How does basis set superposition error change the potential surfaces for hydrogen-bonded dimers?

We describe a simple method to automate the geometric optimization of molecular orbital calculations of supermolecules on potential surfaces that are corrected for basis set superposition error using the counterpoise (CP) method. This method is applied to the H-bonding complexes HF/HCN, HF/H2O, and HCCH/H2O using the 6-31G(d,p) and D95 + + (d,p) basis sets at both the Hartree-Fock and second-order Møller-Plesset levels. We report the interaction energies, geometries, and vibrational frequencies of these complexes on the CP-optimized surfaces; and compare them with similar values calculated using traditional methods, including the (more traditional) single point CP correction. Upon optimization on the CP-corrected surface, the interaction energies become more negative (before vibrational corrections) and the H-bonding stretching vibrations decrease in all cases. The extent of the effects vary from extremely small to quite large depending on the complex and the calculational method. The relative magnitudes of the vibrational corrections cannot be predicted from the H-bond stretching frequencies alone

Ab initio benchmark study for the oxidative addition of CH4 to Pd: importance of basis-set flexibility and polarization

To obtain a state-of-the-art benchmark potential energy surface (PES) for the archetypal oxidative addition of the methane C-H bond to the palladium atom, we have explored this PES using a hierarchical series of ab initio methods (Hartree-Fock, second-order Møller-Plesset perturbation theory, fourth-order Møller-Plesset perturbation theory with single, double and quadruple excitations, coupled cluster theory with single and double excitations (CCSD), and with triple excitations treated perturbatively [CCSD(T)]) and hybrid density functional theory using the B3LYP functional, in combination with a hierarchical series of ten Gaussian-type basis sets, up to g polarization. Relativistic effects are taken into account either through a relativistic effective core potential for palladium or through a full four-component all-electron approach. Counterpoise corrected relative energies of stationary points are converged to within 0.1-0.2 kcal/mol as a function of the basis-set size. Our best estimate of kinetic and thermodynamic parameters is -8.1 (-8.3) kcal/mol for the formation of the reactant complex, 5.8 (3.1) kcal/mol for the activation energy relative to the separate reactants, and 0.8 (-1.2) kcal/mol for the reaction energy (zero-point vibrational energy-corrected values in parentheses). This agrees well with available experimental data. Our work highlights the importance of sufficient higher angular momentum polarization functions, f and g, for correctly describing metal-d-electron correlation and, thus, for obtaining reliable relative energies. We show that standard basis sets, such as LANL2DZ+ 1f for palladium, are not sufficiently polarized for this purpose and lead to erroneous CCSD(T) results. B3LYP is associated with smaller basis set superposition errors and shows faster convergence with basis-set size but yields relative energies (in particular, a reaction barrier) that are ca. 3.5 kcal/mol higher than the corresponding CCSD(T) values

Carleson Measures and Logvinenko-Sereda sets on compact manifolds

Given a compact Riemannian manifold $M$ of dimension $m \geq 2$, we study the space of functions of $L^2(M)$generated by eigenfunctions ofeigenvalues less than $L \geq 1$ associated to the Laplace-Beltrami operator on $M$. On these spaces we give a characterization of the Carleson measures and the Logvinenko-Sereda sets.

The statistical accuracy of surveys on business and economic perspectives: a case study

In this paper, we develop a new decision making model and apply it in political Surveys of economic climate collect opinions of managers about the short-term future evolution of their business. Interviews are carried out on a regular basis and responses measure optimistic, neutral or pessimistic views about the economic perspectives. We propose a method to evaluate the sampling error of the average opinion derived from a particular type of survey data. Our variance estimate is useful to interpret historical trends and to decide whether changes in the index from one period to another are due to a structural change or whether ups and downs can be attributed to sampling randomness. An illustration using real data from a survey of business managers opinions is discussed.

Aprender verbos semánticamente similares: materiales didácticos electrónicos para estudiantes de ELE

El trabajo consiste en un análisis y la evaluación de materiales electrónicos existentes sobre parejas de verbos con significados parecidos, además de la ampliación de estos materiales y la creación de un blog para poner-los a disposición de los estudiantes de ELE

Calculation of the variance in surveys of the economic climate

Public opinion surveys have become progressively incorporated into systems of official statistics. Surveys of the economic climate are usually qualitative because they collect opinions of businesspeople and/or experts about the long-term indicators described by a number of variables. In such cases the responses are expressed in ordinal numbers, that is, the respondents verbally report, for example, whether during a given trimester the sales or the new orders have increased, decreased or remained the same as in the previous trimester. These data allow to calculate the percent of respondents in the total population (results are extrapolated), who select every one of the three options. Data are often presented in the form of an index calculated as the difference between the percent of those who claim that a given variable has improved in value and of those who claim that it has deteriorated.

