The thickness of the transport layer in stratified geomorphic flows

River Flow 2010

A conceptual model for sheet-flow drawn from rapid granular flow theories

33rd IAHR Congress: Water Engineering for a Sustainable Environment

Development of molecularly imprinted polymers using supercritical fluid technology

Dissertação para obtenção do Grau de Doutor em Química Sustentável

Behavioral and synaptic circuit analysis in models of neuropsychiatric disorders: Dissecting the in vivo role of the postsynaptic density proteins nArgBP2 and Shank3 using genetic engineered mice

Dissertation presented to obtain the Ph.D degree in Biology

Evaluation of Spatial interpolation techniques for mapping climate variables with low sample density: a case study using a new gridded dataset of Bangladesh

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Validation of NASA rotor 67 with openFOAM's transonic density-based solver

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Two stage abe fermentation with in situ pervaporation and high cell density

Dissertation presented to Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa for obtaining the master degree in Membrane Engineering

Humoral response towards high density lipoprotein : a new mechanism for atherogenesis

RESUMO:Aterosclerose é uma das principais causas de morbilidade e mortalidade no mundo ocidental. É responsável, direta ou indiretamente, pela maior percentagem de gastos com a saúde na maioria dos países europeus. A “teoria lipídica” da aterosclerose, que se baseia na dislipidemia como causa primária para a doença vascular tem algumas implicações práticas importantes: permite a definição de linhas de orientação e protocolos simples e ainda estabelece alvos terapêuticos que podem ser atingidos na maior parte dos casos com a atual intervenção farmacológica. A associação da aterosclerose com o sistema imunológico (a “teoria imunológica”), forneceu por sua vez novas formas de explorar os mecanismos envolvidos e abriu novas perspetivas para um conhecimento mais completo da doença. No entanto, levanta dificuldades evidentes no que diz respeito às possibilidades terapêuticas. De todos os intervenientes no processo aterosclerótico (bioquímicos, imunológicos e anatómicos), as lipoproteínas de elevada densidade (HDL) são atualmente reconhecidas como um dos fatores mais importantes na aterogénese. Isto é baseado no reconhecimento das múltiplas propriedades anti-aterogénicas das HDL como por exemplo: a anti-oxidante, a anti-inflamatória e a antitrombótica, bem como o seu importante papel na melhoraria da função endotelial. Atualmente, é consensual que as funções anti-aterogénicas das HDL vão além do seu papel no transporte reverso do colesterol (RCT) e a importância das HDL no processo aterosclerótico baseia-se não apenas no seu papel protetor impedindo a formação da placa de ateroma, mas também na estabilização destas, prevenindo a sua ruptura e, consequentemente o evento trombótico. Como fundamentais no processo aterosclerótico estão reconhecidos dois principais conjuntos de eventos: um caracterizado por alterações no metabolismo das lipoproteínas que resultam em lipoproteínas pró-inflamatórias e pró-oxidantes que interagem com os componentes celulares da parede arterial e que conduzem à formação da placa de ateroma; o outro evento é a resposta imunológica desencadeada contra um novo conjunto de antigénios que por sua vez leva à produção de citoquinas pró-inflamatórias. Dada a complexidade da HDL e das suas múltiplas funções estas lipoproteínas tornaram-se um potencial alvo para a resposta auto-imune, e cujas consequências podem explicar algumas das associações identificados em estudos clínicos e epidemiológicos. Contudo esta interação entre o sistema imunológico e HDL nunca foi exaustivamente estudada. Portanto, pomos a hipótese de que em condições oxidativas e pró-inflamatórias, um aumento do antigénio (HDL) conduz a um consequente acréscimo na produção de anticorpos anti-HDL (aHDL) responsáveis pela alteração quantitativa e / ou qualitativa das HDL. O conceito de que estes anticorpos podem contribuir tanto para a evolução a longo prazo do processo aterosclerótico, como para o desencadeamento de eventos clínicos pode também explicar a heterogeneidade encontrada em cada doente e nos grandes estudos clínicos, no que diz respeito aos fatores de risco e outcomes clínicos. Para além disso, a confirmação desta hipótese pode permitir explicar porque é que as intervenções terapêuticas atualmente em desenvolvimento para aumentar os níveis de HDL, não conseguem mostrar a tão esperada redução do risco vascular. O objetivo geral desta tese foi identificar e caracterizar a resposta humoral contra os componentes da HDL, e avaliar possíveis mecanismos que possam contribuir para a modificação das propriedades anti-aterogénicas das HDL. Para alcançar este objetivo investigou-se: 1) A presença de anticorpos aHDL em doentes com lúpus eritematoso sistémico (SLE) e em doentes com manifestações clínicas de aterosclerose, como os doentes com doença arterial coronária (CAD), acidente vascular cerebral isquémico (IS) e diabetes tipo 2; 2) Os principais alvos antigénicos dentro do complexo das HDL e a associação entre os títulos de anticorpos aHDL e diferentes características