Validation of NASA rotor 67 with openFOAM's transonic density-based solver

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Implementing quality management systems in small and medium construction companies: a contribution to a road map for success

Leadership and Management in Engineering, January 2009

Two stage abe fermentation with in situ pervaporation and high cell density

Dissertation presented to Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa for obtaining the master degree in Membrane Engineering

A technology diffusion perspective of Enterprise Resource Planning across European Small and Medium Enterprises: from determinants to Use to Value

Tese apresentada como requisito parcial para obtenção do grau de Doutor em Gestão de Informação

Humoral response towards high density lipoprotein : a new mechanism for atherogenesis

RESUMO:Aterosclerose é uma das principais causas de morbilidade e mortalidade no mundo ocidental. É responsável, direta ou indiretamente, pela maior percentagem de gastos com a saúde na maioria dos países europeus. A “teoria lipídica” da aterosclerose, que se baseia na dislipidemia como causa primária para a doença vascular tem algumas implicações práticas importantes: permite a definição de linhas de orientação e protocolos simples e ainda estabelece alvos terapêuticos que podem ser atingidos na maior parte dos casos com a atual intervenção farmacológica. A associação da aterosclerose com o sistema imunológico (a “teoria imunológica”), forneceu por sua vez novas formas de explorar os mecanismos envolvidos e abriu novas perspetivas para um conhecimento mais completo da doença. No entanto, levanta dificuldades evidentes no que diz respeito às possibilidades terapêuticas. De todos os intervenientes no processo aterosclerótico (bioquímicos, imunológicos e anatómicos), as lipoproteínas de elevada densidade (HDL) são atualmente reconhecidas como um dos fatores mais importantes na aterogénese. Isto é baseado no reconhecimento das múltiplas propriedades anti-aterogénicas das HDL como por exemplo: a anti-oxidante, a anti-inflamatória e a antitrombótica, bem como o seu importante papel na melhoraria da função endotelial. Atualmente, é consensual que as funções anti-aterogénicas das HDL vão além do seu papel no transporte reverso do colesterol (RCT) e a importância das HDL no processo aterosclerótico baseia-se não apenas no seu papel protetor impedindo a formação da placa de ateroma, mas também na estabilização destas, prevenindo a sua ruptura e, consequentemente o evento trombótico. Como fundamentais no processo aterosclerótico estão reconhecidos dois principais conjuntos de eventos: um caracterizado por alterações no metabolismo das lipoproteínas que resultam em lipoproteínas pró-inflamatórias e pró-oxidantes que interagem com os componentes celulares da parede arterial e que conduzem à formação da placa de ateroma; o outro evento é a resposta imunológica desencadeada contra um novo conjunto de antigénios que por sua vez leva à produção de citoquinas pró-inflamatórias. Dada a complexidade da HDL e das suas múltiplas funções estas lipoproteínas tornaram-se um potencial alvo para a resposta auto-imune, e cujas consequências podem explicar algumas das associações identificados em estudos clínicos e epidemiológicos. Contudo esta interação entre o sistema imunológico e HDL nunca foi exaustivamente estudada. Portanto, pomos a hipótese de que em condições oxidativas e pró-inflamatórias, um aumento do antigénio (HDL) conduz a um consequente acréscimo na produção de anticorpos anti-HDL (aHDL) responsáveis pela alteração quantitativa e / ou qualitativa das HDL. O conceito de que estes anticorpos podem contribuir tanto para a evolução a longo prazo do processo aterosclerótico, como para o desencadeamento de eventos clínicos pode também explicar a heterogeneidade encontrada em cada doente e nos grandes estudos clínicos, no que diz respeito aos fatores de risco e outcomes clínicos. Para além disso, a confirmação desta hipótese pode permitir explicar porque é que as intervenções terapêuticas atualmente em desenvolvimento para aumentar os níveis de HDL, não conseguem mostrar a tão esperada redução do risco vascular. O objetivo geral desta tese foi identificar e caracterizar a resposta humoral contra os componentes da HDL, e avaliar possíveis mecanismos que possam contribuir para a modificação das propriedades anti-aterogénicas das HDL. Para alcançar este objetivo investigou-se: 1) A presença de anticorpos aHDL em doentes com lúpus eritematoso sistémico (SLE) e em doentes com manifestações clínicas de aterosclerose, como os doentes com doença arterial coronária (CAD), acidente vascular cerebral isquémico (IS) e diabetes tipo 2; 2) Os principais alvos antigénicos dentro do complexo das HDL e a associação entre os títulos de anticorpos aHDL e diferentes características clínicas destas doenças; 3) As modificações das funções normais associadas às HDL, em particular da função anti-oxidante e anti-inflamatória; 4) A atividade biológica dos anticorpos aHDL isolados do soro de doentes através de um conjunto de experiências in vitro de inibição