Grain size analyses in tin-lead glazes based on 2d-sections

A problem in the archaeometric classification of Catalan Renaissance pottery is the fact, thatthe clay supply of the pottery workshops was centrally organized by guilds, and thereforeusually all potters of a single production centre produced chemically similar ceramics.However, analysing the glazes of the ware usually a large number of inclusions in the glaze isfound, which reveal technological differences between single workshops. These inclusionshave been used by the potters in order to opacify the transparent glaze and to achieve a whitebackground for further decoration.In order to distinguish different technological preparation procedures of the single workshops,at a Scanning Electron Microscope the chemical composition of those inclusions as well astheir size in the two-dimensional cut is recorded. Based on the latter, a frequency distributionof the apparent diameters is estimated for each sample and type of inclusion.Following an approach by S.D. Wicksell (1925), it is principally possible to transform thedistributions of the apparent 2D-diameters back to those of the true three-dimensional bodies.The applicability of this approach and its practical problems are examined using differentways of kernel density estimation and Monte-Carlo tests of the methodology. Finally, it istested in how far the obtained frequency distributions can be used to classify the pottery

Gènere i identitats en la construcció d'una comunitat colonial a Empúries (segles VI-V a.C.)

El projecte de recerca ha analitzat la complexitat ètnica, social i de gènere de l’assentament colonial d’Empúries a partir d’un exhaustiu estudi contextual dels materials ceràmics d’ús quotidià provinents de diferents sectors excavats als anys vuitanta a la Neàpolis empuritana (N-7000, N-5000 i N-1000). Aquests sectors datats els segles V i IV a.C., corresponen a un moment en el qual s’està construint una identitat colonial diferenciada en l’espai emporità. La comparació dels aixovars domèstics usats quotidianament pels habitants d’aquest tres sectors situats en punts distants de la Neàpolis mostra que estem davant d’un assentament colonial molt heterogeni, on conflueixen materialitats, tradicions tecnològiques i pràctiques quotidianes iberes, gregues i híbrides. Els estudis de materials confirmen que no va existir una segregació espacial entre poblacions d’origen grec i iber en aquest assentament i suggereixen la cohabitació de gent –tant d’homes com de dones- d’origen grec i iber a les diferents àrees estudiades d’aquest assentament portuari. En el registre material ceràmic de totes les zones estudiades s’observa un predomini dels productes ceràmics de tradició grega (colonials o àtics) en els serveis de taula, però no així en els estris utilitzats a la cuina, que són majoritàriament de tradició ibera. També els materials ceràmics relacionats amb l’emmagatzematge domèstic i amb el transport i el comerç (àmfores) són predominantment ibers. Aquest patró suggereix que els ibers que van cohabitar amb els grecs al port emporità no van assumir en tots els casos posicions subalternes, sinó que tingueren un rol rellevant en la gestió econòmica i comercial d’aquest espai portuari.

Anàlisi del sistema productiu i comercial del vi de la Tarraconensis a partir de la combinació de metodologies

Des del segon quart del s. I aC i, especialment, durant el regnat d’August, es va desenvolupar a l’antiga província Tarraconensis un sistema productiu centrat en l’explotació agrària vitivinícola amb una finalitat clarament comercial. La majoria d’assentament vitivinícoles es troben emplaçats al litoral català, associats de vegades a figlinae que fabricaven les àmfores per al transport i comerç de l’excedent vinícola. No obstant, a l’àrea del Vallès Occidental i del Baix Llobregat es troben una sèrie de vil•les vinculades a la producció de vi i a la fabricació d’àmfores que han proporcionat restes molt significatives sobre la contribució d’aquesta zona a l’expansió econòmica de la província. La caracterització arqueològica i arqueomètrica d’un gran nombre d’àmfores procedents de diversos tallers ceràmics situats al Vallès Occidental i al Baix Llobregat, utilitzant diverses tècniques d’anàlisi química, mineralògica i petrogràfica, ha portat a establir quins tipus d’àmfores es van fabricar a cada taller i de quina manera. S’han identificat alguns dels processos tecnològics de la cadena operativa: la selecció i processat de les matèries primeres per conformar la pasta procedents, generalment, de l’àrea on es troba cada centre de producció, el modelatge, l’assecat i la cocció de les peces. En alguns dels casos analitzats, s’ha identificat quins tipus de contenidors van ser importants a l’establiment i la seva provinença. La integració d’aquests resultats en la base de dades analítica que disposa l’ERAAUB ha permès avaluar el grau d’estandardització dels processos tecnològics en aquesta àrea. La contrastació final amb les dades històriques i arqueològiques contribueix al coneixement arqueològic de les àmfores vinàries de la Tarraconensis i, a través d’elles, al coneixement de les societats que les van fabricar, comercialitzar i utilitzar.

