20 resultados para Local and Wide Area Network


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Thesis submitted in fulfilment of the requirements for the Degree of Master of Science in Computer Science

Relevância:

100.00% 100.00%

Publicador:

Resumo:

MARQUES, B.P. (2008) “Local Development Initiatives: the case of São Paulo and ABCD Municipalities”, in Actas do 14.º Congresso da APDR, Tomar, pp. 253-279, ISBN 978-972-98803-9-1.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

MARQUES, B.P. (2011) "Territorial Strategic Planning as a support instrument for Regional and Local Development: a comparative analysis between Lisbon and Barcelona Metropolitan Areas", in Atas do 17.º Congresso da APDR, do 5.º Congresso de Gestão e Conservação da Natureza e do Congresso Internacional da APDR/AECR, Bragança e Zamora, pp. 1265-1272, ISBN 978-989-96353-2-6.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Quadrature oscillators are key elements in modern radio frequency (RF) transceivers and very useful nowadays in wireless communications, since they can provide: low quadrature error, low phase-noise, and wide tuning range (useful to cover several bands). RC oscillators can be fully integrated without the need of external components (external high Q-inductors), optimizing area, cost, and power consumption. The conventional structure of ring oscillator offers poor frequency stability and phasenoise, low quality factor (Q), and besides being vulnerable to process, voltage and temperature (PVT) variations, its performance degrades as the frequency of operation increases. This thesis is devoted to quadrature oscillators and presents a detailed comparative study of ring oscillator and shift register (SR) approaches. It is shown that in SRs both phase-noise and phase error are reduced, while ring oscillators have the advantage of occupying less area and less consumption due to the reduced number of components in the circuit. Thus, although ring oscillators are more suitable for biomedical applications, SRs are more appropriate for wireless applications, especially when specification requirements are more stringent and demanding. The first architecture studied consists in a simple CMOS ring oscillator employing an odd number of static single-ended inverters as delay cells. Subsequently, the quadrature 4-stage ring oscillator concept is shown and post-layout simulations are presented. The 3 and 4-phase single-frequency local oscillator (LO) generators employing SRs are presented, the latter with 50% and 25% duty-cycles. The circuits operate at 600 MHz and 900 MHz, and were designed in a 130 nm standard CMOS technology with a voltage supply of 1.2 V.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Trabalho apresentado no âmbito do Mestrado em Engenharia Informática, como requisito parcial para obtenção do grau de Mestre em Engenharia Informática

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Trabalho apresentado no âmbito do Mestrado em Engenharia Informática, como requisito parcial para obtenção do grau de Mestre em Engenharia Informática.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertation presented to obtain a Ph.D. degree in Sciences of Engineering and Technology, Cell Technology, at the Instituto de Tecnologia Química e Biológica, Universidade Nova de Lisboa

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Trabalho de Projecto apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Metropolização, Planeamento Estratégico e Sustentabilidade.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e Computadores

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Due to the importance and wide applications of the DNA analysis, there is a need to make genetic analysis more available and more affordable. As such, the aim of this PhD thesis is to optimize a colorimetric DNA biosensor based on gold nanoprobes developed in CEMOP by reducing its price and the needed volume of solution without compromising the device sensitivity and reliability, towards the point of care use. Firstly, the price of the biosensor was decreased by replacing the silicon photodetector by a low cost, solution processed TiO2 photodetector. To further reduce the photodetector price, a novel fabrication method was developed: a cost-effective inkjet printing technology that enabled to increase TiO2 surface area. Secondly, the DNA biosensor was optimized by means of microfluidics that offer advantages of miniaturization, much lower sample/reagents consumption, enhanced system performance and functionality by integrating different components. In the developed microfluidic platform, the optical path length was extended by detecting along the channel and the light was transmitted by optical fibres enabling to guide the light very close to the analysed solution. Microfluidic chip of high aspect ratio (~13), smooth and nearly vertical sidewalls was fabricated in PDMS using a SU-8 mould for patterning. The platform coupled to the gold nanoprobe assay enabled detection of Mycobacterium tuberculosis using 3 8l on DNA solution, i.e. 20 times less than in the previous state-of-the-art. Subsequently, the bio-microfluidic platform was optimized in terms of cost, electrical signal processing and sensitivity to colour variation, yielding 160% improvement of colorimetric AuNPs analysis. Planar microlenses were incorporated to converge light into the sample and then to the output fibre core increasing 6 times the signal-to-losses ratio. The optimized platform enabled detection of single nucleotide polymorphism related with obesity risk (FTO) using target DNA concentration below the limit of detection of the conventionally used microplate reader (i.e. 15 ng/μl) with 10 times lower solution volume (3 μl). The combination of the unique optical properties of gold nanoprobes with microfluidic platform resulted in sensitive and accurate sensor for single nucleotide polymorphism detection operating using small volumes of solutions and without the need for substrate functionalization or sophisticated instrumentation. Simultaneously, to enable on chip reagents mixing, a PDMS micromixer was developed and optimized for the highest efficiency, low pressure drop and short mixing length. The optimized device shows 80% of mixing efficiency at Re = 0.1 in 2.5 mm long mixer with the pressure drop of 6 Pa, satisfying requirements for the application in the microfluidic platform for DNA analysis.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The Strait of Melaka is the longest strait in the world, stretching for about 800 km from the northern tip of Sumatra to Singapore. It exhibits a dual character like no other, being simultaneously a privileged linking passage of two seas and two knots of human civilization – India and China – and a »bottleneck« that constrains the maritime connections between them. Today, the latter aspect is globally dominant. The strait is considered and analysed mostly as an obstacle rather than a linking point: how to reach China from the West or elsewhere is no longer an issue, but securing the vital flows that pass into the strait on a daily basis undoubtedly is. Accidents, natural catastrophes, political local crises or terrorist attacks are permanent dangers that could cut this umbilical cord of world trade and jeopardize a particularly sensitive and vulnerable area; piracy and pollution are the most common local threats and vulnerabilities.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Today all kinds of innovations and research work is done by partnerships of competent entities each having some specialized skills. Like the development of the global economy, global innovation partnerships have grown considerably and form the basis of most of the sophisticated innovations today. To further streamline and simplify such cooperation, several innovation networks have been formed, both at local and global levels. This paper discusses the different types of innovations and how cooperation can benefit innovation in terms of pooling of resources and sharing of risks. One example of an open global co-innovation network promoted by Tata Consultancy Services, the TCS COIN is taken as a case. It enables venture capitalists, consultants, research agencies, companies and universities form nodes of the network so that each entity can play a meaningful role in the innovation network. Further, two innovation projects implemented using the COIN are discussed. Innovation Networks like these could form the basis of a unique global innovation network, which is not owned by any company and is used by innovation partners globally to collaborate and conduct research and development.