40 K Liquid Neon Energy Storage Unit

A thermal Energy Storage Unit (ESU) could be used to attenuate inherent temperature fluctuations of a cold finger, either from a cryocooler working or due to sudden income heat bursts. An ESU directly coupled to the cold source acts as a thermal buffer temporarily increasing its cooling capacity and providing a better thermal stability of the cold finger (“Power Booster mode”). The energy storage units presented here use an enthalpy reservoir based on the high latent heat of the liquid-vapour transition of neon in the temperature range 38 - 44 K to store up to 900 J, and that uses a 6 liters expansion volume at RT in order to work as a closed system. Experimental results in the power booster mode will be described: in this case, the liquid neon cell was directly coupled to the cold finger of the working cryocooler, its volume (12 cm3) allowing it to store 450 J at around 40 K. 10 W heat bursts were applied, leading to liquid evaporation, with quite reduced temperature changes. The liquid neon reservoir can also work as a temporary cold source to be used after stopping the cryocooler, allowing for a vibration-free environment. In this case the enthalpy reservoir implemented (24 cm3) was linked to the cryocooler cold finger through a gas gap heat switch for thermal coupling/decoupling of the cold finger. We will show that, by controlling the enthalpy reservoir’s pressure, 900 J can be stored at a constant temperature of 40 K as in a triple-point ESU.

40 K Neon liquid energy storage unit

Cryocoolers have been progressively replacing the use of the stored cryogens in cryogenic chains used for detector cooling, thanks to their higher and higher reliability. However, the mechanical vibrations, the electromagnetic interferences and the temperature fluctuations inherent to their functioning could reduce the sensor’s sensitivity. In order to minimize this problem, compact thermal energy storage units (ESU) are studied, devices able to store thermal energy without significant temperature increase. These devices can be used as a temporary cold source making it possible to turn the cryocooler OFF providing a proper environment for the sensor. A heat switch is responsible for the thermal decoupling of the ESU from the cryocooler’s temperature that increases when turned OFF. In this work, several prototypes working around 40 K were designed, built and characterized. They consist in a low temperature cell that contains the liquid neon connected to an expansion volume at room temperature for gas storage during the liquid evaporation phase. To turn this system insensitive to the gravity direction, the liquid is retained in the low temperature cell by capillary effect in a porous material. Thanks to pressure regulation of the liquid neon bath, 900 J were stored at 40K. The higher latent heat of the liquid and the inexistence of triple point transitions at 40 K turn the pressure control during the evaporation a versatile and compact alternative to an ESU working at the triple point transitions. A quite compact second prototype ESU directly connected to the cryocooler cold finger was tested as a temperature stabilizer. This device was able to stabilize the cryocooler temperature ((≈ 40K ±1 K) despite sudden heat bursts corresponding to twice the cooling power of the cryocooler. This thesis describes the construction of these devices as well as the tests performed. It is also shown that the thermal model developed to predict the thermal behaviour of these devices, implemented as a software,describes quite well the experimental results. Solutions to improve these devices are also proposed.

40 K neon liquid energy storage unit

Cryocoolers have been progressively replacing the use of the stored cryogens in cryogenic chains used for detector cooling, thanks to their higher and higher reliability. However, the mechanical vibrations, the electromagnetic interferences and the temperature fluctuations inherent to their functioning could reduce the sensor’s sensitivity. In order to minimize this problem, compact thermal energy storage units (ESU) are studied, devices able to store thermal energy without significant temperature increase. These devices can be used as a temporary cold source making it possible to turn the cryocooler OFF providing a proper environment for the sensor. A heat switch is responsible for the thermal decoupling of the ESU from the cryocooler’s temperature that increases when turned OFF. In this work, several prototypes working around 40 K were designed, built and characterized. They consist in a low temperature cell that contains the liquid neon connected to an expansion volume at room temperature for gas storage during the liquid evaporation phase. To turn this system insensitive to the gravity direction, the liquid is retained in the low temperature cell by capillary effect in a porous material. Thanks to pressure regulation of the liquid neon bath, 900 J were stored at 40K. The higher latent heat of the liquid and the inexistence of triple point transitions at 40 K turn the pressure control during the evaporation a versatile and compact alternative to an ESU working at the triple point transitions. A quite compact second prototype ESU directly connected to the cryocooler cold finger was tested as a temperature stabilizer. This device was able to stabilize the cryocooler temperature ((≈ 40K ±1 K) despite sudden heat bursts corresponding to twice the cooling power of the cryocooler. This thesis describes the construction of these devices as well as the tests performed. It is also shown that the thermal model developed to predict the thermal behaviour of these devices,implemented as a software, describes quite well the experimental results. Solutions to improve these devices are also proposed.

