Estratégia de internacionalização das empresas competências na exportação e enquadramento no direito aduaneiro

Dissertação apresentada ao Instituto Superior de Contabilidade e Administração do Porto para a obtenção do Grau de Mestre em Empreendedorismo e Internacionalização

Auto-determinação e inclusão social das pessoas com deficiência mental - uma intervenção centrada no sujeito

Dotar as pessoas com deficiência mental com competências para se autodeterminarem e terem a oportunidade de concretizar a sua plena inclusão social, é um desafio colocado à sociedade actual. Torna-se importante colocar em prática o que diferentes autores e organizações como a American Association of Mental Retardation defendem, criando condições para que os profissionais, famílias e comunidade possam ser os facilitadores deste processo. Neste sentido foi implementado no Centro de Reabilitação de Ponte de Lima um modelo de intervenção específico baseado na promoção e desenvolvimento da autonomia pessoal, social e de realização da pessoa com deficiência mental e criado um instrumento de observação e registo que reflecte essa forma de intervenção designado por Protocolo de Registo e Avaliação de Competências - PRAC. Neste estudo realizou-se uma análise ao instrumento em causa, pretendendo dar um contributo para a sua posterior validação. Nesse sentido, utilizou-se uma metodologia qualitativa e quantitativa para analisar se o instrumento pode ou não ser considerado representativo da capacidade de autodeterminação; se é estável quando utilizado por mais que um utilizador; se descrimina os indivíduos com maior ou menor autonomia e se os itens quando sujeitos à análise factorial, evidenciam os constructos teóricos previamente traçados. Muito embora o PRAC tenha sido pensado e estruturado para pessoas com deficiência mental, neste estudo foi utilizado por um grupo diversificado de profissionais oriundos de áreas distintas o que veio comprovar que o instrumento pode ser utilizado em diferentes contextos e com público-alvo mais alargado. Os resultados evidenciados são consistentes, permitindo respostas positivas às questões elaboradas, é de referir contudo que necessitam de um maior aprofundamento de forma a estabelecer outro tipo de generalizações.

O reconhecimento e a mensuração dos activos fixos tangíveis

Dissertação para obtenção do Grau de Mestre em Contabilidade e Finanças Orientador: Professor Doutor, José Manuel Veiga Pereira

Interpretando a contabilidade pública em Portugal: o caso de um município de média dimensão

O Plano Oficial de Contabilidade das Autarquias Locais (POCAL) encontra-se em vigor em Portugal há oito anos. O anuário financeiro dos municípios portugueses, baseado nas contas das 308 autarquias nacionais, é um documento de inegável valor para a análise da informação agregada dos municípios sobre a sua situação orçamental, financeira, económica e patrimonial. Nestes termos, o estudo sintetiza os resultados de um trabalho de investigação cujo principal objectivo foi o de cotejar a informação proporcionada pelo último anuário financeiro (de 2008), com aquela apresentada por um município em particular — Oliveira do Hospital (distrito de Coimbra). Com base num conjunto de indicadores procurou-se efectuar uma comparação com os parâmetros médios nacionais. As fontes de informação referem-se aos principais documentos de reporte, relativos a 2007, 2008 e 2009, recolhidos por meio de requerimento dirigido ao Presidente da Câmara Municipal e a dados do Instituto Nacional de Estatística. A metodologia implicou o tratamento, a agregação e o confronto da informação do município com a do anuário financeiro de 2008. Os resultados indicam que a autarquia parece dar preferência à informação orçamental em detrimento da patrimonial, económica e financeira.

Remediation of sandy soils contaminated with hydrocarbons and halogenated hydrocarbons by soil vapour extraction

This paper presents the study of the remediation of sandy soils containing six of the most common contaminants (benzene, toluene, ethylbenzene, xylene, trichloroethylene and perchloroethylene) using soil vapour extraction (SVE). The influence of soil water content on the process efficiency was evaluated considering the soil type and the contaminant. For artificially contaminated soils with negligible clay contents and natural organic matter it was concluded that: (i) all the remediation processes presented efficiencies above 92%; (ii) an increase of the soil water content led to a more time-consuming remediation; (iii) longer remediation periods were observed for contaminants with lower vapour pressures and lower water solubilities due to mass transfer limitations. Based on these results an easy and relatively fast procedure was developed for the prediction of the remediation times of real soils; 83% of the remediation times were predicted with relative deviations below 14%.

