A framework for fault tolerant real time systems based on reconfigurable FPGAs

To increase the amount of logic available to the users in SRAM-based FPGAs, manufacturers are using nanometric technologies to boost logic density and reduce costs, making its use more attractive. However, these technological improvements also make FPGAs particularly vulnerable to configuration memory bit-flips caused by power fluctuations, strong electromagnetic fields and radiation. This issue is particularly sensitive because of the increasing amount of configuration memory cells needed to define their functionality. A short survey of the most recent publications is presented to support the options assumed during the definition of a framework for implementing circuits immune to bit-flips induction mechanisms in memory cells, based on a customized redundant infrastructure and on a detection-and-fix controller.

Educational characteristics of adult students in portuguese technological schools

Despite a massive expansion of education in Portugal, since the 1970’s, educational attainment of the adult population in the country remains low. The numbers of working-age people in some form of continuing education are among the lowest, according to the OECD and EU-27 statistics. Technological Schools(TS), initially created in the 1990’s, under the umbrella of the Ministry of Economy in partnership with industry and industrial associations, aimed to prepare qualified staff for industries and services in the country, particularly in the engineering sector, through the provision of post secondary non-university programmes of studies, the CET (Technological Specialization Courses). Successful CET students are awarded a DET(Diploma of Technological Specialization), which corresponds to Vocational Qualification level IV of the EU, according to the latest alteration (2005) of the Education Systems Act (introduced in 1986). In this, CET’s are also clearly defined as one of the routes for access to Higher Education (HE), in Portugal. The PRILHE (Promoting Reflective and Independent Learning in Higher Education) multinational project, funded by the European Socrates Grundtvig Programme, aimed to identify the learning processes which enable adult students in higher education to become autonomous reflective learners and search best practices to support these learning processes. During this research, both quantitative and qualitative methods were used to determine how students organise their studies and develop their learning skills. The Portuguese partner in the project’ consortium used a two case studies approach, one with students of Higher Education Institutions and other with students of TS. This paper only applies to students of TS, as these have a predominant bias towards engineering. Results show that student motivation and professional teaching support contribute equally to the development of an autonomous and reflective approach to learning in adult students; this is essential for success in a knowledge economy, where lifelong learning is the key to continuous employment.

Corporate brand identity management in a technological faculty – how brand relationships influence students and companies reputations

Identity is traditionally defined as an emission concept [1]. Yet, some research points out that there are external factors that can influence it [2]; [3]; [4]. This subject is even more relevant if one considers corporate brands. According to Aaker [5] the number, the power and the credibility of corporate associations are bigger in the case of corporate brands. Literature recognizes the influence of relationships between companies in identity management. Yet, given the increasingly important role of corporate brands, it is surprising that to date no attempt to evaluate that influence has been made in the management of corporate brand identity. Also Keller and Lehman [6] highlight relationships and costumer experience as two areas requiring more investigation. In line with this, the authors intend to develop an empirical research in order to evaluate the influence of relationships between brands in the identity of corporate brand from an internal perspective by interviewing internal stakeholders (brand managers and internal clients). This paper is organized by main contents: theoretical background, research methodology, data analysis and conclusions and finally cues to future investigation.

A case study on the eco-efficiency performance of a composite processing industry: evaluation and quantification of potential improvements

In this study, an attempt was made in order to measure and evaluate the eco-efficiency performance of a pultruded composite processing company. For this purpose the recommendations of World Business Council for Sustainable Development (WCSD) and the directives of ISO 14301 standard were followed and applied. The main general indicators of eco-efficiency, as well as the specific indicators, were defined and determined. With basis on indicators’ figures, the value profile, the environmental profile, and the pertinent eco-efficiency ratios were established and analyzed. In order to evaluate potential improvements on company eco-performance, new indicators values and eco-efficiency ratios were estimated taking into account the implementation of new proceedings and procedures, at both upstream and downstream of the production process, namely: i) Adoption of a new heating system for pultrusion die-tool in the manufacturing process, more effective and with minor heat losses; ii) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

Assessing the eco-efficiency of a composite processing industry: evaluation and quantification of potential improvements’

In this study, an attempt was made in order to measure and evaluate the eco-efficiency performance of a pultruded composite processing company. For this purpose the recommendations of World Business Council for Sustainable Development (WCSD) and the directives of ISO 14301 standard were followed and applied. The main general indicators of eco-efficiency, as well as the specific indicators, were defined and determined. With basis on indicators’ figures, the value profile, the environmental profile, and the pertinent ecoefficiency’s ratios were established and analyzed. In order to evaluate potential improvements on company eco-performance, new indicators values and eco-efficiency ratios were estimated taking into account the implementation of new proceedings and procedures, both in upstream and downstream of the production process, namely: a) Adoption of new heating system for pultrusion die in the manufacturing process, more effective and with minor heat losses; c) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

Data analysis applied to the evaluation of a technological nature teaching model as a regional development tool

This paper presents the creation and development of technological schools directly linked to the business community and to higher public education. Establishing themselves as the key interface between the two sectors they make a signigicant contribution by having a greater competitive edge when faced with increasing competition in the tradional markets. The development of new business strategies supported by references of excellence, quality and competitiveness also provides a good link between the estalishment of partnerships aiming at the qualification of education boards at a medium level between the technological school and higher education with a technological foundation. We present a case study as an example depicting the success of Escola Tecnológica de Vale de Cambra.

