Built heritage-making and socioeconomic renewal in declining rural areas : evidence from Portugal

This article focuses on the connections between built heritage-making and socioeconomic renewal in declining rural areas. Drawing on fieldwork in twelve rural villages in eastern Portugal, it sheds light on the outcomes of a State-led programme, the objectives of which were to renovate the historic built fabric and generate tourism revenue for a region with declining population levels. Overall, the programme was successful in terms of preservation / conservation of monuments and the built fabric, but failed to stimulate the anticipated social and economic development. The conclusion is that the making of heritage spaces is not the remedy for the economic and demographic ills of rural areas, notwithstanding the positive effect that such measures may have in certain cases.

The two opposing impacts of heritage making on local communities : residents’ perceptions: a Portuguese case

This article examines the impact associated with the making of heritage and tourism at a destination. Special attention is paid to the residents’ perceptions of the impact. The examination is focused on the rural village of Sortelha, in Portugal, where, in recent decades, a state-led programme was implemented in order to renovate the historic buildings and built fabric and to generate benefits for the local community. Based on ethnographic materials collected in 2003, 2009 and 2013, the study demonstrates that the making of heritage may give rise to two opposing impacts simultaneously – increased social cohesion and place pride, on the one hand, and envy and competition (and, hence, social atomisation), on the other hand – and that residents are entirely cognisant of the tension between the two. The study has the potential to contribute to both the theoretical and the applied literature on heritage making.

Lime mortars with heat treated clays and ceramic waste: A review

The formulation and use of lime mortars with ceramic particles has, in the past, been a very common technique. Knowledge of such used techniques and materials is fundamental for the successful rehabilitation and conservation of the built heritage. The durability that these mortars have shown encourages the study of the involved mechanisms, so that they may be adapted to the current reality. The considerable amount of waste from old ceramics factories which is sent for disposal might present an opportunity for the production of reliable improved lime mortars. In this paper a number of studies that characterize old building mortars containing ceramic fragments are reviewed. The most important research undertaken on laboratory prepared mortars with several heat treated clays types is presented, specifically with incorporated ceramic waste. Some studies on the pozzolanicity of heat treated clays are examined and the heating temperatures that seem most likely to achieve pozzolanicity are presented. It was verified that some heating temperatures currently used by ceramic industries might correspond to the temperatures that will achieve pozzolanicity.

Lime mortars with ceramic wastes: characterization of components and their influence on the mechanical behaviour

Considering the fundamental importance of preserving the built heritage and of ensuring the good performance achieved by incorporating ceramic particles in lime mortars in ancient times, it is important to study solutions that use materials the available today, in order to produce mortars intended to repair and replace the old ones. Solutions incorporating industrial ceramic waste might be profitable for several reasons, namely for economic, environmental and technical aspects. In this paper, seven ceramic waste products collected from ceramics factories are characterized. Their mineralogy, dimensional features and pozzolanicity were determined. Three of these products, with different particle size fractions (obtained directly from milling, dust only and fragment fractions only), were selected, incorporated into air lime mortars, and their mechanical strength was determined. In the present work, evidence of mechanical efficiency, when common sand or air lime were partially replaced by ceramic wastes, was made clear, drawing attention to the sustainability of this type of mortars, hence, encouraging further research.

Evaporation from porous building materials and its cooling potential

Evaporative cooling is a traditional strategy to improve summer comfort, which has gained renewed relevance in the context of the transition to a greener economy. Here, the potential for evaporative cooling of two common porous building materials, natural stone and ceramic brick, was evaluated. The work has relevance also to the protection of built heritage becauseevaporation underlies the problems of dampness and salt crystallization, which are so harmful and frequent in this heritage. It was observed that the drying rate of the materials is, in some cases, higher than the evaporation rate of a free water surface. Surface area measurements by a three-dimensional optical technique suggested, as probable cause of this behavior, that surface irregularity gives rise to a large effective surface of evaporation in the material. Surface temperature measurements by infrared were performed afterward during evaporation experiments outside during a hot summer day in Lisbon. Their results indicate that ordinary building materials can be very efficient evaporative media and, thus, may help in achieving higher energy efficiency while maintaining a simultaneous constructive or architectural function.

Culturtainment - a new interactive entertainment genre: assessment of Cultural Heritage digital content in leisure software games

European Master in Multimedia and Audiovisual Administration

GIS from a cultural heritage perspective: when past and future collide

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Ciência e Sistemas de Informação Geográfica

A brief review of mass spectrometry in cultural heritage

Proceedings of the Chemistry and Conservation Science

Glass in Cultural Heritage – An Introduction

Proceedings of the Chemistry and Conservation Science

Analysis of early synthetic dyes with HPLC-DAD-MS: an important database for analysis of colorants used in cultural heritage

Presented thesis at Faculdade de Ciências e Tecnologias, Universidade de Lisboa, to obtain the Master Degree in Conservation and Restoration of Textiles

Novas utilizações das potencialidades BIM – apoio à medição de trabalhos realizados e produção de modelos as-built fiáveis e ricos em informação para a fase de manutenção

Congresso Construção 2012 - 4º Congresso Nacional/18, 19 e 20 Dezembro

Documenting InStory – Mobile Storytelling in a Cultural Heritage Environment

This paper describes the process and problems that had to be faced during the elaboration of a digital interactive narrative for the Instory project (http://img.di.fct.unl.pt/InStory/) implanted in «Quinta da Regaleira», Sintra, Portugal, and classified as World Heritage by Unesco. It also explores some of the practical and theoretical issues in what regards the literary terminology and strategies involved.

Novas utilizações das potencialidades BIM – produção de informação as-built e apoio à medição de trabalhos realizados com recurso a realidade aumentada

Dissertação para obtenção do Grau Mestre em Engenharia Civil – Perfil de Construção

A built-in self-test technique for high speed analog-to-digital converters

Fundação para a Ciência e a Tecnologia (FCT) - PhD grant (SFRH/BD/62568/2009)

A Cidade do Trabalho: usos do património industrial (S. João da Madeira)

S. João da Madeira é uma localidade que desde cedo construiu os seus discursos em torno da identidade local sob o epíteto de Cidade do Trabalho. Mais recentemente, desde a última década do século XX, a cidade começou a olhar para a sua dimensão industrial do ponto de vista do seu cunho patrimonial, dentro do quadro emergente das políticas culturais e de identidade, no qual as identidades particulares – como à escala local – se querem afirmar no plano global. Partindo de uma primeira análise dos processos contemporâneos de patrimonialização do industrial no contexto de S. João da Madeira, concretizados pela via dos museus e do turismo, num trabalho de projeto que se apresenta como fase de investigação preliminar de um futuro trabalho de doutoramento, questiona-se como a antropologia poderá pensar o conceito de cultura popular fora dos contextos normalmente a estes atribuídos e como, consequentemente, poderá problematizar as fronteiras daquilo que poderá ser considerado ou não Património Cultural Imaterial (PCI), categoria com a qual a disciplina está historicamente comprometida.