In-situ X-ray diffraction studies during growth of Ni-Ti shape memory alloy films and their complementary ex-situ characterization

Shape Memory Alloy (SMA) Ni-Ti films have attracted much interest as functional and smart materials due to their unique properties. However, there are still important issues unresolved like formation of film texture and its control as well as substrate effects. Thus, the main challenge is not only the control of the microstructure, including stoichiometry and precipitates, but also the identification and control of the preferential orientation since it is a crucial factor in determining the shape memory behaviour. The aim of this PhD thesis is to study the optimisation of the deposition conditions of films of Ni-Ti in order to obtain the material fully crystallized at the end of the deposition, and to establish a clear relationship between the substrates and texture development. In order to achieve this objective, a two-magnetron sputter deposition chamber has been used allowing to heat and to apply a bias voltage to the substrate. It can be mounted into the six-circle diffractometer of the Rossendorf Beamline (ROBL) at the European Synchrotron Radiation Facility (ESRF), Grenoble, France, enabling an in-situ characterization by X-ray diffraction(XRD) of the films during their growth and annealing. The in-situ studies enable us to identify the different steps of the structural evolution during deposition with a set of parameters as well as to evaluate the effect of changing parameters on the structural characteristics of the deposited film. Besides the in-situ studies, other complementary ex-situ characterization techniques such as XRD at a laboratory source, Rutherford backscattering spectroscopy(RBS), Auger electron spectroscopy (AES), cross-sectional transmission electron microscopy (X-TEM), scanning electron microscopy (SEM), and electrical resistivity (ER) measurements during temperature cycling have been used for a fine structural characterization. In this study, mainly naturally and thermally oxidized Si(100) substrates, TiN buffer layers with different thicknesses (i.e. the TiN topmost layer crystallographic orientation is thickness dependent) and MgO(100) single crystals were used as substrates. The chosen experimental procedure led to a controlled composition and preferential orientation of the films. The type of substrate plays an important role for the texture of the sputtered Ni-Ti films and according to the ER results, the distinct crystallographic orientations of the Ni-Ti films influence their phase transformation characteristics.

Kinetic, Structural, and EPR Studies Reveal That Aldehyde Oxidoreductase from Desulfovibrio gigas Does Not Need a Sulfido Ligand for Catalysis and Give Evidence for a Direct Mo-C Interaction in a Biological System

J. Am. Chem. Soc., 2009, 131 (23), pp 7990–7998 DOI: 10.1021/ja809448r

Correlating EPR and X-ray structural analysis of arsenite-inhibited forms of aldehyde oxidoreductase

J Biol Inorg Chem (2007) 12:353–366 DOI 10.1007/s00775-006-0191-9

Radiation damage in flexible TFTs and organic detectors

In this thesis was investigated the radiation hardness of the building blocks of a future flexible X-ray sensor system. The characterized building blocks for the pixel addressing and signal amplification electronics are high mobility semiconducting oxide transistors (HMSO-TFTs) and organic transistors (OTFTs), whereas the photonic detection system is based on organic semiconducting single crystals (OSSCs). TFT parameters such as mobility, threshold voltage and subthreshold slope were measured as function of cumulative X-ray dose. Instead for OSSCs conductivity and X-ray sensitivity were analysed after various radiation steps. The results show that ionizing radiation does not lead to degradation in HMSO-TFTs. Instead OTFTs show instability in mobility which is reduced up to 73% for doses of 1 kGy. OSSC demonstrate stable detector properties for the tested total dose range. As conclusion, HMSO-TFTs and OSSCs can be readily employed in the X-ray detector system allowing operation for total doses exceeding 1 kGy of ionizing radiation.

Assessment of climate change statistical downscaling methods: Application and comparison of two statistical methods to a single site in Lisbon

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia do Ambiente

Structure to function studies in UDP-glucose dehydrogenases and nitroreductases

The thesis is divided into two parts corresponding to structural studies on two different proteins. The first part concerns the study of two UDP-glucose dehydrogenases (UGDs) from Sphingomonas elodea ATCC 31461 and Burkholderia cepacia IST 408, both involved in exopolysaccharide production. Their relevance arises because some of these bacterial exopolysaccharides are valuable as established biotechnological products, the former case, whilst others are highly problematic, when used by pathogens in biofilm formation over biological surfaces, as the latter case, namely in the human lungs. The goal of these studies is to increase our knowledge regarding UGDs structural properties, which can potentiate either the design of activity enhancers to respond to the increased demand of useful biofilms, or the design of inhibitors of biofilm production, in order to fight invading pathogens present in several infections. The thesis reports the production and crystallisation of both proteins, the determination of initial phases by single-wavelength anomalous dispersion (SAD) in S. elodea crystals using a seleno-methionine isoform, and phasing of B. cepacia crystals by molecular replacement (MR) using the S. elodea model, as well as the refinement, structural analysis and comparison between the several UGDs structures available during this work.(...)