Sequential application of soil vapor extraction and bioremediation processes for the remediation of ethylbenzene-contaminated soils

Soil vapor extraction (SVE) is an efficient, well-known and widely applied soil remediation technology. However, under certain conditions it cannot achieve the defined cleanup goals, requiring further treatment, for example, through bioremediation (BR). The sequential application of these technologies is presented as a valid option but is not yet entirely studied. This work presents the study of the remediation of ethylbenzene (EB)-contaminated soils, with different soil water and natural organic matter (NOMC) contents, using sequential SVE and BR. The obtained results allow the conclusion that: (1) SVE was sufficient to reach the cleanup goals in 63% of the experiments (all the soils with NOMC below 4%), (2) higher NOMCs led to longer SVE remediation times, (3) BR showed to be a possible and cost-effective option when EB concentrations were lower than 335 mg kgsoil −1, and (4) concentrations of EB above 438 mg kgsoil −1 showed to be inhibitory for microbial activity.

Efeitos de dois programas de exercício na endurance de tronco, controlo lombo-pélvico, perceção de dor lombar e fadiga, funcionalidade e qualidade de vida: Pilates Clínico vs Exercícios segundo McGill

Introdução: A lombalgia crónica assume uma elevada prevalência e graves repercussões a nível socioeconómico, sendo inúmeras as abordagens terapêuticas para o seu tratamento e prevenção. Existindo forte evidência da eficácia dos exercícios terapêuticos no seu tratamento, importa saber quais os mais efetivos. Objectivos: Comparar a efetividade de dois programas de exercício terapêutico na endurance do tronco, no controlo lombo-pélvico, na perceção de dor lombar e fadiga, na funcionalidade e na qualidade de vida em mulheres com lombalgia crónica não especifica, cuidadoras de idosos. Métodos: 24 mulheres foram divididas aleatoriamente em três grupos de 8. Durante 6 semanas, um grupo serviu de controlo (GC) e os outros dois grupos realizaram um programa de exercícios: Pilates Clínico (GP) ou exercícios segundo McGill (GM), com os outcomes medidos em ternos de endurance de tronco pelos testes de McGill, controlo lombo-pélvico pelos testes Active Straight Leg Raise e teste de controlo lombo-pélvico segundo McGill, dor lombar pela Numerical Rating Scale, fadiga pela escala de Borg, funcionalidade através do Questionário de Incapacidade de Roland Morris e qualidade de vida através do Questionário de Estado de Saúde (SF36-V2). Resultados: Relativamente à endurance, verificaram-se diferenças entre grupos no rácio flexores/extensores (p=0,005), e no rácio lateroflexores à esquerda/extensores (p=0,027), sendo que o GP apresentou um rácio estatisticamente inferior ao GC em ambos. Não existiram diferenças estatisticamente significativas entre os 3 grupos no controlo lombo-pélvico, perceção de dor, fadiga e funcionalidade, apesar das melhorias observadas intra-grupos. Relativamente à qualidade de vida, a dimensão saúde em geral aumentou significativamente no GP (p=0,020) e a função social no GM (p=0,045). Conclusão: A implementação dos programas de exercício Pilates Clínico e Exercícios segundo McGill numa amostra de cuidadoras de idosos com lombalgia crónica não especifica, parece ter um efeito positivo quando comparados com os do grupo de controlo sobre a endurance do tronco, controlo lombo-pélvico, perceção de dor lombar e fadiga, funcionalidade e qualidade de vida.

Aquacultura: estudo das condições ambientais internas de uma instalação

A aquacultura desempenha, actualmente, um papel fundamental no abastecimento de proteína animal de elevada qualidade. Nesta dissertação foi elaborado um projecto de uma unidade de piscicultura semi-intensiva de enguia, robalo, dourada e linguado e em regime extensivo a ostra. A unidade está localizada na Ria de Aveiro, na propriedade Ilha do Poço, com uma área total de 54,3 hectares. A execução de um projecto de aquacultura é um trabalho multidisciplinar que necessita a mobilização de diferentes recursos e conhecimentos. Os projectos de aquicultura estão directamente relacionados com o local de instalação da unidade e podem ser negativamente afectados pela poluição, por factores económicos locais ou por factores sociais que coloquem em risco o sucesso desta actividade económica. O principal objectivo desta dissertação foi o estudo de crescimento das espécies, taxa de alimentação, qualidade da água à entrada e saída da aquicultura, o consumo de oxigénio pelas espécies e o oxigénio necessário para oxidar a amónia em nitrato, o estudo de arejamento pelo vento, a necessidade de arejamento mecânico nos tanques de engorda e por fim a análise de investimento do projecto. Os valores obtidos para o tempo de crescimento das espécies até atingir o peso comercial foram, para a enguia 2,25anos, para a dourada 1,5 anos, para o robalo 2 anos, para o linguado 2,25 anos e para a ostra 1ano. Os índices de conversão alimentar (ICA) obtidos para as espécies foram os seguintes: 1 para a enguia, 1,24 para o robalo, 1,2 para a dourada e 1,58 para o linguado. Relativamente à concentração de amónia nos tanques de engorda, a espécie robalo apresenta o maior valor (0,3mg/L) por tanque. O arejamento natural dos tanques apenas é conseguido se o vento tiver uma velocidade de 20m/s. Por essa razão, e para garantir o arejamento requerido, serão necessários pelo menos 46 arejadores mecânicos com potência de 6kW a funcionar 24/24 horas. Para a taxa ponderada obteve-se um valor de 11,80%. O valor obtido para o VAL foi de 2.036.862 € e para a TIR, de 27,95%. O tempo necessário para que o investidor efectue o reembolso do capital investido no projecto é de 5,5 anos. O índice de rentabilidade tem um valor de 1,83 o que significa que o projecto é rentável.

