Couch & Brunch: The breakfast chain business model

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Kids nature camp

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Lean performance measures in a supply chain

Dissertação para obtenção do Grau de Mestre em Engenharia e Gestão Industrial

Supply chain integration model: practices and customer values

Dissertation to obtain PhD in Industrial Engineering

Synthesis and characterization of sugar containing hydrophilic and hydrophobic polymers with potential application in medicine

Dissertation toobtaina Master of Science degree in Bioorganics

Design and characterization of Chitin- Glucan polymeric structures for wound dressing materials

The main objective of this work was the development of polymeric structures, gel and films, generated from the dissolution of the Chitin-Glucan Complex (CGC) in biocompatible ionic liquids for biomedical applications. Similar as chitin, CGC is only soluble in some special solvents which are toxic and corrosive. Due to this fact and the urgent development of biomedical applications, the need to use biocompatible ionic liquids to dissolve the CGC is indispensable. For the dissolution of CGC, the biocompatible ionic liquid used was Choline acetate. Two different CGC’s, KiOnutrime from KitoZyme and biologically produced CGC from Faculdade de Ciencias e Tecnologia (FCT) - Universidade Nova de Lisboa, were characterized in order to develop biocompatible wound dressing materials. The similar result is shown in term of the ratio of chitin:glucan, which is 1:1.72 for CGC-FCT and 1:1.69 for CGC-Commercial. For the analysis of metal element content, water and inorganic salts content and protein content, both polymers showed some discrepancies, where the content in CGC-FCT is always higher compared to the commercial one. The different characterization results between CGC-FCT and CGC-Commercial could be addressed to differences in the purification method, and the difference of its original strain yeast, whereas CGC-FCT is derived from P.pastoris and the commercial CGC is from A.niger. This work also investigated the effect of biopolymers, temperature dissolution, non-solvent composition on the characteristics of generated polymeric structure with biocompatible ionic liquid. The films were prepared by casting a polymer mixture, immersion in a non-solvent, followed by drying at ambient temperature. Three different non-solvents were tested in phase inversion method, i.e. water, methanol, and glycerol. The results indicate that the composition of non-solvent in the coagulation bath has great influence in generated polymeric structure. Water was found to be the best coagulant for producing a CGC polymeric film structure. The characterizations that have been done include the analysis of viscosity and viscoelasticity measurement, as well as sugar composition in the membrane and total sugar that was released during the phase inversion method. The rheology test showed that both polymer mixtures exhibit a non- Newtonian shear thinning behaviour. Where the viscosity and viscoelasticity test reveal that CGCFCT mixture has a typical behaviour of a viscous solution with entangled polymer chains and CGCCommercial mixture has true gel behaviour. The experimental results show us that the generated CGC solution from choline acetate could be used to develop both polymeric film structure and gel. The generated structures are thermally stable at 100° C, and are hydrophilic. The produced films have dense structure and mechanical stabilities against puncture up to 60 kPa.

Gold nanoparticles for plasmid delivery

Gene therapy presents an ideal strategy for the treatment of genetic as well as acquired diseases, such as cancer and typically involves the insertion of a functioning gene into cells to correct a cellular dysfunction or to provide a new cellular function. Gene delivery vectors are based in two models: viral and non-viral. Viral vectors have high transfection efficiency but their major barrier is immunogenicity. Since the non-viral vectors have no immunogenicity, these have been widely studied. Gold nanoparticles have been proposed as optimal delivery systems of genetic material, due their small size, high surface-to-volume ratio and the ability to be functionalized with multiple molecules. In the present work, an AuNP-based formulation was developed to deliver a plasmid in a colorectal cancer cell line, containing as reporter gene the gene encoding to EGFP. The delivery system resulted from the functionalization of 14 nm AuNP with a PEG layer (4300114 PEG chains/AuNP), which increases stability and biocompatibility of AuNPs; quaternary ammonium groups which provide positive charges that allow electrostatic binding of plasmid, which is considered the therapeutic agent to be transported into cells. The system developed was characterized by UV-vis spectroscopy, DLS, TEM and by electrophoretic mobility, yielding a formulation with 113.5 nm.Transfection efficiency of the formulation developed was evaluated through PCR and through EGFP expression by fluorescence microscopy and fluorescence spectroscopy. The internalization was observed 3h post transfection; however a low level of EGFP expression was achieved. After 24h of incubation, EGFP expression increases just 3 times compared to non-transfected cells. The commercial system (Lipofectamine) expressed EGFP 5 times more than the system developed AuNP@PEG@R4N+@pEGFP. This difference could be related to lower translocation to the nucleus.

