A MOSFET-only wideband LNA exploiting thermal noise canceling and gain optimization

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

Embolização das artérias prostáticas no tratamento da hiperplasia benigna da próstata : estudo anátomo-clínico

Resumo: A hiperplasia benigna da próstata (HBP) tem elevada prevalência nos homens entre os 50 e 79 anos de idade, sendo ubiquitária com o envelhecimento. Devido à significativa morbi-mortalidade associada aos tratamentos médicos e cirúrgicos currentemente disponíveis, são necessárias novas tecnologias para melhorar os resultados e minimizar o desconforto dos doentes. Recentemente, estudos preliminares de experimentação animal e em 3 doentes tratados, sugeriram a embolização arterial prostática selectiva (EAPS) como hipótese terapêutica para a HBP. Decidimos investigar se a EAPS poderia ser um procedimento bem sucedido no tratamento da HBP gravemente sintomática. Para tal realizámos um estudo anátomo-radiológico e clínico em 63 doentes com recurso a uma terapêutica inovadora minimamente invasiva guiada pela imagem. Avaliámos 126 hemipélvis com recurso a Angio-RM, Angio-TC e Angiografia Digital de Subtracção, com o intuito de definir os padrões básicos de bifurcação das artérias ilíacas internas até agora apenas descritos em estudos cadavéricos. Estudámos ainda o suprimento vascular arterial prostático, identificando: 1 as artérias prostáticas; 2 origem e direcção; 3 os ramos intra-prostáticos; 4 anastomoses com outras artérias. Em relação aos resultados anatómicos, identificámos 181 artérias prostáticas, já que em 43.7% das hemipélvis existiam dois pedículos arteriais prostáticos com origens independentes. A origem mais frequente foi a artéria pudenda interna (39.7%), seguida do tronco comum glúteo-pudendo (21%) e da artéria vesical superior (18.2%). Origens menos frequentes foram a artéria obturadora (12.1%), as artérias glúteas inferior (3.9%)ou superior (1.7%), ramos rectais provenientes da artéria mesentérica inferior (1.7%) e a artéria pudenda acessória (1.7%). Identificaram-se anastomoses com as artérias adjacentes em 57.9% dos casos: com a terminação da artéria pudenda interna (41.6%),artérias prostáticas contra-laterais (18.2%) e homo-laterais (11.7%), com ramos rectais (15.6%) e com artérias vesicais (12.9%). Em relação ao estudo clínico tratámos 63 doentes (idades compreendidas entre 52 - 82 anos, média 69.5 anos) com HBP gravemente sintomática refractária à terapêutica médica há mais de 6 meses. Foi possível avaliação após o tratamento em 37 doentes: média de seguimento de 4.7 meses (variando entre 1 e 12 meses). A EAPS unilateral foi possível em todos os doentes, com embolização bilateral em 73% dos casos. A embolização bilateral não foi possível em 27% dos casos devido a tortuosidade, alterações ateroescleróticas e pequeno calibre das artérias ilíacas e/ou prostáticas. Em média houve uma melhoria do International Prostate Symptom Score (IPSS) de 10.8 pontos, da QoL de 1.5 pontos e do Internationl Index of Erectile Function (IIEF) de 2.1 pontos. Houve uma redução média do PSA de 30% (2.4 ng/mL), um aumento do pico de fluxo urinário (Qmax) de 3.1 - 3.85 mL/s e uma redução média do volume prostático de 21% (18.5 mL). Registou-se uma complicação major: pequena área de isquémia da parede vesical tratada cirurgicamente. Em 75% dos doentes tratados obteve-se sucesso clínico com franca melhoria dos sintomas, enquanto 25% dos doentes foram considerados insucesso clínico por se ter registado uma fraca ou ausente melhoria sintomática após a embolização. Os restantes doentes tratados estão sob controlo evolutivo, pararam toda a medicação prostática, sem qualquer caso de disfunção sexual associada com o tratamento. Este trabalho constitui o primeiro estudo anatómico descritivo