A Comparative analysis of oil production setors in Saudi Arabia and the United Arab Emirates

Aquest article s'aplica un enfocament comparatiu de la gestió del sector petrolier en dos països rics en petroli a l'Orient Mitjà: Aràbia Saudita i els Emirats Àrabs Units (EAU). Més explícitament, s'examinen els factors que millor expliquen la variació en les estratègies que han vingut aplicant en el sector des de l'establiment de les seves empreses petrolieres nacionals (NOC). Recorrent a la literatura sobre expropiació / privatització en el camp d'Estudis de l'Energia, en aquest treball es proposa un marc teòric per analitzar la lògica que hi ha al darrera de les diferents formes d'exploració i les estratègies de producció en el sector petrolier. Teòricament, aquesta investigació té com a objectiu avançar en un conjunt d'eines d'anàlisi per abordar millor i entendre els determinants reals del procés de presa de decisions en el upstream. Empíricament, el model es prova en els casos divergents d'Aràbia Saudita i els Emirats Àrabs Units, i una sèrie de lliçons s'han extret. En última instància, aquest treball ha d'augmentar la conscienciació entre els erudits i els polític, tant sobre el poc coneixement que tenim sobre els mecanismes interns que impulsen les estratègies ascendents en el majors estats productor de petroli.

Proposta d’una metodologia pràctica: càlcul de potencialitats de captació de carboni en sistemes agroforestals a l'APA Itacaré/Serra Grande, Bahía- Brasil

En aquest projecte s’ha treballat amb una entitat no governamental, que es troba en la regió de Bahia (Brasil). L’associació “Mecenas da Vida” és una ONG que treballa en l’àmbit de la conservació del medi natural, fent partícips la pròpia població local. Petits agricultors dels municipis d’Itacaré i Uruçuca a l’Estat de Bahia que formen part del projecte, realitzen pràctiques conservacionistes i en compensació reben un pagament, per aquests serveis. Aquests diners provenen d’una taxa voluntària que paguen alguns empresaris turístics dels mateixos municipis. Pagant aquest import, els empresaris obtenen un segell distintiu que acredita la compensació de les seves emissions de CO2. El projecte tracta d’aportar un model de càlcul més específic al seuprograma de neutralització de carboni, amb sistemes agroforestals (SAF).No s’han trobat fonts d’informació sobre monitoratge de carboni en SAF en aquesta regió

Estudi del contingut en compostos nitrogenats del most de D.O. Empordà i la seva relació amb diferents varietats i condicions climàtiques

El nitrogen i totes les seves possibles formes són un component important en la composició del most i juga un paper fonamental en la transformació del most en vi. El seu contingut al most es pot veure que varia a través de molts factors externs a la planta, ja sigui per l’acció de l’home o per causes alienes a ell. Es per aquesta raó que els objectius del treball són els següents: - Determinació de la concentració de tres tipus de compostos nitrogenats que es troben al most (NTOTAL, NASSIMILABLE, NORGÀNIC). - Comparació dels resultats dels diferents compostos en relació d’altres mostres analitzades en d’altres zones. - Influència que hi ha entre la meteorologia i la concentració de compostos nitrogenats que formen el raïm. Aquests, doncs, són els objectius del projecte ja que aquests compostos nitrogenats són de gran importància en la dinàmica fermentativa del most, i segons les dades consultades no s’hauria efectuat cap estudi similar en mostos de l’Empordà

Runaway Greenhouse Effect in a Semigray Radiative-Convective Model

The effects of the nongray absorption (i.e., atmospheric opacity varying with wavelength) on the possible upper bound of the outgoing longwave radiation (OLR) emitted by a planetary atmosphere have been examined. This analysis is based on the semigray approach, which appears to be a reasonable compromise between the complexity of nongray models and the simplicity of the gray assumption (i.e., atmospheric absorption independent of wavelength). Atmospheric gases in semigray atmospheres make use of constant absorption coefficients in finite-width spectral bands. Here, such a semigray absorption is introduced in a one-dimensional (1D) radiative– convective model with a stratosphere in radiative equilibrium and a troposphere fully saturated with water vapor, which is the semigray gas. A single atmospheric window in the infrared spectrum has been assumed. In contrast to the single absolute limit of OLR found in gray atmospheres, semigray ones may also show a relative limit. This means that both finite and infinite runaway effects may arise in some semigray cases. Of particular importance is the finding of an entirely new branch of stable steady states that does not appear in gray atmospheres. This new multiple equilibrium is a consequence of the nongray absorption only. It is suspected that this new set of stable solutions has not been previously revealed in analyses of radiative–convective models since it does not appear for an atmosphere with nongray parameters similar to those for the earth’s current state

