Modernidade e Medievalidade : a Mulher de Bath e a representação da relação conjugal

Série II - Nºs 8 e 9 - Colóquios - I Jornada de Cultura Inglesa - Família e Educação

New ultrasonic-based methods in proteomics

Dissertação apresentada para obtenção do Grau de Doutor em Bioquímica pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia.A presente dissertação foi preparada no âmbito do convénio bilateral existente entre a Universidade Nova de Lisboa e a Universidade de Vigo.

Influence of commercially available polyimide and formation conditions on the performance and structure of asymmetric polyimide organic solvent nanofiltration membranes

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Química e Bioquímica

Development of new methodologies in sample treatment for proteomics workflow based on enzymatic probe sonication technology and mass spectrometry

Thesis submitted to the Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia, for the degree of Doctor of Philosophy in Biochemistry

Ajudantes de acção directa : percepções sobre formação profissional e impacto da formação na prestação de cuidados a idosos dependentes internados

RESUMO: A transferência de indivíduos dependentes é uma das tarefas mais realizadas pelos ajudantes de acção directa (AAD) na prestação de cuidados a idosos, sendo crucial haver formação nesta área. No entanto, os programas de formação em transferências raramente são avaliados em termos de desempenho na realização deste tipo de tarefas. Objectivo: Este estudo teve como objectivos analisar o impacto da formação de AAD no desempenho da transferência de idosos internados na Residência São João de Ávila (RSJA) e identificar as percepções dos AAD relativamente à importância da formação profissional, formação em transferências e dificuldade sentida na sua realização. Métodos: Realizou-se um estudo com duas etapas: na primeira procedeu-se a um estudo descritivo exploratório (através de um questionário auto-administrado a 25 AAD); na segunda realizou-se um estudo quase experimental de observação com duas fases, entre as quais decorreu uma “Formação em Princípios e Conceitos Básicos em Reabilitação Física” (observação directa de 18 AAD durante a realização da transferência “deitado-sentado-cadeira” de idosos, através de uma grelha de observação). Resultados: O desempenho dos AAD na transferência melhorou após a formação. Os ajudantes manifestaram ter uma percepção positiva sobre a importância da formação profissional e da formação em transferências. Aproximadamente dois terços dos AAD revelaram não sentir dificuldades na realização de transferências. Conclusões: A formação teve um impacto positivo no desempenho dos AAD na transferência de idosos. Concluiu-se que há uma sensibilização generalizada por parte dos AAD para a importância da formação na sua profissão e, especificamente, para a formação em transferências. ---------------ABSTRACT: The transfers of dependent patients by healthcare assistants are tasks commonly used in elderly care. Therefore, it is crucial that healthcare assistants are trained to perform these tasks. However, training programs are rarely evaluated in terms of performance of these tasks. Aim: The aims of this study were 1) to determine the impact of healthcare assistant training in the transfers of the Residência São João de Ávila (RSJA) elderly patients; and 2) to analyze healthcare assistant’s perceptions about their education, their specialized training on the transfer technique, and their difficulty in performing transfers. Methods: The study was divided in two parts: an exploratory and descriptive study (self-report questionnaire applied to 25 healthcare assistants); and a quasi-experimental observation study, which involved a “training session on basic concepts and principles of physical rehabilitation” (direct observation of 18 healthcare assistants during the “bed-sitting-chair” transfer, using an observation table). Results: Healthcare assistant performance of the “bed-sitting-chair” transfer improved after training. The healthcare assistants showed positive perceptions about their education and specialized training on the transfer technique. Approximately two thirds of the assistants felt no difficulties in performing transfer tasks. Conclusions: The training had a positive influence in healthcare assistant performance. The healthcare assistants were aware of the importance of training in their profession and more specifically in transfer tasks.

