32 resultados para Reaction-diffusion models
em Instituto Politécnico do Porto, Portugal
Resumo:
Transdermal biotechnologies are an ever increasing field of interest, due to the medical and pharmaceutical applications that they underlie. There are several mathematical models at use that permit a more inclusive vision of pure experimental data and even allow practical extrapolation for new dermal diffusion methodologies. However, they grasp a complex variety of theories and assumptions that allocate their use for specific situations. Models based on Fick's First Law found better use in contexts where scaled particle theory Models would be extensive in time-span but the reciprocal is also true, as context of transdermal diffusion of particular active compounds changes. This article reviews extensively the various theoretical methodologies for studying dermic diffusion in the rate limiting dermic barrier, the stratum corneum, and systematizes its characteristics, their proper context of application, advantages and limitations, as well as future perspectives.
Resumo:
The idiomatic expression “In Rome be a Roman” can be applied to leadership training and development as well. Leaders who can act as role models inspire other future leaders in their behaviour, attitudes and ways of thinking. Based on two examples of current leaders in the fields of Politics and Public Administration, I support the idea that exposure to role models during their training was decisive for their career paths and current activities as prominent characters in their profession. Issues such as how students should be prepared for community or national leadership as well as cross-cultural engagement are raised here. The hypothesis of transculturalism and cross-cultural commitment as a factor of leadership is presented. Based on current literature on Leadership as well as the presented case studies, I expect to raise a debate focusing on strategies for improving leaders’ training in their cross-cultural awareness.
Resumo:
O objetivo deste estudo consiste em avaliar a atividade antimicrobiana da quinoxalina 1,4-dióxido e alguns dos seus derivados em estirpes bacterianas e leveduras. Os compostos estudados foram a quinoxalina 1,4-dióxido (QNX), 2-metilquinoxalina-1,4-dióxido (2MQNX), 2-metil-3-Benzoilquinoxalina-1,4-dióxido (2M3BenzoilQNX), 2-metil-3-benzilquinoxalina-1,4-dióxido (2M3BQNX), 2-amino-3-cianoquinoxalina-1,4-dióxido (2A3CQNX), 3-metil-2-quinoxalinacarboxamida-1,4-dióxido (3M2QNXC), 2-hidroxifenazina–N-dióxido (2HF) e 3-metil-N-(2-metilphenil)quinoxalinacarboxamida-1,4-dioxido (3MN(2MF)QNXC). Os modelos procariotas selecionados para este estudo foram o Staphylococcus aureus ATCC 6538, Staphylococcus aureus ATCC 6538P, Staphylococcus aureus ATCC 29213, Escherichia coli ATCC 25922, Escherichia coli S3R9, Escherichia coli S3R22, Escherichia coli TEM CTX-M9, Escherichia coli TEM-1, Escherichia coli AmpC MOX-2, Escherichia coli CTX-M2 e Escherichia coli CTX-M9. A Candida albicans ATCC 10231 e a Saccharomyces cerevisiae PYCC 4072 constituíram os modelos eucariotas deste estudo. Para os compostos químicos que apresentem atividade pelo método de difusão em disco, será determinada a Concentração Mínima Inibitória (CMI), bem como a viabilidade e o crescimento (na presença e na ausência dos compostos químicos). Os resultados deste estudo mostram atividade antimicrobiana para a maioria dos compostos estudados em todos os modelos procariotas Gram negativos, à exceção da E.coli CTX-M2 e CTX-M9 e nenhuma atividade nos modelos eucariotas. O estudo da viabilidade/curvas de morte em bactérias e num modelo eucariota (S.cerevisiae) sugerem que alguns destes compostos constituem potenciais drogas para a quimioterapia antibacteriana.
Resumo:
O documento em anexo encontra-se na versão post-print (versão corrigida pelo editor).