da atividade da paraoxonase 1 (PON1) e da expressão de moléculas de adesão em culturas de células endoteliais. Para tal foi necessário estabelecer um método de isolamento dos anticorpos. Os anticorpos aHDL isolados do soro de doentes foram utilizados de forma a identificar as potenciais alterações dos sistemas celulares utilizados; 5) O efeito de fármacos usados no tratamento das dislipidemias, em particular o ácido nicotínico e as estatinas, na variação dos títulos de anticorpos aHDL através de ensaios clínicos randomizados, controlados com placebo e em dupla ocultação. Os métodos utilizados neste trabalho incluíram: técnicas imunológicas (como por exemplo, enzyme-linked immunoabsorbent assay - ELISA, ensaio imunoturbidimetrico e cromatografia de imuno-afinidade) técnicas bioquímicas (tais como a quantificação de atividade enzimática por espectrofotometria e por luminescência), experiências com cultura de células e citometria de fluxo. Os nossos resultados mostram que: 1) A presença de anticorpos aHDL, e mais especificamente anticorpos contra alguns do seus principais componentes como a apolipoproteína A-I (ApoA-I, principal apolipoproteína presente nas HDL) e a PON1 (o enzima que mais contribui para a propriedade anti-oxidante das HDL), quer em doentes com doenças auto-imunes, como o SLE, quer em doentes com manifestações clínicas de aterosclerose, como CAD, IS e diabetes tipo 2. Os doentes apresentaram títulos de anticorpos IgG aHDL, aApoA-I e aPON1 significativamente mais elevados do que controlos saudáveis com a mesma idade e sexo. 2) A correlação positiva estatisticamente significativa entre os títulos de aHDL e aApoA-I e aPON1 sugere que estes sejam dois dos principais alvos antigénicos dentro do complexo das HDL. Os anticorpos encontrados nestes doentes estão associados com a diminuição da atividade da PON1 e a uma redução da capacidade anti-oxidante total (TAC) do soro, um aumento dos biomarcadores de disfunção endotelial (como por exemplo dos metabolitos do óxido nítrico - NO2- e NO3-, as moléculas de adesão vascular e intracelular - VCAM-1 e ICAM-1 e os níveis de 3-nitrotirosina). Nos doentes com SLE os títulos destes estão associados a um aumento do dano cardiovascular e à atividade global da doença avaliados pelas escalas SLICC/ACR DI e BILAG score, respetivamente. Enquanto que nos doentes com diabetes tipo 2 estes anticorpos estão associados com um aumento dos níveis de glicemia em jejum (FGP) e hemoglobina glicada (HbA1c). 3) Após se ter estabelecido um método de isolamento dos anticorpos que permite isolar quantidades significativas de anticorpos do soro de doentes sem perder a sua especificidade, foi identificada a capacidade dos anticorpos isolados do soro de doentes inibirem de uma forma dependente da concentração a atividade da PON1 até um máximo de 70% no caso dos doentes com SLE e ente 7-52% no caso dos anticorpos isolados de doentes com CAD e IS. 4) O efeito anti-inflamatório das HDL na inibição da produção de VCAM-1 induzida por citoquinas (como o TNF-) foi revertido em mais de 80% pelos anticorpos aHDL isolados do soro de doentes. 5) A angiogenesis induzida por HDL através do aumento do fator de crescimento do endotélio vascular (VEGF) foi anulada em 65% pelos anticorpos aHDL isolados do soro de doentes. 6) Os atuais agentes farmacológicos disponíveis para aumentar as concentrações de HDL-C estão associados a um aumento dos títulos de anticorpos.-------- ABSTRACTAtherosclerosis is the major cause of morbidity and mortality in the western world. It is also responsible, directly or indirectly, for the highest percentage of health costs in most European countries. Despite the use of new technologies for the diagnosis of vascular disease and regardless of the major advances in treatment, the atherosclerosis-related clinical burden is still raising. The “lipid theory” of atherogenesis, which identifies dyslipidemia as the primary cause of this vascular disease has some important practical implications: it allows the definition of simple guidelines and establishes therapeutic targets which can be generally met with current pharmacologic intervention. The association between atherosclerosis an the immune system (the immune concept) has in turn provided new ways of exploring the mechanisms involved in this condition and has opened new perspectives in the understanding of the disease. However, it raises obvious difficulties when it comes to treatment options. Of all the players (biochemical, immunological and anatomical) involved in this matter, high-density lipoproteins (HDL) are currently recognised as one of the most important factors in atherogenesis. This is based on the recognition of HDL's multiple anti-atherogenic properties: anti-oxidant, anti-inflammatory and antithrombotic, as well as its capacity to improve endothelial function. Nowadays, it is widely recognized that the anti-atherogenic functions of HDL go beyond reverse cholesterol transport (RCT), and the importance of HDL is based not just on its ability to reduce atheroma formation but also on its ability to stabilise plaques, therefore preventing their rupture and ultimately