Preparation and characterization of microfiltration flat polymeric membranes for biomedical applications

Dissertation presented to Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa for obtaining the master degree in Membrane Engineering

Design and characterization of Chitin- Glucan polymeric structures for wound dressing materials

The main objective of this work was the development of polymeric structures, gel and films, generated from the dissolution of the Chitin-Glucan Complex (CGC) in biocompatible ionic liquids for biomedical applications. Similar as chitin, CGC is only soluble in some special solvents which are toxic and corrosive. Due to this fact and the urgent development of biomedical applications, the need to use biocompatible ionic liquids to dissolve the CGC is indispensable. For the dissolution of CGC, the biocompatible ionic liquid used was Choline acetate. Two different CGC’s, KiOnutrime from KitoZyme and biologically produced CGC from Faculdade de Ciencias e Tecnologia (FCT) - Universidade Nova de Lisboa, were characterized in order to develop biocompatible wound dressing materials. The similar result is shown in term of the ratio of chitin:glucan, which is 1:1.72 for CGC-FCT and 1:1.69 for CGC-Commercial. For the analysis of metal element content, water and inorganic salts content and protein content, both polymers showed some discrepancies, where the content in CGC-FCT is always higher compared to the commercial one. The different characterization results between CGC-FCT and CGC-Commercial could be addressed to differences in the purification method, and the difference of its original strain yeast, whereas CGC-FCT is derived from P.pastoris and the commercial CGC is from A.niger. This work also investigated the effect of biopolymers, temperature dissolution, non-solvent composition on the characteristics of generated polymeric structure with biocompatible ionic liquid. The films were prepared by casting a polymer mixture, immersion in a non-solvent, followed by drying at ambient temperature. Three different non-solvents were tested in phase inversion method, i.e. water, methanol, and glycerol. The results indicate that the composition of non-solvent in the coagulation bath has great influence in generated polymeric structure. Water was found to be the best coagulant for producing a CGC polymeric film structure. The characterizations that have been done include the analysis of viscosity and viscoelasticity measurement, as well as sugar composition in the membrane and total sugar that was released during the phase inversion method. The rheology test showed that both polymer mixtures exhibit a non- Newtonian shear thinning behaviour. Where the viscosity and viscoelasticity test reveal that CGCFCT mixture has a typical behaviour of a viscous solution with entangled polymer chains and CGCCommercial mixture has true gel behaviour. The experimental results show us that the generated CGC solution from choline acetate could be used to develop both polymeric film structure and gel. The generated structures are thermally stable at 100° C, and are hydrophilic. The produced films have dense structure and mechanical stabilities against puncture up to 60 kPa.

Dissecting gastrointestinal dysfunction and inflammation in a “pre-motor” rodent model of Parkinson’s disease

Research on Parkinson’s disease (PD) has mainly focused on the degeneration of the dopaminergic neurons of nigro-striatal (NS) pathway; also, post-mortem studies have demonstrated that the noradrenergic and the serotonergic transmitter systems are also affected (Jellinger, 1999). Degeneration of these neuronal cell bodies is generally thought to start prior to the loss of dopaminergic neurons in the NS pathway and precedes the appearance of the motor symptoms that are the “hallmark” of PD. Gastrointestinal (GI) motility is often disturbed in PD, manifesting chiefly as impaired gastric emptying and constipation. These GI dysfunction symptoms may be the result of a loss in noradrenergic and serotonergic innervation. GI deficits were evaluated using an organ bath technique. Groups treated with different combinations of neurotoxins (6-OHDA alone, 6-OHDA + pCA or 6-OHDA + DSP-4) presented significant differences in gut contractility compared to control groups. Since a substantial body of literature suggests the presence of an inflammatory process in parkinsonian state (Whitton, 2007), changes in pro-inflammatory cytokines in the gut were assessed using a cytokine microarray. It has been found in this work that groups with a combined dopaminergic and noradrenergic lesion have a significant increase in both expressions of IL-13 and VEGF. IL-6 also shows a decrease in treatment groups; however this decrease did not reach statistical significance. The therapeutic value of Exendin-4 (EX-4) was evaluated. It has been previously demonstrated that EX-4, a glucagon-like peptide-1 receptor (GLP-1R) agonist, is neuroprotective in rodent models of PD (Harkavyi et al., 2008). In this thesis it has been found that EX-4 was able to reverse a decrease in gut contractility obtained through intracerebral bilateral 6-OHDA injection. Although more studies are required, EX-4 could be used as a possible therapy for the GI symptoms prominent in the early stages of PD.

