Relatório de estágio curricular realizado na Câmara Municipal de Lisboa

The experience of an internship is always considered an experience that should be enriching, a first contact with the employment world. The intention is to build a bridge between the theory and practice - applying what has been learnt throughout the course. Therefore, it was started a new learning phase that seeks to take advantage and obtain experiences useful for a professional life based in efficiency and efficacy. The curricular internship was carried out within the Masters in Public Law and held by Faculdade de Direito da Universidade Nova de Lisboa (FDUNL)(Law School Of University New Of Lisbon) in the Câmara Municipal de Lisboa (CML) (Lisbon's Town Hall), in the Departamento de Política de Solos e Valorização Patrimonial (DPSVP) (Soil Politics and Patrimonial Valuation Department) of the Direção Municipal de Planeamento, Reabilitação e Gestão Urbanística (Municipal Direction of Planning, Rehabilitation and Urban Management) between September and December 2013. Throughout this internship, several activities within the DPSVP were developed. In an early stage, there was a presentation of the organic structure of Lisbon's Town Hall, and the Department where I was going to do the internship, and its competencies. Therefore I acquired key concepts and researched jurisprudence and legislation needed to the analysis and understanding of the activities done in the internship. In a second stage, it was done the analysis and understanding of the division into lots administrative procedures, as well as the solving of the problems occurred throughout that analysis. Besides that, there was the need to help preparing some procedural acts to be applied regarding the Department competencies, namely within the alienation, procurement, encumbrance and rental of immovable assets owned by the Municipality of Lisbon.

Relatório de estágio no Centro de Arbitragem Comercial da Câmara de Comércio e Indústria Portuguesa

This report is the outcome of an internship that took place in Centro de Arbitragem Comercial da Câmara de Comércio e Indústria Portuguesa and its completion is an essential part of the path towards obtaining the Master’s Degree in Faculdade de Direito da Universidade Nova de Lisboa. This report has been structured in two stages – firstly, the presentation of the Centro de Arbitragem Comercial, focusing on its field of expertise, organic structure, principles and advantages. Then, the description of the activities developed within the Secretariat over the several stages of the arbitration procedure – since the reception of the arbitration requirement in institutional proceedings, terms of reference in ad hoc procedures, through the monitoring of the arbitral tribunal sessions (preliminary hearings, submission of evidence and final allegations) and the notification of the arbitration award. The second stage of this report is related to the description of the functions and powers of the President of Centro de Arbitragem Comercial. Firstly, it defines those powers by analyzing the statutes and rules of proceedings of the Centro de Arbitragem, drawing comparisons between the above mention and the rules of proceedings of others arbitral institutional centres, some of them are international references. The report assesses and describes the presidential powers, such as: configuration and composition of the arbitral tribunal (including arbitrator’s replacements, excuses and refusals); deadline extensions; determination of procedural rules and decision-making on any procedural incidents which arise before the constitution of the arbitral tribunal; definition of arbitration costs and fees; joinder of parties and consolidation of proceedings admission; and appointment of an emergency arbitrator. Lastly, this report analyzes some decisions delivered by the President in the respective institutional procedures which took place in the Centre.

How do current term structure model behave beyond the last liquid point?: A comparison of the DNS and Smith-Wilson methods

A Work Project, presented as part of the requirements for the Award of a Master’s Double Degree in Finance from Maastricht University and NOVA – School of Business and Economics

Design and characterization of novel biopolymeric structure using biocompatible ionic liquids

