Recursos educativos aplicados à medicina dentária

Com a crescente associação dos meios tecnológicos aos métodos de ensino, tem-se vindo a verificar uma mudança significativa na forma como o aluno adquire o conhecimento. Os meios digitais tornaram-se num meio cada vez mais apetecível para os alunos e para os professores, que vêem no suporte tecnológico um precioso complemento para utilizar nas suas aulas. O aparecimento do ensino à distância e mais recentemente do e-learning, veio revolucionar a forma como se adquire o conhecimento, deixando de ser importante a hora e o local aonde nos encontramos. Com estes novos tipos de ensino, surgem também os novos tipos de recursos disponíveis. Uns dos recursos tecnológicos em destaque na actualidade são os Objectos de Aprendizagem (OA), pequenos pedaços de informação que podem ser utilizados, reutilizados ou referenciados no apoio tecnológico à aprendizagem. Analisados os conceitos e as características dos OA foi efectuado o levantamento do estado da arte e feito um estudo sobre recursos educativos utilizados na área da Medicina Dentária, sendo realizada uma análise a cada um desses recursos, observando as suas carências e os seus pontos fortes. Posteriormente partiu-se para a realização de um OA que possa servir como suporte ao ensino da Medicina Dentária, mais concretamente sobre a realização de incisões e de suturas durante cirurgias dentárias. A sua validação revelou ser possível a reutilização em diferentes contextos de ensino e aprendizagem.

As atividades de enriquecimento curricular e a pedagogia do lazer

Nas últimas décadas a sociedade tem sido palco de várias mudanças, reflexo do desenvolvimento de uma sociedade cada vez mais globalizada. Este desenvolvimento emergente da sociedade, gerou novas necessidades e impôs também novos desafios à instituição escolar. Uma das novas necessidades, à qual a escola precisou responder, foi a de ocupar por mais tempo as crianças na escola e alargar a sua oferta pedagógica, uma vez que, atualmente, a maioria dos pais trabalha. Surge assim, o conceito de escola a tempo inteiro e a implementação das atividades de enriquecimento curricular (AEC). As AEC vieram substituir as atividades de tempos livres, que se destinavam a proporcionar atividades de lazer e que possibilitavam que a criança escolhesse sobre o que fazer e como. A significativa alteração na organização e funcionamento das escolas, decorrente da implementação das AEC, veio suscitar dúvidas nos professores e comunidade educativa, que se viram confrontados com a longa permanência dos alunos na escola, a pouca disponibilidade das crianças para brincadeiras, em resultado de um horário escolar preenchido em atividades, desvalorizando-se o brincar espontâneo das crianças como forma de interação e construção de conhecimento. Reconhecendo a importância das atividades lúdicas no desenvolvimento global da criança, este estudo pretende contribuir para o desenvolvimento das AEC, num contexto lúdico, suportado pelas caraterísticas do lazer.

Comparative analysis of the ground reaction forces, during the support phase, in a group of pregnant women on their 3rd trimester of pregnancy and in a group of not pregnant women

PURPOSE: To analyze and compare the Ground Reaction Forces (GRF), during the stance phase of walking in pregnant women in the 3rd trimester of pregnancy, and non pregnant women. METHODS: 20 women, 10 pregnant and 10 non pregnant, voluntarily took part in this study. GRF were measured (1000 Hz) using a force platform (BERTEC 4060-15), an amplifier (BERTEC AM 6300) and an analogical-digital converter of 16 Bits (Biopac). RESULTS: The study showed that there were significant differences among the two groups concerning absolute values of time of the stance phase. In what concerns to the normalized values the most significant differences were verified in the maximums values of vertical force (Fz3, Fz1) and in the impulse of the antero-posterior force (Fy2), taxes of growth of the vertical force, and in the period of time for the antero-posterior force (Fy) be null. CONCLUSIONS: It is easier for the pregnant to continue forward movement (push-off phase). O smaller growth rates in what concerns to the maximum of the vertical force (Fz1) for the pregnant, can be associated with a slower speed of gait, as an adaptation strategy to maintain the balance, to compensate the alterations in the position of her center of gravity due to the load increase. The data related to the antero-posterior component of the force (Fy), shows that there is a significant difference between the pregnant woman’s left foot and right foot, which accuses a different functional behavior in each one of the feet, during the propulsion phase (TS).