New fluorescent chemosensors based on bio-inspired ligands and macrocycles: from single molecules to nanoparticles

Dissertação apresentada para obtenção do grau de Doutor em Biotecnologia pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia. A presente dissertação foi preparada no âmbito do protocolo de acordo bilateral de educação avançada (ERASMUS) entre a Universidade de Vigo e a Universidade Nova de Lisboa

Produção de SCO (Single Cell Oil) para biodiesel a partir da microalga Chlorella protothecoides em diversos bioreactores com troca simbiótica de correntes gasosas

Dissertação para obtenção do Grau de Mestre em Biotecnologia

Heterodimeric nitrate reductase (NapAB) from Cupriavidus necator H16: purification, crystallization and preliminary X-ray analysis

Acta Cryst. (2007). F63, 516–519

Single operation multiple data - paralelismo de dados ao nível da sub-rotina

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Caracterização de estirpes Mycobacterium Tuberculosis da família Lisboa: análise de regiões de diferença e single nucleotide polymorphisms

Dissertação apresentada para a obtenção do Grau de Mestre em Genética Molecular e Biomedicina, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

The additive effects in matrix dispersed liquid crystals

Dissertation presented at Faculdade de Ciências e Tecnologia from Universidade Nova de Lisboa to obtain the degree of Master in Chemical and Biochemical Engineering

A nanopore-based stochastic detection method: Single molecule characterisation of nanoparticles using ()- hemolysin

Dissertation presented to obtain the Ph.D degree in Chemistry.

Caracterização de múltiplos polimorfismos de Pneumocystis Jirovecii por multiplex-PCR/Single base extension

Pneumocystis jirovecii é conhecido por causar infecções específicas no aparelho respiratório de seus hospedeiros, principalmente em doentes imunocomprometidos, manifestando-se por uma pneumonia grave e por vezes fatal, normalmente designada por pneumonia por Pneumocystis. A caracterização da diversidade genética de P. jirovecii tem demonstrado que determinados polimorfismos de base única poderão ser reconhecidos como marcadores moleculares de eleição para o estudo da distribuição geográfica, vias de transmissão, resistência/susceptibilidade a fármacos, factores de virulência e genética populacional de subtipos genéticos. Este estudo teve como objectivo a caracterização de polimorfismos de P. jirovecii, através da metodologia PCR multiplex/Extensão de base única (do inglês single base extension), com a principal finalidade de constatar eventuais associações entre polimorfismos de base única, genótipos multilocus, e dados clínicos e demográficos da infecção. Sessenta e seis espécimes pulmonares, previamente considerados positivos para P. jirovecii, obtidos entre 2001 e 2012, a partir de doentes portugueses imunocomprometidos, foram seleccionados de forma aleatória para este estudo multilocus. PCR multiplex foi utilizada para a amplificação simultânea de três regiões genómicas: subunidade grande do rRNA mitocondrial, superóxido dismutase e dihidropteroato sintetase. Cinco polimorfismos de base única, previamente correlacionados com parâmetros da doença, foram genotipados por extensão de base única: mt85, SOD110, SOD215, DHPS165 e DHPS171. Um total de 330 polimorfismos de base única e 29 genótipos multilocus putativos de P. jirovecii foram identificados e caracterizados nos espécimes pulmonares analisados. Os padrões de distribuição dos polimorfismos foram analisados, sendo considerada a variação temporal e/ou geográfica das suas formas alélicas. Constatou-se grande diversidade genotípica entre os isolados de P. jirovecii que poderá ter influência a nível epidemiológico. Foram observadas associações estatísticas entre mt85/genótipos multilocus e parâmetros demográficos e clínicos. A correlação mais importante verificou-se entre mt85C e cargas parasitárias baixas a moderadas, enquanto mt85T foi associado com cargas parasitárias altas; MLG5, MLG9 e MLG13 foram associados com cargas parasitárias baixas, moderadas e altas, respectivamente. Tais associações demonstram que potenciais marcadores moleculares da infecção por P. jirovecii poderão existir e que polimorfismos/genótipos específicos poderão determinar perfis epidemiológicos da pneumonia por Pneumocystis. A análise genética cruzada permitiu verificar associações entre polimorfismos de base única. Os polimorfismos SOD110T e SOD215C, SOD110C e SOD215T, DHPS165A e DHPS171C, DHPS165G e DHPS171T foram associados estatisticamente. Os genótipos multilocus mais prevalentes foram considerados para o teste recombinatório d1. Dois genótipos multilocus (MLG7 e MLG9) foram observados com elevada frequência, e a análise genética indicou que estes se encontravam sobre-representados na população de P. jirovecii estudada. Estas evidências indicam que o fenómeno de desequilíbrio de ligação e a propagação clonal de subtipos genéticos é frequente, considerando que a espécie P. jirovecii poderá ser representada por uma população com estrutura epidémica. O presente trabalho confirmou a importância do estudo de polimorfismos em P. jirovecii, sugerindo que a caracterização multilocus poderá fornecer informação relevante para a compreensão dos padrões, causas e controlo da infecção, melhorando assim a investigação deste importante patogéneo.

Influence of the molecular weight in mechanical properties and degradation kinetics of chitosan inverted colloidal crystals

Tissue engineering arises from the need to regenerate organs and tissues, requiring the development of scaffolds, which can provide an optimum environment for tissue growth. In this work, chitosan with different molecular weights was used to develop biodegradable 3D inverted colloidal crystals (ICC) structures for bone regeneration, exhibiting uniform pore size and interconnected network. Moreover, in vitro tests were conducted by studying the influence of the molecular weight in the degradation kinetics and mechanical properties. The production of ICC included four major stages: fabrication of microspheres; assembly into a cohesive structure, polymeric solution infiltration and microsphere removal. Chitosan’s degree of deacetylation was determined by infrared spectroscopy and molecular weight was obtained via capillary viscometry. In order to understand the effect of the molecular weight in ICC structures, the mass loss and mechanical properties were analyzed after degradation with lysozyme. Structure morphology observation before and after degradation was performed by scanning electron microscopy. Cellular adhesion and proliferation tests were carried out to evaluate ICC in vitro response. Overall, medium molecular weight ICC revealed the best balance in terms of mechanical properties, degradation rate, morphology and biological behaviour.