The main objective of this thesis was the development of polymeric structures from the dissolution of FucoPol, a bacterial exopolysaccharide (EPS), in a biocompatible ionic liquid, choline acetate. The FucoPol was produced by the bacteria Enterobacter A47 using glycerol as carbon source at controlled temperature and pH (30ºC and 7, respectively). At the end of 3 days it was produced 7 g/L of FucoPol. The net yield of Fucopol in glycerol (YP/S) was 0.22 g/g and the maximum productivity 2.37 g/L.d This polymer was characterized about its composition in sugars and acyl groups (by High-Performance Liquid Chromatography - HPLC), containing fucose (35 % mol), galactose (21 % mol), glucose (29 % mol), rhamnose (3% mol) and glucuronic acid (12% mol) as well as acetate (14.28 % mol), pyruvate (2.15 % mol) and succinate (1.80 % mol). Its content of water and ash was 15% p/p and 2% p/p, respectively, and the chemical bonds (determined by Infrared Spectroscopy - FT-IR) are consistent to the literature reports. However, due to limitations in Differential Scanning Calorimetry (DSC) equipment it was not possible to determine the glass transition temperature. In turn, the ionic liquid showed the typical behavior of a Newtonian fluid, glass transition temperature (determined by DSC) -98.03ºC and density 1.1031 g/cm3. The study of chemical bonds by FT-IR showed that amount of water (8.80%) influenced the visualization of the bands predicted to in view of their chemical structure. After the dissolution of the FucoPol in the ionic liquid at different temperatures (50, 60, 80 and 100 ° C) it was promoted the removal of this by the phase inversion method using deionized water as a solvent, followed by drying in an oven at 70 ° C. The mixtures before and after the phase inversion method were characterized through the studies mentioned above. In order to explore possible application field’s biocompatibility assays and collage on balsa wood tests were performed. It was found that the process of washing with water by the phase inversion method was not totally effective in removing the biocompatible ionic liquid, since all FucoPol – IL mixtures still contained ionic liquid in their composition as can be seen by the DSC results and FT-IR. In addition, washing the mixtures with water significantly altered the composition of FucoPol. However, these mixtures, that developed a viscous behavior typical of a non-Newtonian fluid (shear-thinning), have the potential to be applied in the biomedical field as well as biological glues.

Does ownership structure matter? Three essays in finance

Management

The Multidimensional and Centred Structure of Our Interested Perception in Hierocles

O objectivo desta dissertação é identificar a estrutura da percepção tal como ela é desenhada por Hiérocles nos <,(#= >1!(?$%&'(). Para alcançar este objectivo focar-me-ei na análise que o filósofo estóico leva a cabo em torno da percepção. O foco começa por incindir sobre a distinção entre percepção de si e percepção do exterior, com todas as suas subtilezas. Tal análise implicará então a consideração da importância da não-indiferença nessa estrutura de percepção. O objectivo é compreender como a percepção é sempre relacional e interessada. . Centrar-me-ei então na noção de !"#$%&'(), tentanto explorar a complexidade e multiplicidade do fenómeno em causa. Será também estabalecida a relação com o fragmento de Estobeu (6.671), que é, a par da obra, a fonte mais importante do pensamento de Hiérocles. Através desta relação introduzir-se-á a estrutura circular e concêntrica de uma percepção relacional e interessada. Toda esta dissertação será levada a cabo focando-se principalmente nos textos do próprio Hiérocles.

Avaliação económica em transplantação renal : abordagem estratégica do processo de doação e análise de custo-utilidade do programa de transplantação renal versus hemodiálise