Contribution of traffic and tobacco smoke in the distribution of polycyclic aromatic hydrocarbons on outdoor and indoor PM2.5

Traffic emissions and tobacco smoke are considered two main sources of polycyclic aromatic hydrocarbons (PAHs) in indoor and outdoor air. In this study, the impact of these sources on the level of fine particulate matter (PM2.5) and on the distribution of 15 PAHs regarded as priority pollutants by the US-EPA on PM2.5 were evaluated and compared. Outdoor and indoor PM2.5 samples were collected during winter 2008 in Oporto city in Portugal, for sampling periods of 12 and 24 hours, respectively. The outdoor PM2.5 were sampled at one site directly influenced by traffic emissions and the indoor PM2.5 samples were collected at one home directly influenced by tobacco smoke and another one without smoke. A methodology based on microwave-assisted extraction and liquid chromatography with fluorescence detection was applied for the efficient PAHs determination in indoor and outdoor PM2.5. PAHs in indoor PM2.5 concentrations were significantly influenced by the presence of traffic and tobacco smoking emissions. The mean of ΣPAHs in the outdoor traffic PM2.5 was not significantly different from the value attained in the indoor without smoking site. The tobacco smoke increased significantly PAHs concentrations on average about 1000 times more, when compared with the outdoor profile samples suggesting that tobacco smoking may be the most important source of indoor PAHs pollution.

Analysis of polycyclic aromatic hydrocarbons in atmospheric particulate samples by microwaveassisted extraction and liquid chromatography

A methodology based on microwave-assisted extraction (MAE) and LC with fluorescence detection (FLD) was investigated for the efficient determination of 15 polycyclic aromatic hydrocarbons (PAHs) regarded as priority pollutants by the US Environmental Protection Agency and dibenzo(a,l)pyrene in atmospheric particulate samples. PAHs were successfully extracted from real outdoor particulate matter (PM) samples with recoveries ranging from 81.4±8.8 to 112.0±1.1%, for all the compounds except for naphthalene (62.3±18.0%) and anthracene (67.3±5.7%), under the optimum MAE conditions (30.0 mL of ACN for 20 min at 110ºC). No clean-up steps were necessary prior to LC analysis. LOQs ranging from 0.0054 ng/m3 for benzo( a)anthracene to 0.089 ng/m3 for naphthalene were reached. The validated MAE methodology was applied to the determination of PAHs from a set of real world PM samples collected in Oporto (north of Portugal). The sum of particulate-bound PAHs in outdoor PM ranged from 2.5 and 28 ng/m3.

Soil vapor extraction in sandy soils: influence of airflow rate

Airflow rate is one of the most important parameters for the soil vapor extraction of contaminated sites, due to its direct influence on the mass transfer occurring during the remediation process. This work reports the study of airflow rate influence on soil vapor extractions, performed in sandy soils contaminated with benzene, toluene, ethylbenzene, xylene, trichloroethylene and perchloroethylene. The objectives were: (i) to analyze the influence of airflow rate on the process; (ii) to develop a methodology to predict the remediation time and the remediation efficiency; and (iii) to select the most efficient airflow rate. For dry sandy soils with negligible contents of clay and natural organic matter, containing the contaminants previously cited, it was concluded that: (i) if equilibrium between the pollutants and the different phases present in the soil matrix was reached and if slow diffusion effects did not occur, higher airflow rates exhibited the fastest remediations, (ii) it was possible to predict the remediation time and the efficiency of remediation with errors below 14%; and (iii) the most efficient remediation were reached with airflow rates below 1.2 cm3 s 1 standard temperature and pressure conditions.

