Short-time dynamics of colloidal suspensions in confined geometries

We analyze the short-time dynamical behavior of a colloidal suspension in a confined geometry. We analyze the relevant dynamical response of the solvent, and derive the temporal behavior of the velocity autocorrelation function, which exhibits an asymptotic negative algebraic decay. We are able to compare quantitatively with theoretical expressions, and analyze the effects of confinement on the diffusive behavior of the suspension.

Periodic orbits of integrable birational maps on the plane: blending dynamics and algebraic geometry, the Lyness' case

Contingut del Pòster presentat al congrés New Trends in Dynamical Systems

Approximate polytope ensemble for one-class classification

In this work, a new one-class classification ensemble strategy called approximate polytope ensemble is presented. The main contribution of the paper is threefold. First, the geometrical concept of convex hull is used to define the boundary of the target class defining the problem. Expansions and contractions of this geometrical structure are introduced in order to avoid over-fitting. Second, the decision whether a point belongs to the convex hull model in high dimensional spaces is approximated by means of random projections and an ensemble decision process. Finally, a tiling strategy is proposed in order to model non-convex structures. Experimental results show that the proposed strategy is significantly better than state of the art one-class classification methods on over 200 datasets.

Reaction-diffusion lattice gas: Theory and computer results

We report on the study of nonequilibrium ordering in the reaction-diffusion lattice gas. It is a kinetic model that relaxes towards steady states under the simultaneous competition of a thermally activated creation-annihilation $(reaction$) process at temperature T, and a diffusion process driven by a heat bath at temperature T?T. The phase diagram as one varies T and T, the system dimension d, the relative priori probabilities for the two processes, and their dynamical rates is investigated. We compare mean-field theory, new Monte Carlo data, and known exact results for some limiting cases. In particular, no evidence of Landau critical behavior is found numerically when d=2 for Metropolis rates but Onsager critical points and a variety of first-order phase transitions.

Computer-simulation study of magnetic relaxation in anisotropic magnetic systems

We present a computer-simulation study of the effect of the distribution of energy barriers in an anisotropic magnetic system on the relaxation behavior of the magnetization. While the relaxation law for the magnetization can be approximated in all cases by a time logarithmic decay, the law for the dependence of the magnetic viscosity with temperature is found to be quite sensitive to the shape of the distribution of barriers. The low-temperature region for the magnetic viscosity never extrapolates to a positive no-null value. Moreover our computer simulation results agree reasonably well with some recent relaxation experiments on highly anisotropic single-domain particles.

SiMR: A simulator for learning computer architecture

This paper presents SiMR, a simulator of the Rudimentary Machine designed to be used in a first course of computer architecture of Software Engineering and Computer Engineering programmes. The Rudimentary Machine contains all the basic elements in a RISC computer, and SiMR allows editing, assembling and executing programmes for this processor. SiMR is used at the Universitat Oberta de Catalunya as one of the most important resources in the Virtual Computing Architecture and Organisation Laboratory, since students work at home with the simulator and reports containing their work are automatically generated to be evaluated by lecturers. The results obtained from a survey show that most of the students consider SiMR as a highly necessary or even an indispensable resource to learn the basic concepts about computer architecture.