thrombosis. Two main set of events have been recognised as fundamental in atherogenesis: one, characterized by lipoprotein metabolism alterations, resulting in pro-inflammatory and pro-oxidative lipoproteins, which interact with the normal cellular elements of the arterial wall leading to atheroma formation; the other, the immune cellular response towards new sets of antigens which lead to the production of pro-inflammatory cytokines. Given to HDL complexity and multiple functions this lipoprotein has became a potential target for an auto-immune response, the consequences of which may explain some of the association identified in epidemiological and clinical studies, though the interaction between the immune system and HDL has never been thoroughly addressed. Therefore, we hypothesized that under oxidative and pro-inflammatory conditions, the increase in the antigen (HDL) would lead to a consequent increase in the production of anti-HDL (aHDL) antibodies be responsible for quantitative and/or qualitative changes of HDL. The concept that these antibodies may contribute either to the long-term evolution of atherosclerosis or to the triggering of clinical events may also explain the heterogeneity found in individual patients and in large cohorts regarding risk factors and clinical outcomes. Moreover this may be a major breakthrough in understanding why therapeutic interventions that increase HDL levels, failed to show the anticipated reduction in vascular risk. The overall aims of this thesis were to identified and characterize the humoral response towards HDL components and to evaluate the possible mechanisms that may contribute to the modifications of the anti-atherogenic properties of HDL. To achieve this objective we investigated: 1) the presence of aHDL antibodies in patients with systemic lupus erythematosus (SLE) and in patients with atherosclerosis-related clinical events, such as coronary artery disease (CAD), ischemic stroke (IS) and type 2 diabetes; 2) the association between the titres of aHDL antibodies and different clinical features of these diseases; 3) the modifications of the anti-atherogenic properties of HDL; 4) the biologic effect of aHDL antibodies isolated from serum of patients on the anti-oxidant and anti-inflammatory properties of HDL; 5) the effect of different pharmacologic treatments for dyslipidemia on the prevalence and activity of aHDL antibodies. The methodologies used in this work included immunologic-related techniques (e.g. enzyme-linked immunoabsorbent assay – ELISA, immunoturbidimetric immunoassay and immunoaffinity chromatography), biochemical techniques (enzymatic assays with quantification by spectrophotometry and luminescence methods), cell culture experiments and flow cytometry. Our results indicate that: 1) The titres of IgG aHDL, anti-apolipoprotein A-I (aApoA-I) and anti-paraoxonase 1 (aPON1) antibodies were higher in patients with SLE, CAD, IS and type 2 diabetes when compared with age and sex matched healthy controls. 2) The antibodies found in these patients were associated with decreased PON1 activity, (the enzyme responsible for most of the anti-oxidant effect of HDL), reduced total anti-oxidant capacity (TAC) of serum and increased biomarkers of endothelial dysfunction (nitric oxide metabolites, adhesion molecules, nitrotyrosine). In patients with SLE the antibody titres were associated with an increase in disease-related cardiovascular damage and activity whereas in patients with type 2 diabetes they were directly related with the fasting glucose plasma (FGP) levels and the glycosylated haemoglobin (HbA1c). 3) The antibodies isolated from serum of our patients, directly inhibited HDL-associated PON1 activity in a dose dependent way ranging from 7 to 52%. 4) The anti-inflammatory effect of HDL, measured by the percentage of inhibition of the cytokine-induced production of vascular adhesion molecules (VCAM-1), was reduced in more than 80% by aHDL antibodies isolated from our patients. 5) The HDL-induced angiogenesis by increasing vascular endothelial growth factor (VEGF) levels was abrogated in 65% by the antibodies isolated from serum of patients. 6) The current available pharmacologic agents for increasing HDL-C concentrations were associated with an increase in the titres of IgG aApoA-I antibodies. This increase was higher in the extended release niacin when compared to statins probably due to their dampening effect on oxidative stress. In conclusion, aHDL antibodies are present in different pathologic conditions. aHDL antibodies represent a family of self-reacting immunoglobulins, of which ApoA-I and PON1 might be the most relevant targets. These antibodies are biologically active, interfering with the HDL anti-oxidant and anti-inflammatory properties and, consequently, with the atherosclerotic process. The pathogenic potential of these antibodies may lead to the identification of a new biomarker for vascular disease, whilst presenting itself as a novel target for a different treatment approach which may redefine the treatment strategies and clinical trials design for HDL interventions in the future.

