Inventário hidrogeológico e dos potenciais focos de contaminação nas bacias hidrográficas da Asprela e Massarelos: implicações no ciclo hidrológico urbano

O desenvolvimento incessante em áreas urbanas ameaça a qualidade e quantidade das águas subterrâneas. O Porto é uma cidade densamente urbanizada, dominada por granitos, os quais constituem um meio fraturado anisotrópico e heterogéneo. O principal objetivo desta dissertação foi realçar a importância da cartografia hidrogeológica, bem como a relevância de realizar inventários hidrogeológicos e de potenciais focos de contaminação para compreender a vulnerabilidade dos sistemas aquíferos na cidade do Porto. Para tal, foram selecionadas as bacias hidrográficas da Asprela e de Massarelos. Assim, foram levados a cabo dois inventários, um hidrogeológico e outro das potenciais atividades de contaminação. O estudo foi apoiado pelos Sistemas de Informação Geográfica (SIG), os quais foram fundamentais para um melhor conhecimento e integração nas áreas de estudo. Previamente à implementação dos inventários foi feita uma caracterização das duas bacias, em termos geográficos, hidroclimatológicos, de ocupação do solo, geomorfológicos e hidrogeológicos. As duas bacias desenvolvem‐se, principalmente, na unidade hidrogeológica do granito de grão médio a fino, por vezes com saprólito. O inventário hidrogeológico contemplou principalmente fontanários e nascentes, tendo incluído, respetivamente, 8 e 21 pontos de água nas bacias da Asprela e de Massarelos. As águas subterrâneas são límpidas, sem turvação ou cheiro, ácidas, com mineralizações baixas a médias, temperaturas baixas e caudais muito pequenos. Quanto aos potenciais focos de contaminação, na bacia da Asprela foram reconhecidos 61, enquanto que na bacia de Massarelos foram identificados 78. A maioria destas atividades é pontual correspondendo, nomeadamente, a estabelecimentos de ensino e estações de serviço/oficinas de automóveis. Contudo, os focos lineares apresentam uma difusão significativa nas duas bacias hidrográficas. Apesar de a vulnerabilidade intrínseca à contaminação das águas subterrâneas nestas áreas ser baixa a moderada, a localização dos potenciais focos de contaminação poderá ser responsável pelo aumento da vulnerabilidade nas duas bacias estudadas. Esta metodologia demonstrou ser extremamente importante para um melhor conhecimento dos sistemas de água subterrânea do Porto e, ainda, da hidrogeologia de áreas urbanas.

Study of vanadium doped ZnO films prepared by dc reactive magnetron sputtering at different substrate temperatures

ZnO films doped with vanadium (ZnO:V) have been prepared by dc reactive magnetron sputtering technique at different substrate temperatures (RT–500 C). The effects of the substrate temperature on ZnO:V films properties have been studied. XRD measurements show that only ZnO polycrystalline structure has been obtained, no V2O5 or VO2 crystal phase can be observed. It has been found that the film prepared at low substrate temperature has a preferred orientation along the (002) direction. As the substrate temperature is increased, the (002) peak intensity decreases. When the substrate temperature reaches the 500 C, the film shows a random orientation. SEM measurements show a clear formation of the nano-grains in the sample surface when the substrate temperature is higher than 400 C. The optical properties of the films have been studied by measuring the specular transmittance. The refractive index has been calculated by fitting the transmittance spectra using OJL model combined with harmonic oscillator.

One-step preparation of optically transparent Ni-Fe oxide film electrocatalyst for oxygen evolution reaction

Optically transparent cocatalyst film materials is very desirable for improved photoelectrochemical (PEC)oxygen evolution reaction (OER) over light harvesting photoelectrodes which require the exciting light to irradiate through the cocatalyst side, i.e., front-side illumination. In view of the reaction overpotential at electrode/electrolyte interface, the OER electrocatalysts have been extensively used as cocatalysts for PEC water oxidation on photoanode. In this work, the feasibility of a one-step fabrication of the transparent thin film catalyst for efficient electrochemical OER is investigated. The Ni-Fe bimetal oxide films, 200 nm in thickness, are used for study. Using a reactive magnetron co-sputtering technique, transparent(> 50% in wavelength range 500-2000 nm) Ni-Fe oxide films with high electrocatalytic activities were successfully prepared at room temperature. Upon optimization, the as-prepared bimetal oxide film with atomic ratio of Fe/Ni = 3:7 demonstrates the lowest overpotential for the OER in aqueous KOH solution, as low as 329 mV at current density of 2 mA cm 2, which is 135 and 108 mV lower than that of as-sputtered FeOx and NiOx thin films, respectively. It appears that this fabrication strategy is very promising to deposit optically transparent cocatalyst films on photoabsorbers for efficient PEC water splitting.

RuSe Electrocatalysts and Single Wall Carbon Nanohorns Supports for the Oxygen Reduction Reaction

Selenium modified ruthenium electrocatalysts supported on carbon black were synthesized using NaBH4 reduction of the metal precursor. Prepared Ru/C electrocatalysts showed high dispersion and very small averaged particle size. These Ru/C electrocatalysts were subsequently modified with Se following two procedures: (a) preformed Ru/carbon catalyst was mixed with SeO2 in xylene and reduced in H2 and (b) Ru metal precursor was mixed with SeO2 followed by reduction with NaBH4. The XRD patterns indicate that a pyrite-type structure was obtained at higher annealing temperatures, regardless of the Ru:Se molar ratio used in the preparation step. A pyrite-type structure also emerged in samples that were not calcined; however, in this case, the pyrite-type structure was only prominent for samples with higher Ru:Se ratios. The characterization of the RuSe/C electrocatalysts suggested that the Se in noncalcined samples was present mainly as an amorphous skin. Preliminary study of activity toward oxygen reduction reaction (ORR) using electrocatalysts with a Ru:Se ratio of 1:0.7 indicated that annealing after modification with Se had a detrimental effect on their activity. This result could be related to the increased particle size of crystalline RuSe2 in heat-treated samples. Higher activity of not annealed RuSe/C catalysts could also be a result of the structure containing amorphous Se skin on the Ru crystal. The electrode obtained using not calcined RuSe showed a very promising performance with a slightly lower activity and higher overpotential in comparison with a commercial Pt/C electrode. Single wall carbon nanohorns (SWNH) were considered for application as ORR electrocatalysts' supports. The characterization of SWNH was carried out regarding their tolerance toward strong catalyzed corrosion conditions. Tests indicated that SWNH have a three times higher electrochemical surface area (ESA) loss than carbon black or Pt commercial electrodes.