Uranium reserve, nuclear fuel cycle delusion, CO2 emission from the sea, and electricity supply: reflections after the fuel meltdown of Fukushima nuclear power units

The Great Tohoku-Kanto earthquake and resulting tsunami has brought considerable attention to the issue of the construction of new power plants. We argue in this paper, nuclear power is not a sustainable solution to energy problems. First, we explore the stock of uranium-235 and the different schemes developed by the nuclear power industry to exploit this resource. Second, we show that these methods, fast breeder and MOX fuel reactors, are not feasible. Third, we show that the argument that nuclear energy can be used to reduce CO2 emissions is false: the emissions from the increased water evaporation from nuclear power generation must be accounted for. In the case of Japan, water from nuclear power plants is drained into the surrounding sea, raising the water temperature which has an adverse affect on the immediate ecosystem, as well as increasing CO2 emissions from increased water evaporation from the sea. Next, a short exercise is used to show that nuclear power is not even needed to meet consumer demand in Japan. Such an exercise should be performed for any country considering the construction of additional nuclear power plants. Lastly, the paper is concluded with a discussion of the implications of our findings.

Millora i implementació de l’eina Open-Source AC2GeoNetwork per ArcCatalog

L’ETC-LUSI ha modificat l’aplicació de publicació de les metadades al portal de GeoNetwork amb l’objectiu de presentar i millorar la publicació de les mateixes, adaptant-se a la nova tipologia d’arxius d’emmagatzematge de les darreres versions del software de la casa ESRI, així com poder-les fer arribar al major nombre d’usuaris possible interessats en el intercanvi d’informació cartogràfica

Emissió ràdio a baixa freqüència en fenòmens eruptius i en fonts esteses de raigs gamma d'alta i molt alta energia

La tasca investigadora presentada en aquesta memòria s'ha centrat en les fonts galàctiques de raigs gamma de molt alta energia LS I +61 303, HESS J1708-410 i HESS J1858+020. La primera és una binària de raigs gamma molt estudiada, formada per una estrella massiva i un objecte compacte. S'ha proposat un escenari on l'objecte compacte seria un púlsar jove, i la interacció del seu vent amb el vent de l'estrella generaria els raigs gamma. De totes formes, no s'ha detectat polsos procedents d'aquest putatiu púlsar. L'investigador va realitzar observacions en fase a 1280 MHz amb el radiotelescopi GMRT, sense trobar-hi polsos, cosa que implica un estricte límit superior de 0,38 mJy a la densitat mitjana de flux polsat en un putatiu púlsar amb un període major que 2 mil•lisegons en el sistema binari LS I +61 303. Per altra banda, HESS J1708-410 i HESS J1858+020 són dues fonts esteses de raigs gamma de molt alta energia de les quals no es coneix cap contrapart a d'altres longituds d'ona. L'investigador les va observar amb el GMRT, quatre vegades HESS J1708-410 (dues a 610 MHz i dues a 1400 MHz) i dues vegades HESS J1858+020 (una a cada freqüència). En les imatges realitzades amb aquestes dades no hi ha emissió estesa coincident amb les regions d'emissió de raigs gamma. HESS J1858+020 se solapa parcialment amb una font estesa que podria ser un SNR. De confirmar-se la falta de contrapartida ràdio de HESS J1708-410, estaríem parlant d'un accelerador hadrònic extraordinàriament eficient, d'una classe desconeguda fins ara.

Herramientas open source para la creación de portales

En aquest treball es proposa una aproximació al món del codi font obert des del punt de vista de la realització de portals col·laboratius i les seves eines involucrades. Per fer-ho, es passa revista als diferents tipus d'aplicacions, plataformes i utilitats que trobem disponibles, i s'agrupen en diferents categories: infraestructura i sistemes, serveis de comunicació, serveis de comunitat, serveis genèrics de portal, eines d'interacció amb sistemes mòbils, eines per al desenvolupament i prova i llibreries de suport.

Plataforma de correo y entorno colaborativo open source

Desplegar una solución fiable, potente y escalable de correo electrónico, en combinación de un entorno colaborativo de aplicaciones, bajo el apadrinamiento de software open source.