O cinema do SPN/SNI – o ideal de Ferro, a realidade de chumbo

In Europe, the first half of the twentieth century was characterize by the rise of authoritarian regimes that used cinema as a propaganda tool for the prosecution and consolidation of political power. Indeed, film conveyed images, symbols, myths to an extent and strength that no other media had. In Portugal, the 1930 and 1940’s represent one of the most significant phases, either because of the introduction/strengthening of the technology of sound cinema, whether by the action of the Secretariado Nacional de Propaganda, the propaganda instrument of Estado Novo. Among the multitude of ways that this organization resorted to spread the political message of Estado Novo, cinema in particular aroused the attention of its director, António Ferro, as a preferred mean of communication with the masses. This communication seeks to examine the role played by António Ferro in the national film scene. It intends to determine the nature and direction of his cinematographic vision, i.e., his ethical and aesthetic assumptions, firstly, and secondly, its political action towards the portuguese film industry, as director of the SPN / SNI, under the tutelage of Oliveira Salazar.

Post-surgical wound infections involving Enterobacteriaceae with reduced susceptibility to ß-lactams in two Portuguese hospitals

The post-surgical period is often critical for infection acquisition. The combination of patient injury and environmental exposure through breached skin add risk to pre-existing conditions such as drug or depressed immunity. Several factors such as the period of hospital staying after surgery, base disease, age, immune system condition, hygiene policies, careless prophylactic drug administration and physical conditions of the healthcare centre may contribute to the acquisition of a nosocomial infection. A purulent wound can become complicated whenever antimicrobial therapy becomes compromised. In this pilot study, we analysed Enterobacteriaceae strains, the most significant gram-negative rods that may occur in post-surgical skin and soft tissue infections (SSTI) presenting reduced β-lactam susceptibility and those presenting extended-spectrum β-lactamases (ESBL). There is little information in our country regarding the relationship between β-lactam susceptibility, ESBL and development of resistant strains of microorganisms in SSTI. Our main results indicate Escherichia coli and Klebsiella spp. are among the most frequent enterobacteria (46% and 30% respectively) with ESBL production in 72% of Enterobacteriaceae isolates from SSTI. Moreover, coinfection occurred extensively, mainly with Pseudomonas aeruginosa and Methicillin-resistant Staphylococcus aureus (18% and 13%, respectively). These results suggest future research to explore if and how these associations are involved in the development of antibiotic resistance.

Contextualização de “learning objects” no ensino da área da saúde. O caso do ensino da higiene oral

Com o crescimento das Tecnologias de Informação e Comunicação os métodos de ensino também foram evoluindo, verificando-se assim mudanças bastante significativas na forma como se adquire o conhecimento. O aparecimento do ensino à distância aliado aos meios digitais, que estão cada vez mais disponíveis e acessíveis, tanto a alunos como a professores, são um excelente complemento à actividade lectiva. Exemplo disso é mesmo o caso do e-learning que veio revolucionar todo o processo de aquisição de conhecimento, deixando para segundo plano pormenores como o local ou a hora de aquisição do conhecimento. Entre muitos tipos de recursos disponíveis, os OA’s (Objecto de Aprendizagem) têm uma utilização cada vez mais frequente. No levantamento do estado da arte e no estudo dos recursos educativos utilizados actualmente na Medicina Dentária, foi assinalado a utilização recorrente dos OA’s, que basicamente são pequenos pedaços de informação que podem ser reutilizados ou referenciados tecnologicamente. Seguidamente, iniciou-se a realização de um OA que pudesse servir de apoio ao ensino da Medicina Dentária, focando-se concretamente na higiene oral para as crianças entre os 7 e 12 anos. Finalmente, procedeu-se à sua validação conclui-se que no futuro será possível a sua reutilização em diferentes contextos de ensino e aprendizagem na área.