in vivo das artérias prostáticas, conseguido devido à utilização de técnicas de imagem nunca usadas para este fim. O uso clínico dos dados anatómicos acima referidos permitiu a implementação de técnicas de Radiologia de Intervenção no tratatamento de uma doença de elevada prevalência. ------------------------------- ABSTRACT: Benign prostatic hyperplasia (BPH) has high prevalence in men aged 50–79 years being ubiquitous with aging. Due to significant morbi-mortality associated with currently available medical and surgical treatments, there is the need for innovative technologies to continue to improve outcomes and minimize patient discomfort and morbidity. Recently, prostatic arterial embolization (PAE) was suggested as a treatmentoption for BPH based on preliminary results from animal studies and 3 treated patients. We decided to investigate if PAE might be a successful treatment option for severely symptomatic BPH patients. We performed a clinical and anatomical-radiological study in 63 patients with the use of an inovative image-guided minimally invasive technique. We evaluated 126 pelvic sides using Angio-MR or Angio-CT and Catheter Angiography before embolisation to treat symptomatic BPH. We aimed to define the main branching patterns of the male internal iliac arteries, so far only studied in the cadaver. We also evaluated the prostatic arterial supply, identifying: 1 the prostatic arteries; 2 origin and direction; 3 intra-prostatic branches; 4 anastomoses with surrounding arteries. Regarding the anatomical study we identified 181 prostatic arteries, because in 43.7% of pelvic sides 2 separate prostatic vascular pedicles were found. The most frequent origin was the internal pudendal artery (39.7%) with the common glutealpudendal trunk (21%) and superior vesical arteries (18.2%) the next commonest. Less frequent origins were the obturator artery (12.1%), the inferior (3.9%) or superior (1.7%) gluteal arteries, rectal branches from the inferior mesenteric artery (1.7%) and the accessory pudendal artery (1.7%). There were anastomoses with the surrounding arteries in 57.9% of cases: termination of the internal pudendal artery (41.6%), contralateral prostatic arteries (18.2%), same-side prostatic arteries (11.7%), rectal branches (15.6%), and vesical arteries (12.9%).Regarding the clinical study, we treated 63 patients aged 52–82 years (mean 69.5 years) who presented with symptomatic BPH refractory to medical treatment for at least 6 months. Follow-up evaluation (mean 4.7 months, range 1-12 months) was possible in 37 patients. PAE was achieved in all patients with bilateral embolization in 73%. In 27% PAE was performed unilaterally due to tortuosity, atherosclerotic changes and small size of iliac and prostatic arteries. There was a mean decrease in the IPSS of 10.8 points, a mean improvement in QoL of 1.5 points, and a mean increase in the sexual function score of 2.1 points. There was a mean PSA reduction of 30% (2.4 ng/mL), a Qmax increase of 3.1 to 3.85 mL/sec, and a mean prostate volume decrease of 21% (18.5 mL). There was one major complication: a small area of bladder wall ischemia treated by surgery. Overall, 75% of patients were considered clinical success with major improvement after PAE, while 25% of patients were considered clinical failure with little or no improvement after PAE. All remaining patients are under follow-up, stopped all prostatic medication, and reported no sexual dysfunction. This study is the first one to describe the radiological anatomy of the prostatic arteries, with the use of imaging techniques never used for this purpose before. The clinical use of the anatomical findings allowed the implementation of Interventional Radiology tehniques in the treatment of a disease with a high prevalence.