The effect of atmospheric absorption of sunlight on the runaway greenhouse point

The longwave emission of planetary atmospheres that contain a condensable absorbing gas in the infrared (i.e., longwave), which is in equilibrium with its liquid phase at the surface, may exhibit an upper bound. Here we analyze the effect of the atmospheric absorption of sunlight on this radiation limit. We assume that the atmospheric absorption of infrared radiation is independent of wavelength except within the spectral width of the atmospheric window, where it is zero. The temperature profile in radiative equilibrium is obtained analytically as a function of the longwave optical thickness. For illustrative purposes, numerical values for the infrared atmospheric absorption (i.e., greenhouse effect) and the liquid vapor equilibrium curve of the condensable absorbing gas refer to water. Values for the atmospheric absorption of sunlight (i.e., antigreenhouse effect) take a wide range since our aim is to provide a qualitative view of their effects. We find that atmospheres with a transparent region in the infrared spectrum do not present an absolute upper bound on the infrared emission. This result may be also found in atmospheres opaque at all infrared wavelengths if the fraction of absorbed sunlight in the atmosphere increases with the longwave opacity

Directiva comunitaria: comparación de textos (EN-ES)

El presente trabajo se inscribe en el ámbito de la traducción especializada jurídico-económica inglés-español. El documento objeto de estudio es una Directiva del Parlamento Europeo y de la Comisión, por ende, pertenece al ordenamiento jurídico comunitario. El tema que trataremos es el régimen para el comercio de derechos de emisión de gases de efecto invernadero.

El fogony: l'efecte föhn al Pallars Sobirà

Treball de recerca realitzat per alumnes d’ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l’any 2010. L’objectiu pròpiament dit d'aquest treball de recerca era que l'alumne desenvolupés una tasca d'identificació en el temps d'un fenomen meteorològic, i que posteriorment l'analitzés, estadísticament d'una banda (per a observar el comportament del mateix) i per comparació amb un treball anterior, d'una altra. La recerca, per tant, es fonamentava en dos punts: la caracterització actual i l'observació de l'evolució del fenomen de l’efecte Föhn (que al Pallars Sobirà és conegut com Fogony ) en un registre temporal ampli, cosa que a més a més podia ser útil per a determinar indicis de canvi climàtic. El treball ha permès avançar en el coneixement del fenomen al Pallars Sobirà, i s'han obtingut una sèrie de noves dades que actualitzen i corregeixen el paradigma del fenomen, ja que el treball anterior sobre el que es pretenia establir comparacions no feia una caracterització adequada.

Efectes de l’altura solar, la nuvolositat i la temperatura en les mesures dels piranòmetres de silici = Efectos de la altura solar, la nubosidad y la temperatura en las medidas de los piranometros de silicio

La mesura de la irradiància solar en superfície es fa mitjançant piranòmetres amb sensor termoelèctric o amb sensor de silici. Aquests darrers presenten una resposta espectral no uniforme i limitada a la banda de 400 a 1100 nm, i, a més, la seva sensibilitat depèn fortament de la temperatura. Els piranòmetres termoelèctrics, en canvi, presenten una resposta espectral uniforme en la banda solar, i un coeficient de temperatura reduït. L’objectiu de l’estudi que es presenta ha estat millorar l’acord entre les mesures d’irradiància global preses amb un piranòmetre termoelèctric CM11 de Kipp & Zonen, i diversos piranòmetres fotovoltaics o de silici Li200SA de Li-Cor. Com que la resposta angular dels sensors s’aparta en general de la resposta cosinus ideal, es proposen unes correccions a tal efecte. S’han analitzat les dades minutals corresponents a un cicle anual de mesures d’irradiància preses pels dos tipus de piranòmetres a l’estació radiomètrica de la Universitat de Girona. Les correccions proposades per la resposta angular dels instruments es basen en bibliografia prèvia, i també en simulacions realitzades amb un model espectral de transferència radiativa multicapa. La simulació ha permès obtenir correccions per compensar les diferents respostes angulars i espectrals dels dos tipus d’instruments. Per a cels serens, les correccions angulars i espectrals milloren notablement l’acord entre les mesures dels dos tipus de piranòmetres. També es proposa una correcció de l’efecte de la temperatura sobre la mesura dels piranòmetres de silici, obtinguda empíricament. Malgrat que les correccions s’han obtingut per a cels serens, han estat també aplicades a condicions de cel ennuvolat, caracteritzades objectivament mitjançant un algorisme basat en mesures d’irradiància global i difusa. Finalment s’ha comprovat que les correccions també milloren l’acord entre les mesures dels dos tipus de sensors independentment de l’extensió de la coberta de núvols

