74 resultados para quantity surveying
Resumo:
The availability of rich firm-level data sets has recently led researchers to uncover new evidence on the effects of trade liberalization. First, trade openness forces the least productive firms to exit the market. Secondly, it induces surviving firms to increase their innovation efforts and thirdly, it increases the degree of product market competition. In this paper we propose a model aimed at providing a coherent interpretation of these findings. We introducing firm heterogeneity into an innovation-driven growth model, where incumbent firms operating in oligopolistic industries perform cost-reducing innovations. In this framework, trade liberalization leads to higher product market competition, lower markups and higher quantity produced. These changes in markups and quantities, in turn, promote innovation and productivity growth through a direct competition effect, based on the increase in the size of the market, and a selection effect, produced by the reallocation of resources towards more productive firms. Calibrated to match US aggregate and firm-level statistics, the model predicts that a 10 percent reduction in variable trade costs reduces markups by 1:15 percent, firm surviving probabilities by 1 percent, and induces an increase in productivity growth of about 13 percent. More than 90 percent of the trade-induced growth increase can be attributed to the selection effect.
Resumo:
S’ha estudiat el grau de protecció física del carboni dins d’agregats de diferents mides en un sòl d’una pedrera restaurada fa 17 anys amb terres adobades amb fangs de depuradora, i s’ha interpretat el seu paper en el context del segrest de carboni en el sòl. La metodologia aplicada es basa en la d’humitejament ràpid dels agregats del sòl per immersió en aigua (Le Bissonnais, 1996), que simula l’estabilitat d'un sòl sec que es veu sotmès a processos tals com la inundació local o saturació ràpida. També s’ha determinat la quantitat de carboni oxidable present en els agregats del sòl amb el mètode de Nelson i Sommers (1982). Els resultats han mostrat que l’adobat amb fangs de depuradora contribueix a augmentar el contingut de carboni orgànic en els agregats del sòl i n’estimula el segrest a mitjà termini (unes 10 tones ha-1 en 17 anys), aportant estabilitat al sòl i protegint físicament el carboni orgànic dins dels agregats de mida major (5-2 mm). A més s’ha constatat que per determinar l’estabilitat del carboni segrestat en el sòl cal conèixer com es distribueix entre les diferents mides d’agregats. Finalment, l’augment del segrest de carboni en el sòl propiciat per l’aplicació dels fangs de depuradora li dóna més capacitat per fixar CO2 atmosfèric.
Resumo:
Diferents aspectes de la reproducció de la cabra de mar Maja brachydactyla s’han estudiat amb l’objectiu d’obtenir coneixements bàsics i aplicats al cultiu en captivitat d’aquesta espècie de gran interès comercial i aqüícola. L’anatomia interna de l’aparell reproductor masculí, el procés d’espermatogènesi, amb especial èmfasi amb la formació de l’acrosoma, i l’estructura i organització l’espermatozoide s’han descrit amb tècniques microscòpiques avançades. El desenvolupament de les gònades durant els primeres fases del desenvolupament post- embrionari (fases larvàries i primer cranc juvenil) han estat descrites mitjançant la quantificació de l’expressió del gen vasa, el qual és expressat específicament per les cèl•lules de la línia germinal. Aquests coneixements són bàsics per a la comprensió del paper dels mascles en la la reproducció i la seva aplicació posterior en condicions de captivitat. La reproducció en captivitat s’ha estudiat amb una sèrie d’experiments amb l’objectiu de determinar la quantitat, pes sec i composició bioquímica proximal de les larves acabades d’eclosionar en condicions de captivitat i l’efecte de les condicions ambientals, com ara el fotoperíode i la salinitat, sobre aquests paràmetres. Aquests experiments demostren què es poden obtenir larves de la cabra de mar en condicions de captivitat què podrien ser utilitzades per a la producció i l’efecte sobre la reproducció del fotoperíode i salinitat.