SQualTrack: A Tool for Robust Fault Detection

One of the techniques used to detect faults in dynamic systems is analytical redundancy. An important difficulty in applying this technique to real systems is dealing with the uncertainties associated with the system itself and with the measurements. In this paper, this uncertainty is taken into account by the use of intervals for the parameters of the model and for the measurements. The method that is proposed in this paper checks the consistency between the system's behavior, obtained from the measurements, and the model's behavior; if they are inconsistent, then there is a fault. The problem of detecting faults is stated as a quantified real constraint satisfaction problem, which can be solved using the modal interval analysis (MIA). MIA is used because it provides powerful tools to extend the calculations over real functions to intervals. To improve the results of the detection of the faults, the simultaneous use of several sliding time windows is proposed. The result of implementing this method is semiqualitative tracking (SQualTrack), a fault-detection tool that is robust in the sense that it does not generate false alarms, i.e., if there are false alarms, they indicate either that the interval model does not represent the system adequately or that the interval measurements do not represent the true values of the variables adequately. SQualTrack is currently being used to detect faults in real processes. Some of these applications using real data have been developed within the European project advanced decision support system for chemical/petrochemical manufacturing processes and are also described in this paper

Bias and standard error for social reciprocity measurements

The directional consistency and skew-symmetry statistics have been proposed as global measurements of social reciprocity. Although both measures can be useful for quantifying social reciprocity, researchers need to know whether these estimators are biased in order to assess descriptive results properly. That is, if estimators are biased, researchers should compare actual values with expected values under the specified null hypothesis. Furthermore, standard errors are needed to enable suitable assessment of discrepancies between actual and expected values. This paper aims to derive some exact and approximate expressions in order to obtain bias and standard error values for both estimators for round-robin designs, although the results can also be extended to other reciprocal designs.

Parametric analysis of different compact tension specimens for fracture toughness characterisation in woven composite materials

Estudi elaborat a partir d’una estada a l’ Imperial College London, entre juliol i novembre de 2006. En aquest treball s’ha investigat la geometria més apropiada per a la caracterització de la tenacitat a fractura intralaminar de materials compòsits laminats amb teixit. L’objectiu és assegurar la propagació de l’esquerda sense que la proveta falli abans per cap altre mecanisme de dany per tal de permetre la caracterització experimental de la tenacitat a fractura intralaminar de materials compòsits laminats amb teixit. Amb aquesta fi, s’ha dut a terme l’anàlisi paramètrica de diferents tipus de provetes mitjançant el mètode dels elements finits (FE) combinat amb la virtual crack closure technique (VCCT). Les geometries de les provetes analitzades corresponen a la proveta de l’assaig compact tension (CT) i diferents variacions com la extended compact tension (ECT), la proveta widened compact tension (WCT), tapered compact tension (TCT) i doubly-tapered compact tension (2TCT). Com a resultat d’aquestes anàlisis s’han derivat diferents conclusions per obtenir la geometria de proveta més apropiada per a la caracterització de la tenacitat a fractura intralaminar de materials compòsits laminats amb teixit. A més, també s’han dut a terme una sèrie d’assaigs experimentals per tal de validar els resultats de les anàlisis paramètriques. La concordança trobada entre els resultats numèrics i experimentals és bona tot i la presència d’efectes no previstos durant els assaigs experimentals.

Analysis of thermal properties of phase change materials (PCM) using differential scanning calorimeter (DSC)

Commercially available PCM RT 20, RT 27, SP 22, A17 and SP 25 A8. Were analyzed using dynamic and step method of heat flux DSC. The results of the dinamic and step method were compared with commercial valures. It was found that RT 20 & RT 27 showed good conforming of results with commercial values while SP 22 A17 & SP 25 A8 did not show conformity.

Un análisis optimista de la educación matemática en la formación de maestros de educación infantil = An optimistic analysis of mathematics education in training pre-school teachers

This article offers a panorama of mathematics training for future teachers at pre-school level in Spain. With this goal in mind, this article is structured infour sections: where we come from, where we are, where we’re going and where we want to go. It offers, in short, a brief analysis that shows the efforts made to ensure there is sufficient academic and scientific rigour in teachers’ studies at pre-school in general and students’ mathematics education in particular. Together with a description of the progress made in recent years, it also raises some questions for all those involved in training future teachers for this educational stage

Una Aproximació a la construcció significativa del coneixement matemàtic a l'ESO

This study displays and analyzes the contents of the Mathematics subject in ESO’s second cycle from a constructivist perspective. This analysis has been carried out by contrasting two groups of participants (control group and experimental group). These groups were formed by a sample of 240 students between the ages of 14 and 16 from four different educational centres of the Osona area. Research – Action methodology has been employed, combining quantitative techniques (statistical study with the SPSS package) with qualitative analysis (transcriptions of interviews and discussion group). This study has been carried out after years of classroom observation, reflection and action. The theoretical framework employed is a cognitive one, based on Ausubel’s Significative Learning Theory. Quantitative analysis shows how the researcher’s design improves, on the one hand, the students’ academic motivation and, on the other hand, their comprehensive memory, enabling them to achieve a more significant learning of the subjects’ contents. Furthermore, our analysis shows that the proposed method is more comprehensive than those employed by teachers collaborating with control groups. The main aim of the qualitative analysis is that of identifying the elements which configure the programme and contribute to an improvement of the aspects mentioned above. The key elements here are: co-operation as the basis of group dynamics; the employment, in some cases, of easily handled materials; the type of interaction between teacher and students, where, through open discussion, students are lead by teaching staff towards the course objectives; induction, that is, deducing formulae by initially using examples which are close to the students’ knowledge and experience or taken from everyday life (what we could call “down-top” mathematics). We should add here that the qualitative analysis does not only corroborate the results obtained by quantitative techniques, but also displays an increase of motivation in teaching staff. Teachers did show a positive attitude and welcomed the use and development of these materials in the next academic year. Finally, we discuss possible directions for further research.