SUMÁRIO - O desafio atual da Saúde Pública é assegurar a sustentabilidade financeira do sistema de saúde. Em ambiente de recursos escassos, as análises económicas aplicadas à prestação dos cuidados de saúde são um contributo para a tomada de decisão que visa a maximização do bem-estar social sujeita a restrição orçamental. Portugal é um país com 10,6 milhões de habitantes (2011) com uma incidência e prevalência elevadas de doença renal crónica estadio 5 (DRC5), respetivamente, 234 doentes por milhão de habitantes (pmh) e 1.600 doentes/pmh. O crescimento de doenças associadas às causas de DRC, nomeadamente, diabetes Mellitus e hipertensão arterial, antecipam uma tendência para o aumento do número de doentes. Em 2011, dos 17.553 doentes em tratamento substitutivo renal, 59% encontrava-se em programa de hemodiálise (Hd) em centros de diálise extra-hospitalares, 37% viviam com um enxerto renal funcionante e 4% estavam em diálise peritoneal (SPN, 2011). A lista ativa para transplante (Tx) renal registava 2.500 doentes (SPN 2009). O Tx renal é a melhor modalidade terapêutica pela melhoria da sobrevida, qualidade de vida e relação custo-efetividade, mas a elegibilidade para Tx e a oferta de órgãos condicionam esta opção. Esta investigação desenvolveu-se em duas vertentes: i) determinar o rácio custo-utilidade incremental do Tx renal comparado com a Hd; ii) avaliar a capacidade máxima de dadores de cadáver em Portugal, as características e as causas de morte dos dadores potenciais a nível nacional, por hospital e por Gabinete Coordenador de Colheita e Transplantação (GCCT), e analisar o desempenho da rede de colheita de órgãos para Tx. Realizou-se um estudo observacional/não interventivo, prospetivo e analítico que incidiu sobre uma coorte de doentes em Hd que foi submetida a Tx renal. O tempo de seguimento mínimo foi de um ano e máximo de três anos. No início do estudo, colheram-se dados sociodemográficos e clínicos em 386 doentes em Hd, elegíveis para Tx renal. A qualidade de vida relacionada com a saúde (QVRS) foi avaliada nos doentes em Hd (tempo 0) e nos transplantados, aos três, seis, 12 meses, e depois, anualmente. Incluíram-se os doentes que por falência do enxerto renal transitaram para Hd. Na sua medição, utilizou-se um instrumento baseado em preferências da população, o EuroQol-5D, que permite o posterior cálculo dos QALY. Num grupo de 82 doentes, a QVRS em Hd foi avaliada em dois tempos de resposta o que permitiu a análise da sua evolução. Realizou-se uma análise custo-utilidade do Tx renal comparado com a Hd na perspetiva da sociedade. Identificaram-se os custos diretos, médicos e não médicos, e as alterações de produtividade em Hd e Tx renal. Incluíram-se os custos da colheita de órgãos, seleção dos candidatos a Tx renal e follow-up dos dadores vivos. Cada doente transplantado foi utilizado como controle de si próprio em diálise. Avaliou-se o custo médio anual em programa de Hd crónica relativo ao ano anterior à Tx renal. Os custos do Tx foram avaliados prospetivamente. Considerou-se como horizonte temporal o ciclo de vida nas duas modalidades. Usaram-se taxas de atualização de 0%, 3% e 5% na atualização dos custos e QALY e efetuaram-se análises de sensibilidade one way. Entre 2008 e 2010, 65 doentes foram submetidos a Tx renal. Registaram-se, prospetivamente, os resultados em saúde incluíndo os internamentos e os efeitos adversos da imunossupressão, e o consumo dos recursos em saúde. Utilizaram-se modelos de medidas repetidas na avaliação da evolução da QVRS e modelos de regressão múltipla na análise da associação da QVRS e dos custos do transplante com as características basais dos doentes e os eventos clínicos. Comparativamente à Hd, observou-se melhoria da utilidade ao 3º mês de Tx e a qualidade de vida aferida pela escala EQ-VAS melhorou em todos os tempos de observação após o Tx renal. O custo médio da Hd foi de 32.567,57€, considerado uniforme ao longo do tempo. O custo médio do Tx renal foi de 60.210,09€ no 1º ano e 12.956,77€ nos anos seguintes. O rácio custo-utilidade do Tx renal vs Hd crónica foi de 2.004,75€/QALY. A partir de uma sobrevivência do enxerto de dois anos e cinco meses, o Tx associou-se a poupança dos custos. Utilizaram-se os dados nacionais dos Grupos de Diagnóstico Homogéneos e realizou-se um estudo retrospectivo que abrangeu as mortes ocorridas em 34 hospitais com colheita de órgãos, em 2006. Considerou-se como dador potencial o indivíduo com idade entre 1-70 anos cuja morte ocorrera a nível hospitalar, e que apresentasse critérios de adequação à doação de rim. Analisou-se a associação dos dadores potenciais com características populacionais e hospitalares. O desempenho das organizações de colheita de órgãos foi avaliado pela taxa de conversão (rácio entre os dadores potenciais e efetivos) e pelo número de dadores potenciais por milhão de habitantes a nível nacional, regional e por Gabinete Coordenador de Colheita e Transplantação (GCCT). Identificaram-se 3.838 dadores potenciais dos quais 608 apresentaram códigos da Classificação Internacional de Doenças, 9.ª Revisão, Modificações Clínicas (CID- 9-MC) que, com maior frequência, evoluem para a morte cerebral. O modelo logit para dados agrupados identificou a idade, o rácio da lotação em Unidades de Cuidados Intensivos e lotação de agudos, existência de GCCT e de Unidade de Transplantação, e mortalidade por acidente de trabalho como fatores preditivos da conversão dum dador potencial em efetivo e através das estimativas do modelo logit quantificou-se a probabilidade dessa conversão. A doação de órgãos deve ser assumida como uma prioridade e as autoridades em saúde devem assegurar o financiamento dos hospitais com programas de doação, evitando o desperdício de órgãos para transplantação, enquanto um bem público e escasso. A colheita de órgãos deve ser considerada uma opção estratégica da atividade hospitalar orientada para a organização e planeamento de serviços que maximizem a conversão de dadores potenciais em efetivos incluindo esse critério como medida de qualidade e efetividade do desempenho hospitalar. Os resultados deste estudo demonstram que: 1) o Tx renal proporciona ganhos em saúde, aumento da sobrevida e qualidade de vida, e poupança de custos; 2) em Portugal, a taxa máxima de eficácia da conversão dos dadores cadavéricos em dadores potenciais está longe de ser atingida. O investimento na rede de colheita de órgãos para Tx é essencial para assegurar a sustentabilidade financeira e promover a qualidade, eficiência e equidade dos cuidados em saúde prestados na DRC5.