Resumo:
La gestión de recursos en los procesadores multi-core ha ganado importancia con la evolución de las aplicaciones y arquitecturas. Pero esta gestión es muy compleja. Por ejemplo, una misma aplicación paralela ejecutada múltiples veces con los mismos datos de entrada, en un único nodo multi-core, puede tener tiempos de ejecución muy variables. Hay múltiples factores hardware y software que afectan al rendimiento. La forma en que los recursos hardware (cómputo y memoria) se asignan a los procesos o threads, posiblemente de varias aplicaciones que compiten entre sí, es fundamental para determinar este rendimiento. La diferencia entre hacer la asignación de recursos sin conocer la verdadera necesidad de la aplicación, frente a asignación con una meta específica es cada vez mayor. La mejor manera de realizar esta asignación és automáticamente, con una mínima intervención del programador. Es importante destacar, que la forma en que la aplicación se ejecuta en una arquitectura no necesariamente es la más adecuada, y esta situación puede mejorarse a través de la gestión adecuada de los recursos disponibles. Una apropiada gestión de recursos puede ofrecer ventajas tanto al desarrollador de las aplicaciones, como al entorno informático donde ésta se ejecuta, permitiendo un mayor número de aplicaciones en ejecución con la misma cantidad de recursos. Así mismo, esta gestión de recursos no requeriría introducir cambios a la aplicación, o a su estrategia operativa. A fin de proponer políticas para la gestión de los recursos, se analizó el comportamiento de aplicaciones intensivas de cómputo e intensivas de memoria. Este análisis se llevó a cabo a través del estudio de los parámetros de ubicación entre los cores, la necesidad de usar la memoria compartida, el tamaño de la carga de entrada, la distribución de los datos dentro del procesador y la granularidad de trabajo. Nuestro objetivo es identificar cómo estos parámetros influyen en la eficiencia de la ejecución, identificar cuellos de botella y proponer posibles mejoras. Otra propuesta es adaptar las estrategias ya utilizadas por el Scheduler con el fin de obtener mejores resultados.
Obtenció de nous anàlegs amb activitat brassinoesteroide mitjançant modelització molecular i síntesi
Resumo:
Els brassinoesteroides són productes naturals que actuen com a potents reguladors del creixement vegetal. Presenten aplicacions prometedores en l’agricultura degut a que, aplicats exògenament, augmenten la qualitat i la quantitat de les collites. Ara bé, el seu ús s’ha vist restringit degut a la seva costosa obtenció. Aquest fet ha motivat la recerca de nous compostos actius més assequibles. En aquest projecte es planteja el disseny i obtenció de nous anàlegs seguint diferents estratègies que impliquen tant l’ús de mètodes de modelització molecular com de síntesi orgànica. La primera d’aquestes estratègies consisteix en buscar compostos actius en bases de dades de compostos comercials a través de processos de Virtual Screening desenvolupats amb mètodes computacionals basats en Camps d’Interacció Molecular. Així, es van establir i interpretar models de Relacions Quantitatives Estructura-Activitat (QSAR) emprant descriptors independents de l’alineament (GRIND) i, amb col•laboració amb la Universitat de Perugia, aquest criteri de cerca es va ampliar amb l’aplicació de descriptors FLAP de nova generació. Una altra estratègia es va basar en intentar substituir l’esquelet esteroide dels brassinoesteroides per una estructura equivalent, fixant com a cadena lateral el grup (R)-hexahidromandelil. S’han aplicat dos criteris: mètodes computacionals basats en models QSAR establerts amb descriptors GRIND i també en la metodologia SHOP (scaffold hopping), i, per altra banda, anàlegs proposats racionalment a partir d’un estudi efectuat sobre disruptors endocrins no esteroïdals. Sobre les estructures trobades s’hi va unir la cadena lateral comercial esmentada per via sintètica, en la qual s’ha hagut de fer un èmfasi especial en grups protectors. En total, 49 estructures es proposen per a ser obtingudes sintèticament. També s’ha treballat en l’obtenció un agonista derivat de l’hipotètic antagonista KM-01. Totes les molècules candidates, ja siguin comercials o obtingudes sintèticament, estant sent avaluades en el test d’inclinació de la làmina d’arròs (RLIT).
Resumo:
The aim of this paper is to discover the origins of utility regulation in Spain, and to analyse, from a microeconomic perspective, its characteristics and the impact of regulation on consumers and utilities. Madrid and the Madrilenian utilities are taken as a case study. The electric industry in the period studied was a natural monopoly2. Each of the three phases of production, generation, transmission and distribution, had natural monopoly characteristics. Therefore, the most efficient form to generate, transmit and distribute electricity was the monopoly because one firm can produce a quantity at a lower cost than the sum of costs incurred by two or more firms. A problem arises because when a firm is the single provider it can charge prices above the marginal cost, at monopoly prices. When a monopolist reduces the quantity produced, price increases, causing the consumer to demand less than the economic efficiency level, incurring a loss of consumer surplus. The loss of the consumer surplus is not completely gained by the monopolist, causing a loss of social surplus, a deadweight loss. The main objective of regulation is going to be to reduce to a minimum the deadweight loss. Regulation is also needed because when the monopolist fixes prices at marginal cost equal marginal revenue there would be an incentive for firms to enter the market creating inefficiency. The Madrilenian industry has been chosen because of the availability of statistical information on costs and production. The complex industry structure and the atomised demand add interest to the analysis. This study will also provide some light on the tariff regulation of the period which has been poorly studied and will complement the literature on the US electric utilities regulation where a different type of regulation was implemented.