Simulation methods with extended stability for stiff biochemical kinetics

Background: With increasing computer power, simulating the dynamics of complex systems in chemistry and biology is becoming increasingly routine. The modelling of individual reactions in (bio)chemical systems involves a large number of random events that can be simulated by the stochastic simulation algorithm (SSA). The key quantity is the step size, or waiting time, τ, whose value inversely depends on the size of the propensities of the different channel reactions and which needs to be re-evaluated after every firing event. Such a discrete event simulation may be extremely expensive, in particular for stiff systems where τ can be very short due to the fast kinetics of some of the channel reactions. Several alternative methods have been put forward to increase the integration step size. The so-called τ-leap approach takes a larger step size by allowing all the reactions to fire, from a Poisson or Binomial distribution, within that step. Although the expected value for the different species in the reactive system is maintained with respect to more precise methods, the variance at steady state can suffer from large errors as τ grows. Results: In this paper we extend Poisson τ-leap methods to a general class of Runge-Kutta (RK) τ-leap methods. We show that with the proper selection of the coefficients, the variance of the extended τ-leap can be well-behaved, leading to significantly larger step sizes.Conclusions: The benefit of adapting the extended method to the use of RK frameworks is clear in terms of speed of calculation, as the number of evaluations of the Poisson distribution is still one set per time step, as in the original τ-leap method. The approach paves the way to explore new multiscale methods to simulate (bio)chemical systems.

Impaired fast-spiking, suppressed cortical inhibition and increased susceptibility to seizures in mice lacking Kv3.2 K+ channel proteins

Voltage-gated K+ channels of the Kv3 subfamily have unusual electrophysiological properties, including activation at very depolarized voltages (positive to −10 mV) and very fast deactivation rates, suggesting special roles in neuronal excitability. In the brain, Kv3 channels are prominently expressed in select neuronal populations, which include fast-spiking (FS) GABAergic interneurons of the neocortex, hippocampus, and caudate, as well as other high-frequency firing neurons. Although evidence points to a key role in high-frequency firing, a definitive understanding of the function of these channels has been hampered by a lack of selective pharmacological tools. We therefore generated mouse lines in which one of the Kv3 genes, Kv3.2, was disrupted by gene-targeting methods. Whole-cell electrophysiological recording showed that the ability to fire spikes at high frequencies was impaired in immunocytochemically identified FS interneurons of deep cortical layers (5-6) in which Kv3.2 proteins are normally prominent. No such impairment was found for FS neurons of superficial layers (2-4) in which Kv3.2 proteins are normally only weakly expressed. These data directly support the hypothesis that Kv3 channels are necessary for high-frequency firing. Moreover, we found that Kv3.2 −/− mice showed specific alterations in their cortical EEG patterns and an increased susceptibility to epileptic seizures consistent with an impairment of cortical inhibitory mechanisms. This implies that, rather than producing hyperexcitability of the inhibitory interneurons, Kv3.2 channel elimination suppresses their activity. These data suggest that normal cortical operations depend on the ability of inhibitory interneurons to generate high-frequency firing.

K(+) channel expression distinguishes subpopulations of parvalbumin- and somatostatin-containing neocortical interneurons

Kv3.1 and Kv3.2 K+ channel proteins form similar voltage-gated K+ channels with unusual properties, including fast activation at voltages positive to −10 mV and very fast deactivation rates. These properties are thought to facilitate sustained high-frequency firing. Kv3.1 subunits are specifically found in fast-spiking, parvalbumin (PV)-containing cortical interneurons, and recent studies have provided support for a crucial role in the generation of the fast-spiking phenotype. Kv3.2 mRNAs are also found in a small subset of neocortical neurons, although the distribution of these neurons is different. We raised antibodies directed against Kv3.2 proteins and used dual-labeling methods to identify the neocortical neurons expressing Kv3.2 proteins and to determine their subcellular localization. Kv3.2 proteins are prominently expressed in patches in somatic and proximal dendritic membrane as well as in axons and presynaptic terminals of GABAergic interneurons. Kv3.2 subunits are found in all PV-containing neurons in deep cortical layers where they probably form heteromultimeric channels with Kv3.1 subunits. In contrast, in superficial layer PV-positive neurons Kv3.2 immunoreactivity is low, but Kv3.1 is still prominently expressed. Because Kv3.1 and Kv3.2 channels are differentially modulated by protein kinases, these results raise the possibility that the fast-spiking properties of superficial- and deep-layer PV neurons are differentially regulated by neuromodulators. Interestingly, Kv3.2 but not Kv3.1 proteins are also prominent in a subset of seemingly non-fast-spiking, somatostatin- and calbindin-containing interneurons, suggesting that the Kv3.1–Kv3.2 current type can have functions other than facilitating high-frequency firing.

The neuronal basis of attention: rate versus synchronization modulation

Extensive theoretical and experimental work on the neuronal correlates of visual attention raises two hypotheses about the underlying mechanisms. The first hypothesis, named biased competition, originates from experimental single-cell recordings that have shown that attention upmodulates the firing rates of the neurons encoding the attended features and downregulates the firing rates of the neurons encoding the unattended features. Furthermore, attentional modulation of firing rates increases along the visual pathway. The other, newer hypothesis assigns synchronization a crucial role in the attentional process. It stems from experiments that have shown that attention modulates gamma-frequency synchronization. In this paper, we study the coexistence of the two phenomena using a theoretical framework. We find that the two effects can vary independently of each other and across layers. Therefore, the two phenomena are not concomitant. However, we show that there is an advantage in the processing of information if rate modulation is accompanied by gamma modulation, namely that reaction times are shorter, implying behavioral relevance for gamma synchronization.