Influence of Lean and Green on supply chain performance: an interpretive structural modelling model

This work aims to identify and rank a set of Lean and Green practices and supply chain performance measures on which managers should focus to achieve competitiveness and improve the performance of automotive supply chains. The identification of the contextual relationships among the suggested practices and measures, was performed through literature review. Their ranking was done by interviews with professionals from the automotive industry and academics with wide knowledge on the subject. The methodology of interpretive structural modelling (ISM) is a useful methodology to identify inter relationships among Lean and Green practices and supply chain performance measures and to support the evaluation of automotive supply chain performance. Using the ISM methodology, the variables under study were clustered according to their driving power and dependence power. The ISM methodology was proposed to be used in this work. The model intends to provide a better understanding of the variables that have more influence (driving variables), the others and those which are most influenced (dependent variables) by others. The information provided by this model is strategic for managers who can use it to identify which variables they should focus on in order to have competitive supply chains.

40 K Neon liquid energy storage unit

Cryocoolers have been progressively replacing the use of the stored cryogens in cryogenic chains used for detector cooling, thanks to their higher and higher reliability. However, the mechanical vibrations, the electromagnetic interferences and the temperature fluctuations inherent to their functioning could reduce the sensor’s sensitivity. In order to minimize this problem, compact thermal energy storage units (ESU) are studied, devices able to store thermal energy without significant temperature increase. These devices can be used as a temporary cold source making it possible to turn the cryocooler OFF providing a proper environment for the sensor. A heat switch is responsible for the thermal decoupling of the ESU from the cryocooler’s temperature that increases when turned OFF. In this work, several prototypes working around 40 K were designed, built and characterized. They consist in a low temperature cell that contains the liquid neon connected to an expansion volume at room temperature for gas storage during the liquid evaporation phase. To turn this system insensitive to the gravity direction, the liquid is retained in the low temperature cell by capillary effect in a porous material. Thanks to pressure regulation of the liquid neon bath, 900 J were stored at 40K. The higher latent heat of the liquid and the inexistence of triple point transitions at 40 K turn the pressure control during the evaporation a versatile and compact alternative to an ESU working at the triple point transitions. A quite compact second prototype ESU directly connected to the cryocooler cold finger was tested as a temperature stabilizer. This device was able to stabilize the cryocooler temperature ((≈ 40K ±1 K) despite sudden heat bursts corresponding to twice the cooling power of the cryocooler. This thesis describes the construction of these devices as well as the tests performed. It is also shown that the thermal model developed to predict the thermal behaviour of these devices, implemented as a software,describes quite well the experimental results. Solutions to improve these devices are also proposed.

40 K neon liquid energy storage unit

Cryocoolers have been progressively replacing the use of the stored cryogens in cryogenic chains used for detector cooling, thanks to their higher and higher reliability. However, the mechanical vibrations, the electromagnetic interferences and the temperature fluctuations inherent to their functioning could reduce the sensor’s sensitivity. In order to minimize this problem, compact thermal energy storage units (ESU) are studied, devices able to store thermal energy without significant temperature increase. These devices can be used as a temporary cold source making it possible to turn the cryocooler OFF providing a proper environment for the sensor. A heat switch is responsible for the thermal decoupling of the ESU from the cryocooler’s temperature that increases when turned OFF. In this work, several prototypes working around 40 K were designed, built and characterized. They consist in a low temperature cell that contains the liquid neon connected to an expansion volume at room temperature for gas storage during the liquid evaporation phase. To turn this system insensitive to the gravity direction, the liquid is retained in the low temperature cell by capillary effect in a porous material. Thanks to pressure regulation of the liquid neon bath, 900 J were stored at 40K. The higher latent heat of the liquid and the inexistence of triple point transitions at 40 K turn the pressure control during the evaporation a versatile and compact alternative to an ESU working at the triple point transitions. A quite compact second prototype ESU directly connected to the cryocooler cold finger was tested as a temperature stabilizer. This device was able to stabilize the cryocooler temperature ((≈ 40K ±1 K) despite sudden heat bursts corresponding to twice the cooling power of the cryocooler. This thesis describes the construction of these devices as well as the tests performed. It is also shown that the thermal model developed to predict the thermal behaviour of these devices,implemented as a software, describes quite well the experimental results. Solutions to improve these devices are also proposed.

Methodological framework for detection of harmonisation breaking in service environments

As the complexity of markets and the dynamicity of systems evolve, the need for interoperable systems capable of strengthening enterprise communication effectiveness increases. This is particularly significant when it comes to collaborative enterprise networks, like manufacturing supply chains, where several companies work, communicate, and depend on each other, in order to achieve a specific goal. Once interoperability is achieved, that is once all network parties are able to communicate with and understand each other, organisations are able to exchange information along a stable environment that follows agreed laws. However, as markets adapt to new requirements and demands, an evolutionary behaviour is triggered giving space to interoperability problems, thus disrupting the sustainability of interoperability and raising the need to develop monitoring activities capable of detecting and preventing unexpected behaviour. This work seeks to contribute to the development of monitoring techniques for interoperable SOA-based enterprise networks. It focuses on the automatic detection of harmonisation breaking events during real-time communications, and strives to develop and propose a methodological approach to handle these disruptions with minimal or no human intervention, hence providing existing service-based networks with the ability to detect and promptly react to interoperability issues.

