La social stock exchange au Portugal: un nouvel allié de l'économie sociale

Résumé Cet article vise à contribuer à la connaissance de la Bolsa de Valores Sociais (BVS) — Social Stock Exchange — récemment créé au Portugal, dont le but primatial était de permettre la prise de moyens de financement des entités de l'Économie Sociale engagées dans des projets d'éducation et d'entreprenariat. Il se penchera sur la qualification juridique des divers types d'entités cotées dans la BVS, sur le concept d'investisseur social et sur la protection dont il jouira, vis-à-vis des exigences de transparence et de gouvernance qui incombent à ces entités. Le thème proposé sera examiné en soulignant les virtualités et le potentiel de la BVS, faisant référence à l'un ou à l'autre sujet qui viennent à effet, avec un accent particulier sur l'avantage d'élaborer un code de gouvernance corporative pour les entités de l'Économie Sociale. Abstract This article aims to contribute to the knowledge of the Bolsa de Valores Sociais (BVS) — Social Stock Exchange — recently created in Portugal, whose primatial purpose was to allow the taking of means of financing the Social Economy entities, engaged in projects in education and entrepreneurship. It will reflect on the legal classification of the various types of entities rated in the BVS, on the concept of social investor and on the protection he will enjoy, leading to the consequent demands for transparency and governance that falls upon those entities. The proposed theme will be discussed highlighting the virtues and potential of BVS, playing in one or two topics that comes to purpose, with particular emphasis on the relevance of drawing up a code of corporate governance for entities of the Social Economy. Resumen Este artículo tiene como objetivo contribuir al conocimiento de la Bolsa de Valores Sociales (BVS), recientemente creada en Portugal, cuya finalidad principal es que las entidades de la economía social dedicadas a proyectos en las áreas de educación y de iniciativa empresarial puedan obtener medios financieros. Se abordará la calificación jurídica de los diversos tipos de entidades que cotizan en la BVS, así como el concepto de inversor social y la protección de que éste goza, con las consiguientes exigencias en materia de transparencia y de gobierno que recaen sobre esas entidades. Se analizará la temática propuesta destacando las virtudes y potencialidades de la BVS, sin omitir algún otro tópico adyacente que resulte relevante, en especial la conveniencia de que sea elaborado un código de gobernanza corporativa para las entidades de la economía social.

Le rôle de l'intrigue du sérail dans les lettres persanes de Montesquieu

Versão integral da revista no link do editor

Electroanalysis of urinary L-dopa using tyrosinase immobilized on gold nanoelectrode ensembles

The performance of an amperometric biosensor constructed by associating tyrosinase (Tyr) enzyme with the advantages of a 3D gold nanoelectrode ensemble (GNEE) is evaluated in a flow-injection analysis (FIA) system for the analysis of l-dopa. GNEEs were fabricated by electroless deposition of the metal within the pores of polycarbonate track-etched membranes. A simple solvent etching procedure based on the solubility of polycarbonate membranes is adopted for the fabrication of the 3D GNEE. Afterward, enzyme was immobilized onto preformed self-assembled monolayers of cysteamine on the 3D GNEEs (GNEE-Tyr) via cross-linking with glutaraldehyde. The experimental conditions of the FIA system, such as the detection potential (−0.200 V vs. Ag/AgCl) and flow rates (1.0 mL min−1) were optimized. Analytical responses for l-dopa were obtained in a wide concentration range between 1 × 10−8 mol L−1 and 1 × 10−2 mol L−1. The limit of quantification was found to be 1 × 10−8 mol L−1 with a resultant % RSD of 7.23% (n = 5). The limit of detection was found to be 1 × 10−9 mol L−1 (S/N = 3). The common interfering compounds, namely glucose (10 mmol L−1), ascorbic acid (10 mmol L−1), and urea (10 mmol L−1), were studied. The recovery of l-dopa (1 × 10−7 mol L−1) from spiked urine samples was found to be 96%. Therefore, the developed method is adequate to be applied in the clinical analysis.