Determination of pesticides in fruit and fruit juices by chromatographic methods. An overview

In order to combat a variety of pests, pesticides are widely used in fruits. Several extraction procedures (liquid extraction, single drop microextraction, microwave-assisted extraction, pressurized liquid extraction, supercritical fluid extraction, solid-phase extraction, solid-phase microextraction, matrix solid-phase dispersion, and stir bar sorptive extraction) have been reported to determine pesticide residues in fruits and fruit juices. The significant change in recent years is the introduction of the Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) methods in these matrices analysis. A combination of techniques reported the use of new extraction methods and chromatography to provide better quantitative recoveries at low levels. The use of mass spectrometric detectors in combination with liquid and gas chromatography has played a vital role to solve many problems related to food safety. The main attention in this review is on the achievements that have been possible because of the progress in extraction methods and the latest advances and novelties in mass spectrometry, and how these progresses have influenced the best control of food, allowing for an increase in the food safety and quality standards.

Influencing factors on bread-derived exposure to ochratoxin A: type, origin and composition

The nearly ubiquitous consumption of cereals all over the world renders them an important position in international nutrition, but concurrently allocates exposure to possible contained contaminants. Mycotoxins are natural food contaminants, difficult to predict, evade, and reduce, so it is important to establish the real contribution of each contaminated food product, with the aim to evaluate mycotoxin exposure. This was the key objective of this survey and analysis for ochratoxin A content on 274 samples of commercialized bread in the Portuguese market, during the winter 2007. Different bread products were analyzed through an HPLC-FD method, including traditional types, novel segments, and different grain based bread products. A wide-ranging low level contamination was observed in all regions and types of bread products analyzed, especially in the Porto and Coimbra regions, and in the maize and whole-grain or fiber-enriched bread. Nevertheless, the exposure through contaminated wheat bread continues to be the most significant, given its high consumption and dominance in relation to the other types of bread.

Hagiografia no feminino. Um texto inédito de Frei Aleixo de Meneses

Para o caso dos Eremitas de Santo Agostinho, o texto seiscentista de Frei Aleixo de Meneses acerca de Beatriz Vaz de Oliveira, constitui o mais significativo exemplo da literatura hagiográfica feminina daquela ordem.

A framework for realistic real-time walkthroughs in a VR distributed environment

Virtual and augmented reality (VR/AR) are increasingly being used in various business scenarios and are important driving forces in technology development. However the usage of these technologies in the home environment is restricted due to several factors including lack of low-cost (from the client point of view) highperformance solutions. In this paper we present a general client/server rendering architecture based on Real-Time concepts, including support for a wide range of client platforms and applications. The idea of focusing on the real-time behaviour of all components involved in distributed IP-based VR scenarios is new and has not been addressed before, except for simple sub-solutions. This is considered as “the most significant problem with the IP environment” [1]. Thus, the most important contribution of this research will be the holistic approach, in which networking, end-systems and rendering aspects are integrated into a cost-effective infrastructure for building distributed real-time VR applications on IP-based networks.

Data gathering approach in dense sensor networks

Sensor/actuator networks promised to extend automated monitoring and control into industrial processes. Avionic system is one of the prominent technologies that can highly gain from dense sensor/actuator deployments. An aircraft with smart sensing skin would fulfill the vision of affordability and environmental friendliness properties by reducing the fuel consumption. Achieving these properties is possible by providing an approximate representation of the air flow across the body of the aircraft and suppressing the detected aerodynamic drags. To the best of our knowledge, getting an accurate representation of the physical entity is one of the most significant challenges that still exists with dense sensor/actuator network. This paper offers an efficient way to acquire sensor readings from very large sensor/actuator network that are located in a small area (dense network). It presents LIA algorithm, a Linear Interpolation Algorithm that provides two important contributions. First, it demonstrates the effectiveness of employing a transformation matrix to mimic the environmental behavior. Second, it renders a smart solution for updating the previously defined matrix through a procedure called learning phase. Simulation results reveal that the average relative error in LIA algorithm can be reduced by as much as 60% by exploiting transformation matrix.