Determination of free furfuryl alcohol in foundry resins by chromatographic techniques

Two chromatographic methods, gas chromatography with flow ionization detection (GC–FID) and liquid chromatography with ultraviolet detection (LC–UV), were used to determine furfuryl alcohol in several kinds of foundry resins, after application of an optimised extraction procedure. The GC method developed gave feasibility that did not depend on resin kind. Analysis by LC was suitable just for furanic resins. The presence of interference in the phenolic resins did not allow an appropriate quantification by LC. Both methods gave accurate and precise results. Recoveries were >94%; relative standard deviations were ≤7 and ≤0.3%, respectively for GC and LC methods. Good relative deviations between the two methods were found (≤3%).

Evaluation of formaldehyde in foundry waste sands using liquid chromatography

The industrial manufacturing of metallic objects results in a high level of foundry waste sands that may contain toxic compounds such as formaldehyde. The formaldehyde content of foundry waste sands was evaluated by liquid chromatography. Samples were collected during various steps of the industrial processes. Results showed that the phenolic alkaline process generated waste sands with higher formaldehyde content than the furanic process; the highest value was 7.6×10-3% (w/w). In this work, formaldehyde content decreased with time in all of the samples studied, revealing that most formaldehyde was released to the occupational environment.

Influence of tobacco smoke on carcinogenic PAH composition in indoor PM10 and PM2.5

Because of the mutagenic and/or carcinogenic properties, Polycyclic Aromatic Hydrocarbons (PAH), have a direct impact on human population. Consequently, there is a widespread interest in analysing and evaluating the exposure to PAH in different indoor environments, influenced by different emission sources. The information on indoor PAH is still limited, mainly in terms of PAH distribution in indoor particles of different sizes; thus, this study evaluated the influence of tobacco smoke on PM10 and PM2.5 characteristics, namely on their PAH compositions, with further aim to understand the negative impact of tobacco smoke on human health. Samples were collected at one site influenced by tobacco smoke and at one reference (non-smoking) site using low-volume samplers; the analyses of 17 PAH were performed by Microwave Assisted Extraction combined with Liquid Chromatography (MAE–LC). At the site influenced by tobacco smoke PM concentrations were higher 650% for PM10, and 720% for PM2.5. When influenced by smoking, 4 ring PAH (fluoranthene, pyrene, and chrysene) were the most abundant PAH, with concentrations 4600–21 000% and 5100–20 800% higher than at the reference site for PM10 and PM2.5, respectively, accounting for 49% of total PAH (SPAH). Higher molecular weight PAH (5–6 rings) reached concentrations 300–1300% and 140–1700% higher for PM10 and PM2.5, respectively, at the site influenced by tobacco smoke. Considering 9 carcinogenic PAH this increase was 780% and 760% in PM10 and PM2.5, respectively, indicating the strong potential risk for human health. As different composition profiles of PAH in indoor PM were obtained for reference and smoking sites, those 9 carcinogens represented at the reference site 84% and 86% of SPAH in PM10 and PM2.5, respectively, and at the smoking site 56% and 55% of SPAH in PM10 and PM2.5, respectively. All PAH (including the carcinogenic ones) were mainly present in fine particles, which corresponds to a strong risk for cardiopulmonary disease and lung cancer; thus, these conclusions are relevant for the development of strategies to protect public health.

Outdoor and indoor benzene evaluation by GC-FID and GC-MS/MS

The evaluation of benzene in different environments such as indoor (with and without tobacco smoke), a city area, countryside, gas stations and near exhaust pipes from cars running on different types of fuels was performed. The samples were analyzed using gas chromatography (GC) with flame ionization detection (FID) and tandem mass spectrometric detection (MS/MS) (to confirm the identification of benzene in the air samples). Operating conditions for the GC-MS analysis were optimized as well as the sampling and sample preparation. The results obtained in this work indicate that i) the type of fuel directly influences the benzene concentration in the air. Gasoline with additives provided the highest amount of benzene followed by unleaded gasoline and diesel; ii) the benzene concentration in the gas station was always higher than the advisable limit established by law (5 μg m−3) and during the unloading of gasoline the achieved concentration was 8371 μg m−3; iii) the data from the countryside (Taliscas) and the urban city (Matosinhos) were below 5 μg m−3 except 5 days after a fire on a petroleum refinery plant located near the city; iv) it was proven that in coffee shops where smoking is allowed the benzene concentration is higher (6 μg m−3) than in coffee shops where this is forbidden (4 μg m−3). This method may also be helpful for environmental analytical chemists who use GC-MS/MS for the confirmation or/and quantification of benzene.