Resumo:
PURPOSE: To analyze and compare the Ground Reaction Forces (GRF), during the stance phase of walking in pregnant women in the 3rd trimester of pregnancy, and non pregnant women. METHODS: 20 women, 10 pregnant and 10 non pregnant, voluntarily took part in this study. GRF were measured (1000 Hz) using a force platform (BERTEC 4060-15), an amplifier (BERTEC AM 6300) and an analogical-digital converter of 16 Bits (Biopac). RESULTS: The study showed that there were significant differences among the two groups concerning absolute values of time of the stance phase. In what concerns to the normalized values the most significant differences were verified in the maximums values of vertical force (Fz3, Fz1) and in the impulse of the antero-posterior force (Fy2), taxes of growth of the vertical force, and in the period of time for the antero-posterior force (Fy) be null. CONCLUSIONS: It is easier for the pregnant to continue forward movement (push-off phase). O smaller growth rates in what concerns to the maximum of the vertical force (Fz1) for the pregnant, can be associated with a slower speed of gait, as an adaptation strategy to maintain the balance, to compensate the alterations in the position of her center of gravity due to the load increase. The data related to the antero-posterior component of the force (Fy), shows that there is a significant difference between the pregnant woman’s left foot and right foot, which accuses a different functional behavior in each one of the feet, during the propulsion phase (TS).
Resumo:
Long-term contractual decisions are the basis of an efficient risk management. However those types of decisions have to be supported with a robust price forecast methodology. This paper reports a different approach for long-term price forecast which tries to give answers to that need. Making use of regression models, the proposed methodology has as main objective to find the maximum and a minimum Market Clearing Price (MCP) for a specific programming period, and with a desired confidence level α. Due to the problem complexity, the meta-heuristic Particle Swarm Optimization (PSO) was used to find the best regression parameters and the results compared with the obtained by using a Genetic Algorithm (GA). To validate these models, results from realistic data are presented and discussed in detail.
Resumo:
Introdução: No futebol, a entorse lateral do tornozelo (ELT) destaca-se como sendo a lesão mais prevalente. Potenciada pela variedade de chuteiras disponíveis no mercado e pela crescente utilização de relvados sintéticos, a interação entre o terreno e o calçado tem assumido elevada relevância como fator de risco para a ELT. A maior incidência de lesões na 2ª parte do jogo traduz a necessidade do estudo dessa interação durante tarefas que envolvam fadiga. Objetivo: Estudar a influência das chuteiras em variáveis preditoras do risco de ELT em relvado sintético sob duas condições: sem e com fadiga dos músculos eversores do tornozelo Métodos: Foi utilizada uma amostra de atletas saudáveis. Todos os indivíduos realizaram 3 séries de 5 saltos médio-laterais uni-podálicos, cada uma com 1 de 3 modelos de chuteiras (Turf, Hard e Firm ground) em duas condições: sem e com fadiga induzida pelo dinamómetro isocinético. Durante a tarefa, a atividade eletromiográfica do longo e curto peroniais, o valor das forças de reação do solo e o movimento do retro-pé (plano frontal), foram recolhidos e usados para calcular variáveis cinemáticas (eversão/inversão do tornozelo, o deslocamento e velocidade do centro de pressão), cinéticas (taxa de crescimento das forças de reação do solo) e neuromusculares (tempo de ativação muscular dos peroniais). Resultados: À exceção do tempo de ativação do curto peronial com o modelo Hard ground (sem fadiga vs com fadiga (p=0,050), não foram identificadas diferenças estatisticamente significativas nas variáveis preditoras de lesão, entre chuteiras, nem entre as duas condições avaliadas. Conclusão: Para o teste funcional escolhido e executado por atletas saudáveis em sintético de 3ª geração, nenhuma das chuteiras apresenta maior risco de lesão (com e sem fadiga), tendo em conta as variáveis em estudo.