Fin de partie: l'infini recommencement de rien

Dans Fin de partie, Beckett se révèle de nouveau un maître du théâtre de l’âme, mais d’une façon pas du tout conventionnelle. On doit classer cette pièce dans l’antithéâtre parce qu’elle manque d’intrigue, il n’y a que de situations cycliques toujours répétées, le temps ne veut pas passer, c’est plutôt un moment éternel, les personnages manquent de consistance et d’individualité : ils sont davantage des incarnations d’attitudes humaines, et ils parlent un langage décousu, un bourdonnement dépourvu de sens. Bien que tous ces aspects contribuent à l’ambiguïté de la pièce, rien n’y est laissé au hasard : tout sert à communiquer l’incommunicable. La scène se passe dans un lieu clos, avec une lumière crépusculaire qui suggère la fin du jour. Les personnages et les objets se trouvent dans des poubelles (Nagg et Nell) ou couverts par des draps : peu à peu, les objets et les personnages se dévoilent d’une façon fragmentée. C’est Clov qui nous dit qu’il s’agit de la fin de quelque chose, mais déjà le décor, la lumière, la déchéance physique des personnages et les dialogues à peine esquissés suggèrent un stage final qui n’en finit plus, qui devient un moment éternel, car la mort, elle non plus, ne se présente pas comme une solution pour le problème de notre existence absurde. Et nous voilà de nouveau face à face avec l’absurdité de la condition humaine, où l’homme se sent privé de toute certitude et incapable de découvrir un sens à son existence. Le tragique de la condition humaine, et le désir de lui mettre fin est le fil conducteur de Fin de partie. Les personnages montrent tout au long de la pièce que la condition humaine est intolérable et qu’ils sont écrasés par la routine et l’ennui. Ils se sentent perdus et abandonnés par un dieu quiconque, un monstre qui a créé la nature humaine. La vie est une pile de moments infernaux ; tout le monde est dans l’attente de quelqu’un ou d’un événement qui puisse changer son cours. Mais rien ne change, les personnages sont trop passifs – Clov se prépare pour son voyage, cependant, au lieu de partir, il reste là, immobile, jusqu’à la fin. Mais c’est juste pour ce danger que Beckett veut nous alerter : si nous ne faisons pas usage de notre liberté en nous recréant par une succession de choix, nous serons damnés, c’est-à-dire, condamnés à vivre dans le désespoir, le néant, l’absurde – la vie sera toujours un infini recommencement de rien.

Simultaneous distillation–extraction of high-value volatile compounds from Cistus ladanifer L.

The present paper describes a procedure to isolate volatiles from rock-rose (Cistus ladanifer L.) using simultaneous distillation–extraction (SDE). High-value volatile compounds (HVVC) were selected and the influence of the extraction conditions investigated. The effect of the solvent nature and extraction time on SDE efficiency was studied. The best performance was achieved with pentane in 1 h operation. The extraction efficiencies ranged from 65% to 85% and the repeatability varied between 4% and 6% (as a CV%). The C. ladanifer SDE extracts were analysed by headspace solid phase microextraction (HS-SPME) followed by gas chromatography with flame ionization detection (GC-FID). The HS-SPME sampling conditions such as fiber coating, temperature, ionic strength and exposure time were optimized. The best results were achieved with an 85 µm polyacrylate fiber for a 60 min headspace extraction at 40ºC with 20% (w/v) of NaCl. For optimized conditions the recovery was in average higher than 90% for all compounds and the intermediate precision ranged from 4 to 9% (as CV %). The volatiles α-pinene (22.2 mg g−1 of extract), 2,2,6-trimethylcyclohexanone (6.1 mg g−1 of extract), borneol (3.0 mg g−1 of extract) and bornyl acetate (3.9 mg g−1 of extract) were identified in the SDE extracts obtained from the fresh plant material.

Uncertainty analysis based on sensitivity applied to angle-ply composite structures

This article describes a finite element-based formulation for the statistical analysis of the response of stochastic structural composite systems whose material properties are described by random fields. A first-order technique is used to obtain the second-order statistics for the structural response considering means and variances of the displacement and stress fields of plate or shell composite structures. Propagation of uncertainties depends on sensitivities taken as measurement of variation effects. The adjoint variable method is used to obtain the sensitivity matrix. This method is appropriated for composite structures due to the large number of random input parameters. Dominant effects on the stochastic characteristics are studied analyzing the influence of different random parameters. In particular, a study of the anisotropy influence on uncertainties propagation of angle-ply composites is carried out based on the proposed approach.

