Determination of the most suitable oil pipeline route using GIS least cost path analysis

The Keystone XL has a big role for transforming Canadian oil to the USA. The function of the pipeline is decreasing the dependency of the American oil industry on other countries and it will help to limit external debt. The proposed pipeline seeks the most suitable route which cannot damage agricultural and natural water recourses such as the Ogallala Aquifer. Using the Geographic Information System (GIS) techniques, the suggested path in this study got extremely high correct results that will help in the future to use the least cost analysis for similar studies. The route analysis contains different weighted overlay surfaces, each, was influenced by various criteria (slope, geology, population and land use). The resulted least cost path routes for each weighted overlay surface were compared with the original proposed pipeline and each displayed surface was more effective than the proposed Keystone XL pipeline.

Photochemical degradation of triclosan: a comparison between different light sources

New emerging contaminants could represent a danger to the environment and Humanity with repercussions not yet known. One of the major worldwide pharmaceutical and personal care productions are antimicrobials products, triclosan, is an antimicrobial agent present in most products. Despite the high removal rate of triclosan present in wastewater treatments, triclosan levels are on the rise in the environment through disposal of wastewater effluent and use of sewage sludge in land application. Regulated in the EC/1272/2008 (annex VI, table 3.1), this compound is considered very toxic to aquatic life and it has been reported that photochemical transformation of triclosan produces dioxins. In the current work it was defined three objectives; determination of the most efficient process in triclosan degradation, recurring to photochemical degradation methods comparing different sources of light; identification of the main by-products formed during the degradation and the study of the influence of the Fenton and photo-Fenton reaction. Photochemical degradation methods such as: photocatalysis under florescent light (UV), photocatalysis under visible light (sunlight), photocatalysis under LEDs, photo-Fenton and Fenton reaction have been compared in this work. The degradation of triclosan was visualized through gas chromatography/mass spectrometry (GC/MS). In this study photo-Fenton reaction has successfully oxidized triclosan to H2O and CO2 without any by-products within 2 hours. Photocatalysis by titanium dioxide (TiO2) under LEDs was possible, having a degradation rate of 53% in an 8 hours essay. The degradation rate of the Fenton reaction, UV light and sunlight showed degradation between 90% and 95%. The results are reported to the data observed without statistic support, since this was not possible during the work period. Hydroquinone specie and 2,4-dichlorophenol by-products were identified in the first hour of photocatalysis by UV. A common compound, possibly identified has C7O4H , was present at the degradation by UV, sunlight and LEDs and was concluded to be a contaminant. In the future more studies in the use of LEDs should be undertaken given the advantages of long durability and low consumption of energy of these lamps and that due to their negative impact on the environment fluorescent lamps are being progressively made unavailable by governments, requiring new solutions to be found. Fenton and photo-Fenton reactions can also be costly processes given the expensive reagents used.

Rebalancing frequency and the welfare cost of inflation

Cash-in-advance models usually require agents to reallocate money and bonds in fixed periods. Every month or quarter, for example. I show that fixed periods underestimate the welfare cost of inflation. I use a model in which agents choose how often they exchange bonds for money. In the benchmark specification, the welfare cost of 10 percent instead of 0 inflation increases from 0.1 percent of income with fixed periods to 1 percent with optimal periods. The results are robust to different references, to different compositions of income in bonds or money, and to the introduction of capital and labor.

Seat in China

Currently, China has the biggest automobile industry in the world. China’s economic situation helped the automobile market, as the internal demand of passenger cars increased substantially in the last years. Chinese automobile industry’s astonishing expansion over the past years has attracted many foreign automobile groups. SEAT decided to enter the Chinese market, following its expansion strategy to enter new markets. The purpose of this study is to analyse and understand the strategic entry of SEAT in the Chinese market, hence the choice of an explanatory case study (Yin, 2003). This study extends this analysis by examining the chines automobile market, more specifically the demand, the market segmentation and the intensity of competition, reviewing the SEAT company history, their competitive positioning and resources. I conclude that, although the Chinese market has growing potential, SEAT has failed to achieve its initial objective. The company has not been able to create a brand awareness in the Chinese market, unlike other foreign brands that have managed to accomplish that. This occurred, mostly, because of the high prices in comparison to its competitors due to additional import cost, such as import duties, transportation and distribution.

