Estudio para la extracción automatizada de contextos de significancia en JPEG2000

Se ha desarrollado un trabajo de investigación para arrojar un haz de luz en ciertas regiones de interés en la codificación del estándar JPEG2000. La finalidad de esta investigación, es estudiar la posibilidad de realizar una extracción automatizada de contextos durante el proceso de codificación, de modo que se ajusten a la imagen procesada y observar qué ventajas nos aporta esto frente a los contextos establecidos por el estándar JPEG2000.

Una primera aproximació a la selecció d'un sistema automatitzat de biblioteques

Res no pot garantir que un procés de selecció d'un sistema automatitzat arribi a tenir èxit, però l'observació d'un conjunt de principis de sentit comú pot ajudar a assegurar l'èxit del resultat. El procés ha de centrar-se en el llarg termini i ha de tenir present el context institucional en el qual el sistema s'establirà. Els sistemes estan cada vegada més orientats als usuaris, i per tant el compromís dels usuaris en el procés de selecció és més i més important. Els components del procés de selecció poden ser previstos i combinats de moltes maneres diferents. El procediment usat per les Purdue University Libraries serveix per a il·lustrar una via en la realització pràctica d'un procés.

Automatización de la gestión del ciclo de vida de entornos Linux y Solaris

Los requisitos del Negocio que requieren un gran crecimiento generan mayor complejidad en los Centros de Cómputo.Son los administradores quienes necesitan gestionar el creciente volumen de datos, aplicaciones, y usuarios, así como la rápida proliferación de los servidores y los diferentes sistemas operativos. En este proyecto se pretende reducir la complejidad en la gestión de los Centros de Cómputo, combinando la automatización de la gestión del ciclo de vida y todas las medidas de contingencia necesarias para mantener la integridad de los mismos.

Measuring intergenerational earnings mobility in Spain: a selection-bias-free approach

This paper analyses intergenerational earnings mobility in Spain correcting for different selection biases. We address the co-residence selection problem by combining information from two samples and using the two-sample two-stage least square estimator. We find a small decrease in elasticity when we move to younger cohorts. Furthermore, we find a higher correlation in the case of daughters than in the case of sons; however, when we consider the employment selection in the case of daughters, by adopting a Heckman-type correction method, the diference between sons and daughters disappears. By decomposing the sources of earnings elasticity across generations, we find that the correlation between child's and father's occupation is the most important component. Finally, quantile regressions estimates show that the influence of the father's earnings is greater when we move to the lower tail of the offspring's earnings distribution, especially in the case of daughters' earnings.

Testing low-altitude infrared digital photography from a mini-UAV to retrieve information for biological conservation

Satellite remote sensing imagery is used for forestry, conservation and environmental applications, but insufficient spatial resolution, and, in particular, unavailability of images at the precise timing required for a given application, often prevent achieving a fully operational stage. Airborne remote sensing has the advantage of custom-tuned sensors, resolution and timing, but its price prevents using it as a routine technique for the mentioned fields. Some Unmanned Aerial Vehicles might provide a “third way” solution as low-cost techniques for acquiring remotely sensed information, under close control of the end-user, albeit at the expense of lower quality instrumentation and instability. This report evaluates a light remote sensing system based on a remotely-controlled mini-UAV (ATMOS-3) equipped with a color infra-red camera (VEGCAM-1) designed and operated by CATUAV. We conducted a testing mission over a Mediterranean landscape dominated by an evergreen woodland of Aleppo pine (Pinus halepensis) and (Holm) oak (Quercus ilex) in the Montseny National Park (Catalonia, NE Spain). We took advantage of state-of-the-art ortho-rectified digital aerial imagery (acquired by the Institut Cartogràfic de Catalunya over the area during the previous year) and used it as quality reference. In particular, we paid attention to: 1) Operationality of flight and image acquisition according to a previously defined plan; 2) Radiometric and geometric quality of the images; and 3) Operational use of the images in the context of applications. We conclude that the system has achieved an operational stage regarding flight activities, although with meteorological limits set by wind speed and turbulence. Appropriate landing areas can be sometimes limiting also, but the system is able to land on small and relatively rough terrains such as patches of grassland or short matorral, and we have operated the UAV as far as 7 km from the control unit. Radiometric quality is sufficient for interactive analysis, but probably insufficient for automated processing. A forthcoming camera is supposed to greatly improve radiometric quality and consistency. Conventional GPS positioning through time synchronization provides coarse orientation of the images, with no roll information.

