The effect of key process operational conditions on enhanced biological phosphorus removal from wastewater

Enhanced biological phosphorus removal (EBPR) is the most economic and sustainable option used in wastewater treatment plants (WWTPs) for phosphorus removal. In this process it is important to control the competition between polyphosphate accumulating organisms (PAOs) and glycogen accumulating organisms (GAOs), since EBPR deterioration or failure can be related with the proliferation of GAOs over PAOs. This thesis is focused on the effect of operational conditions (volatile fatty acid (VFA) composition, dissolved oxygen (DO) concentration and organic carbon loading) on PAO and GAO metabolism. The knowledge about the effect of these operational conditions on EBPR metabolism is very important, since they represent key factors that impact WWTPs performance and sustainability. Substrate competition between the anaerobic uptake of acetate and propionate (the main VFAs present in WWTPs) was shown in this work to be a relevant factor affecting PAO metabolism, and a metabolic model was developed that successfully describes this effect. Interestingly, the aerobic metabolism of PAOs was not affected by different VFA compositions, since the aerobic kinetic parameters for phosphorus uptake, polyhydroxyalkanoates (PHAs) degradation and glycogen production were relatively independent of acetate or propionate concentration. This is very relevant for WWTPs, since it will simplify the calibration procedure for metabolic models, facilitating their use for full-scale systems. The DO concentration and aerobic hydraulic retention time (HRT) affected the PAO-GAO competition, where low DO levels or lower aerobic HRT was more favourable for PAOs than GAOs. Indeed, the oxygen affinity coefficient was significantly higher for GAOs than PAOs, showing that PAOs were far superior at scavenging for the often limited oxygen levels in WWTPs. The operation of WWTPs with low aeration is of high importance for full-scale systems, since it decreases the energetic costs and can potentially improve WWTP sustainability. Extended periods of low organic carbon load, which are the most common conditions that exist in full-scale WWTPs, also had an impact on PAO and GAO activity. GAOs exhibited a substantially higher biomass decay rate as compared to PAOs under these conditions, which revealed a higher survival capacity for PAOs, representing an advantage for PAOs in EBPR processes. This superior survival capacity of PAOs under conditions more closely resembling a full-scale environment was linked with their ability to maintain a residual level of PHA reserves for longer than GAOs, providing them with an effective energy source for aerobic maintenance processes. Overall, this work shows that each of these key operational conditions play an important role in the PAO-GAO competition and should be considered in WWTP models in order to improve EBPR processes.

Characterization tests for insulation boards made from corn cob and natural glues

In recent years there has been a growing interest in developing news solutions for more ecologic and efficient construction, including natural, renewable and local materials, thus contributing in the search for more efficient, economic and environmentally friendly construction. Several authors have assessed the possibility of using various agricultural sub products or wastes, as part of the effort of the scientific community to find alternative and more ecologic construction materials. Corn cob is an agricultural waste from a very important worldwide crop. Natural glues are made from natural materials, non-mineral, that can be used as such or after some modifications to achieve the behaviour and performance required. Two examples of these natural glues are casein and wheat flour-based glues that were used in the present study. Boards with different compositions were manufactured, having as variables the type of glue, the dimension of the corn cob particles and the features of the pressing process. The tests boards were characterized with physical and mechanical tests, such as thermal conductivity (λ) with a ISOMET 2104 and 60 mm diameter contact probe, density (ρ) based on EN 1602:2013, surface hardness (SH) with a PCE Shore A durometer, surface resistance (SR) with a PROCEQ PT pendular sclerometer, bending behaviour (σ) based on EN 12089:2013, compression behaviour (σ10) based on EN 826:2013 and resilience (R) based on EN 1094-1:2008, with a Zwick Rowell bending equipment with 2 kN and 50 kN load cells (Fig. 1), dynamic modulus of elasticity (Ed) with a Zeus Resonance Meter equipment (Fig. 5) based on NP EN 14146:2006 and water vapour permeability (δ) based on EN 12086:2013. The various boards produced were characterized according to the tests and the ones with the best results were C8_c8 (casein glue, grain size 2,38-4,76 mm, cold pressing for 8 hours), C8_c4 (casein glue, grain size 2,38-4,76 mm, cold pressing for 4 hours), F8_h0.5 (wheat flour glue, grain size 2,38-4,76 mm, hot pressing for 0,5 hours), FEV8_h0.5 (wheat flour, egg white and vinegar glue, grain size 2,38-4,76 mm, hot pressing for 0,5 hours) and FEVH68_c4 (wheat flour, egg white, vinegar and 6 g of sodium hydroxide glue, grain size 2,38-4,76 mm, cold pressing for 4 hours). Taking into account the various boards produced and respective test results the type of glue and the pressure and pressing time are very important factors which strongly influence the final product. The results obtained confirmed the initial hypotheses that these boards have potential as a thermal and, eventually, acoustic insulation material, to use as coating or intermediate layer on walls, floors or false ceilings. This type of board has a high mechanical resistance when compared with traditional insulating materials.The integrity of these boards seems to be maintained even in higher humidity environments. However, due to biological susceptibility and sensitivity to water, they would be more adequate for application in dry interior conditions.

