Optimização da estrutura de um semi-reboque com vista à flexibilidade na sua adequação funcional

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Mecânica

Water treatments in semi-closed cooling circuits and their impact on the quality of effluents discharged by CERN

Dissertação apresentada à Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia do Ambiente, Gestão de Sistemas Ambientais

Development of biocompatible and “smart” porous structures using CO2-assisted processes

Dissertação apresentada para a obtenção do grau de Doutor em Engenharia Química, especialidade Engenharia da Reacção Química, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Water treatments in semi-closed cooling circuits and their impact on the quality of effluents discharged by CERN

Mestrado integrado em Engenharia do Ambiente, perfil: Gestão de Sistemas Ambientais

Células solares semi-transparentes de silício amorfo micro/nanocristalino

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia dos Materiais

Development of 2-oxazoline-based hydrogels and porous polyester microparticles in scCO2

Thesis submitted to Faculdade de Ciências e Tecnologia from Universidade Nova de Lisboa in partial fulfillment of the requirements for the obtention of the degree of Master of Science in Biotechnology

Sistemas de protecção sísmica semi-activos aplicados em estruturas de engenharia civil caso de estudo: amortecedores com fluído magneto-reológico

Dissertação para obtenção do Grau de Mestre em Engenharia Civil – Perfil Estruturas

O estudo de pavimentações regulares e semi-regulares com ambiente de geometria dinâmica

Dissertação para obtenção do Grau de Mestre em Ensino da Matemática

Preparation of gas-filled porous microparticles (GPPs) and microbubbles (MBs) by PGSS method

Dissertation to obtain the Master Degree in Biotechnology

The influence of burden of care and perceived stigma on expressed emotions of relatives of stable persons with schizophrenia in Nigerian semi-urban/urban settings

RESUMO: Schizophrenia’s burden defines experience of family members and is associated with high level of distress. Courtesy stigma, a distress concept, worsens caregivers’ burden of care and impacts on schizophrenia. Expressed emotion (EE), another family variable, impacts on schizophrenia. However, relationship between EE, burden of care and stigma has been little explored in western literature but not in sub-Saharan Africa particularly Nigeria. This study explored the impact of burden of care and courtesy stigma on EE among caregivers of persons with schizophrenia in urban and semi-urban settings in Nigeria. Fifty caregivers each from semi-urban and urban areas completed a socio-demographic schedule, family questionnaire, burden interview schedule and perceived devaluation and discrimination scale. The caregivers had a mean age of 42 (± 15.6) years. Majority were females (57%), married (49%), from Yoruba ethnic group (68%), monogamous family (73%) and Christians (82%). A higher proportion of the whole sample (53%) had tertiary education. Three out of ten were sole caregivers. Seventy three (73%) lived with the person they cared for. The average number of hours spent per week by a caregiver with a person with schizophrenia was 35 hours. The urban sample had significantly higher proportion of carers with high global expressed emotion (72.7%) than the semi-urban sample (27.3%). The odds of a caregiver in an urban setting exhibiting high expressed emotion are 4.202 times higher than the odds of caregiver in a semi-urban setting. Additionally, there was significance difference between the urban and semi-urban caregivers in discrimination dimension. High levels of subjective and objective burden were associated with high levels of critical comments. In conclusion, this study is the first demonstration of urban-semi-urban difference in expressed emotion in an African country and its findings provide further support to hypothesized relationship between components of EE and burden of care.

Comparative effects of sediments contaminated by carcinogenic and non-carcinogenic PAHs in Dicentrarchus labrax: a semi-quantitative histopathological approach

