Desarrollo de la materia Proyectos. Grado de Comunicación Audiovisual. Universitat de Barcelona

El objetivo del presente trabajo es presentar la propuesta de desarrollo de la materia Proyectos del Grado de Comunicación Audiovisual de la Universidad de Barcelona, que incluye las asignaturas Proyectos I y Proyectos II. Ambas asignaturas son especialmente idóneas para trabajar las competencias transversales del grado, dado que el objetivo de la materia a la que pertenecen es integrar las competencias adquiridas en el conjunto de asignaturas cursadas por los alumnos hasta este momento, poniendo en relación los diferente lenguajes (escrito, oral, audiovisual y multimedia). Todo esto permite que el estudiante adquiera una visión integral y transversal. El presente trabajo reflexiona sobre los mecanismos que permitan al profesorado diseñar de forma colaborativa pautas y estrategias de enseñanza-aprendizaje; los modos de evaluación de las competencias de estas asignaturas, y todos aquellos aspectos claves que deben recoger los planes docentes. Materias como la de Proyectos suponen un reto en la actividad docente, al requerir del trabajo interdisciplinar e integrador de las áreas de conocimiento implicadas y de los docentes vinculados, al tiempo que facilitan la generación de puentes entre el ámbito académico y profesional.

Materials selection for superheater tubes in municipal solid waste incineration plants

Corrosion reduces the lifetime of municipal solid waste incineration (MSWI) superheater tubes more than any other cause. It can be minimized by the careful selection of those materials that are most resistant to corrosion under operating conditions. Since thousands of different materials are already known and many more are developed every year, here the selection methodology developed by Prof. Ashby of the University of Cambridge was used to evaluate the performance of different materials to be used as MSWI superheater tubes. The proposed materials can operate at steam pressures and temperatures over 40 bars and 400ºC, respectively. Two case studies are presented: one makes a balanced selection between mechanical properties and cost per thermal unit; and the other focuses on increasing tube lifetime. The balanced selection showed that AISI 410 martensitic stainless steel (wrought, hard tempered) is the best candidate with a good combination of corrosion resistance, a relatively low price (0.83-0.92 e/kg) and a good thermal conductivity (23-27 W/m K). Meanwhile, Nitronic 50/XM-19 stainless steel is the most promising candidate for longterm selection, as it presents high corrosion resistance with a relatively low price (4.86-5.14 e/kg) compared to Ni-alloys.

Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials

Rapid manufacturing is an advanced manufacturing technology based on layer-by-layer manufacturing to produce a part. This paper presents experimental work carried out to investigate the effects of scan speed, layer thickness, and building direction on the following part features: dimensional error, surface roughness, and mechanical properties for DMLS with DS H20 powder and SLM with CL 20 powder (1.4404/AISI 316L). Findings were evaluated using ANOVA analysis. According to the experimental results, build direction has a significant effect on part quality, in terms of dimensional error and surface roughness. For the SLM process, the build direction has no influence on mechanical properties. Results of this research support industry estimating part quality and mechanical properties before the production of parts with additive manufacturing, using iron-based powders

Reconstrucción y activación del patrimonio artístico con tecnología audiovisual. Experiencia de Taüll 1123

With the aim of preserving artistic heritage, museums have typically removed paintings and furniture from the places they were created for. Over the decades, the curators of these places have begun to request that these artistic works be returned, conscious of the significance that many of these works now have. Some institutions and museums have responded to these requests by providing copies of the original works. Although traditionally these copies were handmade, digital resources, such as audiovisual technology, are now being used. The Taüll 1123 project (Lleida, Spain) is an example of the use of these new tools for the benefit of artistic heritage and of modern visitors.

Característiques bàsiques de l’organització d’espais, d’ambients i dels tipus de materials que hauria d’estar present en les escoles d’educació infantil (3-6) per garantir pràctiques educatives de qualitat

Amb el present treball es vol aprofundir en la manera que influeix l’organització d’espais, d’ambients i les característiques dels materials en el procés educatiu. A partir d’una recerca teòrica en base les necessitats educatives de la societat actual, les necessitats evolutives dels infants, i en base a l’observació i anàlisi d’escoles reggianes i catalanes referents que tenen en compte com a agent educador l’espai, els ambients i els materials, es volen reunir quines són les característiques bàsiques de l’organització dels espais, ambients i materials per garantir una educació de qualitat a l’etapa infantil (3-6).