Cost-to-serve customers’ optimization: Macro project Unilever – Jerónimo Martins

The objective of this work project is to analyse and discuss the importance of the “Cost to Serve” as a differentiation key factor, by accessing cost to serve customers of a Portuguese subsidiary of a multinational company, which is operating in the sector of fast moving consumer goods (FMCG) – Unilever – Jerónimo Martins (UJM). I will also suggest and quantify key proposals to decrease costs and increase customers’ value. Hence, the scope of this work project is focused on logistics and distribution processes of the company supply chain.

Market risk charge of the trading book: a comparison of the Basel II and Basel III

This paper aims to investigate if the market capital charge of the trading book increased in Basel III compared to Basel II. I showed that the capital charge rises by 232% and 182% under the standardized and internal model, respectively. The varying liquidity horizons, the calibration to a stress period, the introduction of credit spread risk, the restrictions on correlations across risk categories and the incremental default charge boost Basel III requirements. Nevertheless, the impact of Expected shortfall at 97.5% is low and long term shocks decrease the charge. The standardized approach presents advantages and disadvantages relative to internal models.

How do current term structure model behave beyond the last liquid point?: A comparison of the DNS and Smith-Wilson methods

A Work Project, presented as part of the requirements for the Award of a Master’s Double Degree in Finance from Maastricht University and NOVA – School of Business and Economics

Low cost carriers: The case of Oporto Airport and its touristic impact in the region

Both Oporto and the North Region of Portugal definitions of tourism have evolved significantly during the past decade. In this journey it is relevant to highlight the contribution of the arrival of Low Cost Carriers (LCCs) at Francisco Sá Carneiro Airport, thus contributing to a rapid expansion of this region as a tourism destination. Hence, this work project aims to understand the touristic and economic impact motivated by the entry of LCCs in Oporto and in the North Region of Portugal and tries to understand if this event was in fact an asset in the development of the aforementioned tourism destinations.

The economic valuation of noise reduction projects: A cost-benefit analysis approach

The main purpose of this Work Project consists in performing a practical Cost-Benefit Analysis from a social perspective of two noise reduction projects in industrial sites that aim at complying with the existing regulation. By doing so, one may expect a more comprehensive view of the benefits and costs of both projects, as well as relevant insight to the way noise exposure regulation must be optimally defined in Portugal and within the EU area.

The impact of online promotional efforts on customer acquisitiom and retention at continente.pt

Continente Online (COL) is the market leader of online grocery retailing in Portugal. Aiming at sustaining this position, it has been focusing its promotional efforts in acquiring and retaining customers. This report intakes an extensive study on the impact of COL’s exclusive promotional efforts (free delivery offers and ten percent discounts on loyalty card) on customer acquisition and retention, as well as, a cost analysis on these offers. Two econometric models were developed and the results were interesting. It was concluded that free delivery offers have a significant impact both in terms of customer acquisition and retention, having also a lower cost in comparison with ten percent on loyalty card discounts.

Return on equity: A comparison between companies in Portugal and Brazil: Similarities and differences

The purpose of this research is to study the Return on Equity of Portuguese and Brazilian companies, through the DuPont method. This project analyses whether differences in the ratios depend on specific features of the country, or if it is influenced by the industry where it is located. From the comparisons it is concluded that Brazilian companies pay higher corporate taxes and while the Portuguese companies are more leveraged, it is the Brazilian companies which pay higher interests. It is also noticeable that Portuguese companies take more advantage from the financing decisions and Brazilian on the investing decisions.

Implementação da Equipa de Emergência Médica Intra-hospitalar nos hospitais do Serviço Nacional de Saúde : análise de custo-efetividade perante a incidência da paragem cárdio-respiratória intra-hospitalar