Feature Extraction from Whole-Sky Ground-Based Images for Cloud-Type Recognition

Several features that can be extracted from digital images of the sky and that can be useful for cloud-type classification of such images are presented. Some features are statistical measurements of image texture, some are based on the Fourier transform of the image and, finally, others are computed from the image where cloudy pixels are distinguished from clear-sky pixels. The use of the most suitable features in an automatic classification algorithm is also shown and discussed. Both the features and the classifier are developed over images taken by two different camera devices, namely, a total sky imager (TSI) and a whole sky imager (WSC), which are placed in two different areas of the world (Toowoomba, Australia; and Girona, Spain, respectively). The performance of the classifier is assessed by comparing its image classification with an a priori classification carried out by visual inspection of more than 200 images from each camera. The index of agreement is 76% when five different sky conditions are considered: clear, low cumuliform clouds, stratiform clouds (overcast), cirriform clouds, and mottled clouds (altocumulus, cirrocumulus). Discussion on the future directions of this research is also presented, regarding both the use of other features and the use of other classification techniques

Stationarity analysis of historical flood series in France and Spain (14th-20th centuries)

Interdisciplinary frameworks for studying natural hazards and their temporal trends have an important potential in data generation for risk assessment, land use planning, and therefore the sustainable management of resources. This paper focuses on the adjustments required because of the wide variety of scientific fields involved in the reconstruction and characterisation of flood events for the past 1000 years. The aim of this paper is to describe various methodological aspects of the study of flood events in their historical dimension, including the critical evaluation of old documentary and instrumental sources, flood-event classification and hydraulic modelling, and homogeneity and quality control tests. Standardized criteria for flood classification have been defined and applied to the Isère and Drac floods in France, from 1600 to 1950, and to the Ter, the Llobregat and the Segre floods, in Spain, from 1300 to 1980. The analysis on the Drac and Isère data series from 1600 to the present day showed that extraordinary and catastrophic floods were not distributed uniformly in time. However, the largest floods (general catastrophic floods) were homogeneously distributed in time within the period 1600¿1900. No major flood occurred during the 20th century in these rivers. From 1300 to the present day, no homogeneous behaviour was observed for extraordinary floods in the Spanish rivers. The largest floods were uniformly distributed in time within the period 1300-1900, for the Segre and Ter rivers.

A methodology for the classification of convective structures using meteorological radar: Application to heavy rainfall events on the Mediterranean coast of the Iberian Peninsula

During the period 1996-2000, forty-three heavy rainfall events have been detected in the Internal Basins of Catalonia (Northeastern of Spain). Most of these events caused floods and serious damage. This high number leads to the need for a methodology to classify them, on the basis of their surface rainfall distribution, their internal organization and their physical features. The aim of this paper is to show a methodology to analyze systematically the convective structures responsible of those heavy rainfall events on the basis of the information supplied by the meteorological radar. The proposed methodology is as follows. Firstly, the rainfall intensity and the surface rainfall pattern are analyzed on the basis of the raingauge data. Secondly, the convective structures at the lowest level are identified and characterized by using a 2-D algorithm, and the convective cells are identified by using a 3-D procedure that looks for the reflectivity cores in every radar volume. Thirdly, the convective cells (3-D) are associated with the 2-D structures (convective rainfall areas). This methodology has been applied to the 43 heavy rainfall events using the meteorological radar located near Barcelona and the SAIH automatic raingauge network.

A limited area model intercomparison on the "Montserrat-2000" flash-flood event using statistical and deterministic methods

In the scope of the European project Hydroptimet, INTERREG IIIB-MEDOCC programme, limited area model (LAM) intercomparison of intense events that produced many damages to people and territory is performed. As the comparison is limited to single case studies, the work is not meant to provide a measure of the different models' skill, but to identify the key model factors useful to give a good forecast on such a kind of meteorological phenomena. This work focuses on the Spanish flash-flood event, also known as "Montserrat-2000" event. The study is performed using forecast data from seven operational LAMs, placed at partners' disposal via the Hydroptimet ftp site, and observed data from Catalonia rain gauge network. To improve the event analysis, satellite rainfall estimates have been also considered. For statistical evaluation of quantitative precipitation forecasts (QPFs), several non-parametric skill scores based on contingency tables have been used. Furthermore, for each model run it has been possible to identify Catalonia regions affected by misses and false alarms using contingency table elements. Moreover, the standard "eyeball" analysis of forecast and observed precipitation fields has been supported by the use of a state-of-the-art diagnostic method, the contiguous rain area (CRA) analysis. This method allows to quantify the spatial shift forecast error and to identify the error sources that affected each model forecasts. High-resolution modelling and domain size seem to have a key role for providing a skillful forecast. Further work is needed to support this statement, including verification using a wider observational data set.