Exploring new criteria to design materials for online education

Peer-reviewed

Proposta de seqüenciació didàctica en relació a les aportacions de l’àrea d’educació física a la competència comunicativa lingüística i audiovisual

El present article recull reflexions i propostes sobre les aportacions que ofereix l’àrea d’educació física aldesenvolupament de la competència comunicativa, amb l’objectiu de col·laborar activament a millorar-la. Desd’aquest compromís, en primer lloc, s’indiquen les capacitats relacionades amb la competència comunicativai, posteriorment, es relacionen aquestes capacitats des de l’especificitat de les situacions d’aprenentatge queaporta l’àrea d’educació física

Origin of magnetic and magnetoelastic tweedlike precursor modulations in ferroic materials

Based on experimental observations of modulated magnetic patterns in a Co0.5Ni0.205Ga0.295 alloy, we propose a model to describe a (purely) magnetic tweed and a magnetoelastic tweed. The former arises above the Curie (or Nel) temperature due to magnetic disorder. The latter results from compositional fluctuations coupling to strain and then to magnetism through the magnetoelastic interaction above the structural transition temperature. We discuss the origin of purely magnetic and magnetoelastic precursor modulations and their experimental thermodynamic signatures.

Importance of the embedding environment on the strain within small rings in siliceous materials

The effect of the local environment on the energetic strain within small (SiO)N rings (with N=2,3) in silica materials is investigated via periodic model systems employing density functional calculations. Through comparison of the energies of various nonterminated systems containing small rings in strained and relatively unstrained environments, with alpha quartz, we demonstrate how small ring strain is affected by the nature of the embedding environment. We compare our findings with numerous previously reported calculations, often predicting significantly different small-ring strain energies, leading to a critical assessment of methods of calculating accurate localized ring energies. The results have relevance for estimates of the strain-induced response (e.g., chemical, photo, and radio) of small silica rings, and the propensity for them to form in bulk glasses, thin films, and nanoclusters.

The FaceUOC Project : An Open Social Learning experience by the Open University of Catalonia

The possibilities and expansion of the use of Web 2.0 has opened up a world of possibilities in online learning. In spite of the integration of these tools in education major changes are required in the educational design of instructional processes.This paper presents an educational experience conducted by the Open University of Catalonia using the social network Facebook for the purpose of testing a learning model that uses a participation and collaboration methodology among users based on the use of open educational resources.- The aim of the experience is to test an Open Social Learning (OSL) model, understood to be a virtual learning environment open to the Internet community, based on the use of open resources and on a methodology focused on the participation and collaboration of users in the construction of knowledge.- The topic chosen for this experience in Facebook was 2.0 Journeys: online tools and resources. The objective of this 5 weeks course was to provide students with resources for managing the various textual, photographic, audiovisual and multimedia materials resulting from a journey.- The most important changes in the design and development of a course based on OSL are the role of the teacher, the role of the student, the type of content and the methodology:- The teacher mixes with the participants, guiding them and offering the benefit of his/her experience and knowledge.- Students learn through their participation and collaboration with a mixed group of users.- The content is open and editable under different types of license that specify the level of accessibility.- The methodology of the course was based on the creation of a learning community able to self-manage its learning process. For this a facilitator was needed and also a central activity was established for people to participate and contribute in the community.- We used an ethnographic methodology and also questionnaires to students in order to acquire results regarding the quality of this type of learning experience.- Some of the data obtained raised questions to consider for future designs of educational situations based on OSL:- Difficulties in breaking the facilitator-centred structure- Change in the time required to adapt to the system and to achieve the objectives- Lack of commitment with free courses- The trend to return to traditional ways of learning- Accreditation- This experience has taught all of us that education can happen any time and in any place but not in any way.