Unravelling the role of alpha 2,6 sialic acid on mouse dentritic cells functions

RESUMO: As células dendríticas (CDs) são fundamentais na imunomodulação e iniciação de respostas imunes adaptativas, enquanto os ácidos siálicos (Sias) são potenciais imunomoduladores. Estas células expressam níveis elevados da sialiltransferase ST6Gal-1, que transfere Sias para a posição terminal de oligossacáridos. De facto, a maturação de CDs está associada a uma diminuição da sialilação na sua superfície celular. Apesar de ter função biológica desconhecida, a forma solúvel, extracelular de ST6Gal-1 aumenta em cancros e inflamação. Ainda assim, esta foi recentemente identificada como moduladora da hematopoiese. Considerando o importante papel das CDs na iniciação de respostas anticancerígenas, uma ligação entre a sialilação extrínseca induzida por ST6Gal-1 extracelular e o seu papel na modulação de CDs deve ser identificada. Neste trabalho hipotetizou-se que a sialilação α2,6 extrínseca de CDs diminui o seu perfil de maturação mediante ativação por lipopolissacarídeo (LPS). O objetivo principal foi sialilar extrinsecamente em α2,6 CDs da medula óssea de murganhos, avaliando os seus perfis de maturação e de libertação de citocinas, após estimulação com LPS (por Citometria de Fluxo e ELISA, respetivamente). Ao contrário da hipótese, o perfil celular não foi modulado, usando várias abordagens. Por outro lado, a consequência da falta de α2,6 Sias na maturação de CDs foi avaliada analisando: 1) CDs da medula óssea de murganhos tratadas com sialidase, 2) CDs da medula óssea e 3) CDs das vias aéreas, ambas de murganhos deficientes em ST6Gal-1, comparando com a estirpe selvagem. Estes resultados sugerem que a perta total de α2,6 Sias se relaciona com o aumento da expressão do complexo de histocompatibilidade principal de classe II. Apesar de controverso, é provável existirem mecanismos inerentes à ativação por LPS, reduzindo a eficácia de ST6Gal-1 extracelular. Por outro lado, a modificação no perfil de CDs de murganhos deficientes em ST6Gal-1 poderá relacionar-se com uma predisposição para um estado inflamatório severo. Com isto, o trabalho desenvolvido abriu futuras linhas de investigação, nomeadamente explorar outros fatores envolvidos na (de)sialilação α2,6 de CDs, podendo ter impacto em imunoterapia com uso de CDs.--------------------------ABSTRACT: Dendritic cells (DCs) are vital for immunomodulation and the initiation of adaptive immune responses, whereas sialic acids (Sias) are potential immunomodulators. These cells express high levels of sialyltransferase ST6Gal-1, responsible for transferring Sias to the terminal position of oligosaccharide chains. Indeed, DCs’ maturation is associated with decreased cell surface sialylation. Although its biological significance is unknown, the soluble, extracellular form of ST6Gal-1 increases in cancers and inflammation. However, extracellular ST6Gal-1 was recently identified as modulator of hematopoiesis. Considering that DCs play a crucial role in the initiation of a productive anti-cancer immune response, a link between extrinsic sialylation by the extracellular ST6Gal-1 on DC function needs to be investigated. We hypothesize that extrinsic α2,6 sialylation of DCs diminishes their maturation features upon lipopolysaccharide (LPS) stimulation. The main goal was to extrinsically α2,6 sialylate mice bone marrow derived DCs (BMDCs) and to evaluate their maturation and cytokine profiles upon LPS stimulation (by Flow Cytometry and ELISA, respectively). Unlike the hypothesis, we observed that BMDCs’ profile is not modulated, even using several approaches. In contrast, the consequence of lacking cell surface α2,6 Sias in DC maturation was assessed by analysing: 1) sialidase treated BMDCs, 2) BMDCs from mice lacking ST6Gal-1 and 3) DCs from mice airways, comparing wild type with ST6Gal-1 knockout mice. These results suggest that overall lack in α2,6 Sias is related with increased expression of major histocompatibility class II (MHC-II). Although appearing to be controversial findings, other intracellular mechanisms might be occurring upon LPS-induced BMDC activation, probably reducing extracellular ST6Gal-1 effect. In opposite, the modification observed in DC profile of ST6Gal-1 knockout mice might be related to its predisposition to a more severe inflammatory status. With this, the developed work opened future lines of investigation, namely exploring other factors involved in α2,6 (de)sialylation of DC, which might have influence in immunotherapy using DCs.

Management consulting labs Galp loyalty

The main objective of this project was to investigate methods to create a new loyalty approach for Galp Energia in order to improve customer retention and reduce churn, related with the expansion of hypermarket chains’ in the Fuel Retail Market and the country’s economical situation. The team carried out on-spot surveys and focus groups, researched loyalty programs’ best practices, analyzed peers practices and the company’s past performance in order to find important customer insights. These were used to develop the final recommendations resulting in a new paradigm to the group’s loyalty approach alongside incremental improvements to the current loyalty solutions.