clínicas destas doenças; 3) As modificações das funções normais associadas às HDL, em particular da função anti-oxidante e anti-inflamatória; 4) A atividade biológica dos anticorpos aHDL isolados do soro de doentes através de um conjunto de experiências in vitro de inibição da atividade da paraoxonase 1 (PON1) e da expressão de moléculas de adesão em culturas de células endoteliais. Para tal foi necessário estabelecer um método de isolamento dos anticorpos. Os anticorpos aHDL isolados do soro de doentes foram utilizados de forma a identificar as potenciais alterações dos sistemas celulares utilizados; 5) O efeito de fármacos usados no tratamento das dislipidemias, em particular o ácido nicotínico e as estatinas, na variação dos títulos de anticorpos aHDL através de ensaios clínicos randomizados, controlados com placebo e em dupla ocultação. Os métodos utilizados neste trabalho incluíram: técnicas imunológicas (como por exemplo, enzyme-linked immunoabsorbent assay - ELISA, ensaio imunoturbidimetrico e cromatografia de imuno-afinidade) técnicas bioquímicas (tais como a quantificação de atividade enzimática por espectrofotometria e por luminescência), experiências com cultura de células e citometria de fluxo. Os nossos resultados mostram que: 1) A presença de anticorpos aHDL, e mais especificamente anticorpos contra alguns do seus principais componentes como a apolipoproteína A-I (ApoA-I, principal apolipoproteína presente nas HDL) e a PON1 (o enzima que mais contribui para a propriedade anti-oxidante das HDL), quer em doentes com doenças auto-imunes, como o SLE, quer em doentes com manifestações clínicas de aterosclerose, como CAD, IS e diabetes tipo 2. Os doentes apresentaram títulos de anticorpos IgG aHDL, aApoA-I e aPON1 significativamente mais elevados do que controlos saudáveis com a mesma idade e sexo. 2) A correlação positiva estatisticamente significativa entre os títulos de aHDL e aApoA-I e aPON1 sugere que estes sejam dois dos principais alvos antigénicos dentro do complexo das HDL. Os anticorpos encontrados nestes doentes estão associados com a diminuição da atividade da PON1 e a uma redução da capacidade anti-oxidante total (TAC) do soro, um aumento dos biomarcadores de disfunção endotelial (como por exemplo dos metabolitos do óxido nítrico - NO2- e NO3-, as moléculas de adesão vascular e intracelular - VCAM-1 e ICAM-1 e os níveis de 3-nitrotirosina). Nos doentes com SLE os títulos destes estão associados a um aumento do dano cardiovascular e à atividade global da doença avaliados pelas escalas SLICC/ACR DI e BILAG score, respetivamente. Enquanto que nos doentes com diabetes tipo 2 estes anticorpos estão associados com um aumento dos níveis de glicemia em jejum (FGP) e hemoglobina glicada (HbA1c). 3) Após se ter estabelecido um método de isolamento dos anticorpos que permite isolar quantidades significativas de anticorpos do soro de doentes sem perder a sua especificidade, foi identificada a capacidade dos anticorpos isolados do soro de doentes inibirem de uma forma dependente da concentração a atividade da PON1 até um máximo de 70% no caso dos doentes com SLE e ente 7-52% no caso dos anticorpos isolados de doentes com CAD e IS. 4) O efeito anti-inflamatório das HDL na inibição da produção de VCAM-1 induzida por citoquinas (como o TNF-) foi revertido em mais de 80% pelos anticorpos aHDL isolados do soro de doentes. 5) A angiogenesis induzida por HDL através do aumento do fator de crescimento do endotélio vascular (VEGF) foi anulada em 65% pelos anticorpos aHDL isolados do soro de doentes. 6) Os atuais agentes farmacológicos disponíveis para aumentar as concentrações de HDL-C estão associados a um aumento dos títulos de anticorpos.-------- ABSTRACTAtherosclerosis is the major cause of morbidity and mortality in the western world. It is also responsible, directly or indirectly, for the highest percentage of health costs in most European countries. Despite the use of new technologies for the diagnosis of vascular disease and regardless of the major advances in treatment, the atherosclerosis-related clinical burden is still raising. The “lipid theory” of atherogenesis, which identifies dyslipidemia as the primary cause of this vascular disease has some important practical implications: it allows the definition of simple guidelines and establishes therapeutic targets which can be generally met with current pharmacologic intervention. The association between atherosclerosis an the immune system (the immune concept) has in turn provided new ways of exploring the mechanisms involved in this condition and has opened new perspectives in the understanding of the disease. However, it raises obvious difficulties when it comes to treatment options. Of all the players (biochemical, immunological and anatomical) involved in this matter, high-density lipoproteins (HDL) are currently recognised as one of the most important factors in atherogenesis. This is based on the recognition of HDL's multiple anti-atherogenic properties: anti-oxidant, anti-inflammatory and antithrombotic, as well as its capacity to improve endothelial function. Nowadays, it is widely recognized that the anti-atherogenic functions of HDL go beyond reverse cholesterol transport (RCT), and the importance of HDL is based not