Innovación, frontera tecnológica y capacidad absortiva: un estudio a nivel de países

La principal aportación de este trabajo es poner de manifiesto que la capacidad absortiva de las economías cambia en función de si el país es el líder o es un seguidor. Aunque tampoco olvidamos otras variables como son la I+D interna, la I+D externa, el desarrollo del sistema financiero y las instituciones. Para ello, primero se prueba la presencia de una raíz unitaria y después se asegura una relación de cointegración entre las variables implicadas en el modelo para poder sacar conclusiones a largo plazo. Y por último, para estimar el modelo, se utilizará una técnica econométrica que combina el tratamiento tradicional de los datos de panel con las técnicas de cointegración: los Dynamics Ordinary Least Squares (DOLS). Esta técnica soluciona las limitaciones de los OLS, ya que su distribución no suele ser estándar por la presencia de un sesgo de muestras finitas (causado bien por la endogeneidad de las variables explicativas bien por la correlación serial de la perturbación). Utilizando un panel de datos que comprende 8 países de la OECD entre 1973-2004 y para el Business Sector, se encuentran diversos resultados, entre los que destacamos que la I+D interna, la I+D externa, la frontera tecnológica, la capacidad absortiva y el desarrollo de las instituciones tienen un impacto positivo sobre el nivel de la PTF. En cambio, el desarrollo del sistema financiero tiene un impacto negativo. Palabras claves: fuentes de la I+D, frontera tecnológica, capacidad absortiva, raíces unitarias, cointegración, DOLS.

On codes, matroids, and secure multiparty computation from linear secret-sharing schemes

Error-correcting codes and matroids have been widely used in the study of ordinary secret sharing schemes. In this paper, the connections between codes, matroids, and a special class of secret sharing schemes, namely, multiplicative linear secret sharing schemes (LSSSs), are studied. Such schemes are known to enable multiparty computation protocols secure against general (nonthreshold) adversaries.Two open problems related to the complexity of multiplicative LSSSs are considered in this paper. The first one deals with strongly multiplicative LSSSs. As opposed to the case of multiplicative LSSSs, it is not known whether there is an efficient method to transform an LSSS into a strongly multiplicative LSSS for the same access structure with a polynomial increase of the complexity. A property of strongly multiplicative LSSSs that could be useful in solving this problem is proved. Namely, using a suitable generalization of the well-known Berlekamp–Welch decoder, it is shown that all strongly multiplicative LSSSs enable efficient reconstruction of a shared secret in the presence of malicious faults. The second one is to characterize the access structures of ideal multiplicative LSSSs. Specifically, the considered open problem is to determine whether all self-dual vector space access structures are in this situation. By the aforementioned connection, this in fact constitutes an open problem about matroid theory, since it can be restated in terms of representability of identically self-dual matroids by self-dual codes. A new concept is introduced, the flat-partition, that provides a useful classification of identically self-dual matroids. Uniform identically self-dual matroids, which are known to be representable by self-dual codes, form one of the classes. It is proved that this property also holds for the family of matroids that, in a natural way, is the next class in the above classification: the identically self-dual bipartite matroids.

Supermarket key attributes and location decisions: A comparative study between British and Spanish consumers

The Maximum Capture problem (MAXCAP) is a decision model that addresses the issue of location in a competitive environment. This paper presents a new approach to determine which store s attributes (other than distance) should be included in the newMarket Capture Models and how they ought to be reflected using the Multiplicative Competitive Interaction model. The methodology involves the design and development of a survey; and the application of factor analysis and ordinary least squares. Themethodology has been applied to the supermarket sector in two different scenarios: Milton Keynes (Great Britain) and Barcelona (Spain).

Bootstrapping pairs in Distance-Based Regression

La regressió basada en distàncies és un mètode de predicció que consisteix en dos passos: a partir de les distàncies entre observacions obtenim les variables latents, les quals passen a ser els regressors en un model lineal de mínims quadrats ordinaris. Les distàncies les calculem a partir dels predictors originals fent us d'una funció de dissimilaritats adequada. Donat que, en general, els regressors estan relacionats de manera no lineal amb la resposta, la seva selecció amb el test F usual no és possible. En aquest treball proposem una solució a aquest problema de selecció de predictors definint tests estadístics generalitzats i adaptant un mètode de bootstrap no paramètric per a l'estimació dels p-valors. Incluim un exemple numèric amb dades de l'assegurança d'automòbils.