The friction force mouse-pad and the forearm muscles efforts (preliminary results)

The objective of the article is to evaluate the impact of the friction force mouse-pad in the contraction level of the forearm muscles M. extensor carpi ulnaris, M. extensor digitorum and M. extensor carpi radialis longus. A standard protocol of mouse movements was performed involving horizontal, vertical and diagonal mouse displacements drag-and-drop type. The operators were instructed to execute the protocol with their normal working speed. The movements protocol were performed by each subject (n=17) with three selected pairs mouse-pad, classified as low, medium and high friction force pairs. The mean time to execute the protocol with each mouse was ~138s. Mean values of ~13%MVE and ~17%MVE were found in the M. extensor carpi ulnaris and in the M. extensor digitorum respectively when performing the movements’ protocol. A 8.1% increase in %MVE was observed in the M. extensor digitorum and a 9.4% increase in %MVE was observed in the M. extensor carpi ulnaris when the high friction force pair was operated, relatively to the low friction force pair (p<0.05). The main preliminary conclusions of this study is that operating a high friction force mouse-pad may increase the risk to symptoms or disorders in the wrist due to an increase in the forearm muscles contraction levels, particularly during work with drawing application

Desenvolvimento de um serviço local de Saúde Mental em Famalicão

RESUMO: O desenvolvimento de serviços locais adequados deve ser baseado numa avaliação sistemática das necessidades e resultados obtidos nos cuidados a uma população de indivíduos identificados como apresentando uma doença mental na área de referenciação do serviço. Neste sentido foram utilizados os seguintes métodos: dados epidemiológicos acerca das necessidades locais e taxas de utilização de serviços a nível nacional e local, este último com base no case-register. Os diagnósticos de maior prevalência em ambulatório são as perturbações de humor e as perturbações neuróticas de stress ou somatoformes, com uma preponderância de doenças mentais comuns (depressão e ansiedade) em serviços de psiquiatria. Constatam-se baixas taxas de abandono da consulta (12%). A idade, a doença e a escolaridade estão correlacionados com o risco de drop-out, mas utilizada a regressão logística, a idade e a escolaridade perdem o seu significado estatístico. Encontram-se taxas reduzidas de drop-out dos indivíduos com psicose ou perturbações bipolares, em virtude da intervenção activa da equipa. Os custos de transporte, a distância ao local de consulta e o tempo de espera para a primeira consulta são barreiras no acesso aos cuidados a nível local. Os cuidadores não se sentem apoiados pela rede de suporte social e queixam-se sobretudo da acessibilidade, mas exibem elevadas taxas de satisfação com os serviços prestados. Decidiu-se apostar numa organização do serviço baseada na comunidade, com intervenções baseadas na evidência, dando prioridade ao doente mental grave e à qualidade dos cuidados.----------- ABSTRACT: The development of appropriate local services should be based on a systematic assessment of the needs and outcomes of the population of individuals identified as mentally ill within the service’s catchment area. A number of methods may be used as proxies in assessing local needs for services, such as service utilization rates found nationally and locally, by case-register. The most prevalent diagnoses in ambulatory care are mood disorders and neurotic, stress and somatoform disorders, with a majority of common mental disorders (depression and anxiety) in psychiatric services. Low dropout rates (12%) are found in ambulatory care. Age, disease and education are correlated with the risk of drop-out, but after using logistic regression, age and education lose their statistical significance. Low drop-out rates are found in individuals with psychosis or bipolar disorders, because the active intervention from the team. The costs of transportation, distance and the waiting time for the first consultation are barriers in access of care locally. Carers do not feel supported by the network of social support and complain primarily of accessibility, but exhibit high levels of satisfaction with the services provided. It was decided to invest in a service organization based in the community with evidence-based interventions, giving priority to severe mental illness and quality of care.

Towards cryogenic liquid –vapor energy storage units for space applications

Dissertation to obtain the Doctoral degree in Physics Engineering

Design of future distribution grids

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Determinants of the Portuguese government bond yield spread

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Characterization of processed materials by electrical currents: development of equipment and applications

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Design and development of a microfluidic platform for use with colorimetric gold nanoprobe assays

Due to the importance and wide applications of the DNA analysis, there is a need to make genetic analysis more available and more affordable. As such, the aim of this PhD thesis is to optimize a colorimetric DNA biosensor based on gold nanoprobes developed in CEMOP by reducing its price and the needed volume of solution without compromising the device sensitivity and reliability, towards the point of care use. Firstly, the price of the biosensor was decreased by replacing the silicon photodetector by a low cost, solution processed TiO2 photodetector. To further reduce the photodetector price, a novel fabrication method was developed: a cost-effective inkjet printing technology that enabled to increase TiO2 surface area. Secondly, the DNA biosensor was optimized by means of microfluidics that offer advantages of miniaturization, much lower sample/reagents consumption, enhanced system performance and functionality by integrating different components. In the developed microfluidic platform, the optical path length was extended by detecting along the channel and the light was transmitted by optical fibres enabling to guide the light very close to the analysed solution. Microfluidic chip of high aspect ratio (~13), smooth and nearly vertical sidewalls was fabricated in PDMS using a SU-8 mould for patterning. The platform coupled to the gold nanoprobe assay enabled detection of Mycobacterium tuberculosis using 3 8l on DNA solution, i.e. 20 times less than in the previous state-of-the-art. Subsequently, the bio-microfluidic platform was optimized in terms of cost, electrical signal processing and sensitivity to colour variation, yielding 160% improvement of colorimetric AuNPs analysis. Planar microlenses were incorporated to converge light into the sample and then to the output fibre core increasing 6 times the signal-to-losses ratio. The optimized platform enabled detection of single nucleotide polymorphism related with obesity risk (FTO) using target DNA concentration below the limit of detection of the conventionally used microplate reader (i.e. 15 ng/μl) with 10 times lower solution volume (3 μl). The combination of the unique optical properties of gold nanoprobes with microfluidic platform resulted in sensitive and accurate sensor for single nucleotide polymorphism detection operating using small volumes of solutions and without the need for substrate functionalization or sophisticated instrumentation. Simultaneously, to enable on chip reagents mixing, a PDMS micromixer was developed and optimized for the highest efficiency, low pressure drop and short mixing length. The optimized device shows 80% of mixing efficiency at Re = 0.1 in 2.5 mm long mixer with the pressure drop of 6 Pa, satisfying requirements for the application in the microfluidic platform for DNA analysis.