Production of chitin-glucan complex by Pichia pastoris

Dissertation for the Degree of Master in Biotechnology

The Internationalization of a Portuguese small and medium enterprise: The case of Vale da Rosa

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Porous structures for the purification of biopharmaceuticals

This work aimed at the development of a (bio)polymeric monolithic support for biopharmaceuticals purification and/or capture. For that, it was assured that functional groups on its surface were ready to be involved in a plethora of chemical reactions for incorporation of the desired and most suitable ligand. Using cryogelation as preparation method a screening on multiple combinations of materials was performed in order to create a potentially efficient support with the minimal footprint, i.e. a monolithic support with reasonable mechanical properties, highly permeable, biocompatible, ready to use, with gravitational performance and minimal unspecific interactions towards the target molecules, but also biodegradable and produced from renewable materials. For the pre-selection all monoliths were characterized physico-chemically and morphologically; one agarose-based and two chitosan-based monoliths were then subjected to further characterizations before and after their modification with magnetic nanoparticles. These three specimens were finally tested towards adenovirus and the recovery reached 84% for the chitosan-GMA plain monolith prepared at -80°C. Monoliths based on chitosan and PVA were prepared in the presence and absence of magnetic particles, and tested for the isolation of GFP directly from crude cellular extracts. The affinity ligand A4C7 previously selected for GFP purification was synthesized on the monolith. The results indicated that the solid-phase synthesis of the ligand directly onto the monolith might require optimization and that the large pores of the monoliths are unsuitable for the purification of small proteins, such as GFP.