The use of analytical hierarchy process in spatial decision support system for land use management

Geographic information systems give us the possibility to analyze, produce, and edit geographic information. Furthermore, these systems fall short on the analysis and support of complex spatial problems. Therefore, when a spatial problem, like land use management, requires a multi-criteria perspective, multi-criteria decision analysis is placed into spatial decision support systems. The analytic hierarchy process is one of many multi-criteria decision analysis methods that can be used to support these complex problems. Using its capabilities we try to develop a spatial decision support system, to help land use management. Land use management can undertake a broad spectrum of spatial decision problems. The developed decision support system had to accept as input, various formats and types of data, raster or vector format, and the vector could be polygon line or point type. The support system was designed to perform its analysis for the Zambezi river Valley in Mozambique, the study area. The possible solutions for the emerging problems had to cover the entire region. This required the system to process large sets of data, and constantly adjust to new problems’ needs. The developed decision support system, is able to process thousands of alternatives using the analytical hierarchy process, and produce an output suitability map for the problems faced.

Improving downstream processing for viral vectors and viral vaccines

Viral vectors are playing an increasingly important role in the vaccine and gene therapy elds. The broad spectrum of potential applications, together with expanding medical markets, drives the e orts to improve the production processes for viral vaccines and viral vectors. Developing countries, in particular, are becoming the main vaccine market. It is thus critical to decrease the cost per dose, which is only achievable by improving the production process. In particular advances in the upstream processing have substantially increased bioreactor yields, shifting the bioprocess bottlenecks towards the downstream processing. The work presented in this thesis aimed to develop new processes for adenoviruses puri cation. The use of state-of-the-art technology combined with innovative continuous processes contributed to build robust and cost-e ective strategies for puri cation of complex biopharmaceuticals.(...)

A model to screen and improve business potential of micro and small enterprises in developing countries: Evidence from the Island of Mozambique

Programmes supporting micro and small enterprises in developing countries have been showing that capital is not enough to allow business success: survival and growth. Literature does not provide comprehensive and practical tool to support business development in this context, but allowed the collection of forty-nine success variables that were studied in a sample of successful and unsuccessful businesses in the Island of Mozambique to discover what were the key factors affecting those businesses’ performance. Empirical data gave the insights for the development of a model to screen and improve business potential of micro and small enterprises in this context.

Adaptação cultural e contributo para a validação da pain attitudes and believes scale for physiotherapists (PABS-PT) para a população de fisioterapeutas portugueses

