Forecasting coal resources and reserves in heterogeneous coal zones using 3D facies models (As Pontes Basin, NW Spain)

Forecasting coal resources and reserves is critical for coal mine development. Thickness maps are commonly used for assessing coal resources and reserves; however they are limited for capturing coal splitting effects in thick and heterogeneous coal zones. As an alternative, three-dimensional geostatistical methods are used to populate facies distributionwithin a densely drilled heterogeneous coal zone in the As Pontes Basin (NWSpain). Coal distribution in this zone is mainly characterized by coal-dominated areas in the central parts of the basin interfingering with terrigenous-dominated alluvial fan zones at the margins. The three-dimensional models obtained are applied to forecast coal resources and reserves. Predictions using subsets of the entire dataset are also generated to understand the performance of methods under limited data constraints. Three-dimensional facies interpolation methods tend to overestimate coal resources and reserves due to interpolation smoothing. Facies simulation methods yield similar resource predictions than conventional thickness map approximations. Reserves predicted by facies simulation methods are mainly influenced by: a) the specific coal proportion threshold used to determine if a block can be recovered or not, and b) the capability of the modelling strategy to reproduce areal trends in coal proportions and splitting between coal-dominated and terrigenousdominated areas of the basin. Reserves predictions differ between the simulation methods, even with dense conditioning datasets. Simulation methods can be ranked according to the correlation of their outputs with predictions from the directly interpolated coal proportion maps: a) with low-density datasets sequential indicator simulation with trends yields the best correlation, b) with high-density datasets sequential indicator simulation with post-processing yields the best correlation, because the areal trends are provided implicitly by the dense conditioning data.

Caracterización de rodales irregulares de Abies alba Mill. capitalizados en existencias del Valle de Arán (Pirineos, España) y de las cortas de entresaca practicadas

Se describe, en una zona de la vertiente norte de los Pirineos españoles, la estructura dasocrática de rodales irregulares de abeto excesivamente capitalizados en existencias volumétricas, así como la naturaleza de las intervenciones de entresaca que se les aplican al objeto de contrarrestar la tendencia hacia una indeseable uniformidad de la masa. La situación inicial revela una elevada espesura, con importantes excedentes de individuos pertenecientes a las clases diamétricas de madera gruesa, y que conduce a formas selvícolas tipológicas en avanzado proceso de regularización. Empero, la estabilidad mecánica de los pies se manifiesta alejada de sus umbrales críticos en todos los estratos, y la capacidad de regeneración del sistema resulta aceptable. El tratamiento de entresaca realizado, cuya severidad se centró fundamentalmente sobre los pies de diámetro superior a 30 cm, mantiene todavía una situación de espesura excesiva que impide la adscripción de los rodales a estructuras equilibradas, pero ha permitido la liberación de la competencia vertical de los pies en edad de latizal.

From room for books to room for users: an old infantry barrack as an answer to the lack of space

At the beginning of the 21st century, some Catalan university libraries detected a need stemming from the lack of space and the reconversion of physical libraries within the new European educational panorama. With the same cooperative spirit that characterized previous CBUC (Consortium of Academic Libraries of Catalonia) programs and services, the Consortium set in motion a project to address this need. An initial study was commissioned in 2002, and in 2003 a suitable building (old infantry barracks) was found in Lleida. The official opening took place in 2008. GEPA (Guaranteed Space for the Preservation of Access) facility is a cooperative repository, whose objectives are to store and preserve low use documents, ensuring their future access when needed, to convert room for books into room for library users, and doing it saving both space and money. The paper presents a brief historical introduction about the physical management of collections in libraries, and a short overview about high density library repositories all over the world, as an answer to the pressing problem of lack of spaces. The main goals of the communication are to comment the architectural project and its librarian issues, and to show how the GEPA facility allowed to change the spaces in university libraries in Catalonia. On the one hand, the paper deals with the selection of an old building to be renovated, the determination of the librarian needs, the compact shelving system chosen to store the documents in the building, the relation between physical space and information management, and the logistics involved in the load of low use documents from the libraries into the facility. On the other hand, we will show some examples of physical changes in Catalan libraries after large loads of documents to GEPA.

Studies on grain boundaries in nanocrystalline silicon grown by Hot-Wire CVD

The use of a tantalum wire in hot-wire chemical vapour deposition (HWCVD) has allowed the deposition of dense nanocrystalline silicon at low filament temperatures (1550 °C). A transition in the crystalline preferential orientation from (2 2 0) to (1 1 1) was observed around 1700 °C. Transmission electron microscopy (TEM) images, together with secondary ion mass spectrometry (SIMS) measurements, suggested that no oxidation occurred in materials obtained at low filament temperature due to the high density of the tissue surrounding grain boundaries. A greater concentration of SiH 3 radicals formed at these temperatures seemed to be responsible for the higher density.