Estudi de l'estat de Salut autopercebut: Modelització de l'índex d'utilitat EQ-5D mitjançant un model tobit

Objective: Health status measures usually have an asymmetric distribution and present a highpercentage of respondents with the best possible score (ceiling effect), specially when they areassessed in the overall population. Different methods to model this type of variables have beenproposed that take into account the ceiling effect: the tobit models, the Censored Least AbsoluteDeviations (CLAD) models or the two-part models, among others. The objective of this workwas to describe the tobit model, and compare it with the Ordinary Least Squares (OLS) model,that ignores the ceiling effect.Methods: Two different data sets have been used in order to compare both models: a) real datacomming from the European Study of Mental Disorders (ESEMeD), in order to model theEQ5D index, one of the measures of utilities most commonly used for the evaluation of healthstatus; and b) data obtained from simulation. Cross-validation was used to compare thepredicted values of the tobit model and the OLS models. The following estimators werecompared: the percentage of absolute error (R1), the percentage of squared error (R2), the MeanSquared Error (MSE) and the Mean Absolute Prediction Error (MAPE). Different datasets werecreated for different values of the error variance and different percentages of individuals withceiling effect. The estimations of the coefficients, the percentage of explained variance and theplots of residuals versus predicted values obtained under each model were compared.Results: With regard to the results of the ESEMeD study, the predicted values obtained with theOLS model and those obtained with the tobit models were very similar. The regressioncoefficients of the linear model were consistently smaller than those from the tobit model. In thesimulation study, we observed that when the error variance was small (s=1), the tobit modelpresented unbiased estimations of the coefficients and accurate predicted values, specially whenthe percentage of individuals wiht the highest possible score was small. However, when theerrror variance was greater (s=10 or s=20), the percentage of explained variance for the tobitmodel and the predicted values were more similar to those obtained with an OLS model.Conclusions: The proportion of variability accounted for the models and the percentage ofindividuals with the highest possible score have an important effect in the performance of thetobit model in comparison with the linear model.

Multipole surface-plasmon modes on simple metals

The average multipole surface-plasmon energy for simple metals, as well as that of ordinary surface and bulk plasmons, is obtained using energy-weighted moments of the electronic response to sufficiently general external perturbations. A local approximation of exchange and correlation effects is used within a jellium model. Band-structure effects are incorporated through an effective electronic mass. Taking advantage of the transparency of the method, we analyze under what circumstances such modes might be observable. It is shown that due to an interplay between Coulomb and kinetic energies, the multipole modes become unobservable for increasing values of the transferred momentum (q) parallel to the surface. The value of q at which the multipole mode becomes unobservable is much smaller than the cutoff value for Landau damping. The effect of the electronic surface diffuseness is also analyzed. We compare our results with previous density-functional calculations and with recent experimental data for Na, K, and Cs.

Diffusion on a solid surface: anomalous is normal

We present a numerical study of classical particles diffusing on a solid surface. The particles motion is modeled by an underdamped Langevin equation with ordinary thermal noise. The particle-surface interaction is described by a periodic or a random two-dimensional potential. The model leads to a rich variety of different transport regimes, some of which correspond to anomalous diffusion such as has recently been observed in experiments and Monte Carlo simulations. We show that this anomalous behavior is controlled by the friction coefficient and stress that it emerges naturally in a system described by ordinary canonical Maxwell-Boltzmann statistics.

From subdiffusion to superdiffusion of particles on solid surfaces

We present a numerical and partially analytical study of classical particles obeying a Langevin equation that describes diffusion on a surface modeled by a two-dimensional potential. The potential may be either periodic or random. Depending on the potential and the damping, we observe superdiffusion, large-step diffusion, diffusion, and subdiffusion. Superdiffusive behavior is associated with low damping and is in most cases transient, albeit often long. Subdiffusive behavior is associated with highly damped particles in random potentials. In some cases subdiffusive behavior persists over our entire simulation and may be characterized as metastable. In any case, we stress that this rich variety of behaviors emerges naturally from an ordinary Langevin equation for a system described by ordinary canonical Maxwell-Boltzmann statistics.