RESUMO: Introdução: Vários estudos têm encontrado evidência para a relação entre as crenças e atitudes dos profissionais de saúde, a sua abordagem de tratamento, referida como orientada segundo o modelo biomédico ou modelo biopsicossocial (Bishop, 2008; Mutsaers, 2012), e os resultados obtidos. É sugerido que, no tratamento da dor lombar crónica, os profissionais que orientam o seu raciocínio e prática segundo o modelo biomédico, tendem a obter piores resultados quando comparados com os obtidos pelos profissionais que orientam o seu raciocínio e prática segundo uma abordagem biopsicossocial. Esta área de estudo tem salientado a importância de desenhar instrumentos capazes de identificar a orientação preferencial dos profissionais de saúde no tratamento da dor crónica de natureza músculo-esquelética, entre os quais se encontra a “Pain Attitudes and Beliefs Scale for Physiotherapists” (PABS-PT). Objetivo: Adaptar culturalmente a PABS-PT para a população de fisioterapeutas portugueses que intervêm em utentes com dor (lombar) crónica, e contribuir para a sua validação Metodologia: A versão original (língua inglesa) do PABS-PT foi adaptada para a língua e cultura portuguesas, através das etapas definidas nas normas orientadoras estabelecidas para este processo (Beaton et al., 2002; MAPI Institute, 2001). A avaliação das propriedades psicométricas da versão portuguesa foi realizada com recurso a uma amostra de 202 fisioterapeutas e estudantes finalistas do curso de licenciatura em Fisioterapia. Inicialmente foi realizada a análise fatorial exploratória da escala através do método das componentes principais. Posteriormente avaliou-se a consistência interna das componentes obtidas com recurso ao alpha de Cronbach (α). Para analisar a validade de constructo foram correlacionadas as componentes obtidas com a versão portuguesa da “Health Care Providers’ Pain and Impairment Relationship Scale” (HC-PAIRS), recorrendo ao cálculo do coeficiente de Spearman. Resultados: O processo de adaptação cultural não revelou dificuldades importantes sendo considerado que a versão portuguesa da PABS-PT é de fácil compreensão e preenchimento, e os seus itens adequados para avaliar as crenças e atitudes dos fisioterapeutas portugueses relativas à intervenção na dor crónica músculo-esquelética. Os resultados revelaram uma estrutura fatorial de duas componentes, identificadas com as componentes da escala original que explicam 30,96% da variância total. A consistência interna encontrada é boa, para a componente biomédica (α de Cronbach = 0,826), mas muito fraca para a componente biopsicossocial (α de Cronbach= 0,589). Relativamente à validade convergente e discriminativa, foi encontrada uma associação estatisticamente significativa e positiva, entre as componentes 1 (biomédica) da versão nportuguesa da PABS e a HC-PAIRS (Rs = 0,481, p≤ 0,005), e negativa, fraca e significativa entre a pontuação total da componente 2 (biopsicossocial) e a HC-PAIRS (Rs = -0,038, p=0,612). Conclusão: A versão portuguesa do PABS-PT é de fácil compreensão e aparenta ser um instrumento válido para a medição da orientação preferencial dos fisioterapeutas, relativamente às suas atitudes e crenças na avaliação e tratamento de utentes com dor crónica de natureza músculo-esquelética. No entanto, a componente biopsicossocial requer uma análise mais aprofundada para que possa, com rigor, ser utilizada na definição de uma orientação preferencialmente biopsicossocial.--------------ABSTRACT: Introduction: Previous studies have found a relation between the beliefs and attitudes of health professionals, their treatment approach, which can follows a biomedical or a biopsychosocial orientation (Bishop, 2008; Mutsaers, 2012), and the outcomes obtained. Therefore, is suggested that the professionals who tend to approach chronic low back pain patients according to the biomedical model have worse outcomes than professionals who use a biopsychosocial approach in there clinical reasoning. This research field has highlighted the importance of developing measures capable of identifying the preferred orientation of health professionals in the treatment of chronic pain of musculoskeletal nature, including the “Pain Attitudes and Beliefs Scale for Physiotherapists” (PABS-PT). Objective: To cross culturally adapt and validate the PABS-PT for the Portuguese population of physiotherapists. Methodology: The original version (English version) of the PABS-PT was adapted to the Portuguese language and culture, through the guidelines established for these processes (Beaton et al., 2002; MAPI Institute, 2001). The psychometric evaluation of the Portuguese version was carried out on a sample of 202 p physiotherapist and final year students of the physiotherapy course. Initially, an exploratory factorial analysis was performed through the method of the main components. Then, the internal consistence of the main components was evaluated using the Cronbach’s alpha (α). The convergent construct validity was analysed through the correlation between the obtained components of PABS-PT and the Health Care Provider’s Pain and Impairment Relationship Scale (HC-PAIRS), using the Spearmen correlation coefficient. Results: No major difficulties were found during the cultural adaptation process of PABS-PT to Portugal, which means that the Portuguese version is easy to understand and fulfill, and items are appropriated to evaluate the beliefs and attitudes of the Portuguese physiotherapists who treat chronic pain of musculoskeletal origins. The results revealed a factorial structure of two components, as the original scale, explaining 30,96% of the total variance. Internal consistence results were good, for the biomedical component (Cronbach’s α = 0,826), but very weak for the biopsychosocial componente (Cronbach’s α = 0,589). Relatively to convergent and discriminative validity, a statistically significant association was found, between the components 1 (biomedical) of the Portuguese version of PABS-PT and the HC-PAIRS (Rs= 0,481, p≤ 0,005) and negative, weak and significant between the total score of component 2 (biopsychosocial) and the HC-PAIRS (Rs = -0,038, p=0,612). Conclusion: The Portuguese Version of PABS-PT is easy to understand and seems to be a valid instrument to measure the attitudes and beliefs of physiotherapists in the management of patients with chronic low back pain. However, the biopsychosocial component requires a further deep analysis to examine a preferable biopsychosocial orientation.