Resumo:
O óxido de polifenileno com a marca comercial PPO® é uma das resinas principais produzidas na SABIC IP e o ingrediente principal do plástico de engenharia com a marca registada, Noryl®. A equipa de tecnologia de processo de PPO® desenvolve uma série de novos produtos em reactores de pequena escala, tanto em Selkirk como em Bergen op Zoom. Para se efectuar uma transição rápida da escala laboratorial para a fábrica, é necessário um conhecimento completo do reactor. O objectivo deste projecto consiste em esboçar linhas gerais para o scale-up de novos produtos de PPO1, do laboratório para a escala industrial, baseado no estudo de um tipo de PPO, PPO 803. Este estudo pode ser dividido em duas fases. Numa primeira fase, as receitas e os perfis da reacção são comparados, de onde se retiram as primeiras conclusões. Posteriormente, com base nestas conclusões, é realizado um planeamento experimental. O estudo inicial sugeriu que a receita, a temperatura inicial do reactor e a velocidade do agitador poderiam influenciar o tempo da reacção bem como a queda da velocidade intrínseca do polímero (IV drop). As reacções experimentais mostraram que a receita é o principal factor que influencia, tanto o tempo de reacção, como a queda de viscosidade intrínseca. O tempo de reacção será tanto maior quanto menor a agitação devido à má dispersão do oxigénio na mistura. O uso de temperaturas iniciais elevadas conduz a uma queda maior da viscosidade intrínseca devido à desactivação do catalisador. O método experimental utilizado no laboratório de Bergen op Zoom é um bom exemplo, simulador, do procedimento utilizado na fábrica.
Resumo:
O presente estudo tem como objetivo comparar experimentalmente duas crianças praticantes de Hóquei em Patins, uma normal e uma com a patologia dos joelhos valgos, avaliando qualitativamente as diferenças posturais, estáticas e dinâmicas, decorrentes da utilização dos patins específicos desta modalidade, através do sistema de análise da Força de Reação do Solo (FRS), de Eletromiografia (EMG), de captura de movimento, e de modelação e simulação. Para atingir o objetivo definiu-se um protocolo de ensaios com as seguintes tarefas: repouso com e sem patins, marcha, corrida, deslizar com os dois pés apoiados e deslizar com o pé esquerdo levantado. No repouso avaliou-se a variação do ponto de aplicação da FRS da criança normal e patológica, com e sem patins. Ainda na tarefa de repouso avaliou-se também as componentes médio-lateral, antero-posterior individualmente e a componente vertical da FRS, juntamente com a atividade muscular dos músculos Gastrocnémio Medial (GM), Recto Femoral (RF), Vasto Medial (VM), Vasto Lateral (VL), Bicípete Femoral (BF), Semitendinoso (ST), Tensor da Fascia Lata (TFL), Gastrocnémio Lateral (GL), de forma a comparar os valores de intensidade de FRS e da atividade muscular dos diferentes instantes de tempo desta tarefa. Para as restantes tarefas apenas se avaliou individualmente as componentes médio-lateral e antero-posterior da FRS e a componente vertical da FRS juntamente com a atividade muscular dos referidos músculos, salientando as diferenças evidentes entre as curvas da criança normal e as curvas da criança patológica durante os diferentes instantes do movimento. Todas as tarefas referidas, exceto a tarefa de repouso com patins, foram ainda simuladas recorrendo a modelos músculo-esqueléticos. A partir destas simulações do movimento obtiveram-se os ângulos articulares e efetuou-se a respetiva análise. No final dos resultados obtidos apresentou-se uma tabela de resumo com o cálculo dos coeficientes de variação de cada grandeza, exceto nos gráficos da posição no espaço da FRS, onde se constatou que existe uma grande variabilidade inter-individuo em cada tarefa. A análise dos resultados de cada tarefa permite concluir que a utilização de patins pode trazer uma maior ativação muscular para a criança patológica, embora se verifique instabilidade articular. Apesar dessa instabilidade pode-se inferir que, uma maior ativação muscular decorrente da utilização de patins, tal como acontece na prática do hóquei em patins, pode trazer uma melhoria, a longo prazo, na estabilidade da articulação do joelho e na sustentação corporal, proporcionada pelo fortalecimento muscular.
