Study of multi-component systems in polybenzimidazole membrane formation and their impact on membrane performance

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Estimating data divergence in cloud computing storage systems

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

A constructive technology assessment of stationary energy storage systems: prospective life cycle orientated analysis

Based on the presentation and discussion at the 3rd Winter School on Technology Assessment, December 2012, Universidade Nova de Lisboa (Portugal), Caparica Campus, PhD programme on Technology Assessment

Processamento de imagens BOLD de Ressonância Magnética do músculo através da técnica ICA

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Establishing a cell biology platform: isolation and preservation of human blood products

Dissertação para obtenção do Grau de Mestre em Genética Molecular e Biomedicina

TSKY: a dependable middleware solution for data privacy using public storage clouds

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Healing replicas in a software component replication system

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Experimental high-throughput adsorption unit for multi-evaluation of adsorbents for gas capture, storage and separation applications

Dissertação para obtenção do grau de Mestre em Engenharia Química e Bioquímica

An assessment of the integration of the mental health component into the care of women affected by intimate partner violence in Peru

RESUMO: A violência contra as mulheres (VCM) é um problema de saúde pública e uma violação dos direitos humanos. Ele tem uma alta prevalência na América Latina e no Caribe; o Estudo da Violência Contra as Mulheres da Organização Mundial de Saúde (OMS) identificou que as mulheres peruanas sofrem o maior índice de violência. O Perú é signatário da CEDAW e da Convenção de Belém do Pará, com recomendações para resolver este tipo de discriminação e descrever o papel do setor da saúde. A lei peruana define a violência como um problema de saúde mental. Objectivos: As três orientações clínicas do Ministério da Saúde para avaliar a integração da componente de saúde mental no cuidado de mulheres afetadas pela VCM foram revistas. Método: A proteção da saúde mental foi avaliada nas orientações acima mencionadas. A lei peruana relevante para perceber o reconhecimento das consequências de VCM na saúde mental e os cuidados prestados neste contexto foram revistos. Usando esses padrões nacionais e internacionais, foi realizada uma análise de conteúdo dos guias peruanos para a atenção da violência para ver como eles se integram a saúde mental. Resultados: Estas orientações são muito extensas e não definem claramente a responsabilidade dos profissionais de saúde. Não incluem um exame de saúde mental na avaliação da vítima e são vagas na descrição das atividades a serem realizadas pelo prestador dos cuidados de saúde. As orientações recomendam uma triagem universal usando um instrumento com formato antiquado e pesado. Em contrapartida, as orientações da OMS não recomendam qualquer triagem. Conclusão: As várias orientações analisadas não fornecem a informação necessária para o profissional de saúde avaliar o envolvimento da saúde mental e, desnecessariamente, tratam as mulheres sobreviventes de VCM como doentes mentais. Recomenda-se que as orientações recentes da OMS (Responding to intimate partner violence and sexual violence against women: WHO clinical and policy guidelines, 2013) para os cuidados de VCM sejam usadas como um modelo para o desenvolvimento de um único dispositivo técnico que incorpora directrizes com base científica. legislação com base no género, saúde, guias, prevenção e mujeres 6 RESUMO (PORTUGUESE) A violência contra as mulheres (VCM) é um problema de saúde pública e uma violação dos direitos humanos. Ele tem uma alta prevalência na América Latina e no Caribe; o Estudo da Violência Contra as Mulheres da Organização Mundial de Saúde (OMS) identificou que as mulheres peruanas sofrem o maior índice de violência. O Perú é signatário da CEDAW e da Convenção de Belém do Pará, com recomendações para resolver este tipo de discriminação e descrever o papel do setor da saúde. A lei peruana define a violência como um problema de saúde mental. Objectivos: As três orientações clínicas do Ministério da Saúde para avaliar a integração da componente de saúde mental no cuidado de mulheres afetadas pela VCM foram revistas. Método: A proteção da saúde mental foi avaliada nas orientações acima mencionadas. A lei peruana relevante para perceber o reconhecimento das consequências de VCM na saúde mental e os cuidados prestados neste contexto foram revistos. Usando esses padrões nacionais e internacionais, foi realizada uma análise de conteúdo dos guias peruanos para a atenção da violência para ver como eles se integram a saúde mental. Resultados: Estas orientações são muito extensas e não definem claramente a responsabilidade dos profissionais de saúde. Não incluem um exame de saúde mental na avaliação da vítima e são vagas na descrição das atividades a serem realizadas pelo prestador dos cuidados de saúde. As orientações recomendam uma triagem universal usando um instrumento com formato antiquado e pesado. Em contrapartida, as orientações da OMS não recomendam qualquer triagem. Conclusão: As várias orientações analisadas não fornecem a informação necessária para o profissional de saúde avaliar o envolvimento da saúde mental e, desnecessariamente, tratam as mulheres sobreviventes de VCM como doentes mentais. Recomenda-se que as orientações recentes da OMS (Responding to intimate partner violence and sexual violence against women: WHO clinical and policy guidelines, 2013) para os cuidados de VCM sejam usadas como um modelo para o desenvolvimento de um único dispositivo técnico que incorpora directrizes com base científica.-----------------ABSTRACT: Violence against women (VAW) is a public health problem and a human rights violation. It is highly prevalent in Latin America and the Caribbean; the Multi-country Study on Violence against Women by the World Health Organization identified rural Peruvian women as suffering the highest rates of VAW. The country is party to CEDAW and Belen Do Para Conventions, which set forth recommendations to overcome this form of discrimination and describe the role of the health sector. Peruvian law defines violence as a mental health issue. Objective: The Ministry of Health’s three technical guidelines were reviewed to assess the integration of mental health into the care of women affected by violence Method: The protection of the woman’s mental health was ascertained in the conventions mentioned above. The recognition of the mental health consequences of VAW and the inclusion of its evaluation and care were assessed in pertinent Peruvian legislation. Using these international and national parameters, the three guidelines for the attention of violence were subject to content analysis to see whether they conform to the conventions and integrate mental health care. Outcome: These guidelines are too extensive and do not clearly define the responsibility of health workers. They do not include a mental health exam in the evaluation of the victim and are vague in the description of the actions to be carried out by the health care provider. Guidelines prescribe universal screening using an outdated instrument and moreover, WHO Guidelines do not recommend screening. Conclusion: These multiple guidelines do not provide useful guidance for health care providers, particularly for the assessment of mental health sequelae, and unnecessarily stigmatize survivors of violence as mentally ill. It is recommended that the World Health Organization’s document Responding to intimate partner violence and sexual violence against women: WHO clinical and policy guidelines (2013) be used as a blueprint for only one technical instrument that incorporates evidence -based national policy and guidelines.