System GMM estimation with a small sample

Properties of GMM estimators for panel data, which have become very popular in the empirical economic growth literature, are not well known when the number of individuals is small. This paper analyses through Monte Carlo simulations the properties of various GMM and other estimators when the number of individuals is the one typically available in country growth studies. It is found that, provided that some persistency is present in the series, the system GMM estimator has a lower bias and higher efficiency than all the other estimators analysed, including the standard first-differences GMM estimator.

Series enlazadas de algunos agregados económicos nacionales y regionales, 1955-2007 Versión 2.1

I construct "homogeneous" series of GVA at current and constant prices, employment and population for the Spain and its regions covering the period 1955-2007. The series are obtained by linking the Regional Accounts of the National Statistical Institute with the series constructed by Julio Alcaide and his team for the BBVA Foundation. The "switching point" at which this last source stops being used as a reference to construct the linked series is determined using a procedure that allows me to estimate which of the two competing series would produce an estimator with the lowest MSE when it is used as dependent variable in a regression on an arbitrary independent variable. To the extent that it is possible, the difference between the two series found at the point of linkage is distributed between the initial levels of the older series and its subsequent growth using external estimates of the relevant variables at the beginning of the sample period.

A Data mining approach to indirect inference

Consider a model with parameter phi, and an auxiliary model with parameter theta. Let phi be a randomly sampled from a given density over the known parameter space. Monte Carlo methods can be used to draw simulated data and compute the corresponding estimate of theta, say theta_tilde. A large set of tuples (phi, theta_tilde) can be generated in this manner. Nonparametric methods may be use to fit the function E(phi|theta_tilde=a), using these tuples. It is proposed to estimate phi using the fitted E(phi|theta_tilde=theta_hat), where theta_hat is the auxiliary estimate, using the real sample data. This is a consistent and asymptotically normally distributed estimator, under certain assumptions. Monte Carlo results for dynamic panel data and vector autoregressions show that this estimator can have very attractive small sample properties. Confidence intervals can be constructed using the quantiles of the phi for which theta_tilde is close to theta_hat. Such confidence intervals are found to have very accurate coverage.

Estimation of dynamic latent variable models using simulated nonparametric moments

Abstract. Given a model that can be simulated, conditional moments at a trial parameter value can be calculated with high accuracy by applying kernel smoothing methods to a long simulation. With such conditional moments in hand, standard method of moments techniques can be used to estimate the parameter. Because conditional moments are calculated using kernel smoothing rather than simple averaging, it is not necessary that the model be simulable subject to the conditioning information that is used to define the moment conditions. For this reason, the proposed estimator is applicable to general dynamic latent variable models. It is shown that as the number of simulations diverges, the estimator is consistent and a higher-order expansion reveals the stochastic difference between the infeasible GMM estimator based on the same moment conditions and the simulated version. In particular, we show how to adjust standard errors to account for the simulations. Monte Carlo results show how the estimator may be applied to a range of dynamic latent variable (DLV) models, and that it performs well in comparison to several other estimators that have been proposed for DLV models.

SNM Guide

This is a guide that explains how to use software that implements the simulated nonparametric moments (SNM) estimator proposed by Creel and Kristensen (2009). The guide shows how results of that paper may easily be replicated, and explains how to install and use the software for estimation of simulable econometric models.

Aprenentatges i oportunitats després de la implementació d'un nou sistema automatitzat

Es descriuen els aprenentatges, canvis i oportunitats arrel del procés de canvi del sistema de gestió de biblioteques del CCUC i dels altres catàlegs del CBUC. S’inicia amb una introducció sobre la decisió d’emprendre conjuntament el procés de canvi de sistema i com es va planificar i organitzar la seva implementació. Detalla actuacions prèvies que es van realitzar com el procés de canvi de format MARC, descriu el nou entorn que aquest canvi permet al CBUC, com oferir la gestió, hostatjament i manteniment de sistemes automatitzats per catàlegs locals i relaciona les millores d’OPAC. Finalment s'elaboren unes consideracions generals sobre els aprenentatges i oportunitats arrel d’aquest procés, amb la finalitat que siguin d’utilitat en futures experiències similars.