just on its ability to reduce atheroma formation but also on its ability to stabilise plaques, therefore preventing their rupture and ultimately thrombosis. Two main set of events have been recognised as fundamental in atherogenesis: one, characterized by lipoprotein metabolism alterations, resulting in pro-inflammatory and pro-oxidative lipoproteins, which interact with the normal cellular elements of the arterial wall leading to atheroma formation; the other, the immune cellular response towards new sets of antigens which lead to the production of pro-inflammatory cytokines. Given to HDL complexity and multiple functions this lipoprotein has became a potential target for an auto-immune response, the consequences of which may explain some of the association identified in epidemiological and clinical studies, though the interaction between the immune system and HDL has never been thoroughly addressed. Therefore, we hypothesized that under oxidative and pro-inflammatory conditions, the increase in the antigen (HDL) would lead to a consequent increase in the production of anti-HDL (aHDL) antibodies be responsible for quantitative and/or qualitative changes of HDL. The concept that these antibodies may contribute either to the long-term evolution of atherosclerosis or to the triggering of clinical events may also explain the heterogeneity found in individual patients and in large cohorts regarding risk factors and clinical outcomes. Moreover this may be a major breakthrough in understanding why therapeutic interventions that increase HDL levels, failed to show the anticipated reduction in vascular risk. The overall aims of this thesis were to identified and characterize the humoral response towards HDL components and to evaluate the possible mechanisms that may contribute to the modifications of the anti-atherogenic properties of HDL. To achieve this objective we investigated: 1) the presence of aHDL antibodies in patients with systemic lupus erythematosus (SLE) and in patients with atherosclerosis-related clinical events, such as coronary artery disease (CAD), ischemic stroke (IS) and type 2 diabetes; 2) the association between the titres of aHDL antibodies and different clinical features of these diseases; 3) the modifications of the anti-atherogenic properties of HDL; 4) the biologic effect of aHDL antibodies isolated from serum of patients on the anti-oxidant and anti-inflammatory properties of HDL; 5) the effect of different pharmacologic treatments for dyslipidemia on the prevalence and activity of aHDL antibodies. The methodologies used in this work included immunologic-related techniques (e.g. enzyme-linked immunoabsorbent assay – ELISA, immunoturbidimetric immunoassay and immunoaffinity chromatography), biochemical techniques (enzymatic assays with quantification by spectrophotometry and luminescence methods), cell culture experiments and flow cytometry. Our results indicate that: 1) The titres of IgG aHDL, anti-apolipoprotein A-I (aApoA-I) and anti-paraoxonase 1 (aPON1) antibodies were higher in patients with SLE, CAD, IS and type 2 diabetes when compared with age and sex matched healthy controls. 2) The antibodies found in these patients were associated with decreased PON1 activity, (the enzyme responsible for most of the anti-oxidant effect of HDL), reduced total anti-oxidant capacity (TAC) of serum and increased biomarkers of endothelial dysfunction (nitric oxide metabolites, adhesion molecules, nitrotyrosine). In patients with SLE the antibody titres were associated with an increase in disease-related cardiovascular damage and activity whereas in patients with type 2 diabetes they were directly related with the fasting glucose plasma (FGP) levels and the glycosylated haemoglobin (HbA1c). 3) The antibodies isolated from serum of our patients, directly inhibited HDL-associated PON1 activity in a dose dependent way ranging from 7 to 52%. 4) The anti-inflammatory effect of HDL, measured by the percentage of inhibition of the cytokine-induced production of vascular adhesion molecules (VCAM-1), was reduced in more than 80% by aHDL antibodies isolated from our patients. 5) The HDL-induced angiogenesis by increasing vascular endothelial growth factor (VEGF) levels was abrogated in 65% by the antibodies isolated from serum of patients. 6) The current available pharmacologic agents for increasing HDL-C concentrations were associated with an increase in the titres of IgG aApoA-I antibodies. This increase was higher in the extended release niacin when compared to statins probably due to their dampening effect on oxidative stress. In conclusion, aHDL antibodies are present in different pathologic conditions. aHDL antibodies represent a family of self-reacting immunoglobulins, of which ApoA-I and PON1 might be the most relevant targets. These antibodies are biologically active, interfering with the HDL anti-oxidant and anti-inflammatory properties and, consequently, with the atherosclerotic process. The pathogenic potential of these antibodies may lead to the identification of a new biomarker for vascular disease, whilst presenting itself as a novel target for a different treatment approach which may redefine the treatment strategies and clinical trials design for HDL interventions in the future.