Bioinspired polyethersulfone-based hollow fiber membranes as the scaffolds in renal assist device for protein-bound toxins removal from blood

Dissertation for obtaining the Master degree in Membrane Engineering

Storage of water molecules into biomimetic heterostructures: the role of roughness

The development of devices based on heterostructured thin films of biomolecules conveys a huge contribution on biomedical field. However, to achieve high efficiency of these devices, the storage of water molecules into these heterostructures, in order to maintain the biological molecules hydrated, is mandatory. Such hydrated environment may be achieved with lipids molecules which have the ability to rearrange spontaneously into vesicles creating a stable barrier between two aqueous compartments. Yet it is necessary to find conditions that lead to the immobilization of whole vesicles on the heterostructures. In this work, the conditions that govern the deposition of open and closed liposomes of 1.2-dipalmitoyl-sn-Glycero-3-[Phospho-rac-(1-glycerol)] (sodium Salt) (DPPG) onto polyelectrolytes cushions prepared by the layer-by-layer (LbL) method were analyzed. Electronic transitions of DPPG molecules as well as absorption coefficients were obtained by vacuum ultraviolet spectroscopy, while the elemental composition of the heterostructures was characterized by x-ray photoelectron spectroscopy (XPS). The presence of water molecules in the films was inferred by XPS and infrared spectroscopy. Quartz crystal microbalance (QCM) data analysis allowed to conclude that, in certain cases, the DPPG adsorbed amount is dependent of the bilayers number already adsorbed. Moreover, the adsorption kinetics curves of both adsorbed amount and surface roughness allowed to determine the kinetics parameters that are related with adsorption processes namely, electrostatic forces, liposomes diffusion and lipids re-organization on surface. Scaling exponents attained from atomic force microscopy images statistical analysis demonstrate that DPPG vesicles adsorption mechanism is ruled by the diffusion Villain model confirming that adsorption is governed by electrostatic forces. The power spectral density treatment enabled a thorough description of the accessible surface of the samples as well as of its inner structural properties. These outcomes proved that surface roughness influences the adsorption of DPPG liposomes onto surfaces covered by a polyelectrolyte layer. Thus, low roughness was shown to induce liposome rupture creating a lipid bilayer while high roughness allows the adsorption of whole liposomes. In addition, the fraction of open liposomes calculated from the normalized maximum adsorbed amounts decreases with the cushion roughness increase, allowing us to conclude that the surface roughness is a crucial variable that governs the adsorption of open or whole liposomes. This conclusion is fundamental for the development of well-designed sensors based on functional biomolecules incorporated in liposomes. Indeed, LbL films composed of polyelectrolytes and liposomes with and without melanin encapsulated were successfully applied to sensors of olive oil.

Relating the spatial component and users interests to improve applications based on questions, petitions and participatory processes

Nowadays, participatory processes attending the need for real democracy and transparency in governments and collectives are more needed than ever. Immediate participation through channels like social networks enable people to give their opinion and become pro-active citizens, seeking applications to interact with each other. The application described in this dissertation is a hybrid channel of communication of questions, petitions and participatory processes based on Public Participation Geographic Information System (PPGIS), Participation Geographic Information System (PGIS) and ‘soft’ (subjective data) Geographic Information System (SoftGIS) methodologies. To achieve a new approach to an application, its entire design is focused on the spatial component related with user interests. The spatial component is treated as main feature of the system to develop all others depending on it, enabling new features never seen before in social actions (questions, petitions and participatory processes). Results prove that it is possible to develop a working application mainly using open source software, with the possibility of spatial and subject filtering, visualizing and free download of actions within application. The resulting application empowers society by releasing soft data and defines a new breaking approach, unseen so far.