An empirical analysis of a merger between a network and low-cost airlines

We use a difference-in-difference estimator to examine the effects of a merger involving three airlines. The novelty lies in the examination of this operation in two distinct scenarios: (1) on routes where two low-cost carriers and (2) on routes where a network and one of the low-cost airlines had previously been competing. We report a reduction in frequencies but no substantial effect on prices in the first scenario, while in the second we report an increase in prices but no substantial effect on frequencies. These results may be attributed to the differences in passenger types flying on these routes.

Desarrollo de un sistema integrado de navegación inercial: interfície IMU + FPGA

Els sistemes automatitzats que requereixen d’un control d’estabilitat o moviment es poden trobar cada cop en més àmbits. Aplicacions UAV o de posicionament global són les més comunes per aquest tipus de sistemes, degut a que necessiten d’un control de moviment molt precís. Per a dur a terme aquest procés s’utilitzen unitats de mesura inercial, que mitjançant acceleròmetres i giroscopis degudament posicionats, a més a més d’una correcció del possible error que puguin introduir aquests últims, proporcionen una acceleració i una velocitat angular de les quals es pot extreure el camí efectuat per aquestes unitats. La IMU, combinada amb un GPS i mitjançant un filtre de Kalman, proporcionen una major exactitud , a més d’un punt de partida (proporcionat per el GPS), un recorregut representable en un mapa y, en el cas de perdre la senyal GPS, poder seguir adquirint dades de la IMU. Aquestes dades poden ser recollides i processades per una FPGA, que a la vegada podem sincronitzar amb una PDA per a que l’usuari pugui veure representat el moviment del sistema. Aquest treball es centra en el funcionament de la IMU i l’adquisició de dades amb la FPGA. També introdueix el filtre de Kalman per a la correcció de l’error dels sensors.

How does monetary policy change? evidence on inflation targeting countries

We examine the evolution of monetary policy rules in a group of inflation targeting countries (Australia, Canada, New Zealand, Sweden and the United Kingdom) applying moment- based estimator at time-varying parameter model with endogenous regressors. Using this novel flexible framework, our main findings are threefold. First, monetary policy rules change gradually pointing to the importance of applying time-varying estimation framework. Second, the interest rate smoothing parameter is much lower that what previous time-invariant estimates of policy rules typically report. External factors matter for all countries, albeit the importance of exchange rate diminishes after the adoption of inflation targeting. Third, the response of interest rates on inflation is particularly strong during the periods, when central bankers want to break the record of high inflation such as in the U.K. or in Australia at the beginning of 1980s. Contrary to common wisdom, the response becomes less aggressive after the adoption of inflation targeting suggesting the positive effect of this regime on anchoring inflation expectations. This result is supported by our finding that inflation persistence as well as policy neutral rate typically decreased after the adoption of inflation targeting.

Indirect likelihood inference

Given a sample from a fully specified parametric model, let Zn be a given finite-dimensional statistic - for example, an initial estimator or a set of sample moments. We propose to (re-)estimate the parameters of the model by maximizing the likelihood of Zn. We call this the maximum indirect likelihood (MIL) estimator. We also propose a computationally tractable Bayesian version of the estimator which we refer to as a Bayesian Indirect Likelihood (BIL) estimator. In most cases, the density of the statistic will be of unknown form, and we develop simulated versions of the MIL and BIL estimators. We show that the indirect likelihood estimators are consistent and asymptotically normally distributed, with the same asymptotic variance as that of the corresponding efficient two-step GMM estimator based on the same statistic. However, our likelihood-based estimators, by taking into account the full finite-sample distribution of the statistic, are higher order efficient relative to GMM-type estimators. Furthermore, in many cases they enjoy a bias reduction property similar to that of the indirect inference estimator. Monte Carlo results for a number of applications including dynamic and nonlinear panel data models, a structural auction model and two DSGE models show that the proposed estimators indeed have attractive finite sample properties.