Pressure-dependent scaling scenarios in experiments of spontaneous imbibition

The scaling properties of the rough liquid-air interface formed in the spontaneous imbibition of a viscous liquid by a model porous medium are found to be very sensitive to the magnitude of the pressure difference applied at the liquid inlet. Interface fluctuations change from obeying intrinsic anomalous scaling at large negative pressure differences, to being super-rough with the same dynamic exponent z¿3 at less negative pressure differences, to finally obeying ordinary Family-Vicsek scaling with z¿2 at large positive pressure differences. This rich scenario reflects the relative importance on different length scales of capillary and permeability disorder, and the role of surface tension and viscous pressure in damping interface fluctuations.

Slow Dynamics of Ising Models with Energy Barriers

Using Monte Carlo simulations we study the dynamics of three-dimensional Ising models with nearest-, next-nearest-, and four-spin (plaquette) interactions. During coarsening, such models develop growing energy barriers, which leads to very slow dynamics at low temperature. As already reported, the model with only the plaquette interaction exhibits some of the features characteristic of ordinary glasses: strong metastability of the supercooled liquid, a weak increase of the characteristic length under cooling, stretched-exponential relaxation, and aging. The addition of two-spin interactions, in general, destroys such behavior: the liquid phase loses metastability and the slow-dynamics regime terminates well below the melting transition, which is presumably related with a certain corner-rounding transition. However, for a particular choice of interaction constants, when the ground state is strongly degenerate, our simulations suggest that the slow-dynamics regime extends up to the melting transition. The analysis of these models leads us to the conjecture that in the four-spin Ising model domain walls lose their tension at the glassy transition and that they are basically tensionless in the glassy phase.

Dynamical Systems approach to Saffman-Taylor fingering. A Dynamical Solvability Scenario

A dynamical systems approach to competition of Saffman-Taylor fingers in a Hele-Shaw channel is developed. This is based on global analysis of the phase space flow of the low-dimensional ordinary-differential-equation sets associated with the classes of exact solutions of the problem without surface tension. Some simple examples are studied in detail. A general proof of the existence of finite-time singularities for broad classes of solutions is given. Solutions leading to finite-time interface pinchoff are also identified. The existence of a continuum of multifinger fixed points and its dynamical implications are discussed. We conclude that exact zero-surface tension solutions taken in a global sense as families of trajectories in phase space are unphysical because the multifinger fixed points are nonhyperbolic, and an unfolding does not exist within the same class of solutions. Hyperbolicity (saddle-point structure) of the multifinger fixed points is argued to be essential to the physically correct qualitative description of finger competition. The restoring of hyperbolicity by surface tension is proposed as the key point to formulate a generic dynamical solvability scenario for interfacial pattern selection.

Poincaré is a subgroup of Galilei in one space dimension more

Through an imaginary change of coordinates, the ordinary Poincar algebra is shown to be a subalgebra of the Galilei one in four space dimensions. Through a subsequent contraction the remaining Lie generators are eliminated in a natural way. An application of these results to connect Galilean and relativistic field equations is discussed.

Hamiltonian formalism for path-dependent Lagrangians

A presymplectic structure for path-dependent Lagrangian systems is set up such that, when applied to ordinary Lagrangians, it yields the familiar Legendre transformation. It is then applied to derive a Hamiltonian formalism and the conserved quantities for those predictive invariant systems whose solutions also satisfy a Fokker-type action principle.

Particle creation due to cosmological contraction of extra dimensions

Particle production in a cosmological spacetime with extra dimensions is discussed. A five-dimensional cosmological model with a three-dimensional space expanding isotropically like in a radiative Friedmann-Robertson-Walker model and an internal space contracting to a constant small size is considered. The parameters of the model are adjusted so that time variations in internal space are compatible with present limits on time variations of the fundamental constants. By requiring that the energy density of the particles produced be less than the critical density at the radiation era we set restrictions on two more parameters: namely, the initial time of application of the semiclassical approach and the relative sizes between the internal space and the horizon of the ordinary Universe at this time. Whereas the production of massless particles allows a large range of variation to these parameters, the production of massive particles sets severe constraints on them, since, if they are overproduced, their energy density might very soon dominate the Universe and make cosmological dimensional reduction by extradimensional contraction unlikely.