Hole cleaning performance monitoring during the drilling of directional wells

During drilling operation, cuttings are produced downhole and must be removed to avoid issues which can lead to Non Productive Time (NPT). Most of stuck pipe and then Bottom-Hole Assembly (BHA) lost events are hole cleaned related. There are many parameters which help determine hole cleaning conditions, but a proper selection of the key parameters will facilitate monitoring hole cleaning conditions and interventions. The aim of Hole Cleaning Monitoring is to keep track of borehole conditions including hole cleaning efficiency and wellbore stability issues during drilling operations. Adequate hole cleaning is the one of the main concerns in the underbalanced drilling operations especially for directional and horizontal wells. This dissertation addresses some hole cleaning fundamentals which will act as the basis for recommendation practice during drilling operations. Understand how parameters such as Flowrate, Rotation per Minute (RPM), Rate of Penetration (ROP) and Mud Weight are useful to improve the hole cleaning performance and how Equivalent Circulate Density (ECD), Torque & Drag (T&D) and Cuttings Volumes coming from downhole help to indicate how clean and stable the well is. For case study, hole cleaning performance or cuttings volume removal monitoring, will be based on real-time measurements of the cuttings volume removal from downhole at certain time, taking into account Flowrate, RPM, ROP and Drilling fluid or Mud properties, and then will be plotted and compared to the volume being drilled expected. ECD monitoring will dictate hole stability conditions and T&D and Cuttings Volume coming from downhole monitoring will dictate how clean the well is. T&D Modeling Software provide theoretical calculated T&D trends which will be plotted and compared to the real-time measurements. It will use the measured hookloads to perform a back-calculation of friction factors along the wellbore.