Fragilidade e pré-fragilidade em pessoas idosas residentes na comunidade

RESUMO: Objectivo: Este estudo tem como principal objectivo determinar perfis de fragilidade em pessoas idosas, residentes ma comunidade. Metodologia: Trata-se de um estudo de natureza não experimental, quantitativo, exploratório e descritivo, com uma amostra de conveniência, constituída por pessoas idosas (n=47), residentes na comunidade. As variáveis em análise foram o fenótipo de fragilidade, onde a força de preensão foi avaliada através de um dinamómetro portátil, a percepção de exaustão através da CES-D, a velocidade de marcha foi avaliada pelo Timed Up and Go Test, a actividade física através de uma escala simplificada, com base nos estudos de Grimby, e a perda de peso não intencional através de uma questão sobre perda de peso no último ano. As restantes variáveis foram avaliadas por questionário, à excepção da capacidade funcional, avaliada por uma escala com actividades básicas e instrumentais da vida diária assim como locomoção, e da força de membros inferiores, avaliada pelo teste de sentar e levantar da cadeira durante 30 segundos. Resultados: Verificou-se que a maioria da amostra era pré-frágil, com uma frequência próxima de fragilidade e uma quase inexistência de não fragilidade. Contribui para isto, essencialmente, a velocidade de marcha e perda de peso não intencional. Apesar de se encontrar uma grande presença de comorbilidade e independência com limitação nos indivíduos deste estudo, não se verifica uma relação de significância entre estas variáveis. Verificam-se relações significativas com a Hipertensão arterial e a percepção do estado de saúde. Conclusão: Não foi possível definir um perfil de fragilidade de forma consistente, devido à grande variabilidade de resultados encontrados e à não existência de correlações significativas, no que diz respeito à síndrome de fragilidade. -----------ABSTRACT: Objective: This study aims to determine profiles of fragility in elderly people, living in the community Methodology: This is a study of a non experimental, quantitative, exploratory and descriptive, with a convenience sample, consisting of elderly (n = 47), living in the community. The variables analyzed were the frailty phenotype where grip strength was measured using a handheld dynamometer, the perception of exhaustion through the CES-D, gait speed was assessed by the Timed Up and Go Test, physical activity through a simplified scale based on studies of Grimby and unintentional loss of weight through a question about weight loss in the last year.The remaining variables were assessed by questionnaire, with the exception of functional capacity assessed by a scale with basic and instrumental activities of daily living as well as locomotion, and lower limb strength, evaluated by sitting and rising from a chair for 30-second test. Results: It was found that most of the sample was pre-fragile with a frequency close to the fragility and almost no non-brittleness. Contribute to this, essentially, gait speed and unintentional weight loss. Despite being a large presence of comorbidity and independence in individuals with limitation of this study, no there is a significant relationship between this variables. There are significant relations with hypertension and the perception of health status. Conclusion: It was not possible to define a profile of fragility consistently, due to the great variability of results and the absence of significant correlations, with respect to the frailty syndrome.

Towards printed carbon nanotube transistors on paper substrates

This thesis reports the work performed in the optimization of deposition parameters of Multi – Walled Carbon Nanotubes (MWCNT) targeting the development of a Field Effect Transistors (FET) on paper substrates. The CNTs were dispersed in a water solution with sodium dodecyl sulphate (SDS) through ultrasonication, ultrasonic bath and a centrifugation to remove the supernatant and have a homogeneous solution. Several deposition tests were performed using different types of CNTs, dis-persants, papers substrates and deposition techniques, such as spray coating and inkjet printing. The characterization of CNTs was made by Scanning Electron Microscopy (SEM) and Hall Effect. The most suitable CNT coatings able to be used as semiconductor in FETs were deposited by spray coat-ing on a paper substrate with hydrophilic nanoporous surface (FS2) at 100 ºC, 4 bar, 10 cm height, 5 second of deposition time and 90 seconds of drying between steps (4 layers of CNTs were deposited). Planar electrolyte gated FETs were produced with these layers using gold-nickel gate, source and drain electrodes. Despite the small current modulation (Ion/Ioff ratio of 1.8) one of these devices have p-type conduction with a field effect mobility of 1.07 cm2/V.s.