How to increase and attract more tourists into Kenya throught experiental marketing

This marketing plan project is a culmination of extensive strategies with the use of experiential marketing to address issues confronting the Kenyan tourism industry in order to have a sustainable tourism sector. Following the terrorist attack carried out by Islamist militants’ belonging to al-Shabaab terrorist organization on Nairobi’s Westgate shopping mall in September 2013, tourist forecast has gone down sharply with an average of 20% fall in tourists’ arrivals which is likely to have an impact on the tourism sector in Kenya. Even before the deadly attack on Westgate, the most lethal attack by Islamist terrorists in 15 years in Kenya, the government through the Kenya tourist board had announced that in 2013 tourist arrivals were down by 12%, at 495,978, according to an October 2013 report by Bloomberg. Tourism revenues were also down by 7.4%, over FY12/13 (July-June) to reach KES96.24bn, according to a September 2013 report on the local Capital FM website. Beyond 2013, much will depend on how quickly the Kenya tourist board can regain control of the situation. The Kenyan government believes that the Westgate mall attack was a 'one-off' incident, with a low probability of a similar event happening again over the short term period. Germany, United States, United Kingdom, Australia, Italy, France and Canada continue to be the key source market however; the Kenya tourist board can make continued growth stronger from new emerging markets in order to increase new arrivals into the country. The marketing plan outlines the objectives to be implemented and provides the implementation strategy, activity plans, monitoring and evaluation plans, financial requirements projections and proposes a new structure of experiential marketing. A number of regional forces are identified that will impact tourism into the country including global, social and economic forces, emerging trends in visitor motivations and behavior, emerging forces in experiential marketing. A major component of the strategy identifies target markets for Kenya to commensurate with the level of resources that will be available for marketing and promotion, in keeping with the forces and trends identified and the nature of the Kenya tourism environment. The agreed upon target market segments are: generic/mass travel, experiential travel, creative travel, adventure seeking travel, senior/extended/long stay travel, and business related travel. The strategy phases the development of the target markets over the years of the marketing strategies in order to yield the best opportunity for results. A core activity in developing a marketing strategy is determining the nature of experiences Kenya offers in tourism. The strategy’s experience development process will continue to develop within the context of the products identified which will be promoted regionally: culture/heritage, nature, community-based. Each county in the country has a significant number of attractions and experiences and the challenge of the country is to bring these together in a creative and innovative way in order to encourage tourists to visit more than one county in Kenya.

Process virtualization theory (PVT) and institutional theory (INT) to explain SAAS adoption

Software as a service (SaaS) is a service model in which the applications are accessible from various client devices through internet. Several studies report possible factors driving the adoption of SaaS but none have considered the perception of the SaaS features and the pressures existing in the organization’s environment. We propose an integrated research model that combines the process virtualization theory (PVT) and the institutional theory (INT). PVT seeks to explain whether SaaS processes are suitable for migration into virtual environments via an information technology-based mechanism. INT seeks to explain the effects of the institutionalized environment on the structure and actions of the organization. The research makes three contributions. First, it addresses a gap in the SaaS adoption literature by studying the internal perception of the technical features of SaaS and external coercive, normative, and mimetic pressures faced by an organization. Second, it empirically tests many of the propositions of PVT and INT in the SaaS context, thereby helping to determine how the theory operates in practice. Third, the integration of PVT and INT contributes to the information system (IS) discipline, deepening the applicability and strengths of these theories.