Molecular simulation of gas adsorption equilibria in nanoporous materials

This work is divided into two distinct parts. The first part consists of the study of the metal organic framework UiO-66Zr, where the aim was to determine the force field that best describes the adsorption equilibrium properties of two different gases, methane and carbon dioxide. The other part of the work focuses on the study of the single wall carbon nanotube topology for ethane adsorption; the aim was to simplify as much as possible the solid-fluid force field model to increase the computational efficiency of the Monte Carlo simulations. The choice of both adsorbents relies on their potential use in adsorption processes, such as the capture and storage of carbon dioxide, natural gas storage, separation of components of biogas, and olefin/paraffin separations. The adsorption studies on the two porous materials were performed by molecular simulation using the grand canonical Monte Carlo (μ,V,T) method, over the temperature range of 298-343 K and pressure range 0.06-70 bar. The calibration curves of pressure and density as a function of chemical potential and temperature for the three adsorbates under study, were obtained Monte Carlo simulation in the canonical ensemble (N,V,T); polynomial fit and interpolation of the obtained data allowed to determine the pressure and gas density at any chemical potential. The adsorption equilibria of methane and carbon dioxide in UiO-66Zr were simulated and compared with the experimental data obtained by Jasmina H. Cavka et al. The results show that the best force field for both gases is a chargeless united-atom force field based on the TraPPE model. Using this validated force field it was possible to estimate the isosteric heats of adsorption and the Henry constants. In the Grand-Canonical Monte Carlo simulations of carbon nanotubes, we conclude that the fastest type of run is obtained with a force field that approximates the nanotube as a smooth cylinder; this approximation gives execution times that are 1.6 times faster than the typical atomistic runs.

Experimental and modeling studies on reverse electrodialysis for sustainable power generation

A potentially renewable and sustainable source of energy is the chemical energy associated with solvation of salts. Mixing of two aqueous streams with different saline concentrations is spontaneous and releases energy. The global theoretically obtainable power from salinity gradient energy due to World’s rivers discharge into the oceans has been estimated to be within the range of 1.4-2.6 TW. Reverse electrodialysis (RED) is one of the emerging, membrane-based, technologies for harvesting the salinity gradient energy. A common RED stack is composed by alternately-arranged cation- and anion-exchange membranes, stacked between two electrodes. The compartments between the membranes are alternately fed with concentrated (e.g., sea water) and dilute (e.g., river water) saline solutions. Migration of the respective counter-ions through the membranes leads to ionic current between the electrodes, where an appropriate redox pair converts the chemical salinity gradient energy into electrical energy. Given the importance of the need for new sources of energy for power generation, the present study aims at better understanding and solving current challenges, associated with the RED stack design, fluid dynamics, ionic mass transfer and long-term RED stack performance with natural saline solutions as feedwaters. Chronopotentiometry was used to determinate diffusion boundary layer (DBL) thickness from diffusion relaxation data and the flow entrance effects on mass transfer were found to avail a power generation increase in RED stacks. Increasing the linear flow velocity also leads to a decrease of DBL thickness but on the cost of a higher pressure drop. Pressure drop inside RED stacks was successfully simulated by the developed mathematical model, in which contribution of several pressure drops, that until now have not been considered, was included. The effect of each pressure drop on the RED stack performance was identified and rationalized and guidelines for planning and/or optimization of RED stacks were derived. The design of new profiled membranes, with a chevron corrugation structure, was proposed using computational fluid dynamics (CFD) modeling. The performance of the suggested corrugation geometry was compared with the already existing ones, as well as with the use of conductive and non-conductive spacers. According to the estimations, use of chevron structures grants the highest net power density values, at the best compromise between the mass transfer coefficient and the pressure drop values. Finally, long-term experiments with natural waters were performed, during which fouling was experienced. For the first time, 2D fluorescence spectroscopy was used to monitor RED stack performance, with a dedicated focus on following fouling on ion-exchange membrane surfaces. To extract relevant information from fluorescence spectra, parallel factor analysis (PARAFAC) was performed. Moreover, the information obtained was then used to predict net power density, stack electric resistance and pressure drop by multivariate statistical models based on projection to latent structures (PLS) modeling. The use in such models of 2D fluorescence data, containing hidden, but extractable by PARAFAC, information about fouling on membrane surfaces, considerably improved the models fitting to the experimental data.