Cellulose micro/nano fibers conformational effects probed by nematic liquid crystal droplets

Probing micro-/nano-sized surface conformations, which are ubiquitous in biological systems, by using liquid crystal droplets, which change their ordering and optical appearance in response to the presence of more than ten times smaller cellulose based micro/nano fibers, might find new uses in a range of biological environments and sensors. Previous studies indicate that electrospun micro/nano cellulosic fibers produced from liquid crystalline solutions could present a twisted form [1]. In this work, we study the structures of nematic liquid crystal droplets threaded by cellulose fibers prepared from liquid crystalline and isotropic solutions as well as droplets pierced by spider-made fibers [2]. Planar anchoring at the fibers and planar and homeotropic at the drop surfaces allowed probing cellulose fibers different helical structures as well as aligned filaments.

Desenvolvimento de um sensor colorimétrico em papel para a deteção de bactérias eletroquimicamente ativas

Bactérias eletroquimicamente ativas possuem a capacidade de transferir eletrões extracelularmente, durante a respiração celular. Esta característica tem sido atualmente explorada para aplicação na produção de eletricidade, tratamento de águas residuais, biorremediação e em diversas áreas da biotecnologia, onde a transferência eletrónica ocorre na presença de aceitadores insolúveis (tais como, óxidos metálicos e ânodos metálicos). Contudo, o número de espécies identificadas, isoladas e caracterizadas até à data é bastante reduzido. Os métodos atualmente disponíveis para deteção de bactérias eletroquimicamente ativas são morosos, dispendiosos e complexos de operar, tornando-se necessário o desenvolvimento de outros métodos mais rápidos, simples e menos dispendiosos que auxiliem na otimização das aplicações mencionadas. O objetivo principal deste trabalho foi o desenvolvimento de um sensor colorimétrico de papel utilizando um material eletrocrómico, trióxido de tungsténio, como camada ativa para a deteção destas bactérias. Para isso, foram definidos no papel poços delimitados por barreiras hidrofóbicas, através da impressão e difusão de uma camada de cera. As várias amostras de nanopartículas de WO3, sintetizadas por um método hidrotermal assistido por micro-ondas, foram depositadas nos poços por drop casting. As nanopartículas com estrutura cristalográfica hexagonal, impregnadas no sensor de papel, foram capazes de detetar com sucesso uma bactéria eletroquimicamente ativa, Geobacter sulfurreducens, desde uma fase de crescimento bastante inicial (Abs600 nm = 0,1, correspondente a 0,07 g/L com um rácio RGB de 1,10 ± 0,040) até à fase exponencial-tardia (Abs600 nm = 0,5, correspondente a 0,33 g/L com um rácio RGB de 1,33 ± 0,005), com P <0,0001. O sensor de papel e respetivo método de deteção colorimétrico desenvolvido neste trabalho, revelou ser sensível e específico à deteção destas bactérias, de uma forma rápida, simples e pouco dispendiosa.

Experimental and modeling studies on reverse electrodialysis for sustainable power generation

A potentially renewable and sustainable source of energy is the chemical energy associated with solvation of salts. Mixing of two aqueous streams with different saline concentrations is spontaneous and releases energy. The global theoretically obtainable power from salinity gradient energy due to World’s rivers discharge into the oceans has been estimated to be within the range of 1.4-2.6 TW. Reverse electrodialysis (RED) is one of the emerging, membrane-based, technologies for harvesting the salinity gradient energy. A common RED stack is composed by alternately-arranged cation- and anion-exchange membranes, stacked between two electrodes. The compartments between the membranes are alternately fed with concentrated (e.g., sea water) and dilute (e.g., river water) saline solutions. Migration of the respective counter-ions through the membranes leads to ionic current between the electrodes, where an appropriate redox pair converts the chemical salinity gradient energy into electrical energy. Given the importance of the need for new sources of energy for power generation, the present study aims at better understanding and solving current challenges, associated with the RED stack design, fluid dynamics, ionic mass transfer and long-term RED stack performance with natural saline solutions as feedwaters. Chronopotentiometry was used to determinate diffusion boundary layer (DBL) thickness from diffusion relaxation data and the flow entrance effects on mass transfer were found to avail a power generation increase in RED stacks. Increasing the linear flow velocity also leads to a decrease of DBL thickness but on the cost of a higher pressure drop. Pressure drop inside RED stacks was successfully simulated by the developed mathematical model, in which contribution of several pressure drops, that until now have not been considered, was included. The effect of each pressure drop on the RED stack performance was identified and rationalized and guidelines for planning and/or optimization of RED stacks were derived. The design of new profiled membranes, with a chevron corrugation structure, was proposed using computational fluid dynamics (CFD) modeling. The performance of the suggested corrugation geometry was compared with the already existing ones, as well as with the use of conductive and non-conductive spacers. According to the estimations, use of chevron structures grants the highest net power density values, at the best compromise between the mass transfer coefficient and the pressure drop values. Finally, long-term experiments with natural waters were performed, during which fouling was experienced. For the first time, 2D fluorescence spectroscopy was used to monitor RED stack performance, with a dedicated focus on following fouling on ion-exchange membrane surfaces. To extract relevant information from fluorescence spectra, parallel factor analysis (PARAFAC) was performed. Moreover, the information obtained was then used to predict net power density, stack electric resistance and pressure drop by multivariate statistical models based on projection to latent structures (PLS) modeling. The use in such models of 2D fluorescence data, containing hidden, but extractable by PARAFAC, information about fouling on membrane surfaces, considerably improved the models fitting to the experimental data.