El Uso del cine en el aula de ELE

En los últimos años existe un interés creciente en la incorporación de material audiovisual en las aulas de ELE gracias, en mayor medida, al avance de las nuevas tecnologías que facilitan su uso. Sin embargo, todavía no se saca todo su potencial como material para trabajar las destrezas interculturales que contempla el actual MECD. En el siguiente ensayo apuntaremos algunas de esas razones, sobre el cine en general y el español en particular, y las diferentes aproximaciones que pueden contemplarse según las características del alumnado

Hydrology, light and the use of organic and inorganic materials as structuring factors of biological communities in Mediterranean streams

Hydrological disturbances, light availability and nutrients are the most relevant factors determining the structure of the biological communities in Mediterranean rivers. While some hydrological disturbances are able to induce catastrophic effects, which may cause a complete reset in physical and biological conditions, continued enrichment or changes in light availability are factors leading to the progressive shift in the communities of autotrophs and heterotrophs in the systems. Primary production in Mediterranean streams shows relevant seasonal changes which mainly follows the variations in light availability. In most forested streams, the algal community is shade-adapted. Nutrient enrichment (especially phosphorus) leads to marked increases in primary production, but this increase is not lineal and there is a saturation of algal biomass even in the most enriched systems. The heterotrophs (bacteria, fungi) are related to the pattern of DOC availability (which most depends on the seasonal discharge and leaf fall dynamics) and to the available substrata in the stream. It has been repeatedly observed that shorttime increases of extracellular enzyme activities are related to the accumulation of autochthonous (algal) and/or allochthonous (leaves) organic matter on the streambed during spring and summer, this being more remarkable in dry than in wetter years. Flow reduction favours detritus concentration in pools, and the subsequent increase in the density and biomass of the macroinvertebrate community. In Mediterranean streams collectors are accounting for the highest density and biomass, this being more remarkable in the least permanent systems, in accordance with the effect of floods on the organic matter availability. Nutrients, through the effect on the primary producers, also affect the trophic food web in the streams by favouring the predominance of grazers

On the Rule of Mixtures for Predicting Stress-Softening and Residual Strain Effects in Biological Tissues and Biocompatible Materials

In this work, we use the rule of mixtures to develop an equivalent material model in which the total strain energy density is split into the isotropic part related to the matrix component and the anisotropic energy contribution related to the fiber effects. For the isotropic energy part, we select the amended non-Gaussian strain energy density model, while the energy fiber effects are added by considering the equivalent anisotropic volumetric fraction contribution, as well as the isotropized representation form of the eight-chain energy model that accounts for the material anisotropic effects. Furthermore, our proposed material model uses a phenomenological non-monotonous softening function that predicts stress softening effects and has an energy term, derived from the pseudo-elasticity theory, that accounts for residual strain deformations. The model’s theoretical predictions are compared with experimental data collected from human vaginal tissues, mice skin, poly(glycolide-co-caprolactone) (PGC25 3-0) and polypropylene suture materials and tracheal and brain human tissues. In all cases examined here, our equivalent material model closely follows stress-softening and residual strain effects exhibited by experimental data

An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials

A thermodynamically consistent damage model for the simulation of progressive delamination under variable mode ratio is presented. The model is formulated in the context of the Damage Mechanics. The constitutive equation that results from the definition of the free energy as a function of a damage variable is used to model the initiation and propagation of delamination. A new delamination initiation criterion is developed to assure that the formulation can account for changes in the loading mode in a thermodynamically consistent way. The formulation proposed accounts for crack closure effets avoiding interfacial penetration of two adjacent layers aftercomplete decohesion. The model is implemented in a finite element formulation. The numerical predictions given by the model are compared with experimental results

Anàlisi energètic de deformació incremental de xapa en materials polimèrics

Existeixen diversos estudis que avaluen el consum energètic derivat del procés de producció deISF (Incremental Sheet Forming), principalment per materials metàl•lics. Per tant, l’objectiu d’aquest projecte ésdeterminar el consum energètic en la conformació de materials plàstics en aquest procés.S’estudiarà el consum energètic mesurant l’energia elèctrica necessària per al procés, utilitzantdiferents paràmetres i estratègies de fabricació, com poden ser diferents materialspolimèrics, trajectòries variades de conformat, diferents velocitats d’avanç i rotació i diferentsgeometries.Un cop analitzat el consum energètic derivat de la fabricació amb ISF es valorarà l’impacteambiental que provoca aquesta tecnologia