Implementação de um sistema seguro, robusto e redundante

Um dos temas mais debatidos na sociedade actual é a segurança. Os níveis de segurança e as ferramentas para os alcançar entram em contraponto com os métodos usados para os quebrar. Como no passado, a razão qualidade/serviço mantém-se hoje, e manter-se-á no futuro, assegurando maior segurança àqueles que melhor se protejam. Problemas simples da vida real como furtos ou uso de falsa identidade assumem no meio informático uma forma rápida e por vezes indetectável de crime organizado. Neste estudo são investigados métodos sociais e aplicações informáticas comuns para quebrar a segurança de um sistema informático genérico. Desta forma, e havendo um entendimento sobre o Modus Operandi das entidades mal-intencionadas, poderá comprovar-se a instabilidade e insegurança de um sistema informático, e, posteriormente, actuar sobre o mesmo de tal forma que fique colocado numa posição da segurança que, podendo não ser infalível, poderá estar muito melhorada. Um dos objectivos fulcrais deste trabalho é conseguir implementar e configurar um sistema completo através de um estudo de soluções de mercado, gratuitas ou comerciais, a nível da implementação de um sistema em rede com todos os serviços comuns instalados, i.e., um pacote “chave na mão” com serviços de máquinas, sistema operativo, aplicações, funcionamento em rede com serviços de correio electrónico, gestão empresarial, anti-vírus, firewall, entre outros. Será possível então evidenciar uma instância de um sistema funcional, seguro e com os serviços necessários a um sistema actual, sem recurso a terceiros, e sujeito a um conjunto de testes que contribuem para o reforço da segurança.

Renewable-based generation integration in electricity markets with virtual power producers

The development of renewable energy sources and Distributed Generation (DG) of electricity is of main importance in the way towards a sustainable development. However, the management, in large scale, of these technologies is complicated because of the intermittency of primary resources (wind, sunshine, etc.) and small scale of some plants. The aggregation of DG plants gives place to a new concept: the Virtual Power Producer (VPP). VPPs can reinforce the importance of these generation technologies making them valuable in electricity markets. VPPs can ensure a secure, environmentally friendly generation and optimal management of heat, electricity and cold as well as optimal operation and maintenance of electrical equipment, including the sale of electricity in the energy market. For attaining these goals, there are important issues to deal with, such as reserve management strategies, strategies for bids formulation, the producers’ remuneration, and the producers’ characterization for coalition formation. This chapter presents the most important concepts related with renewable-based generation integration in electricity markets, using VPP paradigm. The presented case studies make use of two main computer applications:ViProd and MASCEM. ViProd simulates VPP operation, including the management of plants in operation. MASCEM is a multi-agent based electricity market simulator that supports the inclusion of VPPs in the players set.

Virtual power producers integration into MASCEM

All over the world Distributed Generation is seen as a valuable help to get cleaner and more efficient electricity. Under this context distributed generators, owned by different decentralized players can provide a significant amount of the electricity generation. To get negotiation power and advantages of scale economy, these players can be aggregated giving place to a new concept: the Virtual Power Producer. Virtual Power Producers are multi-technology and multi-site heterogeneous entities. Virtual Power Producers should adopt organization and management methodologies so that they can make Distributed Generation a really profitable activity, able to participate in the market. In this paper we address the integration of Virtual Power Producers into an electricity market simulator –MASCEM – as a coalition of distributed producers.

Acesso a laboratórios remotos via ambientes imersivos acesso remoto a um multímetro

Recentemente, tem-se assistido à utilização de ambientes imersivos 3D em vários domínios tais como: actividades empresariais, educativas, lúdicas, entre outras devido à expansão do Second Life. A finalidade deste conceito é oferecer aos utilizadores um acesso alternativo a valências existentes no mundo real, a partir de um computador ligado à Internet. Uma aplicação prática pode ser a sua utilização em laboratórios remotos, com a finalidade de controlar remotamente instrumentos de medição, a partir de um ambiente imersivo. Para isso, o mesmo deve permitir a construção de um laboratório virtual e respectivos instrumentos, também virtuais. Este tipo de solução é viável, devido a existirem dispositivos com interfaces de acesso remoto, e ambientes 3D desenvolvidos em linguagens de programação que possuem bibliotecas de código para protocolos de redes de computadores. A finalidade deste trabalho é desenvolver uma metodologia de acesso remoto, a instrumentos de medição em laboratórios de electricidade e electrónica, usando ambientes imersivos 3D. Como caso de estudo, o instrumento utilizado é um multímetro, controlado remotamente a partir de uma reprodução num mundo virtual, construído no ambiente 3D Open Wonderland. Nessa reprodução virtual, numa primeira fase, só serão disponibilizadas para medição, um conjunto limitado das variáveis eléctricas passíveis de medir através do multímetro seleccionado.

