Urban containment: An effective tool for environmental protection?

This paper examines the effectiveness of urban containment policies to protect forestland from residential conversion and to increase the provision of forest public goods in the presence of irreversible investments and policy uncertainty. We develop a model of a single landowner that allows for switching between competing land uses (forestry and residential use) at some point in the future. Our results show that urban containment policies can protect (even if temporarily) forestland from being developed but must be supplemented with policies that influence the length and number of harvesting cycles if the goal is to increase nontimber benefits. The threat of a development prohibition creates incentives for preemptive timber harvesting and land conversion. In particular, threatened regulation creates an incentive to shorten rotation cycles to avoid costly land-use restrictions. However, it has an ambiguous effect on forestland conversion as the number of rotation cycles can also be adjusted to maximize the expected returns to land. Finally, in the presence of irreversibility, forestland conversion decisions should be done using real option theory rather than net present value analysis

Negotiation environment to support enterprise interoperability sustainability

Dissertation to obtain the Master degree in Electrical Engineering and Computer Science

Analysis of urban land use and land cover changes: a case of study in Bahir Dar, Ethiopia

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies

Sustainability and consumer responses: The effect of bad industry reputation and fit

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Socio-ethnic segregation and sustainable urban city planning in Lisbon

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Ecologia Humana e Problemas Sociais Contemporâneos

Development of a satellite based PM10 concentration product for urban areas

Dissertação para obtenção do Grau de Doutor em Engenharia do Ambiente

Application of geographic information system and modelling in health impact assessment for urban road mobility in Vietnam

Transport is an essential sector in modern societies. It connects economic sectors and industries. Next to its contribution to economic development and social interconnection, it also causes adverse impacts on the environment and results in health hazards. Transport is a major source of ground air pollution, especially in urban areas, and therefore contributing to the health problems, such as cardiovascular and respiratory diseases, cancer, and physical injuries. This thesis presents the results of a health risk assessment that quantifies the mortality and the diseases associated with particulate matter pollution resulting from urban road transport in Hai Phong City, Vietnam. The focus is on the integration of modelling and GIS approaches in the exposure analysis to increase the accuracy of the assessment and to produce timely and consistent assessment results. The modelling was done to estimate traffic conditions and concentrations of particulate matters based on geo-references data. A simplified health risk assessment was also done for Ha Noi based on monitoring data that allows a comparison of the results between the two cases. The results of the case studies show that health risk assessment based on modelling data can provide a much more detail results and allows assessing health impacts of different mobility development options at micro level. The use of modeling and GIS as a common platform for the integration of different assessments (environmental, health, socio-economic, etc.) provides various strengths, especially in capitalising on the available data stored in different units and forms and allows handling large amount of data. The use of models and GIS in a health risk assessment, from a decision making point of view, can reduce the processing/waiting time while providing a view at different scales: from micro scale (sections of a city) to a macro scale. It also helps visualising the links between air quality and health outcomes which is useful discussing different development options. However, a number of improvements can be made to further advance the integration. An improved integration programme of the data will facilitate the application of integrated models in policy-making. Data on mobility survey, environmental monitoring and measuring must be standardised and legalised. Various traffic models, together with emission and dispersion models, should be tested and more attention should be given to their uncertainty and sensitivity

Land cover mapping analysis and urban growth modeling using remote sensing techniques