Assessing the Political Viability of Labour Market Reform: The Case of Employment Protection

We analyze the political support for employment protection legislation. Unlike my previous work on the same topic, this paper pays a lot of attention to the role of obsolescence in the growth process. In voting in favour of employment protection, incumbent employees trade off lower living standards (because employment protection maintains workers in less productive activities) against longer job duration. The support for employment protection will then depend on the value of the latter relative to the cost of the former. We highlight two key deeterminants of this trade-off: first, the workers' bargaining power, second, the economy's growth rate-more precisely its rate of creative destruction.

Employment Protection, International Specialization, and Innovation

We develop a model to analyse the implications of firing costs on incentives for R&D and international specialization. The Key idea is paying the firing cost, the country with a rigid labor market will tend to produce relatively secure goods, at a late stage of their product life cycle. Under international trade, an international product cycle emerges where, roughly, new goods are first produced in the low firing cost country will specialize in 'secondary innovations', that is, improvements in existing goods, while the low firing cost country will more specialize in 'primary innovation', that is, invention of new goods.

Ex post bargaining, labor coordination and wage formation at the firm level

We lay out a model of wage bargaining with two leading features:bargaining is ex post to relevant investments and there isindividual bargaining in firms without a Union. We compareindividual ex post bargaining to coordinated ex post bargainingand we analyze the effects on wage formation. As opposed to exante bargaining models, the costs of destroying the employmentrelationship play a crucial role in determining wages. Highfiring costs in particular yield a rent for employees. Ourtheory points to a employer size-wage effect that is independentof the production function and market power. We derive a simpleleast squares specification from the theoretical model thatallow us to estimate components of the wage premium fromcoordination. We reject the hypothesis that labor coordinationdoes not alter the extensive form of the bargaining game. Laborcoordination substantially increases bargaining power butdecreases labor's ability to pose costly threats to the firm.

Assesing the political viability of labour market reform: The case of employment protection

We analyze the political support for employment protection legislation.Unlike my previous work on the same topic, this paper pays a lot ofattention to the role of obsolescence in the growth process.In voting in favour of employment protection, incumbent employeestrade off lower living standards (because employment protectionmaintains workers in less productive activities) against longer jobduration. The support for employment protection will then depend onthe value of the latter relative to the cost of the former. Wehighlight two key deeterminants of this trade-off: first, the workers'bargaining power, second, the economy's growth rate-more preciselyits rate of creative destruction.

Organizational capital and employment fluctuations

In this paper I present a model in which production requires two types of labor inputs: regular productive tasks and organizational capital, which is accumulated by workers performing organizational tasks. By allocating more workers from organizational to productive tasks, firms can temporarily increase production without hiring. The availability of this intensive margin of labor adjustment, in combination with adjustment costs along the extensive margin (search frictions, firing costs, training costs), makes it optimal to delay employment adjustments. Simulations indicate that this mechanism is quantitatively important even if only a small fraction of workers perform organizational tasks, and explains why the hiring rate is persistent and why employment is slow to recover after the end of a recession.

The political economy of employment protection

This paper develops a model of job creation and job destruction in agrowing economy with embodied technical progress, that we use toanalyze the political support for employment protection legislationssuch as the ones that are observed in most European countries.We analyze the possibility of Condorcet cycles due to the fact thatworkers about to become unemployed prefer both an increase and areduction in firing costs over the status quo. Despite this problem, we show the existence of local, and sometimes global majority winners.In voting in favour of employment protection, incumbent employeestrade off lower living standards (because employment protectionmaintains workers in less productive activities) against longer job duration. We show that the gains from, and consequently the politicalsupport for employment protection (as defined by maximunjob tenure) are larger, the lower the rate of creative destruction and the largerthe worker's bargaining power. Numerical simulations suggest a hump-shaped response of firing costs to these variables, as well as negative impact of exogeneous turnover on employment protection.

Financing constraints and fixed-term employment contracts

This paper studies the interactions between financing constraints and theemployment decisions of firms when both fixed-term and permanent employmentcontracts are available. We first develop a dynamic model that shows theeffects of financing constraints and firing costs on employment decisions. Oncecalibrated, the model shows that financially constrained firms tend to use moreintensely fixed term workers, and to make them absorb a larger fraction of thetotal employment volatility than financially unconstrained firms do. We testand confirm the predictions of the model on a unique panel data of Italian manufacturingfirms with detailed information about the type of workers employedby the firms and about firm financing constraints.

Employment protection, international specialization and innovation

We develop a model to analyse the implications of firing costs on incentivesfor R&D and international specialization. The Key idea is paying the firingcost, the country with a rigid labor market will tend to produce relativelysecure goods, at a late stage of their product life cycle.Under international trade, an international product cycle emerges where,roughly, new goods are first produced in the low firing cost country willspecialize in 'secondary innovations', that is, improvements in existinggoods, while the low firing cost country will more specialize in 'primaryinnovation', that is, invention of new goods.