Gestão de solventes nas atividades de revestimento e formulação de tintas

O presente trabalho teve como objetivo a realização de um plano de gestão de solventes e sua análise para propor melhorias no cumprimento dos valores legalmente impostos. Foram realizados dois planos distintos, um referente à indústria de revestimento e outro à indústria de formulação de tintas. As abordagens na realização e análise de resolução de problemas são distintas, uma vez que os limites legais são diferentes em ambos os casos. Os componentes que apresentam uma maior expressão face ao plano de gestão de solventes são os compostos orgânicos voláteis (COVs), e é a partir destes componentes que se efetuou toda a análise. Inicialmente foi necessário conhecer todo o funcionamento de cada empresa, os procedimentos adotados, a utilização dos produtos e as técnicas operacionais. Determinaram-se os pontos críticos na avaliação dos problemas que se verificaram nos planos de gestão de solventes e analisaram-se as possibilidades técnicas e tecnológicas passiveis de utilização para a resolução ou minimização desses problemas principalmente na empresa A que excede o limite legalmente imposto. As possibilidades centram-se a nível tecnológico de equipamentos e em produtos utilizados em ambos os casos.

Melhoria e automação de linhas de montagem

Hoje em dia, e com os avanços tecnológicos a surgirem de forma constante, existem novas áreas que têm de ser consideradas com um foco importante por parte de todas as organizações, sendo uma delas a robótica industrial. Motivada em aumentar o seu output, as condições de trabalho para os seus colaboradores, bem como todas as condições de organização da logística interna, a Grohe Portugal, mais especificamente o departamento da montagem, achou relevante fazer um estudo de métodos e tempos, calculando os ganhos potenciais de aumento de output com introdução de robótica nas linhas dos cartuchos. Os objetivos principais seriam então, fazer uma restruturação de todo o layout dessas linhas, tendo como foco automatizar alguma(s) operação(ões), conseguindo assim uma melhoria significativa do output dessas linhas com o menor payback possível. Posto isto, esta dissertação pretende apresentar o trabalho desenvolvido junto da Grohe Portugal, que teve como objetivo fazer os estudos e a automatização de linhas de montagem de cartuchos, bem como melhorar algumas linhas de montagem tendo em conta fatores ergonómicos. Relativamente à automatização da linha dos cartuchos, foi importante estudar todos os seguintes aspetos:  utilização de unidades robóticas;  ergonomia;  ganhos de produtividade;  automatizar ou semi-automatizar operações;  simplificar processos de montagem;  simplificar setups;  solicitar orçamentos;  elaborar caderno de encargos. Para a realização deste projeto, o trabalho desenvolvido foi decomposto em várias etapas, entre as quais se destacam:  análise e estudo dos métodos e sequências de montagem;  levantamento de todos os componentes e operações de montagem até à obtenção do cartucho final;  estudo de tempos de todas essas operações de montagem;  caraterização de um novo layout para as linhas com a introdução de unidades robóticas, tanto quanto possível, mais adequadas;  elaboração de caderno de encargos para ser enviado a empresas, para estas poderem apresentar uma orçamentação, bem como indicar as unidades robóticas mais adequadas para as tarefas pretendidas;  automatização da linha dos cartuchos. Relativamente ao projeto de novas linhas de montagem tendo em conta fatores ergonómicos, de forma a melhorar os sistemas de abastecimento e as condições de trabalho por parte dos operadores, foram postos em prática diferentes passos, nomeadamente:  identificação de todos os processos de montagem realizados pelos operadores na linha a melhorar;  estudo e definição da disposição dos componentes na nova linha, bem como a sua forma de abastecimento;  projeto da nova linha de montagem em 3D com recurso ao software SolidWorks;  realização prática da linha, acompanhando e ajudando a equipa da ferramentaria. O balanço final do trabalho foi bastante positivo, tanto na automatização das linhas de montagem dos cartuchos, em que todo o seu estudo foi alcançado com sucesso, como no melhoramento ergonómico das linhas de montagem, tendo-se alcançado melhorias em alguns índices de qualidade, tempos de abastecimento, organização das linhas, e nas condições de iluminação, resultando essas melhorias numa avaliação positiva por parte dos colaboradores que nelas trabalham todos os dias.