20 resultados para Multiphase microstructure
Resumo:
Quadrature oscillators are key elements in modern radio frequency (RF) transceivers and very useful nowadays in wireless communications, since they can provide: low quadrature error, low phase-noise, and wide tuning range (useful to cover several bands). RC oscillators can be fully integrated without the need of external components (external high Q-inductors), optimizing area, cost, and power consumption. The conventional structure of ring oscillator offers poor frequency stability and phasenoise, low quality factor (Q), and besides being vulnerable to process, voltage and temperature (PVT) variations, its performance degrades as the frequency of operation increases. This thesis is devoted to quadrature oscillators and presents a detailed comparative study of ring oscillator and shift register (SR) approaches. It is shown that in SRs both phase-noise and phase error are reduced, while ring oscillators have the advantage of occupying less area and less consumption due to the reduced number of components in the circuit. Thus, although ring oscillators are more suitable for biomedical applications, SRs are more appropriate for wireless applications, especially when specification requirements are more stringent and demanding. The first architecture studied consists in a simple CMOS ring oscillator employing an odd number of static single-ended inverters as delay cells. Subsequently, the quadrature 4-stage ring oscillator concept is shown and post-layout simulations are presented. The 3 and 4-phase single-frequency local oscillator (LO) generators employing SRs are presented, the latter with 50% and 25% duty-cycles. The circuits operate at 600 MHz and 900 MHz, and were designed in a 130 nm standard CMOS technology with a voltage supply of 1.2 V.
Resumo:
Transparent conducting oxides (TCOs) have been largely used in the optoelectronic industry due to their singular combination of low electrical resistivity and high optical transmittance. They are usually deposited by magnetron sputtering systems being applied in several devices, specifically thin film solar cells (TFSCs). Sputtering targets are crucial components of the sputtering process, with many of the sputtered films properties dependent on the targets characteristics. The present thesis focuses on the development of high quality conductive Al-doped ZnO (AZO) ceramic sputtering targets based on nanostructured powders produced by emulsion detonation synthesis method (EDSM), and their application as a TCO. In this sense, the influence of several processing parameters was investigated from the targets raw-materials synthesis to the application of sputtered films in optoelectronic devices. The optimized manufactured AZO targets present a final density above 99 % with controlled grain size, an homogeneous microstructure with a well dispersed ZnAl2O4 spinel phase, and electrical resistivities of ~4 × 10-4 Ωcm independently on the Al-doping level among 0.5 and 2.0 wt. % Al2O3. Sintering conditions proved to have a great influence on the properties of the targets and their performance as a sputtering target. It was demonstrated that both deposition process and final properties of the films are related with the targets characteristics, which in turn depends on the initial powder properties. In parallel, the influence of several deposition parameters in the film´s properties sputtered from these targets was investigated. The sputtered AZO TCOs showed electrical properties at room temperature that are superior to simple oxides and comparable to a reference TCO – indium tin oxide (ITO), namely low electrical resistivity of 5.45 × 10-4 Ωcm, high carrier mobility (29.4 cm2V-1s-1), and high charge carrier concentration (3.97 × 1020 cm-3), and also average transmittance in the visible region > 80 %. These superior properties allowed their successful application in different optoelectronic devices.
Resumo:
Flow of new information is what produces price changes, understanding if the market is unbalanced is fundamental to know how much inventory market makers should keep during an important economic release. After identifying which economic indicators impact the S&P and 10 year Treasuries. The Volume Synchronized Probability of Information-Based Trading (VPIN) will be used as a predictability measure. The results point to some predictability power over economic surprises of the VPIN metric, mainly when calculated using the S&P. This finding appears to be supported when analysing depth imbalance before economic releases. Inferior results were achieved when using treasuries. The final aim of this study is to fill the gap between microstructural changes and macroeconomic events.
Resumo:
Crocodylomorph eggs are relatively poorly known in the fossil record when compared with skeletal remains, which are found all over the world, or when compared with dinosaur eggs. Herein are described crocodiloid eggshells from the Upper Jurassic Lourinhã Formation of Portugal, recovered from five sites: Cambelas (clutch), Casal da Rola, Peralta (eggshell fragments), and Paimogo North and South (three partial crushed eggs and eggshell fragments). The clutch of Cambelas, composed of 13 eggs, is the only sample not found in association with dinosaur eggshells. Morphological characters of the eggshells described herein, such as shell units and microstructure, are consistent with the crocodiloid morphotype. As such, this material is assigned to the oofamily Krokolithidae, making them the oldest known crocodylomorph eggs so far and the best record for eggs of non-crocodylian crocodylomorphs. Two new ootaxa are erected, Suchoolithus portucalensis oogen. et oosp. nov, for the clutch of Cambelas, and Krokolithes dinophilus, oosp. nov., for the remaining eggshells. The basic structure of crocodilian eggshells has remained stable since at least the Late Jurassic. Additionally, the findings suggest previously unknown biological associations with contemporary archosaurs, shedding light on the poorly understood egg morphology, reproduction strategies and paleobiology of crocodylomorphs during the Late Jurassic.
Resumo:
No contexto de internacionalização de hoje, acompanhando os contactos cada vez mais intensos entre o mundo chinês e o mundo lusófono, é exigida a maior atenção à questão da lexicultura na comunicação interlingual e intercultural, pois o que preocupa as partes envolvidas não é apenas descodificar os signos meramente linguísticos, mas também perceber a cultura que a língua, nomeadamente as unidades lexicais transportam, visando um comportamento culturalmente correto e adequado nessa comunicação. Partindo desta preocupação, este trabalho tenta, através da abordagem e análise da língua, da escrita e do léxico chineses, comprovar que o chinês, devido às suas peculiaridades inexistentes em outras línguas do mundo, constitui o vivo exemplo que exemplifica e alarga o conceito de lexicultura, pois a própria língua, sobretudo a sua escrita e as suas unidades lexicais, além de refletirem a cultura popular e partilhada, também contam verdadeiras histórias da Humanidade e da China. Baseando-se nesta abordagem e análise, a tese apresenta um novo modelo de dicionário cultural chinês-português, com propostas concretas de seleção de vedetas para a sua macroestrutura e de definição de vedetas na sua microestrutura, ao serviço da comunicação entre os dois mundos em questão.