The rapid growth of big cities has been noticed since 1950s when the majority of world population turned to live in urban areas rather than villages, seeking better job opportunities and higher quality of services and lifestyle circumstances. This demographic transition from rural to urban is expected to have a continuous increase. Governments, especially in less developed countries, are going to face more challenges in different sectors, raising the essence of understanding the spatial pattern of the growth for an effective urban planning. The study aimed to detect, analyse and model the urban growth in Greater Cairo Region (GCR) as one of the fast growing mega cities in the world using remote sensing data. Knowing the current and estimated urbanization situation in GCR will help decision makers in Egypt to adjust their plans and develop new ones. These plans should focus on resources reallocation to overcome the problems arising in the future and to achieve a sustainable development of urban areas, especially after the high percentage of illegal settlements which took place in the last decades. The study focused on a period of 30 years; from 1984 to 2014, and the major transitions to urban were modelled to predict the future scenarios in 2025. Three satellite images of different time stamps (1984, 2003 and 2014) were classified using Support Vector Machines (SVM) classifier, then the land cover changes were detected by applying a high level mapping technique. Later the results were analyzed for higher accurate estimations of the urban growth in the future in 2025 using Land Change Modeler (LCM) embedded in IDRISI software. Moreover, the spatial and temporal urban growth patterns were analyzed using statistical metrics developed in FRAGSTATS software. The study resulted in an overall classification accuracy of 96%, 97.3% and 96.3% for 1984, 2003 and 2014’s map, respectively. Between 1984 and 2003, 19 179 hectares of vegetation and 21 417 hectares of desert changed to urban, while from 2003 to 2014, the transitions to urban from both land cover classes were found to be 16 486 and 31 045 hectares, respectively. The model results indicated that 14% of the vegetation and 4% of the desert in 2014 will turn into urban in 2025, representing 16 512 and 24 687 hectares, respectively.

Identifying the urban communities of New York City using bikeshare data from NYC citibike

This study identifies a measure of the cultural importance of an area within a city. It does so by making use of origindestination trip data and the bike stations of the bike share system in New York City as a proxy to study the city. Rarely is movement in the city studied at such a small scale. The change in strength of the similarity of movement between each station is studied. It is the first study to provide this measure of importance for every point in the system. This measure is then related to the characteristics which make for vibrant city communities, namely highly mixed land use types. It reveals that the spatial pattern of important areas remains constant over differing time periods. Communities are then characterised by the land uses surrounding these stations with high measures of importance. Finally it identifies the areas of global cultural importance alongside the areas of local importance to the city.

Pedestrian Priority Zones in the Context of Urban Mobility and Valorization of Public Space

The second half of the XX century was marked by a great increase in the number of people living in cities. Urban agglomerations became poles of attraction for migration flows and these phenomena, coupled with growing car-ownership rates, resulted in the fact that modern transport systems are characterized by large number of users and traffic modes. The necessity to organize these complex systems and to provide space for different traffic modes changed the way cities look. Urban areas had to cope with traffic flows, and as a result nowadays typical street pattern consists of a road for motorized vehicles, a cycle lane (in some cases), pavement for pedestrians, parking and a range of crucial signage to facilitate navigation and make mobility more secure. However, this type of street organization may not be desirable in certain areas, more specifically, in the city centers. Downtown areas have always been places where economic, leisure, social and other types of facilities are concentrated, not surprisingly, they often attract large number of people and this frequently results in traffic jams, air and noise pollution, thus creating unpleasant environment. Besides, excessive traffic signage in central locations can harm the image and perception of a place, this relates in particular to historical centers with architectural heritage.

To what extent do aspects of sustainability impact established firms' resilience

An organizations´ level of sustainability has so far been primarily been analyzed within the context of economic performance. This study changes that dependent variable to “resilience”, namely a company’s ability to recover from potential lethal shocks or disruptive events. The research questions aims to investigate whether sustainability and resilience are related. This study utilizes the financial crisis from 2007/08 as disruptive event, as it encompassed market phase-out but also survival by established firms. Two Swiss luxury watchmaking companies have been chosen as industry sample and the study’s investigation is based on a comparative case study approach. The latter applies both quantitative data, in the form of the respective annual company reports, and qualitative data, in the form of semi-structured interviews with three stakeholder groups. Findings indicate that the investigated measures of sustainability are related the investigated companies’ level of resilience. These findings contribute to the building of new theory towards resilience as this study outlines specifically which measures have been proven to be of relevance for companies’ resilience. Moreover, the results are of high relevance for companies that are operating in constant evolving markets and struggling adapting to any disruptive environment as it is outlined why and how comparative companies have to be sustainable in order to become more resilient towards future shocks.

Gallo Worldwide: Sustainability of competitive position in Brazil

Case Study

The effect of social and environmental sustainability on firm resilience

Double degree

Environmental sustainability adoption

Double degree