Radar analysis of the life cycle of mesoscale convective systems during the 10 June 2000 event

The 10 June 2000 event was the largest flash flood event that occurred in the Northeast of Spain in the late 20th century, both as regards its meteorological features and its considerable social impact. This paper focuses on analysis of the structures that produced the heavy rainfalls, especially from the point of view of meteorological radar. Due to the fact that this case is a good example of a Mediterranean flash flood event, a final objective of this paper is to undertake a description of the evolution of the rainfall structure that would be sufficiently clear to be understood at an interdisciplinary forum. Then, it could be useful not only to improve conceptual meteorological models, but also for application in downscaling models. The main precipitation structure was a Mesoscale Convective System (MCS) that crossed the region and that developed as a consequence of the merging of two previous squall lines. The paper analyses the main meteorological features that led to the development and triggering of the heavy rainfalls, with special emphasis on the features of this MCS, its life cycle and its dynamic features. To this end, 2-D and 3-D algorithms were applied to the imagery recorded over the complete life cycle of the structures, which lasted approximately 18 h. Mesoscale and synoptic information were also considered. Results show that it was an NS-MCS, quasi-stationary during its stage of maturity as a consequence of the formation of a convective train, the different displacement directions of the 2-D structures and the 3-D structures, including the propagation of new cells, and the slow movement of the convergence line associated with the Mediterranean mesoscale low.

Enhanced radar precipitation estimates using a combined clutter and beam blockage correction technique

Weather radar observations are currently the most reliable method for remote sensing of precipitation. However, a number of factors affect the quality of radar observations and may limit seriously automated quantitative applications of radar precipitation estimates such as those required in Numerical Weather Prediction (NWP) data assimilation or in hydrological models. In this paper, a technique to correct two different problems typically present in radar data is presented and evaluated. The aspects dealt with are non-precipitating echoes - caused either by permanent ground clutter or by anomalous propagation of the radar beam (anaprop echoes) - and also topographical beam blockage. The correction technique is based in the computation of realistic beam propagation trajectories based upon recent radiosonde observations instead of assuming standard radio propagation conditions. The correction consists of three different steps: 1) calculation of a Dynamic Elevation Map which provides the minimum clutter-free antenna elevation for each pixel within the radar coverage; 2) correction for residual anaprop, checking the vertical reflectivity gradients within the radar volume; and 3) topographical beam blockage estimation and correction using a geometric optics approach. The technique is evaluated with four case studies in the region of the Po Valley (N Italy) using a C-band Doppler radar and a network of raingauges providing hourly precipitation measurements. The case studies cover different seasons, different radio propagation conditions and also stratiform and convective precipitation type events. After applying the proposed correction, a comparison of the radar precipitation estimates with raingauges indicates a general reduction in both the root mean squared error and the fractional error variance indicating the efficiency and robustness of the procedure. Moreover, the technique presented is not computationally expensive so it seems well suited to be implemented in an operational environment.

Preliminary results of the Social Impact Research Group of MEDEX: the request database (2000-2002) of two Meteorological Services

One of the aims of the MEDEX project is to improve the knowledge of high-impact weather events in the Mediterranean. According to the guidelines of this project, a pilot study was carried out in two regions of Spain (the Balearic Islands and Catalonia) by the Social Impact Research group of MEDEX. The main goal is to suggest some general and suitable criteria about how to analyse requests received in Meteorological Services arising out of the damage caused by weather events. Thus, all the requests received between 2000 and 2002 at the Servei Meteorològic de Catalunya as well as at the Division of AEMET in the Balearic Islands were analysed. Firstly, the proposed criteria in order to build the database are defined and discussed. Secondly, the temporal distribution of the requests for damage claims is analysed. On average, almost half of them were received during the first month after the event happened. During the first six months, the percentage increases by 90%. Thirdly, various factors are taken into account to determine the impact of specific events on society. It is remarkable that the greatest number of requests is for those episodes with simultaneous heavy rain and strong wind, and finally, those that are linked to high population density.