RESUMO - Introdução: No âmbito das emergências intra-hospitalares investigou-se a hipótese da presença da Equipa Emergência Médica Intra-hospitalar (EEMI) (DGS, 2010) num Centro Hospitalar (CH), contribuir para a redução do número de mortos por Paragem Cárdiorespiratória (PCR) intra-hospitalar, quando comparado com outro CH dotado de uma equipa tradicional de resposta à PCR. Metodologia: Tratou-se de um estudo observacional, retrospetivo (2010 a 2014), com base nos dados do Grupo de Diagnóstico Homogéneo (GDH), analisado numa perspetiva de custo-efetividade no impacto sobre incidência de PCR e taxa de mortalidade. Resultados: Observou-se que o CH com EEMI apresentou uma Redução Risco Absoluto (RRA) de 9,01% de morte por PCR. A taxa de mortalidade calculada foi de 2,82 casos por 1000 episódios de internamento em que a incidência de PCR foi de 28,24 casos por cada 10 000 habitantes, duas vezes menor que CH em comparação. Quando introduzidas manobras de Ressuscitação Cárdiopulmonar (RCP), o mesmo CH teve um maior número de PCR revertidas, com uma taxa de mortalidade 2 vezes menor que o CH sem EEMI. Conclusão: Resultados demonstraram que os dois CH apresentaram riscos diferentes, em que a probabilidade do doente hospitalizado de morrer após ocorrência de PCR foi menor no grupo exposto à EEMI, com OR = 0,496 [IC 95% (0,372 a 0,662)] para dados populacionais (p = 0,0013), e OR = 0,618 [IC 95% (0,298 a 1,281)] para dados individuais, (p = 0,194). Face a melhores resultados em Saúde, considerou-se a implementação da EEMI, uma medida custo-efetiva, uma vez que o principal requisito traduz-se por reorganização das equipas tradicionais para uma vertente de prevenção da PCR.

Integração vertical de cuidados : o impacto nos custos do internamento hospitalar

RESUMO - Introdução: A integração vertical de cuidados surge em Portugal em 1999 com a criação da primeira Unidade Local de Saúde (ULS) em Matosinhos. Este modelo de gestão tem como principal objetivo reorganizar o sistema para responder de forma mais custo-efetiva às necessidades atuais. Objetivo: Analisar o impacto da criação das ULS nos custos do internamento hospitalar português. Metodologia: Para apurar o custo médio estimado por episódio de internamento hospitalar utilizou-se a metodologia dos Custos Estimados com base na Contabilidade Analítica. Contudo, não foram imputados custos por diária de internamento por centro de produção, mas apenas por doente saído em determinado hospital. Para efeitos de comparação dos modelos de gestão organizacionais consideraram-se variáveis demográficas e variáveis de produção. Resultados: Da análise global, os hospitais integrados em ULS apresentam um custo médio estimado por episódio de internamento inferior quando comparados com os restantes. Em 2004 os hospitais sem modelo de integração vertical de cuidados apresentam uma diferença de custos de aproximadamente 714,00€. No ano 2009, último ano em análise, esta diferença é mais ténue situando-se nos 232,00€ quando comparados com hospitais integrados em ULS. Discussão e Conclusão: Não existe uma tendência definida no que respeita à diferença de custos quando se comparam os diferentes modelos organizacionais. É importante que em estudos futuros se alargue a amostra ao total de prestadores e se aprofundem os fatores que influênciam os custos de internamento. A compreensão dos indicadores sociodemográficos, demora média, e produção realizada, numa ótica de custo efetividade e qualidade, permitirá resultados com menor grau de viés.

Switching mode power amplifier for bluetooth applications

Modern fully integrated transceivers architectures, require circuits with low area, low cost, low power, and high efficiency. A key block in modern transceivers is the power amplifier, which is deeply studied in this thesis. First, we study the implementation of a classical Class-A amplifier, describing the basic operation of an RF power amplifier, and analysing the influence of the real models of the reactive components in its operation. Secondly, the Class-E amplifier is deeply studied. The different types of implementations are reviewed and theoretical equations are derived and compared with simulations. There were selected four modes of operation for the Class-E amplifier, in order to perform the implementation of the output stage, and the subsequent comparison of results. This led to the selection of the mode with the best trade-off between efficiency and harmonics distortion, lower power consumption and higher output power. The optimal choice was a parallel circuit containing an inductor with a finite value. To complete the implementation of the PA in switching mode, a driver was implemented. The final block (output stage together with the driver) got 20 % total efficiency (PAE) transmitting 8 dBm output power to a 50 W load with a total harmonic distortion (THD) of 3 % and a total consumption of 28 mW. All implementations are designed using standard 130 nm CMOS technology. The operating frequency is 2.4 GHz and it was considered an 1.2 V DC power supply. The proposed circuit is intended to be used in a Bluetooth transmitter, however, it has a wider range of applications.

Building 3D City Models: Testing and Comparing Laser Scanning and Low-Cost UAV Data Using FOSS Technologies

Contém resumo