Conference on Enabling Teachers for Entrepreneurship Education

The Conference on Enabling Teachers for Entrepreneurship Education (ENTENP2013) in Initial Teacher Education (ITE) will be held at the Guarda Polytechnic Institute (GPI) in Guarda on 7/8 June 2013. We expect delegates from all the Portuguese Higher Education Institutions and the EU Member States, as well as Pre-Accession Countries and countries participating in the Competitiveness and Innovation Framework Programme (CIP). ENTENP 2013 addresses to all practitioners from the area of teacher education and entrepreneurship education, but also the early stage adopters of education in entrepreneurship. The conference is jointly organized by Guarda Polytechnic Institute with the collaboration of Castelo Branco Polytechnic Institute, Viana do Castelo Polytechnic Institute and Universidade Nova de Lisboa and shall be hosted by the European Commission and GPI. The purpose of the event is to discuss burning questions and exchange good practice examples in the field of enabling teachers for entrepreneurship education and looking at possible areas of development and cooperation.

An analysis of teachers' environmental concerns: use of a conceptual change model

Tese de doutoramento em Ciências da Educação

On the initial conditions in continuous-time fractional linear systems

Signal Processing, Vol. 83, nº 11

Competência intercultural: conteúdos culturais na aquisição da língua estrangeira e sua integração didáctica no ensino do alemão

Dissertação apresentada à Faculdade de Ciências Sociais e Humanas da Universidade Nova de Lisboa para obtenção do grau de Doutor em Cultura Alemã.

A new approach to the initial value problem

5th Portuguese Conference on Automatic Control, September, 5-7, 2002, Aveiro, Portugal

Interactive whiteboards in Portuguese primary schools: the teachers' view

Focusing on the use of Interactive Whiteboards (IWBs) in primary schools in Oeiras municipality, this article presents primary teachers’ views, from their experience, on the implementation of this innovation as a resource for the teaching and learning processes. IWBs have been recently launched in the framework of a major program aiming the technological modernization of Portuguese schools, in order to promote the use of ICT in teaching and learning, as well as in school management. Findings show that teachers are enthusiastic about Interactive White Boards because they really believe their pupils learn better and in a more joyful way. However, they draw attention to the need of training in order to fully exploit the potential of this resourc

A random access MAC protocol for MPR satellite networks

Dissertação apresentada para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Kids nature camp

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

The effectiveness of a teacher’s training workshop on Media Smart Program

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

High or low initial setting price?: Initial setting price as prediction of intention to bid in on line auctions

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Aplicação do CRM no contexto do bloco operatório

RESUMO - Introdução: Na última década, inúmera literatura sobre temas de saúde, principalmente abordando a Segurança do Doente, foca a necessidade e a importância do conceito de trabalho em equipa e da sua implementação na atividade dos profissionais de saúde. É também referido, como exemplo a seguir, por analogia e com a devida adaptação, o conceito e a metodologia do Crew Resource Management (CRM) da aviação civil, em que vários autores reviram a evidência da sua aplicação à medicina e concluíram que era uma ferramenta útil em formação não-técnica para a prática da cirurgia segura. Porquê esta analogia entre a saúde e a aviação civil? Porquê este despertar na saúde para o trabalho em equipa e, principalmente, baseando-se na metodologia do CRM da aviação civil? Qual a importância da formação não-técnica e como pode esta ser adaptada à atividade dos profissionais da saúde, nomeadamente no bloco operatório? São estas as principais questões que irão ser investigadas e analisadas ao longo deste estudo. Objetivos: Na aviação civil, a segurança é uma das prioridades desta indústria e um dos pilares da sua sustentabilidade. Sendo a indústria da aviação civil, como a saúde, uma atividade complexa importa em primeiro lugar compreender como a segurança deve ser abordada nas organizações complexas. Depois de compreendermos os quatro pilares da segurança (política, risco, garantia e promoção) aplicados na aviação civil, analisaremos a necessidade da formação não-técnica, explicando a importância da metodologia do CRM na aviação civil e a possibilidade da “importação” dos seus conceitos pela saúde. Metodologia: Para aferirmos a necessidade de formação não-técnica pelos profissionais da saúde foi desenvolvido um inquérito aos alunos finalistas dos Cursos de Enfermagem e dos Cursos de Medicina e outro inquérito a profissionais da saúde, Enfermeiros e Médicos (Anestesista e Cirurgião) com funções no Bloco Operatório, para responderem às seguintes inquietações:  Tiveram os profissionais de saúde formação formal na sua licenciatura ou pós-graduação em temas sobre comunicação, trabalho em equipa, gestão do erro, gestão do stress, liderança, atitudes e comportamentos para um trabalho em equipa eficiente e seguro?  Tiveram formação inicial no início da sua carreira e formação recorrente equivalente sobre estes temas ao longo da sua carreira?  Estão os profissionais de saúde preparados, com conhecimentos obtidos em formação formal, para trabalhar em equipa? Pretendeu-se igualmente, através de inquérito, saber se os alunos finalistas das licenciaturas acima identificadas consideram importante para a sua futura atividade como profissionais de saúde possuírem competências não-técnicas para o trabalho em equipa para evitarem os eventos adversos. No referido inquérito será também questionado quais as matérias a abordar nas licenciaturas (ou em outra etapa da formação), consideradas necessárias para se obterem competências de trabalho em equipa e qual a opinião sobre a frequência da formação recorrente sobre estes temas. Conclusão: O trabalho ficará concluído com uma proposta de conteúdos programáticos para a formação não-técnica dos profissionais de saúde, para a sua formação inicial e para a formação recorrente ao longo da carreira, baseada na metodologia do CRM da aviação civil. Objetivo final: Como objetivo final do estudo pretende-se contribuir, através da aplicação de formação não-técnicas aos profissionais de saúde, para a melhoria da Segurança do Doente nos cuidados em saúde.