Resumo:
During the recent period of economic crisis, many countries have introduced scrappage schemes to boost the sale and production of vehicles, particularly of vehicles designed to pollute less. In this paper, we analyze the impact of a particular scheme in Spain (Plan2000E) on vehicle prices and sales figures as well as on the reduction of polluting emissions from vehicles on the road. We considered the introduction of this scheme an exogenous policy change and because we could distinguish a control group (non-subsidized vehicles) and a treatment group (subsidized vehicles), before and after the introduction of the Plan, we were able to carry out our analysis as a quasi-natural experiment. Our study reveals that manufacturers increased vehicle prices by the same amount they were granted through the Plan (1,000 â¬). In terms of sales, econometric estimations revealed an increase of almost 5% as a result of the implementation of the Plan. With regard to environmental efficiency, we compared the costs (inverted quantity of money) and the benefits of the program (reductions in polluting emissions and additional fiscal revenues) and found that the Plan would only be beneficial if it boosted demand by at least 30%.
Resumo:
El objetivo principal de este proyecto es la caracterización de la microcuenca la Jabonera (Estelí, Nicaragua) enfatizando el agua como factor clave que conecta todos los elementos que interaccionan en la microcuenca y que, además delimita el área de estudio. El trabajo de campo ha consistido básicamente en la georeferenciación de los puntos de interés, la realización de encuestas a la población y la evaluación de las fuentes de agua y del agua del río mediante análisis fisicoquímicos. En el procesamiento de la información se ha elaborado cartografía temática mediante la herramienta SIG que ha servido de soporte para la interpretación de los resultados. Las características morfométricas y biofísicas favorecen que el agua precipitada se pierda rápidamente por escorrentía superficial con una tendencia moderada a crecidas e inundaciones. El agua infiltrada circula rápidamente por fracturas del material geológico con tiempos de tránsito cortos, y además, el área de recarga de los nacientes es local por lo que las fuentes son especialmente vulnerables a períodos de sequía y a la contaminación en su entorno cercano. El estudio de usos del suelo junto con la realización de análisis del agua ha permitido determinar que los agroquímicos son la principal fuente potencial de contaminación del agua en la microcuenca. Los resultados obtenidos muestran la necesidad de llevar a cabo una gestión integrada del territorio que garantice un desarrollo socioambiental sostenible.
Resumo:
The bathyal faunal communities of the NW Mediterranean slopes have been studied consistently in the last two decades, with a special focus on population structure, trophic dynamics and benthopelagic coupling of commercial deep-sea decapod crustaceans and fishes (reviewed in Sardà et al. 2004) and associated species (Cartes and Sardà, 1993; Company and Sardà, 1997, 2000; Cartes et al., 2001; Company et al., 2001, 2003, 2004). One of the major topographic features in the North-western Mediterranean slope is the presence of submarine canyons. Canyons play a major role in funnelling energy and organic matter from the shelf to bathyal and abyssal depths (Puig et al., 2000), but the implications of this enhanced organic supply in the deep-sea benthic communities is still mostly unknown. Trophic supply can follow two major pathways – vertical deposition in the water column (Billett et al., 1983; Baldwin et al., 1998; Lampitt et al., 2001) or down-slope advection on the margins (Puig et al., 2001; Bethoux et al., 2002; Canals et al., 2006) – and can be a limiting factor in the deep-sea, being especially important in the oligotrophic Mediterranean Sea (Sardà et al., 2004). Differences in the quantity, quality and timing of organic matter input to the deep seafloor have been used to explain patterns of biomass and abundance in benthic communities (Levin et al., 1994; Gooday & Turley, 1990; Billett et al., 2001; Galéron et al., 2001; Puig et al., 2001; Gage, 2003) as well as other biological process and in particular the existence of seasonal reproduction (Tyler et al., 1994; Company et al., 2004 (MEPS). Reproduction is a highly energetic process tightly linked to food availability and quality.
Resumo:
Report for the scientific sojourn at the UC Berkeley, USA, from march until july 2008. This document starts by surveying the literature on economic federalism and relating it to network industries. The insights and some new developments (which focus on the role of interjurisdictional externalities, multiple objectives and investment incentives) are used to analyze regulatory arrangements in telecommunications and energy in the EU and the US. In the long history of vertically integrated monopolies in telecommunications and energy, there was a historical trend to move regulation up in the vertical structure of government, at least form the local level to the state or nation-state level. This move alleviated the pressure on regulators to renege on the commitment not to expropriate sunk investments, although it did not eliminate the practice of taxation by regulation that was the result of multiple interest group action. Although central or federal policy making is more focused and especialized and makes it difficult for more interest groups to organize, it is not clear that under all conditions central powers will not be associated with underinvestment. When technology makes the introduction of competition in some segments possible, the possibilities for organizing the institutional architechture of regulation expand. The central level may focus on structural regulation and the location of behavioral regulation of the remaining monopolists may be resolved in a cooperative way or concentrated at the level where the relevant spillovers are internalized.