Inovcity- Structure of trials evaluation

In 2007, the UK government commissioned the Energy Demand Research Project to conduct a large scale experiment of smart metering technologies to test the impacts from many different forms of feedback to residential consumers. A full evaluation of the results was completed in 2011. In Portugal, EDP is also conducting smart meter trials in a project called InovCity in the city of Évora whose results will be evaluated during 2012. In this work, the case of Great Britain is studied as a reference on how an evaluation of trial results should be conducted. I also discuss potential limitations of the experiments, implications for national roll-out decisions, and finally draw some lessons that can be applied to the Portuguese case.

Quadrature generators based on ring oscillators and shift registers

Quadrature oscillators are key elements in modern radio frequency (RF) transceivers and very useful nowadays in wireless communications, since they can provide: low quadrature error, low phase-noise, and wide tuning range (useful to cover several bands). RC oscillators can be fully integrated without the need of external components (external high Q-inductors), optimizing area, cost, and power consumption. The conventional structure of ring oscillator offers poor frequency stability and phasenoise, low quality factor (Q), and besides being vulnerable to process, voltage and temperature (PVT) variations, its performance degrades as the frequency of operation increases. This thesis is devoted to quadrature oscillators and presents a detailed comparative study of ring oscillator and shift register (SR) approaches. It is shown that in SRs both phase-noise and phase error are reduced, while ring oscillators have the advantage of occupying less area and less consumption due to the reduced number of components in the circuit. Thus, although ring oscillators are more suitable for biomedical applications, SRs are more appropriate for wireless applications, especially when specification requirements are more stringent and demanding. The first architecture studied consists in a simple CMOS ring oscillator employing an odd number of static single-ended inverters as delay cells. Subsequently, the quadrature 4-stage ring oscillator concept is shown and post-layout simulations are presented. The 3 and 4-phase single-frequency local oscillator (LO) generators employing SRs are presented, the latter with 50% and 25% duty-cycles. The circuits operate at 600 MHz and 900 MHz, and were designed in a 130 nm standard CMOS technology with a voltage supply of 1.2 V.