Engineering of metal oxide nanoparticles for application in electrochemical devices

The growing demand for materials and devices with new functionalities led to the increased inter-est in the field of nanomaterials and nanotechnologies. Nanoparticles, not only present a reduced size as well as high reactivity, which allows the development of electronic and electrochemical devices with exclusive properties, when compared with thin films. This dissertation aims to explore the development of several nanostructured metal oxides by sol-vothermal synthesis and its application in different electrochemical devices. Within this broad theme, this study has a specific number of objectives: a) research of the influence of the synthesis parameters to the structure and morphology of the nanoparticles; b) improvement of the perfor-mance of the electrochromic devices with the application of the nanoparticles as electrode; c) application of the nanoparticles as probes to sensing devices; and d) production of solution-pro-cessed transistors with a nanostructured metal oxide semiconductor. Regarding the results, several conclusions can be exposed. Solvothermal synthesis shows to be a very versatile method to control the growth and morphology of the nanoparticles. The electrochromic device performance is influenced by the different structures and morphologies of WO3 nanoparticles, mainly due to the surface area and conductivity of the materials. The dep-osition of the electrochromic layer by inkjet printing allows the patterning of the electrodes without wasting material and without any additional steps. Nanostructured WO3 probes were produced by electrodeposition and drop casting and applied as pH sensor and biosensor, respectively. The good performance and sensitivity of the devices is explained by the high number of electrochemical reactions occurring at the surface of the na-noparticles. GIZO nanoparticles were deposited by spin coating and used in electrolyte-gated transistors, which promotes a good interface between the semiconductor and the dielectric. The produced transistors work at low potential and with improved ON-OFF current ratio, up to 6 orders of mag-nitude. To summarize, the low temperatures used in the production of the devices are compatible with flexible substrates and additionally, the low cost of the techniques involved can be adapted for disposable devices.

Dose de radiação e risco para a saúde em doentes com Linfoma não-Hodgkin submetidos a estudos de TC

RESUMO - A exposição a radiações ionizantes em tomografia computorizada (TC) pode constituir-se como um risco para a saúde dos utentes. A TC é utilizada no diagnóstico e follow-up de doentes com Linfoma não-Hodgkin, subtipo Linfoma Difuso das Grandes Células B (LDGCB). O objetivo deste estudo foi determinar a dose efetiva acumulada e o risco de segundas neoplasias nestes doentes, diagnosticados em 2011 no IPOLFG e seguidos na consulta de hematologia até 2013. Foram avaliados retrospetivamente 70 doentes com base nos registos de dose do “Patient Protocol” das TC efetuadas. Em média cada doente fez 12 TC e a dose efetiva acumulada foi de 64,76 mSv (percentil 75). Três doentes foram expostos a doses de radiação superiores 90 mSv e um atingiu 111,72 mSv. Os resultados demonstram ser necessário rever os parâmetros e protocolos de exames de TC: (i) TC crânio (DLP= 777 mGycm) e TC abdominal-pélvico (DLP= 628 mGycm). O aumento do número de exames de TC efetuados e a consequente dose parece corresponder a um aumento do risco de segundas neoplasias e risco de morte por doenças neoplásicas durante a vida destes doentes. Os resultados são aparentemente mais significativos para as mulheres, que apresentam o dobro do risco de cancro do pulmão e risco de mortalidade superior em 14% para todas as doenças neoplásicas. O elevado número de exames de TC realizados por cada doente contribui para o aumento da probabilidade de efeitos deletérios e também para o aumento dos níveis de dose efetiva coletiva na população em geral.