Resumo:
This project deals with the generation of profitability and the distribution of its benefits. Inspired by Davis (1947, 1955), we define profitability as the ratio of revenue to cost. Profitability is not as popular a measure of business financial performance as profit, the difference between revenue and cost. Regardless of its popularity, however, profitability is surely a useful financial performance measure. Our primary objective in this project is to identify the factors that generate change in profitability. One set of factors, which we refer to as sources, consists of changes in quantities and prices of outputs and inputs. Individual quantity changes aggregate to the overall impact of quantity change on profitability change, which we call productivity change. Individual price changes aggregate to the overall impact of price change on profitability change, which we call price recovery change. In this framework profitability change consists exclusively of productivity change and price recovery change. A second set of factors, which we refer to as drivers, consists of phenomena such as technical change, change in the efficiency of resource allocation, and the impact of economies of scale. The ability of management to harness these factors drives productivity change, which is one component of profitability change. Thus the term sources refers to quantities and prices of individual outputs and inputs, whose changes influence productivity change or price recovery change, either of which influences profitability change. The term drivers refers to phenomena related to technology and management that influence productivity change (but not price recovery change), and hence profitability change.
Resumo:
Aquest document explica com és aquesta web actual o sintàctica, basada en llenguatge HTML, i perquè no treu més profit de la ingent quantitat d'informació que conté. També explica d'una manera detallada quina és l'alternativa que la comunitat informàtica proposa per tal de superar aquests inconvenients.
Resumo:
In dam inspection tasks, an underwater robot has to grab images while surveying the wall meanwhile maintaining a certain distance and relative orientation. This paper proposes the use of an MSIS (mechanically scanned imaging sonar) for relative positioning of a robot with respect to the wall. An imaging sonar gathers polar image scans from which depth images (range & bearing) are generated. Depth scans are first processed to extract a line corresponding to the wall (with the Hough transform), which is then tracked by means of an EKF (Extended Kalman Filter) using a static motion model and an implicit measurement equation associating the sensed points to the candidate line. The line estimate is referenced to the robot fixed frame and represented in polar coordinates (rho&thetas) which directly corresponds to the actual distance and relative orientation of the robot with respect to the wall. The proposed system has been tested in simulation as well as in water tank conditions
Resumo:
A través de l'anàlisi de dos sèries de diferents llibres de comptabilitat de Barcelona, els procedents de la gestió dels molins reals i els redactats per una institució eclesiàstica, la Pia Almoina, vam començar a estudiar el mercat del blat a Barcelona durant l'edat mitjana. Hem analitzat anteriorment el valor de les mesures a Barcelona i, per poder qualificar el preu real del pa, també hem estudiat els diferents processos industrials per fer pa de blat. Després, hem analitzat el conjunt d'impostos que pesaven sobre la comercialització de cereals. A través de l'estudi de l'evolució dels preus, hem tractat de fer una primera aproximació de la primera etapa de la crisi baixmedieval, concretament entre 1283 i 1345, tenint en compte els contrastos amb els treballs ja coneguts sobre la base de les fonts on la noció de quantitat no va ser considerada. Finalment, hem comparat els nostres resultats amb alguns treballs referents a la Corona d'Aragó i el món mediterrani, a fi d'obtenir una idea més precisa de la cronologia de les crisis de subsistència
Resumo:
Nowadays, when a user is planning a touristic route is very difficult to find out which are the best places to visit. The user has to choose considering his/her preferences due to the great quantity of information it is possible to find in the web and taking into account it is necessary to do a selection, within small time because there is a limited time to do a trip. In Itiner@ project, we aim to implement Semantic Web technology combined with Geographic Information Systems in order to offer personalized touristic routes around a region based on user preferences and time situation. Using ontologies it is possible to link, structure, share data and obtain the result more suitable for user's preferences and actual situation with less time and more precisely than without ontologies. To achieve these objectives we propose a web page combining a GIS server and a touristic ontology. As a step further, we also study how to extend this technology on mobile devices due to the raising interest and technological progress of these devices and location-based services, which allows the user to have all the route information on the hand when he/she does a touristic trip. We design a little application in order to apply the combination of GIS and Semantic Web in a mobile device.