An approach for reliability-based robust design optimisation of angle-ply composites

Variations of manufacturing process parameters and environmental aspects may affect the quality and performance of composite materials, which consequently affects their structural behaviour. Reliability-based design optimisation (RBDO) and robust design optimisation (RDO) searches for safe structural systems with minimal variability of response when subjected to uncertainties in material design parameters. An approach that simultaneously considers reliability and robustness is proposed in this paper. Depending on a given reliability index imposed on composite structures, a trade-off is established between the performance targets and robustness. Robustness is expressed in terms of the coefficient of variation of the constrained structural response weighted by its nominal value. The Pareto normed front is built and the nearest point to the origin is estimated as the best solution of the bi-objective optimisation problem.

Experimental and numerical evaluation of composite repairs on wood beams damaged by cross-graining

An experimental and Finite Element study was performed on the bending behaviour of wood beams of the Pinus Pinaster species repaired with adhesively-bonded carbon–epoxy patches, after sustaining damage by cross-grain failure. This damage is characterized by crack growth at a small angle to the beams longitudinal axis, due to misalignment between the wood fibres and the beam axis. Cross-grain failure can occur in large-scale in a wood member when trees that have grown spirally or with a pronounced taper are cut for lumber. Three patch lengths were tested. The simulations include the possibility of cohesive fracture of the adhesive layer, failure within the wood beam in two propagation planes and patch interlaminar failure, by the use of cohesive zone modelling. The respective cohesive properties were estimated either by an inverse method or from the literature. The comparison with the tests allowed the validation of the proposed methodology, opening a good perspective for the reduction of costs in the design stages of these repairs due to extensive experimentation.

Taper angle optimization of scarf repairs in carbon-epoxy laminates

The increasing use of Carbon-Fibre Reinforced Plastic (CFRP) laminates in high responsibility applications introduces an issue regarding their handling after damage. The availability of efficient repair methods is essential to restore the strength of the structure. The availability of accurate predictive tools for the repairs behaviour is also essential for the reduction of costs and time associated to extensive tests. This work reports on a numerical study of the tensile behaviour of three-dimensional (3D) adhesively-bonded scarf repairs in CFRP structures, using a ductile adhesive. The Finite Element (FE) analysis was performed in ABAQUS® and Cohesive Zone Models (CZM’s) was used for the simulation of damage in the adhesive layer. A parametric study was performed on two geometric parameters. The use of overlaminating plies covering the repaired region at the outer or both repair surfaces was also tested as an attempt to increase the repairs efficiency. The results allowed the proposal of design principles for repairing CFRP structures.

Effect of peel and seed removal on the nutritional value and antioxidant activity of tomato (Lycopersicon esculentum L.) fruits

The effect of peel and seed removal, two commonly practiced procedures either at home or by the processing industry, on the physicochemical properties, bioactive compounds contents and antioxidant capacity of tomato fruits of four typical Portuguese cultivars (cereja, chucha, rama and redondo) were appraised. Both procedures caused significant nutritional and antioxidant activity losses in fruits of every cultivar. In general, peeling was more detrimental, since it caused a higher decrease in lycopene, bcarotene, ascorbic acid and phenolics contents (averages of 71%, 50%, 14%, and 32%, respectively) and significantly lowered the antioxidant capacity of the fruits (8% and 10%, using DPPH. and b-carotene linoleate model assays, correspondingly). Although seeds removal favored the increase of both color and sweetness, some bioactive compounds (11% of carotenoids and 24% of phenolics) as well as antioxidant capacity (5%) were loss. The studied cultivars were differently influenced by these procedures. The fruits most affected by peeling were those from redondo cultivar (-66% lycopene, -44% b-carotene, -26% ascorbic acid and -38% phenolics). Seeds removal, in turn, was more injurious for cereja tomatoes (-10% lycopene, -38% b-carotene, -25% ascorbic acid and -63% phenolics). Comparatively with the remaining ones, the rama fruits were less affected by the trimming procedures.