Molecular simulation of gas adsorption equilibria in nanoporous materials

This work is divided into two distinct parts. The first part consists of the study of the metal organic framework UiO-66Zr, where the aim was to determine the force field that best describes the adsorption equilibrium properties of two different gases, methane and carbon dioxide. The other part of the work focuses on the study of the single wall carbon nanotube topology for ethane adsorption; the aim was to simplify as much as possible the solid-fluid force field model to increase the computational efficiency of the Monte Carlo simulations. The choice of both adsorbents relies on their potential use in adsorption processes, such as the capture and storage of carbon dioxide, natural gas storage, separation of components of biogas, and olefin/paraffin separations. The adsorption studies on the two porous materials were performed by molecular simulation using the grand canonical Monte Carlo (μ,V,T) method, over the temperature range of 298-343 K and pressure range 0.06-70 bar. The calibration curves of pressure and density as a function of chemical potential and temperature for the three adsorbates under study, were obtained Monte Carlo simulation in the canonical ensemble (N,V,T); polynomial fit and interpolation of the obtained data allowed to determine the pressure and gas density at any chemical potential. The adsorption equilibria of methane and carbon dioxide in UiO-66Zr were simulated and compared with the experimental data obtained by Jasmina H. Cavka et al. The results show that the best force field for both gases is a chargeless united-atom force field based on the TraPPE model. Using this validated force field it was possible to estimate the isosteric heats of adsorption and the Henry constants. In the Grand-Canonical Monte Carlo simulations of carbon nanotubes, we conclude that the fastest type of run is obtained with a force field that approximates the nanotube as a smooth cylinder; this approximation gives execution times that are 1.6 times faster than the typical atomistic runs.

Evaporation from porous building materials and its cooling potential

Evaporative cooling is a traditional strategy to improve summer comfort, which has gained renewed relevance in the context of the transition to a greener economy. Here, the potential for evaporative cooling of two common porous building materials, natural stone and ceramic brick, was evaluated. The work has relevance also to the protection of built heritage becauseevaporation underlies the problems of dampness and salt crystallization, which are so harmful and frequent in this heritage. It was observed that the drying rate of the materials is, in some cases, higher than the evaporation rate of a free water surface. Surface area measurements by a three-dimensional optical technique suggested, as probable cause of this behavior, that surface irregularity gives rise to a large effective surface of evaporation in the material. Surface temperature measurements by infrared were performed afterward during evaporation experiments outside during a hot summer day in Lisbon. Their results indicate that ordinary building materials can be very efficient evaporative media and, thus, may help in achieving higher energy efficiency while maintaining a simultaneous constructive or architectural function.

Development of principle culture medium formulations for Saccharomyces cerevisiae

Saccharomyces cerevisiae as well as other microorganisms are frequently used in industry with the purpose of obtain different kind of products that can be applied in several areas (research investigation, pharmaceutical compounds, etc.). In order to obtain high yields for the desired product, it is necessary to make an adequate medium supplementation during the growth of the microorganisms. The higher yields are typically reached by using complex media, however the exact formulation of these media is not known. Moreover, it is difficult to control the exact composition of complex media, leading to batch-to-batch variations. So, to overcome this problem, some industries choose to use defined media, with a defined and known chemical composition. However these kind of media, many times, do not reach the same high yields that are obtained by using complex media. In order to obtain similar yield with defined media the addition of many different compounds has to be tested experimentally. Therefore, the industries use a set of empirical methods with which it is tried to formulate defined media that can reach the same high yields as complex media. In this thesis, a defined medium for Saccharomyces cerevisiae was developed using a rational design approach. In this approach a given metabolic network of Saccharomyces cerevisiae is divided into a several unique and not further decomposable sub networks of metabolic reactions that work coherently in steady state, so called elementary flux modes. The EFMtool algorithm was used in order to calculate the EFM’s for two Saccharomyces cerevisiae metabolic networks (amino acids supplemented metabolic network; amino acids non-supplemented metabolic network). For the supplemented metabolic network 1352172 EFM’s were calculated and then divided into: 1306854 EFM’s producing biomass, and 18582 EFM’s exclusively producing CO2 (cellular respiration). For the non-supplemented network 635 EFM’s were calculated and then divided into: 215 EFM’s producing biomass; 420 EFM’s producing exclusively CO2. The EFM’s of each group were normalized by the respective glucose consumption value. After that, the EFMs’ of the supplemented network were grouped again into: 30 clusters for the 1306854 EFMs producing biomass and, 20 clusters for the 18582 EFM’s producing CO2. For the non-supplemented metabolic network the respective EFM’s of each metabolic function were grouped into 10 clusters. After the clustering step, the concentrations of the other medium compounds were calculated by considering a reasonable glucose amount and by accounting for the proportionality between the compounds concentrations and the glucose ratios. The approach adopted/developed in this thesis may allow a faster and more economical way for media development.