Design and characterization of novel biopolymeric structure using biocompatible ionic liquids

The main objective of this thesis was the development of polymeric structures from the dissolution of FucoPol, a bacterial exopolysaccharide (EPS), in a biocompatible ionic liquid, choline acetate. The FucoPol was produced by the bacteria Enterobacter A47 using glycerol as carbon source at controlled temperature and pH (30ºC and 7, respectively). At the end of 3 days it was produced 7 g/L of FucoPol. The net yield of Fucopol in glycerol (YP/S) was 0.22 g/g and the maximum productivity 2.37 g/L.d This polymer was characterized about its composition in sugars and acyl groups (by High-Performance Liquid Chromatography - HPLC), containing fucose (35 % mol), galactose (21 % mol), glucose (29 % mol), rhamnose (3% mol) and glucuronic acid (12% mol) as well as acetate (14.28 % mol), pyruvate (2.15 % mol) and succinate (1.80 % mol). Its content of water and ash was 15% p/p and 2% p/p, respectively, and the chemical bonds (determined by Infrared Spectroscopy - FT-IR) are consistent to the literature reports. However, due to limitations in Differential Scanning Calorimetry (DSC) equipment it was not possible to determine the glass transition temperature. In turn, the ionic liquid showed the typical behavior of a Newtonian fluid, glass transition temperature (determined by DSC) -98.03ºC and density 1.1031 g/cm3. The study of chemical bonds by FT-IR showed that amount of water (8.80%) influenced the visualization of the bands predicted to in view of their chemical structure. After the dissolution of the FucoPol in the ionic liquid at different temperatures (50, 60, 80 and 100 ° C) it was promoted the removal of this by the phase inversion method using deionized water as a solvent, followed by drying in an oven at 70 ° C. The mixtures before and after the phase inversion method were characterized through the studies mentioned above. In order to explore possible application field’s biocompatibility assays and collage on balsa wood tests were performed. It was found that the process of washing with water by the phase inversion method was not totally effective in removing the biocompatible ionic liquid, since all FucoPol – IL mixtures still contained ionic liquid in their composition as can be seen by the DSC results and FT-IR. In addition, washing the mixtures with water significantly altered the composition of FucoPol. However, these mixtures, that developed a viscous behavior typical of a non-Newtonian fluid (shear-thinning), have the potential to be applied in the biomedical field as well as biological glues.

Valorization of olive pomace through combination of biocatalysis with supercritical fluid technology