40 K Liquid Neon Energy Storage Unit

A thermal Energy Storage Unit (ESU) could be used to attenuate inherent temperature fluctuations of a cold finger, either from a cryocooler working or due to sudden income heat bursts. An ESU directly coupled to the cold source acts as a thermal buffer temporarily increasing its cooling capacity and providing a better thermal stability of the cold finger (“Power Booster mode”). The energy storage units presented here use an enthalpy reservoir based on the high latent heat of the liquid-vapour transition of neon in the temperature range 38 - 44 K to store up to 900 J, and that uses a 6 liters expansion volume at RT in order to work as a closed system. Experimental results in the power booster mode will be described: in this case, the liquid neon cell was directly coupled to the cold finger of the working cryocooler, its volume (12 cm3) allowing it to store 450 J at around 40 K. 10 W heat bursts were applied, leading to liquid evaporation, with quite reduced temperature changes. The liquid neon reservoir can also work as a temporary cold source to be used after stopping the cryocooler, allowing for a vibration-free environment. In this case the enthalpy reservoir implemented (24 cm3) was linked to the cryocooler cold finger through a gas gap heat switch for thermal coupling/decoupling of the cold finger. We will show that, by controlling the enthalpy reservoir’s pressure, 900 J can be stored at a constant temperature of 40 K as in a triple-point ESU.

40 K Neon liquid energy storage unit

Cryocoolers have been progressively replacing the use of the stored cryogens in cryogenic chains used for detector cooling, thanks to their higher and higher reliability. However, the mechanical vibrations, the electromagnetic interferences and the temperature fluctuations inherent to their functioning could reduce the sensor’s sensitivity. In order to minimize this problem, compact thermal energy storage units (ESU) are studied, devices able to store thermal energy without significant temperature increase. These devices can be used as a temporary cold source making it possible to turn the cryocooler OFF providing a proper environment for the sensor. A heat switch is responsible for the thermal decoupling of the ESU from the cryocooler’s temperature that increases when turned OFF. In this work, several prototypes working around 40 K were designed, built and characterized. They consist in a low temperature cell that contains the liquid neon connected to an expansion volume at room temperature for gas storage during the liquid evaporation phase. To turn this system insensitive to the gravity direction, the liquid is retained in the low temperature cell by capillary effect in a porous material. Thanks to pressure regulation of the liquid neon bath, 900 J were stored at 40K. The higher latent heat of the liquid and the inexistence of triple point transitions at 40 K turn the pressure control during the evaporation a versatile and compact alternative to an ESU working at the triple point transitions. A quite compact second prototype ESU directly connected to the cryocooler cold finger was tested as a temperature stabilizer. This device was able to stabilize the cryocooler temperature ((≈ 40K ±1 K) despite sudden heat bursts corresponding to twice the cooling power of the cryocooler. This thesis describes the construction of these devices as well as the tests performed. It is also shown that the thermal model developed to predict the thermal behaviour of these devices, implemented as a software,describes quite well the experimental results. Solutions to improve these devices are also proposed.

40 K neon liquid energy storage unit

Cryocoolers have been progressively replacing the use of the stored cryogens in cryogenic chains used for detector cooling, thanks to their higher and higher reliability. However, the mechanical vibrations, the electromagnetic interferences and the temperature fluctuations inherent to their functioning could reduce the sensor’s sensitivity. In order to minimize this problem, compact thermal energy storage units (ESU) are studied, devices able to store thermal energy without significant temperature increase. These devices can be used as a temporary cold source making it possible to turn the cryocooler OFF providing a proper environment for the sensor. A heat switch is responsible for the thermal decoupling of the ESU from the cryocooler’s temperature that increases when turned OFF. In this work, several prototypes working around 40 K were designed, built and characterized. They consist in a low temperature cell that contains the liquid neon connected to an expansion volume at room temperature for gas storage during the liquid evaporation phase. To turn this system insensitive to the gravity direction, the liquid is retained in the low temperature cell by capillary effect in a porous material. Thanks to pressure regulation of the liquid neon bath, 900 J were stored at 40K. The higher latent heat of the liquid and the inexistence of triple point transitions at 40 K turn the pressure control during the evaporation a versatile and compact alternative to an ESU working at the triple point transitions. A quite compact second prototype ESU directly connected to the cryocooler cold finger was tested as a temperature stabilizer. This device was able to stabilize the cryocooler temperature ((≈ 40K ±1 K) despite sudden heat bursts corresponding to twice the cooling power of the cryocooler. This thesis describes the construction of these devices as well as the tests performed. It is also shown that the thermal model developed to predict the thermal behaviour of these devices,implemented as a software, describes quite well the experimental results. Solutions to improve these devices are also proposed.