A realidade virtual como factor de atracção para a engenharia

O objectivo da Realidade Virtual é simples de entender mas muito difícil de implementar: criar ambientes completamente indiferenciáveis do mundo real com os quais se possa interagir de um modo natural. Desde a criação do Sensorama por Morton Heiling em 1962, passando pela difusão do conceito pelo público geral na década de 90 até os dias de hoje, a evolução da Realidade Virtual tem sido constante. Este conjunto de tecnologias tem estado envolvido por uma certa descrença por parte da sociedade, motivada pelas grandes expectativas que lhe foram atribuídas e pelo estado de desenvolvimento do hardware aquando do seu auge. No entanto, actualmente assiste-se a um ressurgimento do seu interesse no público geral com a introdução de imagem estereoscópica no cinema ou o sucesso dos controladores da consola Nintendo Wii. Hoje em dia as suas aplicações são muito variadas: desde o treino de pilotos de avião ao tratamento de fobias, passando pela industria do entretenimento e a visita virtual de locais com interesse histórico ou turístico. O objectivo desta tese de mestrado é explorar uma área que ainda não tem sido muito abrangida pela Realidade Virtual e que cobre também aspectos educacionais e lúdicos de modo a ser um factor de atracção para os estudantes do ensino secundário: a simulação de instrumentos musicais. Para tal foi implementado um sistema capaz de simular instrumentos musicais de percussão (uma bateria) utilizando imagem estereoscópica, som posicional e interfaces com o utilizador realistas. Os resultados obtidos nas sessões de avaliação efectuadas por alunos recentemente ingressados no ensino superior demonstram que o sistema desenvolvido, bem como a inovação em interfaces do utilizador com os dispositivos electrónicos de uma forma geral, constituem um meio efectivo na sua motivação para a escolha de um curso na área da engenharia.

Supporting real-time distributed computer-controlled systems with multi-hop P-NET networks

Fieldbus communication networks aim to interconnect sensors, actuators and controllers within process control applications. Therefore, they constitute the foundation upon which real-time distributed computer-controlled systems can be implemented. P-NET is a fieldbus communication standard, which uses a virtual token-passing medium-access-control mechanism. In this paper pre-run-time schedulability conditions for supporting real-time traffic with P-NET networks are established. Essentially, formulae to evaluate the upper bound of the end-to-end communication delay in P-NET messages are provided. Using this upper bound, a feasibility test is then provided to check the timing requirements for accessing remote process variables. This paper also shows how P-NET network segmentation can significantly reduce the end-to-end communication delays for messages with stringent timing requirements.

A communication support for real-time distributed computer controlled systems

In this paper, we analyse the ability of P-NET [1] fieldbus to cope with the timing requirements of a Distributed Computer Control System (DCCS), where messages associated to discrete events should be made available within a maximum bound time. The main objective of this work is to analyse how the network access and queueing delays, imposed by P-NET’s virtual token Medium Access Control (MAC) mechanism, affect the realtime behaviour of the supported DCCS.

A flexibility reference model to achieve leagility in virtual organizations

The paper proposes a Flexibility Requirements Model and a Factory Templates Framework to support the dynamic Virtual Organization decision-makers in order to reach effective response to the emergent business opportunities ensuring profitability. Through the construction and analysis of the flexibility requirements model, the network managers can achieve and conceive better strategies to model and breed new dynamic VOs. This paper also presents the leagility concept as a new paradigm fit to equip the network management with a hybrid approach that better tackle the performance challenges imposed by the new and competitive business environments.

IX International conference on Remote Engineering and Virtual instrumentation REV 2012

THE ninth edition of the International Conference on Remote Engineering and Virtual Instrumentation (REV) [1] was held at the Faculty of Engineering of the University of Deusto, Bilbao (Spain), from the 4th to the 6th of July, 2012. A world-class research community in the subject of remote and virtual laboratories joined the event.

Reshaping higher education systems in the MENA region: the contribution of remote and virtual labs

Learning is not only happening in school or university; it is also an important aspect of the daily life that allows students to remain in their biological and physical environment helping to reshape it, by applying what they have learnt. Today, the higher education sector is a part of important strategies used by countries in order to foster their development. Despite its geographical location, i.e. its closeness to Europe and Asia, the MENA (Middle East and North Africa) region still needs an integrated strategy for the advancement, reform, and update of its higher educational landscape. Although some solutions have been experimented in the region in the field of higher education, they have not been able to raise the quality of education to the level comparable that observed in developed countries. In other words, many MENA higher education systems are facing problems, for which solution ought to be sought. We analyse the situation of higher education systems in the MENA countries and the factors that affect the delay in achieving the level of education existing in other world regions, e.g. Europe, especially in the higher education sector. During the discussion, the impact of new technology-enhanced tools, such as remote laboratories, in the process of development and consolidation of MENA universities, is particularly stressed.