Manipulació geomètrica dels blocs d'AutoCAD

Aquest text és un recull de procediments per inserir els blocs d'AutoCAD de forma més eficient, en la resolució de problemes prèviament tipificats: la PRIMERA PART descriu protocols d'actuació que l'usuari haurà d'aplicar manualment, mentre que la SEGONA PART ofereix rutines programades en AutoLISP i VisualLISP que l'eximiran d'aquesta obligació.Si ho deixéssim aquí, però, podria semblar que els mateixos mètodes manuals presentats en primer lloc són després els que AutoLISP automatitza; per això convé aclarir que la problemàtica de la PRIMERA PART, tot i que pròxima a la de la SEGONA, és diferent i reprodueix el contingut d'una monografia (BLOCS I GEOMETRIA: 5 EXERCICIS COMENTATS) que forma part del material de suport a l'assignatura ELEMENTS DE CAD, impartida per l'autor en l'ETS d'Enginyeria de Telecomunicació de Barcelona i que té per objecte cobrir el buit bibliogràfic que es detectava en el vessant geomètric de la inserció de blocs, a diferència del que s'ocupa de l'estructura de dades més adient en cada context (incrustació de dibuixos amb INSERT versus vinculació mitjançant REFX), més profusament tractat, proposant una sistematització tipològica dels casos on l'escala és funció lineal d'una distància.La SEGONA PART va més enllà i amplia el repertori d'AutoCAD amb les ordres GINSERT, RATREDIT, INSERTOK, INS2D, INS3D, BLOQUEOK, DESCOMPOK, DEF-TRANSF, APL-TRANSF-V i APL-TRANSF-N, de les quals INS2D i INS3D (INSERTOK és una versió simplificada de INS2D, per a blocs sense atributs) són l'aportació més innovadora i que més lluny porta les potencialitats de la inserció de blocs: resumint-ho en una frase, es tracta d’aconseguir que la inserció d’un bloc (que pot ser l’original, un bloc constituït per una inserció de l’original o un de constituït per la inserció del precedent) s’encabeixi en un marc prèviament establert, a semblança de les ordres ESCALA o GIRA, que mitjançant l'opció Referencia apliquen als objectes seleccionats la transformació d'escalat o de rotació necessària per tal que un element de referència assoleixi una determinada grandària o posició. Tot i que, per identificar amb encert el nucli del problema, serà inevitable introduir una reflexió: quan s’ha tingut la precaució de referir un bloc 2D a un quadrat unitari ortogonal, inserir-lo de manera que s’adapti a qualsevol marc rectangular establert en el dibuix és immediat, però ja no ho és tant concatenar insercions de manera que, a més d’una combinació simple de escalat, gir i translació, l’operació dugui implícita una transformació de cisallament. Perquè és clar que si inserim el bloc girat i convertim la inserció en un bloc que al seu torn tornem a inserir, ara però amb escalat no uniforme, el transformat del quadrat de referència primitiu serà un paral·lelogram, però el problema és: dibuixat un marc romboïdal concret, ¿quin gir caldrà donar a la primera inserció, i quin gir i factors d’escala caldrà aplicar a la segona perquè el quadrat de referència s’adapti al marc? El problema es complica si, a més, volem aprofitar el resultat de la primera inserció per a d’altres paral·lelograms, organitzant un sistema no redundant de insercions intermèdies. Doncs bé: INS2D i INS3D donen satisfacció a aquestes qüestions (la segona ja no contempla l'encaix en un paral·lelogram, sinó en un paral·lelepípede) i són aplicables a blocs proveïts d’atributs, no només de tipus convencional (els continguts en el pla de base del bloc, únics de funcionament garantit amb l’ordre INSERT), sinó també dels situats i orientats lliurement.

Computer-aided system for morphometric mandibular index computation (Using dental panoramic radiographs)

Objective: We propose and validate a computer aided system to measure three different mandibular indexes: cortical width, panoramic mandibular index and, mandibular alveolar bone resorption index. Study Design: Repeatability and reproducibility of the measurements are analyzed and compared to the manual estimation of the same indexes. Results: The proposed computerized system exhibits superior repeatability and reproducibility rates compared to standard manual methods. Moreover, the time required to perform the measurements using the proposed method is negligible compared to perform the measurements manually. Conclusions: We have proposed a very user friendly computerized method to measure three different morphometric mandibular indexes. From the results we can conclude that the system provides a practical manner to perform these measurements. It does not require an expert examiner and does not take more than 16 seconds per analysis. Thus, it may be suitable to diagnose osteoporosis using dental panoramic radiographs.

Comblike poly(a-alkyl g glutamate)s: computer simulation studies of an intermediate thermal phase.

Monte Carlo (MC) simulations have been used to study the structure of an intermediate thermal phase of poly(R-octadecyl ç,D-glutamate). This is a comblike poly(ç-peptide) able to adopt a biphasic structure that has been described as a layered arrangement of backbone helical rods immersed in a paraffinic pool of polymethylene side chains. Simulations were performed at two different temperatures (348 and 363 K), both of them above the melting point of the paraffinic phase, using the configurational bias MC algorithm. Results indicate that layers are constituted by a side-by-side packing of 17/5 helices. The organization of the interlayer paraffinic region is described in atomistic terms by examining the torsional angles and the end-to-end distances for the octadecyl side chains. Comparison with previously reported comblike poly(â-peptide)s revealed significant differences in the organization of the alkyl side chains.