Proposal of a methodology for the design of the installation of turrets on aircrafts – the approach on the aerodynamic influences

The present work has its origin on the necessity of enabling a design certified company, or DOA (Design Organization Approval), to perform a modification; this modification is the installation of EO/IR (Electro-optical infrared) sensors on aircrafts. The subject of interest in this dissertation lies on the aerodynamic impact of the modification on the aircraft. The primary purpose of the present thesis is the creation of a methodology that regards the design stage of the modification. This methodology serves as guidance to the DOA design team that is assigned to the design of the modification. The methodology includes a recommendation to the certification of the modification; it contains a method intended to decide the location of the installation of the sensors on the aircraft; it also comprises of a design structure specifically adapted to the modification in study. Regarding the aerodynamic impact, it is studied the aerodynamic analysis’ tools, which allows one to relate the different stages of design to the most suited tools to each stage. A case study is performed with the purpose of not only validating the methodology which was created but also to giving a first approach to the preliminary design of the modification. As example, there are used the Lockheed Martin C-130 aircraft and the FLIR Star Safire III sensor.

Impact of chromossomal structure on the evolution of Schizosaccharomyces pombe undergoing Mutation Accumulation

Large chromosomal rearrangements are common in natural populations and thought to be involved in speciation events. In this project, we used experimental evolution to determine how the speed of evolution and the type of accumulated mutations depend on the ancestral chromosomal structure and genotype. We utilized two Wild Type strains and a set of genetically engineered Schizosaccharomyces pombe strains, different solely in the presence of a certain type of chromosomal variant (inversions or translocations), along with respective controls. Previous research has shown that these chromosomal variants have different fitness levels in several environments, probably due to changes in the gene expression along the genome. These strains were propagated in the laboratory at very low population sizes, in which we expect natural selection to be less efficient at purging deleterious mutations. We then measured these strains’ changes in fitness throughout this accumulation of deleterious mutations, comparing the evolutionary trajectories in the different rearrangements to understand if the chromosomal structure affected the speed of evolution. We also tested these mutations for possible epistatic effects and estimated their parameters: the number of arising deleterious mutations per generation (Ud) and each one’s mean effect (sd).

Phage display as a tool for generation of bio-therapeutic agents for breast cancer

Notch is a conserved signalling pathway, which plays a crucial role in a multiple cellular processes such as stem cell self-renewal, cell division, proliferation and apoptosis. In mammalian, four Notch receptors and five ligands are described, where interaction is achieved through their extracellular domains, leading to a transcription activation of different target genes. Increased expression of Notch ligands has been detected in several types of cancer, including breast cancer suggesting that these proteins represent possible therapeutic targets. The goal of this work was to generate quality protein targets and, by phage display technology, select function-blocking antibodies specific for Notch ligands. Phage display is a powerful technique that allows the generation of highly specific antibodies to be used for therapeutics, and it has also proved to be a reliable approach in identifying and validating new cancer-related targets. Also, we aimed at solving the tri-dimensional structure of the Notch ligands alone and in complex with selected antibodies. In this work, the initial phase focused on the optimization of the expression and purification of a human Delta-like 1 ligand mutant construct (hDLL1-DE3), by refolding from E. coli inclusion bodies. To confirm the biological activity of the produced recombinant protein cellular functional studies were performed, revealing that treatment with hDLL1-DE3 protein led to a modulation of Notch target genes. In a second stage of this study, Antibody fragments (Fabs) specific for hDLL1-DE3 were generated by phage display, using the produced protein as target, in which one good Fab candidate was selected to determine the best expression conditions. In parallel, multiple crystallization conditions were tested with hDLL1-DE3, but so far none led to positive results.