Structural factors impacting carrier transport and electroluminescence from Si nanocluster-sensitized Er ions.

We present an analysis of factors influencing carrier transport and electroluminescence (EL) at 1.5 µm from erbium-doped silicon-rich silica (SiOx) layers. The effects of both the active layer thickness and the Si excess content on the electrical excitation of erbium are studied. We demonstrate that when the thickness is decreased from a few hundred to tens of nanometers the conductivity is greatly enhanced. Carrier transport is well described in all cases by a Poole-Frenkel mechanism, while the thickness-dependent current density suggests an evolution of both density and distribution of trapping states induced by Si nanoinclusions. We ascribe this observation to stress-induced effects prevailing in thin films, which inhibit the agglomeration of Si atoms, resulting in a high density of sub-nm Si inclusions that induce traps much shallower than those generated by Si nanoclusters (Si-ncs) formed in thicker films. There is no direct correlation between high conductivity and optimized EL intensity at 1.5 µm. Our results suggest that the main excitation mechanism governing the EL signal is impact excitation, which gradually becomes more efficient as film thickness increases, thanks to the increased segregation of Si-ncs, which in turn allows more efficient injection of hot electrons into the oxide matrix. Optimization of the EL signal is thus found to be a compromise between conductivity and both number and degree of segregation of Si-ncs, all of which are governed by a combination of excess Si content and sample thickness. This material study has strong implications for many electrically driven devices using Si-ncs or Si-excess mediated EL.

Wine, alcohol, polyphenols and cardiovascular disease

Abstract. Excessive alcohol consumption is associated with increased morbidity and mortality as well as with labour and traffic accidents. However, current evidence suggests beneficial effects of moderate drinking on cardiovascular events including coronary heart disease, ischaemic stroke, peripheral arterial disease and congestive heart failure. The underlying mechanisms to explain these protective effects against coronary heart disease include an increase in high-density lipoprotein cholesterol and an increase in insulin sensitivity, and a decrease in platelet aggregation and circulating concentrations of fibrinogen. However, there are discrepancies regarding the specific effects of different types of beverages on the cardiovascular system, and also whether the possible protective effects of alcoholic beverages are due to their alcohol component (ethanol) or non-alcoholic products containing, mainly polyphenols. Recent randomised clinical trials have shown that wine, a polyphenol-rich alcoholic beverage, provides higher antioxidant and anti-inflammatory effects than some spirits such as gin, a polyphenol-free alcoholic beverage. In addition, dealcoholized red wine decreases blood pressure through a nitric oxide mediated mechanism, suggesting a protective effect of polyphenols on vascular function. Other studies performed in women have observed that daily doses of 1520 g of alcohol as red wine are sufficient to elicit protective effects similar to those observed in men who consumed higher doses of wine. In conclusion, moderate consumption of wine exerts a protective effect on biomarkers related to the progression and development of atherosclerosis due to its alcoholic (ethanol) and non-alcoholic (polyphenols) content. Women are more sensitive to the beneficial effects of wine.

Research on the suitability of organosolv semi-chemical triticale fibers as reinforcement for recycled hdpe composites

The main objective of this research was to study the feasibility of incorporating organosolv semi-chemical triticale fibers as the reinforcing element in recycled high density polyethylene (HDPE). In the first step, triticale fibers were characterized in terms of chemical composition and compared with other biomass species (wheat, rye, softwood, and hardwood). Then, organosolv semi-chemical triticale fibers were prepared by the ethanolamine process. These fibers were characterized in terms of its yield, kappa number, fiber length/diameter ratio, fines, and viscosity; the obtained results were compared with those of eucalypt kraft pulp. In the second step, the prepared fibers were examined as a reinforcing element for recycled HDPE composites. Coupled and non-coupled HDPE composites were prepared and tested for tensile properties. Results showed that with the addition of the coupling agent maleated polyethylene (MAPE), the tensile properties of composites were significantly improved, as compared to non-coupled samples and the plain matrix. Furthermore, the influence of MAPE on the interfacial shear strength (IFSS) was studied. The contributions of both fibers and matrix to the composite strength were also studied. This was possible by the use of a numerical iterative method based on the Bowyer-Bader and Kelly-Tyson equations