Resumo:
The first and second authors would like to thank the support of the PhD grants with references SFRH/BD/28817/2006 and SFRH/PROTEC/49517/2009, respectively, from Fundação para a Ciência e Tecnol ogia (FCT). This work was partially done in the scope of the project “Methodologies to Analyze Organs from Complex Medical Images – Applications to Fema le Pelvic Cavity”, wi th reference PTDC/EEA- CRO/103320/2008, financially supported by FCT.
Resumo:
A new flow-injection analytical procedure is proposed for the determination of the total amount of polyphenols in wines; the method is based on the formation of a colored complex between 4-aminoantipyrine and phenols, in the presence of an oxidizing reagent. The oxidizing agents hexacyanoferrate(III), peroxodisulfate, and tetroxoiodate(VII) were tested. Batch trials were first performed to select appropriate oxidizing agents, pH, and concentration ratios of reagents, on the basis of their effect on the stability of the colored complex. Conditions selected as a result of these trials were implemented in a flow-injection analytical system in which the influence of injection volume, flow rate, and reaction- coil length, was evaluated. Under the optimum conditions the total amount of polyphenols, expressed as gallic acid, could be determined within a concentration range of 36 to 544 mg L–1, and with a sensitivity of 344 L mol–1 cm–1 and an RSD <1.1%. The reproducibility of analytical readings was indicative of standard deviations <2%. Interference from sugars, tartaric acid, ascorbic acid, methanol, ammonium sulfate, and potassium chloride was negligible. The proposed system was applied to the determination of total polyphenols in red wines, and enabled analysis of approximately 55 samples h–1. Results were usually precise and accurate; the RSD was <3.9% and relative errors, by the Folin–Ciocalteu method, <5.1%.
Resumo:
Zero valent iron (ZVI) has been extensively used as a reactive medium for the reduction of Cr(VI) to Cr(III) in reactive permeable barriers. The kinetic rate depends strongly on the superficial oxidation of the iron particles used and the preliminary washing of ZVI increases the rate. The reaction has been primarily modelled using a pseudo-first-order kinetics which is inappropriate for a heterogeneous reaction. We assumed a shrinking particle type model where the kinetic rate is proportional to the available iron surface area, to the initial volume of solution and to the chromium concentration raised to a power ˛ which is the order of the chemical reaction occurring at surface. We assumed α= 2/3 based on the likeness to the shrinking particle models with spherical symmetry. Kinetics studies were performed in order to evaluate the suitability of this approach. The influence of the following parameters was experimentally studied: initial available surface area, chromium concentration, temperature and pH. The assumed order for the reaction was confirmed. In addition, the rate constant was calculated from data obtained in different operating conditions. Digital pictures of iron balls were periodically taken and the image treatment allowed for establishing the time evolution of their size distribution.
Resumo:
In recent years several countries have set up policies that allow exchange of kidneys between two or more incompatible patient–donor pairs. These policies lead to what is commonly known as kidney exchange programs. The underlying optimization problems can be formulated as integer programming models. Previously proposed models for kidney exchange programs have exponential numbers of constraints or variables, which makes them fairly difficult to solve when the problem size is large. In this work we propose two compact formulations for the problem, explain how these formulations can be adapted to address some problem variants, and provide results on the dominance of some models over others. Finally we present a systematic comparison between our models and two previously proposed ones via thorough computational analysis. Results show that compact formulations have advantages over non-compact ones when the problem size is large.
Resumo:
This paper studies the effects of the diffusion of a General Purpose Technology (GPT) that spreads first within the developed North country of its origin, and then to a developing South country. In the developed general equilibrium growth model, each final good can be produced by one of two technologies. Each technology is characterized by a specific labor complemented by a specific set of intermediate goods, which are enhanced periodically by Schumpeterian R&D activities. When quality reaches a threshold level, a GPT arises in one of the technologies and spreads first to the other technology within the North. Then, it propagates to the South, following a similar sequence. Since diffusion is not even, neither intra- nor inter-country, the GPT produces successive changes in the direction of technological knowledge and in inter- and intra-country wage inequality. Through this mechanism the different observed paths of wage inequality can be accommodated.