Wideband CMOS low noise amplifiers

Modern fully integrated receiver architectures, require inductorless circuits to achieve their potential low area, low cost, and low power. The low noise amplifier (LNA), which is a key block in such receivers, is investigated in this thesis. LNAs can be either narrowband or wideband. Narrowband LNAs use inductors and have very low noise figure, but they occupy a large area and require a technology with RF options to obtain inductors with high Q. Recently, wideband LNAs with noise and distortion cancelling, with passive loads have been proposed, which can have low NF, but have high power consumption. In this thesis the main goal is to obtain a very low area, low power, and low-cost wideband LNA. First, it is investigated a balun LNA with noise and distortion cancelling with active loads to boost the gain and reduce the noise figure (NF). The circuit is based on a conventional balun LNA with noise and distortion cancellation, using the combination of a common-gate (CG) stage and common-source (CS) stage. Simulation and measurements results, with a 130 nm CMOS technology, show that the gain is enhanced by about 3 dB and the NF is reduced by at least 0.5 dB, with a negligible impact on the circuit linearity (IIP3 is about 0 dBm). The total power dissipation is only 4.8 mW, and the active area is less than 50 x 50 m2 . It is also investigated a balun LNA in which the gain is boosted by using a double feedback structure.We propose to replace the load resistors by active loads, which can be used to implement local feedback loops (in the CG and CS stages). This will boost the gain and reduce the noise figure (NF). Simulation results, with the same 130 nm CMOS technology as above, show that the gain is 24 dB and NF is less than 2.7 dB. The total power dissipation is only 5.4 mW (since no extra blocks are required), leading to a figure-of-merit (FoM) of 3.8 mW

Orthogonal models, structure crossing, nesting and inference

We intend to study the algebraic structure of the simple orthogonal models to use them, through binary operations as building blocks in the construction of more complex orthogonal models. We start by presenting some matrix results considering Commutative Jordan Algebras of symmetric matrices, CJAs. Next, we use these results to study the algebraic structure of orthogonal models, obtained by crossing and nesting simpler ones. Then, we study the normal models with OBS, which can also be orthogonal models. We intend to study normal models with OBS (Orthogonal Block Structure), NOBS (Normal Orthogonal Block Structure), obtaining condition for having complete and suffcient statistics, having UMVUE, is unbiased estimators with minimal covariance matrices whatever the variance components. Lastly, see ([Pereira et al. (2014)]), we study the algebraic structure of orthogonal models, mixed models whose variance covariance matrices are all positive semi definite, linear combinations of known orthogonal pairwise orthogonal projection matrices, OPOPM, and whose least square estimators, LSE, of estimable vectors are best linear unbiased estimator, BLUE, whatever the variance components, so they are uniformly BLUE, UBLUE. From the results of the algebraic structure we will get explicit expressions for the LSE of these models.

Relatório de estágio curricular no Centro de Arbitragem Comercial da Câmara de Comércio e Indústria portuguesa

This report is the outcome of an internship that took place in Centro de Arbitragem Comercial da Câmara de Comércio e Indústria Portuguesa and its completion is an essential part of the path towards obtaining the Master’s Degree in Faculdade de Direito da Universidade Nova de Lisboa. This report has been structured in two stages – firstly, the presentation of the Centro de Arbitragem Comercial, focusing on its field of expertise, organic structure, principles and advantages. Then, the description of the activities developed within the Secretariat over the several stages of the arbitration procedure – since the reception of the arbitration requirement in institutional proceedings, terms of reference in ad hoc procedures, through the monitoring of the arbitral tribunal sessions (preliminary hearings, submission of evidence and final allegations) and the notification of the arbitration award. The second stage of this report is related to the description of the functions and powers of the President of Centro de Arbitragem Comercial. Firstly, it defines those powers by analyzing the statutes and rules of proceedings of the Centro de Arbitragem, drawing comparisons between the above mention and the rules of proceedings of others arbitral institutional centres, some of them are international references. The report assesses and describes the presidential powers, such as: configuration and composition of the arbitral tribunal (including arbitrator’s replacements, excuses and refusals); deadline extensions; determination of procedural rules and decision-making on any procedural incidents which arise before the constitution of the arbitral tribunal; definition of arbitration costs and fees; joinder of parties and consolidation of proceedings admission; and appointment of an emergency arbitrator. Lastly, this report analyzes some decisions delivered by the President in the respective institutional procedures which took place in the Centre.