Matching CO2 large point sources and potential geological storage sites in mainland Portugal

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia do Ambiente, Perfil Gestão e Sistemas Ambientais

Les plus anciens mammifères terrestres du Miocène marin de Lisbonne - le gisement du Km 10

For the first time, small mammals were found at the earliest marine level in the northeastern part of the lower Tagus basin, to the NE of Lisbon. At this new locality, at the 10 kilometer of the Lisbon-Oporto A1-IP1 highway,conglomerates yielded, along with marine fossils, more or less abraded teeth and bones from insectivores,lagomorphs, rodents and small artiodactyls (sec Tableau 1). Age may he ascribed to the lower Miocene, MN 2b Neogene mammal unit (about 22 My), but an early MN 3 age cannot be entirely excluded. That corresponds to latest Aquitanian (or less probably earliest Burdigalian) (sec Tableau 2). This is the first hitherto found locality with small mammals of this age as far as Portugal is concerned, as well as the oldest locality so far known in the Tagus basin. Km 10 is somewhat older than the localities of Universidade Católica and Avenida do Uruguay in Lisbon (ANTUNES & MEIN, 1986). Hence we can rather accurately date the age of the first marine transgression in the northeastern part of the lower Tagus basin. This shows that in this region there are no marine equivalents of the "Venus ribeiroi beds" (Aquitanian,Division 1 of the Lisbon Miocene series). Correlation between this unit and the uppermost levels of the essentially paleogene "Complexo de Benfica" may be possible. Fossils at km 10 point out to shallow, coastal, highenergy marine environments. Sedimentological features are compatible with this model. Dry land and swamps with brackish (or ev en fresh) waters were present nearby. From those areas came remains of mammals, crocodylians, as well as oysters and charophytes that were later transported to the sea. Sea was warmer than the extant Atlantic at the same latitudes, even if conditions were not strictly tropical then. These conditions surely influenced climate in the nearby regions. Ecological data concerning mammalian faunas distinctly point out to nearby forest-rich environments, much more so than for Universidade Católica and Avenida do Uruguay localities, from where drier, even steppe environment forms largely prevail.

Le gisement de Asseiceira, Portugal (Miocène supérieur) Données complémentaires sur Freiria de Rio Maior

A new upper Miocene locality at Asseiceira (Rio Maior), near the top of the "Calcários de Almoster e Santarém" unit (Almoster and Santarém limestones) is studied. Animal and plant fossils are described. Comparisons are drawn to other localities related to the same unit: Freiria and Azambujeira (middle and upper levels, both with large mammals). Small mammals from Asseiceira and Freiria point out to a rather old age amidst the upper Vallesian, MN 10 mammal-unit. This gives a fairly accurate datation for the "Calcários de Almoster e Santarém" and for the short time span of the corresponding sedimentation. Climate was warm and quite dry, with contrasting seasons and arid events. During upper Vallesian times, climate in Iberian Peninsula was varied but drier than in France, and specially so in the inner basins. However in Portugal and in Catalonia climate would he less different in comparison with that of the Rhône basin. Environmental evolution has been important: at Freiria and Azambujeira (middle level) there were mainly shallow lacustrine environments that received ressurgence waters from the nearby "Maciço calcário". Humid areas were closely surrounded by dense forests and these by broader and drier savanna or steppe areas. Still later, carbonate sedimentation ended. For some time there was still a river system with oxbows; humid areas probably were decreasing in favour of surrounding, rather dry environments. This study stressed the nced for revision of the geology of the region of Rio Maior and for a new geological mapping of that area. Environmental evolution has been important: at Freiria and Azambujeira (middle level) there were mainly shallow lacustrine environments that received ressurgence waters from the nearby "Maciço calcário".

Spatial point pattern analysis of gorilla nest sites in the Kagwene Sanctuary, Cameroon: Towards understanding the nesting behavior of a critically endangered subspecies

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Aircraft Engines Maintenance Costs and Reliability: An Appraisal of the Decision Process to Remove an Engine for a Shop Visit Aiming at Minimum Maintenance Unit Cost

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação.

How effective are brief interventions in smoking cessation: project of a cohort study in a family health care unit

ABSTRACT: Tobacco use remains the most significant modifiable cause of disability, death and illness1. In Portugal, 19,6% of the population aged ten years or more smoke3. A Cochrane review of 20087 concluded that a brief advice intervention (compared to usual care) can increase the likelihood of a smoker to quit and remain nonsmoker 12 months later by a further 1 to 3 %. Several studies have shown that Primary Care Physicians can play a key role in these interventions8,9,10. However we did not find studies about the effectiveness of brief interventions in routine consultations of Family Doctors in Portugal. For this reason we designed a Cohort Study to make an exploratory study about the effectiveness of brief interventions of less than three minutes in comparison with usual care in routine consultations. The study will be implemented in a Family Healthcare Unit in Beja, during six months. Family Doctors of the intervention group should be submitted for an educational and training program before the study begin. Quit smoking sustained rates will be estimated one year after the first intervention in each smoker. If, as we expect, quit smoking rates will be higher in the intervention group than in the control group, this may change Portuguese Family Doctors attitudes and increase the provision of brief interventions in routine consultations in Primary Healthcare Centers.

Marketing plan for Snack Books

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Retaining MBAs, from employees' point of view

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Architettura Prefabbricata –L’obra Colombo a Lisbona Project Management’s Point of View

L'Edilizia Ingegneria Materiali Tecnologia

The impact of the measurement unit of unit price on consumer preference and choice

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Forest management in an urbanizing landscape

This paper aims at building a theoretical framework to examine the impact of development pressure on private owner’s forest management practices, namely, on regeneration and conversion cut dates. As the rent for developed land is rising over time, our model creates the possibility of switching from forestry to residential use at some point in the future, thus departing from the Faustmann’s traditional setup. Comparative statics results with respect to stumpage prices, regeneration costs and urban growth parameters are provided. The results obtained depend on the impact on the opportunity cost of holding the stand and the impact on the opportunity cost of holding the land, generalizing Faustmann’s unambiguous results.

Experimental high-throughput adsorption unit for multi-evaluation of adsorbents for gas capture, storage and separation applications

Dissertação para obtenção do grau de Mestre em Engenharia Química e Bioquímica