Diagnóstico ambiental de duas empresas

Mestrado em Engenharia Química - Ramo Tecnologias de Protecção Ambiental

Incorporating sustainability into a chemical company’s modus operandi

The intent of this dissertation is to review relevant existing management systems and chemical industry initiatives to identify synergies, overlaps and gaps with Sustainability best practices, to map the barriers to the incorporation of Sustainability and formulate recommendations to facilitate execution of Sustainability practices within existing management systems. A chemical industry Sustainability survey was conducted through APEQ, the Portuguese association of chemical companies, which constitutes the first baseline on the topic for this national industry association. The commonly used international standards and the Responsible Care® (RC) initiative were cross-referenced against the United Nations Global Compact Assessment Tool. Guidance on how to incorporate Sustainability into a company‘s modus operandi was collapsed into Sustainability Playbooks. The survey revealed that 73% of the APEQ member companies that participated in the survey have a Sustainability Plan. Both large and small/medium APEQ member companies see the market not willing to pay extra for ‗greener‘ products as one of the main barriers. APEQ large enterprise see complexity of implementation and low return on investment as the other most significant barriers while small/medium enterprise respond that the difficulty to predict customer sustainability needs is the other most significant barrier. Amongst many other insights from this survey reported to APEQ, Life Cycle Assessment practices were found to have a low level of implementation and were also considered of low importance, thus identifying a very important opportunity in Sustainability practices to be addressed by APEQ. Two hundred and seventy three assessment points from United Nations Global Compact Assessment Tool plus five additional items were cross-referenced with international standard requirements. With the authorization of the intellectual property owners, the United Nations Global Compact Assessment Tool was modified to introduce actionable recommendations for each gap identified by management standard. This tool was automated to output specific recommendations for 63 possible combinations after simply selecting from a list of commonly used management standards and the RC initiative. Finally this modified tool was introduced into Playbooks for Incorporation of Sustainability at two levels: a ―Get Started Playbook‖ for beginners or small/medium size enterprise and an ―Advanced Playbook‖ as a second advancement stage or for large enterprise.

An uncertainty and sensitivity analysis applied to the prioritisation of pharmaceuticals as surface water contaminants from wastewater treatment plant direct emissions

In this study, the concentration probability distributions of 82 pharmaceutical compounds detected in the effluents of 179 European wastewater treatment plants were computed and inserted into a multimedia fate model. The comparative ecotoxicological impact of the direct emission of these compounds from wastewater treatment plants on freshwater ecosystems, based on a potentially affected fraction (PAF) of species approach, was assessed to rank compounds based on priority. As many pharmaceuticals are acids or bases, the multimedia fate model accounts for regressions to estimate pH-dependent fate parameters. An uncertainty analysis was performed by means of Monte Carlo analysis, which included the uncertainty of fate and ecotoxicity model input variables, as well as the spatial variability of landscape characteristics on the European continental scale. Several pharmaceutical compounds were identified as being of greatest concern, including 7 analgesics/anti-inflammatories, 3 β-blockers, 3 psychiatric drugs, and 1 each of 6 other therapeutic classes. The fate and impact modelling relied extensively on estimated data, given that most of these compounds have little or no experimental fate or ecotoxicity data available, as well as a limited reported occurrence in effluents. The contribution of estimated model input variables to the variance of freshwater ecotoxicity impact, as well as the lack of experimental abiotic degradation data for most compounds, helped in establishing priorities for further testing. Generally, the effluent concentration and the ecotoxicity effect factor were the model input variables with the most significant effect on the uncertainty of output results.

Adapted Control Methods for Cerebral Palsy Users of an Intelligent Wheelchair

The development of an intelligent wheelchair (IW) platform that may be easily adapted to any commercial electric powered wheelchair and aid any person with special mobility needs is the main objective of this project. To be able to achieve this main objective, three distinct control methods were implemented in the IW: manual, shared and automatic. Several algorithms were developed for each of these control methods. This paper presents three of the most significant of those algorithms with emphasis on the shared control method. Experiments were performed by users suffering from cerebral palsy, using a realistic simulator, in order to validate the approach. The experiments revealed the importance of using shared (aided) controls for users with severe disabilities. The patients still felt having complete control over the wheelchair movement when using a shared control at a 50% level and thus this control type was very well accepted. Thus it may be used in intelligent wheelchairs since it is able to correct the direction in case of involuntary movements of the user but still gives him a sense of complete control over the IW movement.