A logical foundation for session-based concurrent computation

Linear logic has long been heralded for its potential of providing a logical basis for concurrency. While over the years many research attempts were made in this regard, a Curry-Howard correspondence between linear logic and concurrent computation was only found recently, bridging the proof theory of linear logic and session-typed process calculus. Building upon this work, we have developed a theory of intuitionistic linear logic as a logical foundation for session-based concurrent computation, exploring several concurrency related phenomena such as value-dependent session types and polymorphic sessions within our logical framework in an arguably clean and elegant way, establishing with relative ease strong typing guarantees due to the logical basis, which ensure the fundamental properties of type preservation and global progress, entailing the absence of deadlocks in communication. We develop a general purpose concurrent programming language based on the logical interpretation, combining functional programming with a concurrent, session-based process layer through the form of a contextual monad, preserving our strong typing guarantees of type preservation and deadlock-freedom in the presence of general recursion and higher-order process communication. We introduce a notion of linear logical relations for session typed concurrent processes, developing an arguably uniform technique for reasoning about sophisticated properties of session-based concurrent computation such as termination or equivalence based on our logical approach, further supporting our goal of establishing intuitionistic linear logic as a logical foundation for sessionbased concurrency.

Contribution to a strategic plan for the implementation of continuous improvement process in an MRO

This Work Project studies the Continuous Improvement and Processes (CIP) department at TAP Maintenance & Engineering. The project has the objective to provide insights to align the activities of the department with the strategy of the organization. For such, two focuses were taken: (i) an internal analysis which highlighted a need for transversal change to ensure the adoption of Continuous Improvement at TAP, and (ii) a process which outlined objectives and projects to be pursued to prioritize CIP’s activities in accordance with the organization’s goals. The outcome includes (a) important recommendations concerning strategic planning and competition evaluation and (b) a process’ output that reflects a balance among factors influencing the priority of projects.

Decision-making process of Nova Executivos’ students

Field lab: Consumer insights

Promoting the Big Slice Pizzaria and developing key partnerships

The Purpose of this Work Project is to develop a Marketing plan, with a special focus on promotional activities and partnerships’ developments, for the Big Slice, a fast food Pizzeria that is currently operating in Lisbon, where I'm currently working in the marketing and promotion department. The project aims at developing promotions and key partnerships that maximize the opportunity. For that, I have analyzed the major trends in the food sector in Portugal, and I have conducted several qualitative interviews among young individuals. Finally I have developed and implemented various alternative promotions and established important key partnerships.

Integration of speech-processing technologies into Activobank's client interaction process

This dissertation analyzes the possibilities of utilizing speech-processing technologies to transform the user experience of ActivoBank’s customers while using remote banking solutions. The technologies are examined through different criteria to determine if they support the bank’s goals and strategy and whether they should be incorporated in the bank’s offering. These criteria include the alignment with ActivoBank’s values, the suitability of the technology providers, the benefits these technologies entail, potential risks, appeal to the customers and impact on customer satisfaction. The analysis suggests that ActivoBank might not be in a position to adopt these technologies at this point in time.

Sustainable urban planning: parameters to the operational process

In modern society, energy consumption and respect for the environment have become essential aspects of urban planning. The rising demand for alternative sources of energy, coupled with the decline in the construction sector and material usage, gives the idea that the thinking on modern cities, where attention is given to reduced energy consumption, savings, waste recycling and respect for the surrounding environment, is being put into practice. If we examine development of the city over recent centuries, by means of the theories of the most famous and influential urban planners, it is possible to identify the major problems caused by this type of planning. For this reason, in recent urban planning the use of systems of indicators that evaluate and certify land environmentally and energetically guides the master plan toward a more efficient city model. In addition the indicators are targeted on key factors determined by the commissioner or the opportunities the territory itself provides. Due the complexity of the environmental mechanics, the process of design and urban planning has become a challenging issue. The introduction of the indicators system has made it possible to register the life of the process, with a spiral route that allows the design itself to be refined. The aim of this study, built around the creation of a system of urban sustainability indicators that will evaluate highly eco-friendly cities, is to develop a certification system for cities or portions of them. The system will be upgradeable and objective, will employ real data and will be concerned with energy production and consumption.

Developing a gamification system to increase customer lifetime value at MyGon

There have never been so many touch points between companies and consumers as there are today, which paradoxically makes it very challenging for companies to be able to retain and engage customers. Gamification is a strategy used by a large number of companies to increase customer engagement and customer lifetime value. This work aims at developing a gamification system for MyGon, a Portuguese startup working in the market of discounts and experiences. In addition to examining the literature concerning gamification, its elements and characteristics, recommendations were developed for addressing MyGon’s business goals of increasing conversion and customer engagement. The gamification mechanisms suggested include badges, missions, points, leaderboards and levels.