Hydroxyapatite porous structures for bone tissue engineering

Esta dissertação teve como objetivo o desenvolvimento de espumas porosas de hidroxiapatite (HA) baseadas em réplicas invertidas de cristais coloidais (ICC) para substituição óssea. Um ICC é uma estrutura tridimensional de elevada porosidade que apresenta uma rede interconectada de poros com elevada uniformidade de tamanhos. Este tipo de arquitetura possibilita uma proliferação celular homogénea e superiores propriedades mecânicas quando comparada com espumas de geometria não uniforme. O cristal coloidal (CC) - o molde da espuma - foi criado por empacotamento de microesferas de poliestireno (270 μm) produzidas por microfluídica e posterior tratamento térmico. O molde foi impregnado com um gel de hidroxiapatite produzido via sol-gel utilizando pentóxido de fósforo e nitrato de cálcio tetrahidratado como percursores de fósforo e cálcio, respectivamente. A espuma cerâmica foi obtida num único passo depois de um tratamento térmico a 1100oC que permitiu a solidificação do gel e a remoção do CC. A análise por espetroscopia de infravermelho por transformada de Fourier (FTIR) e difração de raios-X (XRD) revelou uma hidroxiapatite carbonatada tipo A com presença de fosfatos tricálcicos. As propriedades mecânicas foram avaliadas por testes de compressão. A biocompatibilidade in vitro foi demonstrada através de testes de adesão e proliferação celular de osteoblastos.

NHL 3.5 mortars with scrap tire rubber

The use of wastes and industrial by-products as building materials is an important issue in order to decrease costs with waste management and the embodied energy of building products. Scrap tire rubber has been studied as aggregate for cementitious materials. Natural hydraulic limes are natural binders with particular characteristics of both air and hydraulic binders. Their specifications became stricter with the last version of EN 459-1:2010. In this study scrap tire rubber was used as additional aggregate of mortars, based on NHL3.5 and natural sand. Different particle size fractions and proportions of scrap tire rubber were used: a mix obtained almost directly from industry (only after sieving for preparation of particle sizes similar to mortar aggregate) and separated fine, medium and coarse fractions; 0%, 18%, 36% and 54% weight of binder, corresponding to 2.5%, 5% and 7.5% weight of sand. The influence of the rubbers´ additions on the mortars´ fresh state, mechanical and physical performance is presented, namely by flow table consistency, water retention, fresh bulk density, dynamic elasticity modulus, flexural and compressive strength, open porosity and bulk density, capillary absorption, drying and thermal conductivity. The use of the rubber mix coming from the waste tire industry seems advantageous and may open possibilities for use as raw material by the mortars industry.

The importance of succession planning in family-owned Small and Medium Enterprises in Portugal

This work project addresses the importance of succession planning in family-owned Small and Medium Enterprises (SMEs). This is directly related with Human Resources Management (HRM) given that there is an HRM long term vision in order for the succession to be planned on time and benefit the companies. This study focused on SMEs since these are the entities that have a minor focus on HRM practices. A total of 22 in-depth interviews were conducted and analyzed. Selected SMEs owners/managers and successors/antecessors were interviewed with the purpose of acquiring more insight on the level of succession planning, using a qualitative methodology from which the process of succession was derived. This study unveils that the first step in this process is related to the definition of criteria to be a good successor, followed by the choice of possible successors, being the children the natural successors, but also considering other potential ones, and finally some considerations on the future of these companies.