Plan de empresa para el desarrollo de nuevas líneas de negocio basadas en soluciones Open Source : Empresa: Most Servicios Informáticos S.L.

Elaboración de un plan de empresa para Most Servicios Informáticos S.L. para el desarrollo de nuevas líneas de negocio basadas en soluciones Open Source.

Estudio de la evolución de los sistemas Open Source de BI durante la última década.

El presente documento tiene por objetivo identificar la evolución que ha tenido la inteligencia de negocios en la ultima década, para determinar en que punto se encuentra y para donde va, además de identificar las alternativas de desarrollo que tiene, apalancándose con las Tecnologías de la Información, y más específicamente con las herramientas empaquetadas de BI de tipo Open Source.Así mismo, la presente investigación identifica las prácticas más convenientes, para sistematizar la elección y adaptación de la inteligencia de negocios en las organizaciones, analizando estas en uncaso exitoso real de implantación de la inteligencia de negocios sobre una herramienta BI tipo Open Source.

Open to the users' needs : combining user-centered design, standards and open source software

This case study introduces our continuous work to enhance the virtual classroom in order to provide faculty and students with an environment open to their needs, compliant with learning standards and, therefore compatible with other e-learning environments, and based on open source software. The result is a modulable, sustainable and interoperable learning environment that can be adapted to different teaching and learning situations by incorporating the LMS integrated tools as well as wikis, blogs, forums and Moodle activities among others.

Reuse of paths in light source animation

In this paper we extend the reuse of paths to the shot from a moving light source. In the classical algorithm new paths have to be cast from each new position of a light source. We show that we can reuse all paths for all positions, obtaining in this way a theoretical maximum speed-up equal to the average length of the shooting path

OpenNebula y Hadoop : Cloud Computing con herramientas Open Source

El presente proyecto consiste en una introducción al "cloud computing" y un estudio en profundidad de las herramientas OpenNebula, dentro del modelo IaaS (Infraestructure as a Service), y Hadoop, dentro del modelo PaaS (Platform as a Service). El trabajo también incluye la instalación, integración, configuración y puesta en marcha de una plataforma "cloud computing" utilizando OpenNebula y Hadoop con el objetivo de aplicar los conceptos teóricos en una solución real dentro de un entorno de laboratorio que puede ser extrapolable a una instalación real.

Open source software expectations in retail businesses of Igualada : an exploratory study

The emergence of open source software in the last years has become a common topic of study in different fields, from the most technical characteristics to the economical aspects. This paper examines the current status about the literature dealing with economics of open source and explores the uses, infrastructure and expectations of retail businesses and institutions of the town of Igualda about it. This qualitative case study finds out that the current equipment and level of uses of ICTs are low and that the current situation of the town stores is receptive to a potential introduction of open source software.

Contribution to Asterisk Open Source Project

With this final master thesis we are going to contribute to the Asterisk open source project. Asterisk is an open source project that started with the main objective of develop an IP telephony platform, completely based on Software (so not hardware dependent) and under an open license like GPL. This project was started on 1999 by the software engineer Mark Spencer at Digium. The main motivation of that open source project was that the telecommunications sector is lack of open solutions, and most of the available solutions are based on proprietary standards, which are close and not compatible between them. Behind the Asterisk project there is a company, Digum, which is the project leading since the project was originated in its laboratories. This company has some of its employees fully dedicated to contribute to the Asterisk project, and also provide the whole infrastructure required by the open source project. But the business of Digium isn't based on licensing of products due to the open source nature of Asterisk, but it's based on offering services around Asteriskand designing and selling some hardware components to be used with Asterisk. The Asterisk project has grown up a lot since its birth, offering in its latest versions advanced functionalities for managing calls and compatibility with some hardware that previously was exclusive of proprietary solutions. Due to that, Asterisk is becoming a serious alternative to all these proprietaries solutions because it has reached a level of maturity that makes it very stable. In addition, as it is open source, it can be fully customized to a givenrequirement, which could be impossible with the proprietaries solutions. Due to the bigness that is reaching the project, every day there are more companies which develop value added software for telephony platforms, that are seriously evaluating the option of make their software fully compatible withAsterisk platforms. All these factors make Asterisk being a consolidated project but in constant evolution, trying to offer all those functionalities offered by proprietaries solutions. This final master thesis will be divided mainly in two blocks totally complementaries. In the first block we will analyze Asterisk as an open source project and Asterisk as a telephony platform (PBX). As a result of this analysis we will generate a document, written in English because it is Asterisk project's official language, which could be used by future contributors as an starting point on joining Asterisk. On the second block we will proceed with a development contribution to the Asterisk project. We will have several options in the form that we do the contribution, such as solving bugs, developing new functionalities or start an Asterisk satellite project. The type of contribution will depend on the needs of the project on that moment.

