in the case of overhead lines, the paper proposes a methodology to obtain an estimation of zero-sequence impedance of underground cables starting from previous single-faults occurred in the system, in which an electric arc occurred at the fault location. For this reason, the signal is previously pretreated to eliminate its peaks voltage and the analysis can be done working with a signal as close as a sinus wave as possible

The implementation of liquid chromatography tandem mass spectrometry for the official control of lipophilic toxins in seafood: Single-laboratory validation under four chromatographic conditions

We performed a comprehensive study to assess the fit for purpose of four chromatographic conditions for the determination of six groups of marine lipophilic toxins (okadaic acid and dinophysistoxins, pectenotoxins, azaspiracids, yessotoxins, gymnodimine and spirolides) by LC-MS/MS to select the most suitable conditions as stated by the European Union Reference Laboratory for Marine Biotoxins (EURLMB). For every case, the elution gradient has been optimized to achieve a total run-time cycle of 12 min. We performed a single-laboratory validation for the analysis of three relevant matrices for the seafood aquaculture industry (mussels, pacific oysters and clams), and for sea urchins for which no data about lipophilic toxins have been reported before. Moreover, we have compared the method performance under alkaline conditions using two quantification strategies: the external standard calibration (EXS) and the matrix-matched standard calibration (MMS). Alkaline conditions were the only scenario that allowed detection windows with polarity switching in a 3200 QTrap mass spectrometer, thus the analysis of all toxins can be accomplished in a single run, increasing sample throughput. The limits of quantification under alkaline conditions met the validation requirements established by the EURLMB for all toxins and matrices, while the remaining conditions failed in some cases. The accuracy of the method and the matrix effects where generally dependent on the mobile phases and the seafood species. The MMS had a moderate positive impact on method accuracy for crude extracts, but it showed poor trueness for seafood species other than mussels when analyzing hydrolyzed extracts. Alkaline conditions with EXS and recovery correction for OA were selected as the most proper conditions in the context of our laboratory. This comparative study can help other laboratories to choose the best conditions for the implementation of LC-MS/MS according to their own necessities.

Leveraging explicitly disclosed location information to understand tourist dynamics: a case study

In recent years, the large deployment of mobile devices has led to a massiveincrease in the volume of records of where people have been and when they were there.The analysis of these spatio-temporal data can supply high-level human behaviorinformation valuable to urban planners, local authorities, and designer of location-basedservices. In this paper, we describe our approach to collect and analyze the history ofphysical presence of tourists from the digital footprints they publicly disclose on the web.Our work takes place in the Province of Florence in Italy, where the insights on thevisitors’ flows and on the nationalities of the tourists who do not sleep in town has beenlimited to information from survey-based hotel and museums frequentation. In fact, mostlocal authorities in the world must face this dearth of data on tourist dynamics. In thiscase study, we used a corpus of geographically referenced photos taken in the provinceby 4280 photographers over a period of 2 years. Based on the disclosure of the locationof the photos, we design geovisualizations to reveal the tourist concentration and spatiotemporalflows. Our initial results provide insights on the density of tourists, the points ofinterests they visit as well as the most common trajectories they follow.

A multicase study for the evaluation of a pattern-based visual design process for collaborative learning

Collage is a pattern-based visual design authoring tool for the creation of collaborative learning scripts computationally modelled with IMS Learning Design (LD). The pattern-based visual approach aims to provide teachers with design ideas that are based on broadly accepted practices. Besides, it seeks hiding the LD notation so that teachers can easily create their own designs. The use of visual representations supports both the understanding of the design ideas and the usability of the authoring tool. This paper presents a multicase study comprising three different cases that evaluate the approach from different perspectives. The first case includes workshops where teachers use Collage. A second case implies the design of a scenario proposed by a third-party using related approaches. The third case analyzes a situation where students follow a design created with Collage. The cross-case analysis provides a global understanding of the possibilities and limitations of the pattern-based visual design approach.