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente

Porous structures for the purification of biopharmaceuticals

This work aimed at the development of a (bio)polymeric monolithic support for biopharmaceuticals purification and/or capture. For that, it was assured that functional groups on its surface were ready to be involved in a plethora of chemical reactions for incorporation of the desired and most suitable ligand. Using cryogelation as preparation method a screening on multiple combinations of materials was performed in order to create a potentially efficient support with the minimal footprint, i.e. a monolithic support with reasonable mechanical properties, highly permeable, biocompatible, ready to use, with gravitational performance and minimal unspecific interactions towards the target molecules, but also biodegradable and produced from renewable materials. For the pre-selection all monoliths were characterized physico-chemically and morphologically; one agarose-based and two chitosan-based monoliths were then subjected to further characterizations before and after their modification with magnetic nanoparticles. These three specimens were finally tested towards adenovirus and the recovery reached 84% for the chitosan-GMA plain monolith prepared at -80°C. Monoliths based on chitosan and PVA were prepared in the presence and absence of magnetic particles, and tested for the isolation of GFP directly from crude cellular extracts. The affinity ligand A4C7 previously selected for GFP purification was synthesized on the monolith. The results indicated that the solid-phase synthesis of the ligand directly onto the monolith might require optimization and that the large pores of the monoliths are unsuitable for the purification of small proteins, such as GFP.

Uso da dessalinização no abastecimento de água para o consumo humano em regiões com climas áridos ou semi-áridos

O presente trabalho tem como principal objetivo desenvolver um processo de conceção preliminar tendo em vista o abastecimento de água potável à Cidade Assomada, na ilha de Santiago, Cabo Verde, a partir de uma nova estação dessalinizadora a ser instalado no Concelho de Calheta de São Miguel, na Ilha de Santiago. Este projeto terá uma vida útil de 25 anos prevendo-se que no horizonte do projeto venha a servir um total de cerca de 16 000 habitantes para um caudal de dimensionamento de 3156 m3/dia. O caudal de água de abastecimento será disponibilizado numa estação dessalinizadora em estudo que irá utilizar a técnica da osmose inversa e apresenta uma relação de custo-benefício ótima com baixo custo de investimento e de energia, para além de apresentar de fácil operação e manutenção. No presente trabalho é apresentado o estado da arte relativamente à dessalinização da água do mar, e é apresentado em detalhe todo o processo a ser implementado na estação que irá servir a Cidade de Assomada. Em complemento à estação dessalinizadora é igualmente apresentado o estudo do respectivo sistema adutor até à Cidade de Assomada, tendo em consideração critérios de natureza técnica e económica. O dimensionamento técnico-económico teve por objetivo a escolha do diâmetro mais económico a que corresponde o menor valor do somatório dos respetivos encargos de instalação e de exploração associados. Assim, e em resumo, o sistema de abastecimento à Cidade de Assomada será pois integrado por uma captação de água do mar através de dois furos instalados junto à costa, uma estação de tratamento de água, do tipo dessalinizadora um sistemas adutor com dois patamares de bombagem um reservatório de distribuição terminal, seguindo posteriormente a água de abastecimento diretamente para a nova rede de distribuição de toda a Cidade.

A semi-automatic approach to code smells detection

Eradication of code smells is often pointed out as a way to improve readability, extensibility and design in existing software. However, code smell detection remains time consuming and error-prone, partly due to the inherent subjectivity of the detection processes presently available. In view of mitigating the subjectivity problem, this dissertation presents a tool that automates a technique for the detection and assessment of code smells in Java source code, developed as an Eclipse plugin. The technique is based upon a Binary Logistic Regression model that uses complexity metrics as independent variables and is calibrated by expert‟s knowledge. An overview of the technique is provided, the tool is described and validated by an example case study.

Evaporation from porous building materials and its cooling potential

Evaporative cooling is a traditional strategy to improve summer comfort, which has gained renewed relevance in the context of the transition to a greener economy. Here, the potential for evaporative cooling of two common porous building materials, natural stone and ceramic brick, was evaluated. The work has relevance also to the protection of built heritage becauseevaporation underlies the problems of dampness and salt crystallization, which are so harmful and frequent in this heritage. It was observed that the drying rate of the materials is, in some cases, higher than the evaporation rate of a free water surface. Surface area measurements by a three-dimensional optical technique suggested, as probable cause of this behavior, that surface irregularity gives rise to a large effective surface of evaporation in the material. Surface temperature measurements by infrared were performed afterward during evaporation experiments outside during a hot summer day in Lisbon. Their results indicate that ordinary building materials can be very efficient evaporative media and, thus, may help in achieving higher energy efficiency while maintaining a simultaneous constructive or architectural function.