Al-doped ZnO ceramic sputtering targets based on nanocrystalline powders produced by emulsion detonation synthesis – deposition and application as a transparent conductive oxide material

Transparent conducting oxides (TCOs) have been largely used in the optoelectronic industry due to their singular combination of low electrical resistivity and high optical transmittance. They are usually deposited by magnetron sputtering systems being applied in several devices, specifically thin film solar cells (TFSCs). Sputtering targets are crucial components of the sputtering process, with many of the sputtered films properties dependent on the targets characteristics. The present thesis focuses on the development of high quality conductive Al-doped ZnO (AZO) ceramic sputtering targets based on nanostructured powders produced by emulsion detonation synthesis method (EDSM), and their application as a TCO. In this sense, the influence of several processing parameters was investigated from the targets raw-materials synthesis to the application of sputtered films in optoelectronic devices. The optimized manufactured AZO targets present a final density above 99 % with controlled grain size, an homogeneous microstructure with a well dispersed ZnAl2O4 spinel phase, and electrical resistivities of ~4 × 10-4 Ωcm independently on the Al-doping level among 0.5 and 2.0 wt. % Al2O3. Sintering conditions proved to have a great influence on the properties of the targets and their performance as a sputtering target. It was demonstrated that both deposition process and final properties of the films are related with the targets characteristics, which in turn depends on the initial powder properties. In parallel, the influence of several deposition parameters in the film´s properties sputtered from these targets was investigated. The sputtered AZO TCOs showed electrical properties at room temperature that are superior to simple oxides and comparable to a reference TCO – indium tin oxide (ITO), namely low electrical resistivity of 5.45 × 10-4 Ωcm, high carrier mobility (29.4 cm2V-1s-1), and high charge carrier concentration (3.97 × 1020 cm-3), and also average transmittance in the visible region > 80 %. These superior properties allowed their successful application in different optoelectronic devices.

Assessing initial embodied energy in building structures using LCA methodology

The considerable amount of energy consumed on Earth is a major cause for not achieving sustainable development. Buildings are responsible for the highest worldwide energy consumption, nearly 40%. Strong efforts have been made in what concerns the reduction of buildings operational energy (heating, hot water, ventilation, electricity), since operational energy is so far the highest energy component in a building life cycle. However, as operational energy is being reduced the embodied energy increases. One of the building elements responsible for higher embodied energy consumption is the building structural system. Therefore, the present work is going to study part of embodied energy (initial embodied energy) in building structures using a life cycle assessment methodology, in order to contribute for a greater understanding of embodied energy in buildings structural systems. Initial embodied energy is estimated for a building structure by varying the span and the structural material type. The results are analysed and compared for different stages, and some conclusions are drawn. At the end of this work it was possible to conclude that the building span does not have considerable influence in embodied energy consumption of building structures. However, the structural material type has influence in the overall energetic performance. In fact, with this research it was possible that building structure that requires more initial embodied energy is the steel structure; then the glued laminated timber structure; and finally the concrete structure.

Frequency-domain receiver design for doubly-selective channels

This work is devoted to the broadband wireless transmission techniques, which are serious candidates to be implemented in future broadband wireless and cellular systems, aiming at providing high and reliable data transmission and concomitantly high mobility. In order to cope with doubly-selective channels, receiver structures based on OFDM and SC-FDE block transmission techniques, are proposed, which allow cost-effective implementations, using FFT-based signal processing. The first subject to be addressed is the impact of the number of multipath components, and the diversity order, on the asymptotic performance of OFDM and SC-FDE, in uncoded and for different channel coding schemes. The obtained results show that the number of relevant separable multipath components is a key element that influences the performance of OFDM and SC-FDE schemes. Then, the improved estimation and detection performance of OFDM-based broadcasting systems, is introduced employing SFN (Single Frequency Network) operation. An initial coarse channel is obtained with resort to low-power training sequences estimation, and an iterative receiver with joint detection and channel estimation is presented. The achieved results have shown very good performance, close to that with perfect channel estimation. The next topic is related to SFN systems, devoting special attention to time-distortion effects inherent to these networks. Typically, the SFN broadcast wireless systems employ OFDM schemes to cope with severely time-dispersive channels. However, frequency errors, due to CFO, compromises the orthogonality between subcarriers. As an alternative approach, the possibility of using SC-FDE schemes (characterized by reduced envelope fluctuations and higher robustness to carrier frequency errors) is evaluated, and a technique, employing joint CFO estimation and compensation over the severe time-distortion effects, is proposed. Finally, broadband mobile wireless systems, in which the relative motion between the transmitter and receiver induces Doppler shift which is different or each propagation path, is considered, depending on the angle of incidence of that path in relation to the direction of travel. This represents a severe impairment in wireless digital communications systems, since that multipath propagation combined with the Doppler effects, lead to drastic and unpredictable fluctuations of the envelope of the received signal, severely affecting the detection performance. The channel variations due this effect are very difficult to estimate and compensate. In this work we propose a set of SC-FDE iterative receivers implementing efficient estimation and tracking techniques. The performance results show that the proposed receivers have very good performance, even in the presence of significant Doppler spread between the different groups of multipath components.