96 resultados para Terminal Design
Resumo:
Actualmente a indústria petroquímica é cada vez mais confrontada com a necessidade de poupança de custos. O presente trabalho surge dessa mesma necessidade e foi desenvolvido, no âmbito de um estágio curricular, no Complexo Petroquímico da Repsol, em Sines, durante um período de seis meses. O principal objectivo do estágio foi a optimização energética dos períodos diários de envio de etileno, dentro do complexo, bem como a avaliação energética dos sistemas de refrigeração, no terminal portuário, tendo-se utilizado o software Aspen HYSYS como simulador dos processos. Essa avaliação energética consistiu no cálculo dos coeficientes de performance e das eficiências dos vários compressores, tendo-se verificado que ambos os parâmetros encontram-se abaixo das condições de design para todos os processos, com a excepção do coeficiente de performance do sistema de refrigeração do 1,3-butadieno. Foram desenvolvidas ferramentas em excel que permitem a avaliação em tempo real da eficiência dos vários sistemas de refrigeração, que pode ser usada na sua optimização, ajustando as eficiências reais às de design. Foram estudados dois projectos a implementar no terminal portuário: um sobre a implementação de variadores de frequência nas liquefacções de etileno, que permitirá uma poupança de 62 kW-h/t de etileno recebida, e outro projecto sobre a instalação de um permutador refrigerado com água salgada, que seria colocado a jusante dos aero-arrefecedores, nas liquefacções. Este estudo permitiu concluir que no caso em que o aero-arrefecedor está desligado, poupar-se-ia em média 2,95 kW-h/t de etileno, e quando o aero-arrefecedor estiver em série com o permutador, poupar-se-ia em média 1,88 kW-h/t de etileno. No âmbito da avaliação energética, foram estimadas também as perdas energéticas nos vários compressores do terminal portuário, tendo-se constatado que os compressores do sistema de refrigeração do 1,3-butadieno apresentam maiores perdas por tonelada de produto recebido. No caso da optimização energética, verificou-se que os casos mais rentáveis eram o 3, 4 e o de estudo, sendo que estes permitiram poupanças na ordem dos 900000 €. Concluiu-se também que liquefazer no terminal é melhor das Segundas às Sextas, a partir de 2 t/h, enquanto que aos Sábado, é a partir de 3 t/h. Aos Domingos liquefazer no terminal compensa sempre, porque não há horas de ponta nem horas cheias.
Resumo:
The main objective of this work was to investigate the application of experimental design techniques for the identification of Michaelis-Menten kinetic parameters. More specifically, this study attempts to elucidate the relative advantages/disadvantages of employing complex experimental design techniques in relation to equidistant sampling when applied to different reactor operation modes. All studies were supported by simulation data of a generic enzymatic process that obeys to the Michaelis-Menten kinetic equation. Different aspects were investigated, such as the influence of the reactor operation mode (batch, fed-batch with pulse wise feeding and fed-batch with continuous feeding) and the experimental design optimality criteria on the effectiveness of kinetic parameters identification. The following experimental design optimality criteria were investigated: 1) minimization of the sum of the diagonal of the Fisher information matrix (FIM) inverse (A-criterion), 2) maximization of the determinant of the FIM (D-criterion), 3) maximization of the smallest eigenvalue of the FIM (E-criterion) and 4) minimization of the quotient between the largest and the smallest eigenvalue (modified E-criterion). The comparison and assessment of the different methodologies was made on the basis of the Cramér-Rao lower bounds (CRLB) error in respect to the parameters vmax and Km of the Michaelis-Menten kinetic equation. In what concerns the reactor operation mode, it was concluded that fed-batch (pulses) is better than batch operation for parameter identification. When the former operation mode is adopted, the vmax CRLB error is lowered by 18.6 % while the Km CRLB error is lowered by 26.4 % when compared to the batch operation mode. Regarding the optimality criteria, the best method was the A-criterion, with an average vmax CRLB of 6.34 % and 5.27 %, for batch and fed-batch (pulses), respectively, while presenting a Km’s CRLB of 25.1 % and 18.1 %, for batch and fed-batch (pulses), respectively. As a general conclusion of the present study, it can be stated that experimental design is justified if the starting parameters CRLB errors are inferior to 19.5 % (vmax) and 45% (Km), for batch processes, and inferior to 42 % and to 50% for fed-batch (pulses) process. Otherwise equidistant sampling is a more rational decision. This conclusion clearly supports that, for fed-batch operation, the use of experimental design is likely to largely improve the identification of Michaelis-Menten kinetic parameters.