Toward partial reorientation of land management for sustainability in view of material circulation: biophysical and historical analysis

This paper explores two major issues, from biophysical and historical viewpoints. We examine land management, which we define as the long-term fertility maintenance of land in relation to agriculture, fishery and forestry. We also explore humans’ positive role as agents aiming to reinforce harmonious materials circulation within the land. Liebig’s view on nature, agriculture and land, emphasizes the maintenance of long-term land fertility based on his agronomical thought that the circulation of matter in agricultural fields must be maintained with manure as much as possible. The thoughts of several classical economists, on nature, agriculture and land are reassessed from Liebig’s view point. Then, the land management problem is discussed at a much more fundamental level, to understand the necessary conditions for life in relation to land management. This point is analyzed in terms of two mechanisms: entropy disposal on the earth, and material circulation against gravitational field. Finally from the historical example of the metropolis of Edo, it is shown that there is yet another necessary condition for the sustainable management of land based on the creation of harmonious material cycles among cities, farm land, forests and surrounding sea areas in which humans play a vital role as agent.

ATiPAP : desenvolupament de materials docents amb suport multimedia pels continguts d'Atenció, Percepció Auditiva i de la Parla adaptats als crédits ECTS i a l'EEES dins l'ensenyament de Psicologia

El projecte ha permès finançar el suport tècnic necessari per a poder desenvolupar materials informatitzats corresponents a activitats teòrico-pràctiques de l’assignatura troncal de la llicenciatura de Psicologia (actualment també en el Grau) “Percepció i Atenció”. Els materials desenvolupats corresponen a diferents punts del programa de l’assignatura i són els següents: demostració de la tècnica d’ombrejat per l’anàlisi de l’atenció focalitzada; parpelleig atencional en sèries de presentacions ràpides d’informació visual (RSVP); canvis encoberts de l’atenció i el mecanisme d’inhibició de retorn; efectes dels filtrats sobre la percepció de la parla i la música; il·lusions auditives i els principis d’organització de la informació sonora complexa; la percepció categòrica dels sons de la parla i la naturalesa continua del processament lèxic (paradigma d’obertura successiva o gating). Per totes aquelles activitats amb continguts de llenguatge, s’han desenvolupat dues versions equivalents, catalana i castellana, per permetre que els estudiants fessin la pràctica en la seva llengua dominant. A la primera fase del projecte, al llarg del curs 2006-07, es van preparar els materials i la programació de les diferents pràctiques i es van poder identificar alguns problemes que es van solucionar posteriorment. En el curs 2007-08 totes les activitats de pràctiques ja es van fer accessibles als estudiants (Plataforma Moodle, Campus Virtual) i la valoració sobre el seu funcionament, feta pels estudiants mitjançant qüestionaris, va ser satisfactòria en més d’un 95% dels casos (els únics problemes detectats estaven relacionats amb les característiques dels ordinadors del usuaris i del navegador utilitzat per accedir als materials). La valoració de les activitats per part dels estudiants va ser globalment positiva i, en el seu ús continuat al llarg dels cursos 2008-09 i 2009-10, s’ha observat una participació creixent (accés voluntari a les activitats) i un aprofitament millor de la informació presentada, que es tradueix en millores en les puntuacions obtingudes en les avaluacions de l'assignatura.

Producció de material docent per a ciència de materials mitjançant microscòpia electrònica de rastreig i làser confocal

Aquest projecte s'ha realitzat al Servei de Microscòpia de la Universitat Autònoma de Barcelona, i ha tingut una durada de dos anys (2006-2008). La finalitat d’aquest projecte ha estat l’elaboració de material didàctic basat en la captació d’imatges i l’edició de recursos pedagògics de suport digital aplicats a la ciència de materials. Es pretén millorar així la qualitat docent de les pràctiques de diverses assignatures dels ensenyaments de Física i d’Enginyeria de Materials utilitzant tècniques d’anàlisi actuals com són la Microscòpia Electrònica de Rastreig (MER) i la Microscòpia Optica (MO). Amb aquest projecte es vol fomentar també el treball interdisciplinari en equip entre professionals (docents i tècnics superiors de recerca) i acostar la teoria de les assignatures a la realització pràctica, facilitant el suport digital necessari per aconseguir un màxim aprofitament a les aules. Les imatges de MER i MO ajudaran als alumnes a familiaritzar-se amb el món de la recerca i la indústria.