Towards high-available and energy-efficient virtual computing environments in the cloud

Empowered by virtualisation technology, cloud infrastructures enable the construction of flexi- ble and elastic computing environments, providing an opportunity for energy and resource cost optimisation while enhancing system availability and achieving high performance. A crucial re- quirement for effective consolidation is the ability to efficiently utilise system resources for high- availability computing and energy-efficiency optimisation to reduce operational costs and carbon footprints in the environment. Additionally, failures in highly networked computing systems can negatively impact system performance substantially, prohibiting the system from achieving its initial objectives. In this paper, we propose algorithms to dynamically construct and readjust vir- tual clusters to enable the execution of users’ jobs. Allied with an energy optimising mechanism to detect and mitigate energy inefficiencies, our decision-making algorithms leverage virtuali- sation tools to provide proactive fault-tolerance and energy-efficiency to virtual clusters. We conducted simulations by injecting random synthetic jobs and jobs using the latest version of the Google cloud tracelogs. The results indicate that our strategy improves the work per Joule ratio by approximately 12.9% and the working efficiency by almost 15.9% compared with other state-of-the-art algorithms.

Maximizing the Social Welfare of Virtual Power Players Operation in Case of Excessive Wind Power

The integration of growing amounts of distributed generation in power systems, namely at distribution networks level, has been fostered by energy policies in several countries around the world, including in Europe. This intensive integration of distributed, non-dispatchable, and natural sources based generation (including wind power) has caused several changes in the operation and planning of power systems and of electricity markets. Sometimes the available non-dispatchable generation is higher than the demand. This generation must be used; otherwise it is wasted if not stored or used to supply additional demand. New policies and market rules, as well as new players, are needed in order to competitively integrate all the resources. The methodology proposed in this paper aims at the maximization of the social welfare in a distribution network operated by a virtual power player that aggregates and manages the available energy resources. When facing a situation of excessive non-dispatchable generation, including wind power, real time pricing is applied in order to induce the increase of consumption so that wind curtailment is minimized. This method is especially useful when actual and day-ahead resources forecast differ significantly. The distribution network characteristics and concerns are addressed by including the network constraints in the optimization model. The proposed methodology has been implemented in GAMS optimization tool and its application is illustrated in this paper using a real 937-bus distribution network with 20.310 consumers and 548 distributed generators, some of them non-dispatchable and with must take contracts. The implemented scenario corresponds to a real day in Portuguese power system.

Coalition of distributed generation units to Virtual Power Players - a game theory approach

Smart Grids (SGs) have emerged as the new paradigm for power system operation and management, being designed to include large amounts of distributed energy resources. This new paradigm requires new Energy Resource Management (ERM) methodologies considering different operation strategies and the existence of new management players such as several types of aggregators. This paper proposes a methodology to facilitate the coalition between distributed generation units originating Virtual Power Players (VPP) considering a game theory approach. The proposed approach consists in the analysis of the classifications that were attributed by each VPP to the distributed generation units, as well as in the analysis of the previous established contracts by each player. The proposed classification model is based in fourteen parameters including technical, economical and behavioural ones. Depending of the VPP strategies, size and goals, each parameter has different importance. VPP can also manage other type of energy resources, like storage units, electric vehicles, demand response programs or even parts of the MV and LV distribution network. A case study with twelve VPPs with different characteristics and one hundred and fifty real distributed generation units is included in the paper.

Multidimensional Scalling Analysis of the World Economy During the Period 1972-2012

The last 40 years of the world economy are analyzed by means of computer visualization methods. Multidimensional scaling and the hierarchical clustering tree techniques are used. The current Western downturn in favor of Asian partners may still be reversed in the coming decades.

Estratificação da interação com o utilizador em ambientes de Realidade Virtual

A evolução tecnológica tem sido de tal ordem que a realidade virtual deixou de ser um mero conceito que apenas é possível de implementar recorrendo a máquinas com um poder de processamento muito elevado. Tendo em conta o potencial da realidade virtual e a não existência de boas práticas na criação da interface de um sistema que use este conceito, pretende-se, nesta dissertação, fazer um estudo sobre como pode ser analisada e estruturada a componente de interação através da estratificação de níveis de interação para as diferentes operações do sistema pretendido. Por forma a ser possível, posteriormente, comparar cada um dos sistemas relativamente à interação, foram estipulados um conjunto de ações/operações que teriam de ser passíveis de executar em cada um, bem como, um tema base, uma aplicação de realidade virtual de simulação de espaço aplicada ao sector mobiliário. Depois de implementados os sistemas, estes foram apresentados a um conjunto de pessoas que foram inquiridas sobre os mesmos, por forma a avaliar a interação com cada um. Através dos resultados obtidos da avaliação dos inquéritos entregues, foi possível concluir que, para uma grande parte das operações implementadas, existe uma preferência para que a realização da operação seja o mais similar à sua execução num contexto real.