A supercritical carbon dioxide (scCO2) based oil extraction method was implemented on olive pomace (alperujo), and an oil yield of 25,5 +/- 0,8% (goil/gdry residue) was obtained. By Soxhlet extraction with hexane, an oil extraction yield of 28,9 +/- 0,8 % was obtained, which corresponds to an efficiency of 88,4 +/- 4,8 % for the supercritical method. The scCO2 extraction process was optimized for operating conditions of 50 MPa and 348,15 K, for which an oil loading of 32,60 g oil/kg CO2 was calculated. As a proof of concept, olive pomace was used as feedstock for biodiesel production, in a process combining the use of lipase as a catalyst with the use of scCO2 as a solvent, and integrating the steps of oil extraction, oil to biodiesel transesterification and subsequent separation of the latter. In the conducted experiments, FAME (fatty acid methyl ester) purities of 90% were obtained, with the following operating parameters: an oil:methanol molar ratio of 1:24; a residence time of 7,33 and 11,6 mins; a pressure of 40 MPa; a temperature of 313,15 K; and Lipozyme (Mucor miehei; Sigma-Aldritch) as an enzyme. However, oscillations of FAME purity were registered throughout the experiments, which could possibly be due to methanol accumulation in the enzymatic reactor. Finally, the phenolic content of olive pomace, and the effect of the drying process – oven or freeze-drying – and the extraction methods – hydro-alcoholic method and supercritical method – on the phenolic content were analysed. It was verified that the oven-drying process on the olive pomace preserved 90,1 +/- 3,6 % of the total phenolic content. About 62,3 +/- 5,53% of the oven-dried pomace phenolic content was extracted using scCO2 at 60 MPa and 323,15 K. Seven individual phenols – hydroxytyrosol, tyrosol, oleuropein, quercetin, caffeic acid, ferulic acid and p-coumaric acid – were identified and quantified by HPLC.

Engineering bio-based polymers using alternative solvents and processes

The work presented in this thesis explores novel routes for the processing of bio-based polymers, developing a sustainable approach based on the use of alternative solvents such as supercritical carbon dioxide (scCO2), ionic liquids (ILs) and deep eutectic solvents (DES). The feasibility to produce polymeric foams via supercritical fluid (SCF) foaming, combined with these solvents was assessed, in order to replace conventional foaming techniques that use toxic and harmful solvents. A polymer processing methodology is presented, based on SCF foaming and using scCO2 as a foaming agent. The SCF foaming of different starch based polymeric blends was performed, namely starch/poly(lactic acid) (SPLA) and starch/poly(ε-caprolactone) (SPCL). The foaming process is based on the fact that CO2 molecules can dissolve in the polymer, changing their mechanical properties and after suitable depressurization, are able to create a foamed (porous) material. In these polymer blends, CO2 presents limited solubility and in order to enhance the foaming effect, two different imidazolium based ILs (IBILs) were combined with this process, by doping the blends with IL. The use of ILs proved useful and improved the foaming effect in these starch-based polymer blends. Infrared spectroscopy (FTIR-ATR) proved the existence of interactions between the polymer blend SPLA and ILs, which in turn diminish the forces that hold the polymeric structure. This is directly related with the ability of ILs to dissolve more CO2. This is also clear from the sorption experiments results, where the obtained apparent sorption coefficients in presence of IL are higher compared to the ones of the blend SPLA without IL. The doping of SPCL with ILs was also performed. The foaming of the blend was achieved and resulted in porous materials with conductivity values close to the ones of pure ILs. This can open doors to applications as self-supported conductive materials. A different type of solvents were also used in the previously presented processing method. If different applications of the bio-based polymers are envisaged, replacing ILs must be considered, especially due to the poor sustainability of some ILs and the fact that there is not a well-established toxicity profile. In this work natural DES – NADES – were the solvents of choice. They present some advantages relatively to ILs since they are easy to produce, cheaper, biodegradable and often biocompatible, mainly due to the fact that they are composed of primary metabolites such as sugars, carboxylic acids and amino-acids. NADES were prepared and their physicochemical properties were assessed, namely the thermal behavior, conductivity, density, viscosity and polarity. With this study, it became clear that these properties can vary with the composition of NADES, as well as with their initial water content. The use of NADES in the SCF foaming of SPCL, acting as foaming agent, was also performed and proved successful. The SPCL structure obtained after SCF foaming presented enhanced characteristics (such as porosity) when compared with the ones obtained using ILs as foaming enhancers. DES constituted by therapeutic compounds (THEDES) were also prepared. The combination of choline chloride-mandelic acid, and menthol-ibuprofen, resulted in THEDES with thermal behavior very distinct from the one of their components. The foaming of SPCL with THEDES was successful, and the impregnation of THEDES in SPCL matrices via SCF foaming was successful, and a controlled release system was obtained in the case of menthol-ibuprofen THEDES.