Engineering the thermal emission of macroporous silicon

Todos los cuerpos emiten luz espontaneamente al ser calentados. El espectro de radiacion es una funcion de la temperatura y el material. Sin embargo, la mayoria de los materiales irradia, en general, en una banda espectral amplia. Algunas matereiales, por el contrario, son capaces de concentrar la radiacion termica en una banda espectral mucho mas estrecha. Estos materiales se conocen como emisores selectivos y su uso tiene un profundo impacto en la eficiencia de sistemas sistemas tales como iluminacion y conversion de energia termofotovoltaica. De los emisores selectivos se espera que sean capaces de operar a altas temperaturas y que emitan en una banda espectral muy concisa. Uno de los metodos mas prometedores para controlar y disenar el espectro de emision termico es la utilizacion de cristales fotonicos. Los cristales fotonicos son estructuras periodicas artificiales capaces de controlar y confinar la luz de formas sin precedentes. Sin embargo, la produccion de dichas estructuras con grandes superficies y capaces de soportar altas temperaturas sigue siendo una dificil tarea. Este trabajo esta dedicada al estudio de las propiedades de emision termica de estructuras 3D de silicio macroporoso en el rango espectral mid-IR (2-30 m). En particular, este trabajo se enfoca en reducir la elevada emisividad del silicio cristalino. Las muestras estudiadas en este trabajo tienen una periodicidad de 4 m, lo que limitan los resultados obtenidos a la banda del infrarrojo medio, aunque estructuras mucho mas pequenas son tecnologicamente realizables con el metodo de fabricacion utilizado. Hemos demostrado que el silicio macroporoso 3D puede inhibir completamente la emision termica en su superficie. Mas aun, esta banda se puede ajustar en un amplio margen mediante pequenos cambios durante la formacion de los macroporos. Tambien hemos demostrado que tanto el ancho como la frecuencia de la banda de inhibicion se puede doblar mediante la aplicacion de tecnicas de postprocesado adecuadas. Finalmente hemos mostrado que es posible crear bandas de baja emisividad arbitrariamente anchas mediante estructuras macroporosas aperiodicas.

Two methods for voltage sag source location

This paper presents and compares two approaches to estimate the origin (upstream or downstream) of voltage sag registered in distribution substations. The first approach is based on the application of a single rule dealing with features extracted from the impedances during the fault whereas the second method exploit the variability of waveforms from an statistical point of view. Both approaches have been tested with voltage sags registered in distribution substations and advantages, drawbacks and comparative results are presented

A hybrid method for sag source location in power network

The work presented in this paper belongs to the power quality knowledge area and deals with the voltage sags in power transmission and distribution systems. Propagating throughout the power network, voltage sags can cause plenty of problems for domestic and industrial loads that can financially cost a lot. To impose penalties to responsible party and to improve monitoring and mitigation strategies, sags must be located in the power network. With such a worthwhile objective, this paper comes up with a new method for associating a sag waveform with its origin in transmission and distribution networks. It solves this problem through developing hybrid methods which hire multiway principal component analysis (MPCA) as a dimension reduction tool. MPCA reexpresses sag waveforms in a new subspace just in a few scores. We train some well-known classifiers with these scores and exploit them for classification of future sags. The capabilities of the proposed method for dimension reduction and classification are examined using the real data gathered from three substations in Catalonia, Spain. The obtained classification rates certify the goodness and powerfulness of the developed hybrid methods as brand-new tools for sag classification