Resumo:
A synthetic essay about portuguese Late Cretaceous (Upper Campanian-Maastrichtian) and Paleogene is presented. This does include most of the so far known data, a critical approach to the problems of such formations, and to previous works on them. Our viewpoints (party original) are exposed in a shorter text in French where most of the discussion was suppressed (see reference in Resumo).
Resumo:
The synthetic study of the uppermost Cretaceous of the Beira Litoral (fauna, flora) confirms its upper Campanian-Maastrichtian age. It shows the presence of a tropical to subtropical climate in an area constituted by a low coastal plain only occasionally linked to the sea, saturated with fresh water and possessing accordingly, a predominantely freshwater fauna (Viso, Aveiro); this plain changed towards the interior into a drier more forested zone with a more abundant terrestrial fauna which includes mammals (Taveiro). A thorough study of the chelonian Rosasia, abundant on the coastal plain, was made possible thanks to the discovery of a skull: it demonstrates that the genus belongs to the family Bothremydidae, revalided here. The composition of this family is presented, its phylogenetic and paleobiogeographic relation with the other pleurodires are analyzed, and its diagnosis established. The family is constituted of three groups; Rosasia belongs to one of these, the Bothremys group.
Resumo:
Flexible forms of work like project work are gaining importance in industry and services. Looking at the research on project work, the vast majority of present literature is on project management, but increasingly, problems concerning the quality of work and the efficiency of project teams become visible. The question now is how project work can be structured in order to simultaneously provide efficient and flexible work and healthy working conditions ensuring the development of human resources for a long time. Selected results of publicly funded research into project work will be presented based on case studies in 7 software development /IT consulting project teams (N=34). A set of different methods was applied: interviews with management/project managers, group interviews on work constraints, a monthly diary about well-being and critical incidences in the course of the project, and a final evaluation questionnaire on project outcomes focusing on economic and health aspects. Findings reveal that different types of projects exist with varying degree of team members’ autonomy and influence on work structuring. An effect of self-regulation on mental strain could not be found. The results emphasize, that contradicting requirements and insufficient organizational resources with respect to the work requirements lead to an increased work intensity or work obstruction. These contradicting requirements are identified as main drivers for generating stress. Finally, employees with high values on stress for more than 2 months have significantly higher exhaustion rates than those with only one month peaks. Structuring project work and taking into account the dynamics of project work, there is a need for an active role of the project team in contract negotiation or the detailed definition of work – this is not only a question of individual autonomy but of negotiation the range of option for work structuring. Therefore, along with the sequential definition of the (software) product, the working conditions need to be re-defined.
Resumo:
Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do Grau de Mestre em Engenharia Informática.
Resumo:
Este guião de apoio à formação tem como objectivo apoiar docentes em (1) aprender boas práticas no design de páginas web, (2) conhecer aspectos de versatilidade do moodle e (3) configurar o bloco "course menu".
Resumo:
The work agenda includes the production of a report on different doctoral programmes on “Technology Assessment” in Europe, the US and Japan, in order to analyse collaborative post-graduation activities. Finally, the proposals on collaborative post-graduation programme between FCTUNL and ITAS-FZK will be organised by an ongoing discussion process with colleagues from ITAS.
Resumo:
The reef levels of the gulf of Skoura belong to the reef formation of the Upper Miocene of the South-Rifan straits. A detailed analysis of the vertical distribution of various forms of colonies has led to the establishment of precise coral morphologies zonation. This palaeoecological approach leads us to distinguish between two environments in the Skoura gulf, probably corresponding to two reef episodes. The palaeogeographical implications (relationships between the Atlantic ocean and the Mediterranean sea) will be pointed out.
Resumo:
Dissertation submitted in partial fulfilment of the requirements for the Degree of Master of Science in Geospatial Technologies
Resumo:
Dissertação de Mestrado em Engenharia Informática
Resumo:
Tese de Mestrado em Engenharia Informática
Resumo:
Dissertação apresentada para obtenção do Grau de Doutor em Engenharia Electrotécnica e de Computadores pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia
Resumo:
Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia do Ambiente, perfil Gestão e Sistemas Ambientais
Resumo:
The participation of the Fraunhofer Institute for Manufacturing Engineering and Automation IPA (Stuttgart, Germany) and the companies User Interface Design GmbH (Ludwigsburg, Germany) plus MLR System GmbH (Ludwigsburg, Germany) enabled the research and findings presented in this paper; we would like to namely mention Birgit Graf and Theo Jacobs (Fraunhofer IPA) furthermore Peter Klein and Christiane Hartmann (User Interface Design GmbH).