Symbolic meaning of local identity – A case study on Barcelona place brand representation

The core objective of this research process was to design an operational tool for place brand analysis. By modelling the emotional significance and the deeper-lying symbols associated to a specific place identity I expected to create a semiotic tool that could be applied, mutatis mutandis, on other similar place brands. As a field case study to develop the instrument, my choice of the research arena was Barcelona city, the capital of Catalonia Autonomous Community, Spain. Barcelona brand identity was approached in the line of the Chicago Urban Anthropology School. The research methods were designed according to the prescriptions of the urban anthropology, namely qualitative methods: in-depth interviews and discourse analysis. The final research outcome was a model summarizing a range of specific emotional values that support a place brand to position in the collective mindset and to assume a positively valued status and identity in the world order.

Experimental design on the simplex

Optimum experimental designs depend on the design criterion, the model andthe design region. The talk will consider the design of experiments for regressionmodels in which there is a single response with the explanatory variables lying ina simplex. One example is experiments on various compositions of glass such asthose considered by Martin, Bursnall, and Stillman (2001).Because of the highly symmetric nature of the simplex, the class of models thatare of interest, typically Scheff´e polynomials (Scheff´e 1958) are rather differentfrom those of standard regression analysis. The optimum designs are also ratherdifferent, inheriting a high degree of symmetry from the models.In the talk I will hope to discuss a variety of modes for such experiments. ThenI will discuss constrained mixture experiments, when not all the simplex is availablefor experimentation. Other important aspects include mixture experimentswith extra non-mixture factors and the blocking of mixture experiments.Much of the material is in Chapter 16 of Atkinson, Donev, and Tobias (2007).If time and my research allows, I would hope to finish with a few comments ondesign when the responses, rather than the explanatory variables, lie in a simplex.ReferencesAtkinson, A. C., A. N. Donev, and R. D. Tobias (2007). Optimum ExperimentalDesigns, with SAS. Oxford: Oxford University Press.Martin, R. J., M. C. Bursnall, and E. C. Stillman (2001). Further results onoptimal and efficient designs for constrained mixture experiments. In A. C.Atkinson, B. Bogacka, and A. Zhigljavsky (Eds.), Optimal Design 2000,pp. 225–239. Dordrecht: Kluwer.Scheff´e, H. (1958). Experiments with mixtures. Journal of the Royal StatisticalSociety, Ser. B 20, 344–360.1

The organization of research corporations and researcher ability

This paper analyzes the formation of Research Corporations as an alternative governance structure for performing R&D compared to pursuing in-house R&D projects. Research Corporations are privatefor-profit research centers that bring together several firms with similar research goals. In a Research Corporation formal authority over the choice of projects is jointly exercised by the top management of the member firms. A private for-profit organization cannot commit not to interfere with the project choice of the researchers. However, increasing the number of member firms of the Research Corporation reduces the incentive of member firms to meddle with the research projects of researchers because exercising formal authority over the choice of research projects is a public good. The Research Corporation thus offers researchers greater autonomy than a single firm pursuing an identical research program in its in-house R&D department. This attracts higher ability researchers to the Research Corporation compared to the internal R&D department. The paper uses the theoretical model to analyze the organization of the Microelectronics and Computer Technology Corporation (MCC). The facts of this case confirm the existence of a tension between control over the choice of research projects and the ability of researchers that the organization is able to attract or hold onto.

Are agent-based simulations robust? The wholesale electricity trading case

Agent-based computational economics is becoming widely used in practice. This paperexplores the consistency of some of its standard techniques. We focus in particular on prevailingwholesale electricity trading simulation methods. We include different supply and demandrepresentations and propose the Experience-Weighted Attractions method to include severalbehavioural algorithms. We compare the results across assumptions and to economic theorypredictions. The match is good under best-response and reinforcement learning but not underfictitious play. The simulations perform well under flat and upward-slopping supply bidding,and also for plausible demand elasticity assumptions. Learning is influenced by the number ofbids per plant and the initial conditions. The overall conclusion is that agent-based simulationassumptions are far from innocuous. We link their performance to underlying features, andidentify those that are better suited to model wholesale electricity markets.

