27 resultados para SOLID-SOLUTIONS
Resumo:
A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics
Resumo:
A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics
Resumo:
A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics
Resumo:
This paper discusses the development of modular solutions for eco low-cost houses based on a pre-fabricated modular wall system environmentally sustainable, socioeconomically competitive and geared towards developing African nations with a housing deficit. The key point to the research of a modular wall solution is a structural layer complemented with local and materials made by non-specialized workforce. This wall also meets also hydrothermal acoustic and mechanical properties. Thus,the solution also offers good safety and interior comfort conditions to its users while maintaining the flexibility to expand the size of the house. Parameters as dimensions, materials and constructive processes of the existing housing stock were studied. Features such as the family size, typology, different uses, common materials, existing regulations, minimal living conditions, safety and comfort have also been considered to achieve the most efficient solution.
Resumo:
Fundação para a Ciência e a Tecnologia - SFRH/BD/27914/2006
Resumo:
A producer of 5.4 M bbl/d, totalling almost half of the consumption of the entire European Union, the Gulf of Guinea is a fundamental lifeline and maritime link between Europe, the Americas and Africa. Geographically positioned as a staging post for transit originating in Latin America and coupled with its relatively porous borders, the region is also the perfect stepping stone for contraband heading to European shores. While blessed with an enviable wealth of marine and mineral resources, the region is also plagued by an ever-increasing spectre of maritime piracy; accounting for around 30% of incidents in African waters from 2003 to 2011. It is for these reasons that this research centres around the issues of maritime security in the Gulf of Guinea, with a particular focus on the first two decades of the 21st century. This research looks to examine the overall picture of the present state of play in the area, before going on to provide an analysis of potential regional developments in maritime security. This research begins with the analysis of concepts/phenomena that have played a notable role in the shaping of the field of maritime security, namely Globalisation and security issues in the post-Cold War era. The ensuing chapter then focuses in on the Gulf of Guinea and the issues dominating the field of maritime security in the region. The penultimate chapter presents a SWOT analysis, undertaken as part of this research with the aim of correlating opinions from a variety of sectors/professions regarding maritime security in the Gulf of Guinea. The final chapter builds upon the results obtained from the abovementioned SWOT analysis, presenting a series of potential proposals/strategies that can contribute to the field of maritime security in the region over the coming years. This research draws to a close with the presentation of conclusions taken from this particular investigation, as well as a final overview of the earlier presented proposals applicable to the field of maritime security during the second decade of the 21st century.
Resumo:
NSBE - UNL
Resumo:
An ion emitter consisting of a sharp silver tip covered in RbAg4I5 solid electrolyte film has been developed and studied. An accelerating potential is applied and Ag+ ions are emitted from the tip’s apex by field evaporation. The emitted ions are collected by a Faraday cup, producing a current on the pico/nanoampere level which is read by an electrometer. The tips were produced mechanically by sandpaper polishing. The sharpest tip produced had a 2:4 m apex radius. Two deposition methods were studied: thermal vacuum and pulsed laser deposition. The best tip produced a peak current value of 96nA at 180oC, and a quasi-stable 4nA emission current at 160oC, both using an extraction potential of 10kV . The emission dependence on time, temperature and accelerating potential has been studied. Deposited films were characterized by X-ray diffraction (XRD), profilometry, optical and Scanning Electron Microscope (SEM) and Secondary Ion Mass Spectroscopy (SIMS) measurements. Several ion emitters were developed, the latter ones were all able to maintain stable high ion emissions for long periods of time. This investigation was a continuation of an ongoing project backed by the European Space Agency, with the objective of making a proof of concept of this kind of ion emitter with potential application on ion thrusters for orbiting satellites. Going forward, it would be interesting to make a finer analysis of the electrolyte’s conductivity at high temperatures, explore Wien Effect-based emission and to further develop a multi-tip ion emitter prototype.