40 K Neon liquid energy storage unit

Cryocoolers have been progressively replacing the use of the stored cryogens in cryogenic chains used for detector cooling, thanks to their higher and higher reliability. However, the mechanical vibrations, the electromagnetic interferences and the temperature fluctuations inherent to their functioning could reduce the sensor’s sensitivity. In order to minimize this problem, compact thermal energy storage units (ESU) are studied, devices able to store thermal energy without significant temperature increase. These devices can be used as a temporary cold source making it possible to turn the cryocooler OFF providing a proper environment for the sensor. A heat switch is responsible for the thermal decoupling of the ESU from the cryocooler’s temperature that increases when turned OFF. In this work, several prototypes working around 40 K were designed, built and characterized. They consist in a low temperature cell that contains the liquid neon connected to an expansion volume at room temperature for gas storage during the liquid evaporation phase. To turn this system insensitive to the gravity direction, the liquid is retained in the low temperature cell by capillary effect in a porous material. Thanks to pressure regulation of the liquid neon bath, 900 J were stored at 40K. The higher latent heat of the liquid and the inexistence of triple point transitions at 40 K turn the pressure control during the evaporation a versatile and compact alternative to an ESU working at the triple point transitions. A quite compact second prototype ESU directly connected to the cryocooler cold finger was tested as a temperature stabilizer. This device was able to stabilize the cryocooler temperature ((≈ 40K ±1 K) despite sudden heat bursts corresponding to twice the cooling power of the cryocooler. This thesis describes the construction of these devices as well as the tests performed. It is also shown that the thermal model developed to predict the thermal behaviour of these devices, implemented as a software,describes quite well the experimental results. Solutions to improve these devices are also proposed.

40 K neon liquid energy storage unit

Cryocoolers have been progressively replacing the use of the stored cryogens in cryogenic chains used for detector cooling, thanks to their higher and higher reliability. However, the mechanical vibrations, the electromagnetic interferences and the temperature fluctuations inherent to their functioning could reduce the sensor’s sensitivity. In order to minimize this problem, compact thermal energy storage units (ESU) are studied, devices able to store thermal energy without significant temperature increase. These devices can be used as a temporary cold source making it possible to turn the cryocooler OFF providing a proper environment for the sensor. A heat switch is responsible for the thermal decoupling of the ESU from the cryocooler’s temperature that increases when turned OFF. In this work, several prototypes working around 40 K were designed, built and characterized. They consist in a low temperature cell that contains the liquid neon connected to an expansion volume at room temperature for gas storage during the liquid evaporation phase. To turn this system insensitive to the gravity direction, the liquid is retained in the low temperature cell by capillary effect in a porous material. Thanks to pressure regulation of the liquid neon bath, 900 J were stored at 40K. The higher latent heat of the liquid and the inexistence of triple point transitions at 40 K turn the pressure control during the evaporation a versatile and compact alternative to an ESU working at the triple point transitions. A quite compact second prototype ESU directly connected to the cryocooler cold finger was tested as a temperature stabilizer. This device was able to stabilize the cryocooler temperature ((≈ 40K ±1 K) despite sudden heat bursts corresponding to twice the cooling power of the cryocooler. This thesis describes the construction of these devices as well as the tests performed. It is also shown that the thermal model developed to predict the thermal behaviour of these devices,implemented as a software, describes quite well the experimental results. Solutions to improve these devices are also proposed.

Study of Helium II heat transport phenomena in superconducting rutherford type cables

This thesis is a study of how heat is transported in non-steady-state conditions from a superconducting Rutherford cable to a bath of superfluid helium (He II). The same type of superconducting cable is used in the dipole magnets of the Large Hadron Collider (LHC). The dipole magnets of the LHC are immersed in a bath of He II at 1.9 K. At this temperature helium has an extremely high thermal conductivity. During operation, heat needs to be efficiently extracted from the dipole magnets to keep their superconducting state. The thermal stability of the magnets is crucial for the operation of the LHC, therefore it is necessary to understand how heat is transported from the superconducting cables to the He II bath. In He II the heat transfer can be described by the Landau regime or by the Gorter-Mellink regime, depending on the heat flux. In this thesis both measurements and numerical simulation have been performed to study the heat transfer in the two regimes. A temperature increase of 8 2 mK of the superconducting cables was successfully measured experimentally. A new numerical model that covers the two heat transfer regimes has been developed. The numerical model has been validated by comparison with existing experimental data. A comparison is made between the measurements and the numerical results obtained with the developed model.