La Crema: A case study of mutual fire insurance

We analyze a mutual fire insurance mechanism usedin Andorra, which is called La Crema in the locallanguage. This mechanism relies on households'announced property values to determine how much ahousehold is reimbursed in the case of a fire andhow payments are apportioned among other households.The only Pareto eficient allocation reachablethrough the mechanism requires that all householdshonestly report the true value of their property.However, such honest reporting is not an equilibriumexcept in the extreme case where the property valuesare identical for all households. Nevertheless, as the size of the society becomes large, thebenefits from deviating from truthful reportingvanish, and all of the non-degenerate equilibriaof the mechanism are nearly truthful andapproximately Pareto efficient.

Application of a support system to the design of wastewater treatment plants

This paper presents a case study that explores the advantages that can be derived from the use of a design support system during the design of wastewater treatment plants (WWTP). With this objective in mind a simplified but plausible WWTP design case study has been generated with KBDS, a computer-based support system that maintains a historical record of the design process. The study shows how, by employing such a historical record, it is possible to: (1) rank different design proposals responding to a design problem; (2) study the influence of changing the weight of the arguments used in the selection of the most adequate proposal; (3) take advantage of keywords to assist the designer in the search of specific items within the historical records; (4) evaluate automatically thecompliance of alternative design proposals with respect to the design objectives; (5) verify the validity of previous decisions after the modification of the current constraints or specifications; (6) re-use the design records when upgrading an existing WWTP or when designing similar facilities; (7) generate documentation of the decision making process; and (8) associate a variety of documents as annotations to any component in the design history. The paper also shows one possible future role of design support systems as they outgrow their current reactive role as repositories of historical information and start to proactively support the generation of new knowledge during the design process

Frequency resolved admittance spectroscopy measurements on In0.52Al0.48As/InxGa1¿xAs/In0.52Al0.48As single quantum well structures

In this work a new admittance spectroscopy technique is proposed to determine the conduction band offset in single quantum well structures (SQW). The proposed technique is based on the study of the capacitance derivative versus the frequency logarithm. This method is found to be less sensitive to parasitic effects, such as leakage current and series resistance, than the classical conductance analysis. Using this technique, we have determined the conduction band offset in In0.52Al0.48As/InxGa1¿xAs/In0.52Al0.48As SQW structures. Two different well compositions, x=0.53, which corresponds to the lattice¿matched case and x=0.60, which corresponds to a strained case, and two well widths (5 and 25 nm) have been considered. The average results are ¿Ec=0.49±0.04 eV for x=0.53 and ¿Ec =0.51±0.04 eV for x=0.6, which are in good agreement with previous reported data.

Thermal modeling and management in ultrathin chip stack technology

This paper presents a thermal modeling for power management of a new three-dimensional (3-D) thinned dies stacking process. Besides the high concentration of power dissipating sources, which is the direct consequence of the very interesting integration efficiency increase, this new ultra-compact packaging technology can suffer of the poor thermal conductivity (about 700 times smaller than silicon one) of the benzocyclobutene (BCB) used as both adhesive and planarization layers in each level of the stack. Thermal simulation was conducted using three-dimensional (3-D) FEM tool to analyze the specific behaviors in such stacked structure and to optimize the design rules. This study first describes the heat transfer limitation through the vertical path by examining particularly the case of the high dissipating sources under small area. First results of characterization in transient regime by means of dedicated test device mounted in single level structure are presented. For the design optimization, the thermal draining capabilities of a copper grid or full copper plate embedded in the intermediate layer of stacked structure are evaluated as a function of the technological parameters and the physical properties. It is shown an interest for the transverse heat extraction under the buffer devices dissipating most the power and generally localized in the peripheral zone, and for the temperature uniformization, by heat spreading mechanism, in the localized regions where the attachment of the thin die is altered. Finally, all conclusions of this analysis are used for the quantitative projections of the thermal performance of a first demonstrator based on a three-levels stacking structure for space application.