Resumo:
Microbial electrolysis cells (MECs) are an innovative and emerging technique based on the use of solid-state electrodes to stimulate microbial metabolism for wastewater treatment and simultaneous production of value-added compounds (such as methane). This research studied the performance of a two-chamber MEC in terms of organic matter oxidation (at the anode) and methane production (at the cathode). MEC‟s anode had been previously inoculated with an activated sludge, whereas the cathode chamber inoculum was an anaerobic sludge (containing methanogenic microorganisms). During the experimentation, the bioanode was continuously fed with synthetic solutions in anaerobic basal medium, at an organic load rate (OLR) of around 1 g L-1 d-1, referred to the chemical oxygen demand (COD). At the beginning (Run I), the feeding solution contained acetate and subsequently (Run II) it was replaced with a more complex solution containing soluble organic compounds other than acetate. For both conditions, the anode potential was controlled at -0.1 V vs. standard hydrogen electrode, by means of a potentiostat. During Run I, over 80% of the influent acetate was anaerobically oxidized at the anode, and the resulting electric current was recovered as methane at the cathode (with a cathode capture efficiency, CCE, accounting around 115 %). The average energy efficiency of the system (i.e., the energy captured into methane relative to the electrical energy input) under these conditions was over 170%. However, reactor‟s performance decreased over time during this run. Throughout Run II, a substrate oxidation over 60% (on COD basis) was observed. The electric current produced (57% of coulombic efficiency) was also recovered as methane, with a CCE of 90%. For this run the MEC‟s average energy efficiency accounted for almost 170 %. During all the experimentation, a very low biomass growth was observed at the anode whereas ammonium was transferred through the cationic membrane and concentrated at the cathode. Tracer experiments and scanning electron microscopy analyses were also carried out to gain a deeper insight into the reactor performance and also to investigate the possible reasons for partial loss of performance. In conclusion, this research suggests the great potential of MEC to successfully treat low-strength wastewaters, with high energy efficiency and very low sludge production.
Resumo:
RESUMO - Os resíduos hospitalares (RH) perigosos — Grupos III e IV — produzidos na prestação de cuidados domiciliários (CD), dada a sua composição, infecciosidade, toxicidade, mobilidade e persistência, constituem um perigo relevante. A exposição a estes resíduos traduz-se num risco importante para os profissionais de saúde, doentes e seus familiares. Dado que em muitas situações estes resíduos ficam no domicílio dos doentes, sendo posteriormente depositados nos contentores camarários, o risco é alargado ao público em geral, aos catadores e aos profissionais de recolha de resíduos sólidos urbanos dos municípios. Através de um estudo observacional, transversal, com componente analítica, da produção de RH pretende-se determinar e caracterizar os quantitativos dos Grupos III e IV produzidos na prestação de CD em 2003 no concelho da Amadora, identificando também o seu destino final. Utiliza- se uma amostra aleatória do universo de doentes submetidos a tratamento domiciliário em 2003 e efectua-se a análise da associação estatística das variáveis peso do Grupo III e peso do Grupo IV com as variáveis relativas às características do doente (sexo, idade e doença), do tratamento (duração e periodicidade) e sazonais (época do ano). A média do peso produzido dos RH por acto prestado é de 213,1 g para o Grupo III e de 3,8 g para o Grupo IV. Estima--se uma produção de RH do Grupo III na prestação de CD, em 2003, no concelho da Amadora entre 8,8 e 11,4 t e para os RH do Grupo IV um valor de 10,2 kg. Verifica-se que, por acto prestado, a produção média de resíduos do Grupo III é maior nos doentes mais idosos, nas úlceras varicosas, no pé diabético, na escara de pressão, nas situações de maior duração do tratamento e nos doentes submetidos a três tratamentos por semana. Também por acto prestado, a produção média de RH do Grupo IV é maior nos doentes mais novos, na patologia osteo-articular, na infecção, no acidente, no pós-operatório, nas situações de menor duração do tratamento e nos doentes submetidos a seis tratamentos por semana (o que está relacionado com as patologias em causa). As produções médias, por acto prestado, de ambos os grupos não apresentam relação com as variáveis idade e época do ano. Todos os RH produzidos nos actos prestados em CD, em 2003, no concelho da Amadora foram depositados nos contentores municipais. Recomendam-se acções de formação e de informação dirigidas aos profissionais de saúde e ao público em geral, a criação de condições para que os RH produzidos nos CD sejam transportados, em condições adequadas, para os centros de saúde e uma articulação entre os órgãos de gestão dos centros de saúde, a autarquia, os operadores de gestão de RH e os serviços de saúde pública no sentido de serem encontradas soluções apropriadas e inovadoras relativamente à gestão dos RH produzidos na prestação de CD.
Resumo:
Unilever Food Solutions new digital CRM1 Platform - What is the combination of tools, processes and content that will help Unilever Food Solutions grow his business? Unilever Food Solutions (UFS) intend to create a new online platform to enable it to communicate with segments of the markets, which have previously been too difficult to reach. Specifically targeted at Chefs and other food professionals, the aim is to create an interactive website, which delivers value to its intended users by providing a variety of relevant content and functions, while simultaneously opening up a potential transactional channel to those same users.