The role of intramolecular barriers on the glass transition of polymers: computer simulations versus mode coupling theory

We present computer simulations of a simple bead-spring model for polymer melts with intramolecular barriers. By systematically tuning the strength of the barriers, we investigate their role on the glass transition. Dynamic observables are analyzed within the framework of the mode coupling theory (MCT). Critical nonergodicity parameters, critical temperatures, and dynamic exponents are obtained from consistent fits of simulation data to MCT asymptotic laws. The so-obtained MCT λ-exponent increases from standard values for fully flexible chains to values close to the upper limit for stiff chains. In analogy with systems exhibiting higher-order MCT transitions, we suggest that the observed large λ-values arise form the interplay between two distinct mechanisms for dynamic arrest: general packing effects and polymer-specific intramolecular barriers. We compare simulation results with numerical solutions of the MCT equations for polymer systems, within the polymer reference interaction site model (PRISM) for static correlations. We verify that the approximations introduced by the PRISM are fulfilled by simulations, with the same quality for all the range of investigated barrier strength. The numerical solutions reproduce the qualitative trends of simulations for the dependence of the nonergodicity parameters and critical temperatures on the barrier strength. In particular, the increase in the barrier strength at fixed density increases the localization length and the critical temperature. However the qualitative agreement between theory and simulation breaks in the limit of stiff chains. We discuss the possible origin of this feature.

Computer-aided system for morphometric mandibular index computation (Using dental panoramic radiographs)

Objective: We propose and validate a computer aided system to measure three different mandibular indexes: cortical width, panoramic mandibular index and, mandibular alveolar bone resorption index. Study Design: Repeatability and reproducibility of the measurements are analyzed and compared to the manual estimation of the same indexes. Results: The proposed computerized system exhibits superior repeatability and reproducibility rates compared to standard manual methods. Moreover, the time required to perform the measurements using the proposed method is negligible compared to perform the measurements manually. Conclusions: We have proposed a very user friendly computerized method to measure three different morphometric mandibular indexes. From the results we can conclude that the system provides a practical manner to perform these measurements. It does not require an expert examiner and does not take more than 16 seconds per analysis. Thus, it may be suitable to diagnose osteoporosis using dental panoramic radiographs

On the computation of reducible invariant tori on a parallel computer

We present an algorithm for the computation of reducible invariant tori of discrete dynamical systems that is suitable for tori of dimensions larger than 1. It is based on a quadratically convergent scheme that approximates, at the same time, the Fourier series of the torus, its Floquet transformation, and its Floquet matrix. The Floquet matrix describes the linearization of the dynamics around the torus and, hence, its linear stability. The algorithm presents a high degree of parallelism, and the computational effort grows linearly with the number of Fourier modes needed to represent the solution. For these reasons it is a very good option to compute quasi-periodic solutions with several basic frequencies. The paper includes some examples (flows) to show the efficiency of the method in a parallel computer. In these flows we compute invariant tori of dimensions up to 5, by taking suitable sections.

Validation of a computer-assisted system on classifying lower third molars

Objectives: The present study evaluates the reliability of the Radio Memory® software (Radio Memory; Belo Horizonte,Brasil.) on classifying lower third molars, analyzing intra- and interexaminer agreement of the results. Study Design: An observational, descriptive study of 280 lower third molars was made. The corresponding orthopantomographs were analyzed by two examiners using the Radio Memory® software. The exam was repeated 30 days after the first observation by each examiner. Both intra- and interexaminer agreement were determined using the SPSS v 12.0 software package for Windows (SPSS; Chicago, USA). Results: Intra- and interexaminer agreement was shown for both the Pell & Gregory and the Winter classifications, p<0.01, with 99% significant correlation between variables in all the cases. Conclusions: The use of Radio Memory® software for the classification of lower third molars is shown to be a valid alternative to the conventional method (direct evaluation on the orthopantomograph), for both clinical and investigational applications.