Oxidative Leaching of metals from electronic waste with solutions based on quaternary ammonium salts

The treatment of electric and electronic waste (WEEE) is a problem which receives ever more attention. An inadequate treatment results in harmful products ending up in the environment. This project intends to investigate the possibilities of an alternative route for recycling of metals from printed circuit boards (PCBs) obtained from rejected computers. The process is based on aqueous solutions composed of an etchant, either 0.2 M CuCl2.2H2O or 0.2 M FeCl3.6H2O, and a quaternary ammonium salt (quat) such as choline chloride or chlormequat. These solutions are reminiscent of deep eutectic solvents (DES) based on quats. DES are quite similar to ionic liquids (ILs) and are used as well as alternative solvents with a great diversity of physical properties, making them attractive for replacement of hazardous, volatile solvents (e.g. VOCs). A remarkable difference between genuine DES and ILs with the solutions used in this project is the addition of rather large quantities of water. It is shown the presence of water has a lot of advantages on the leaching of metals, while the properties typical for DES still remain. The oxidizing capacities of Cu(II) stem from the existence of a stable Cu(I) component in quat based DES and thus the leaching stems from the activity of the Cu(II)/Cu(I) redox couple. The advantage of Fe(III) in combination with DES is the fact that the Fe(III)/Fe(II) redox couple becomes reversible, which is not true in pure water. This opens perspectives for regeneration of the etching solution. In this project the leaching of copper was studied as a function of gradual increasing water content from 0 - 100w% with the same concentration of copper chloride or iron(III) chloride at room temperature and 80ºC. The solutions were also tested on real PCBs. At room temperature a maximum leaching effect for copper was obtained with 30w% choline chloride with 0.2 M CuCl2.2H2O. The leaching effect is still stronger at 80°C, b ut of course these solutions are more energy consuming. For aluminium, tin, zinc and lead, the leaching was faster at 80ºC. Iron and nickel dissolved easily at room temperature. The solutions were not able to dissolve gold, silver, rhodium and platinum.

Removal of Cd(II), Zn(II) and Pb(II) from aqueous solutions by brown marine macro algae: kinetic modelling

Specific marine macro algae species abundant at the Portuguese coast (Laminaria hyperborea, Bifurcaria bifurcata, Sargassum muticum and Fucus spiralis) were shown to be effective for removing toxic metals (Cd(II), Zn(II) and Pb(II)) from aqueous solutions. The initial metal concentrations in solution were about 75–100 mg L−1. The observed biosorption capacities for cadmium, zinc and lead ions were in the ranges of 23.9–39.5, 18.6–32.0 and 32.3–50.4 mg g−1, respectively. Kinetic studies revealed that the metal uptake rate was rather fast, with 75% of the total amount occurring in the first 10 min for all algal species. Experimental data were well fitted by a pseudo-second order rate equation. The contribution of internal diffusion mechanism was significant only to the initial biosorption stage. Results indicate that all the studied macro algae species can provide an efficient and cost-effective technology for eliminating heavy metals from industrial effluents.

Reabilitação de um edifício – Rua Azevedo Coutinho

Este trabalho teve como objectivo o estudo de uma acção de conservação/reabilitação de um edifício, localizado na rua Azevedo Coutinho na zona do Porto. Trata-se, portanto, de um trabalho académico que visa efectuar uma proposta de acções correctivas a implementar num edifício habitacional, onde foram detectadas anomalias. Esta monografia encontra-se dividida em dois capítulos, onde, o primeiro faz uma abordagem teórica, muito breve e sucinta, às matérias correntemente utilizadas no segundo capitulo. Dando também algumas noções e definições de alguns termos utilizados neste ramo da construção. A segunda parte do trabalho consiste no estudo do caso prático do edifício onde serão implementados processos metodológicos definidos no primeiro capítulo. De forma a implementar esta metodologia, apresenta-se, então, um edifício construído em meados de 1975, que apresenta ligeiros sinais de degradação que sugerem a uma possível acção de intervenção em alguns dos seus componentes. Sumariamente, pretendeu-se identificar as várias manifestações anómalas do interior e exterior do edifício, procurando associar as mesmas. Neste sentido, esta metodologia fundamenta-se num estudo de documentação técnica, fotográfica e histórica do edifício onde se procurou recolher o mais detalhadamente possível todas as informações essenciais para o estudo, incluindo informações por parte dos seus residentes. Com base neste conjunto de informação foi possível realizar um diagnóstico credível, apesar de não ser completamente conclusivo. Procurou-se listar as possíveis causas que desencadearam o aparecimento das anomalias, propondo finalmente um conjunto de soluções para a conservação/reabilitação do edifício. Esta proposta de intervenção contempla um conjunto de recomendações, que norteiam a definição de soluções para a conservação/reabilitação do interior do edifício e da sua fachada, de forma a se garantir que as mesmas assegurem resultados satisfatórios a longo prazo.

Recycling of pultrusion production waste into innovative concrete-polymer composite solutions

In this study, the added value resultant from the incorporation of pultrusion production waste into polymer based concretes was assessed. For this purpose, different types of thermoset composite scrap material, proceeding from GFRP pultrusion manufacturing process, were mechanical shredded and milled into a fibrous-powdered material. Resultant GFRP recyclates, with two different size gradings, were added to polyester based mortars as fine aggregate and filler replacements, at various load contents between 4% up to 12% in weight of total mass. Flexural and compressive loading capacities were evaluated and found better than those of unmodified polymer mortars. Obtained results highlight the high potential of recycled GFRP pultrusion waste materials as efficient and sustainable admixtures for concrete and mortar-polymer composites, constituting an emergent waste management solution.

Investigation on AUTOSAR-Compliant Solutions for Many-Core Architectures

As of today, AUTOSAR is the de facto standard in the automotive industry, providing a common software architec- ture and development process for automotive applications. While this standard is originally written for singlecore operated Elec- tronic Control Units (ECU), new guidelines and recommendations have been added recently to provide support for multicore archi- tectures. This update came as a response to the steady increase of the number and complexity of the software functions embedded in modern vehicles, which call for the computing power of multicore execution environments. In this paper, we enumerate and analyze the design options and the challenges of porting AUTOSAR-based automotive applications onto multicore platforms. In particular, we investigate those options when considering the emerging many- core architectures that provide a more scalable environment than the traditional multicore systems. Such platforms are suitable to enable massive parallel execution, and their design is more suitable for partitioning and isolating the software components.