Eastwards / westwards: which direction for gender studies in the 21st century?

Eastwards / Westwards: Which Direction for Gender Studies in the XXIst Century? is a collection of essays which focus on themes and methods that characterize current research into gender in Asian countries in general. In this collection, ideas derived from Gender Studies elsewhere in the world have been subjected to scrutiny for their utility in helping to describe and understand regional phenomena. But the concepts of Local and Global – with their discoursive productions – have not functioned as a binary opposition: localism and globalism are mutually constitutive and researchers have interrogated those spaces of interaction between the ‘self’ and the ‘other’, bearing in mind their own embeddedness in social and cultural structures and their own historical memory. Contributors to this collection provided a critical transnational perspective on some of the complex effects of the dynamics of cultural globalization, by exploring the relation between gender and development, language, historiography, education and culture. We have also given attention to the ideological and rhetorical processes through which gender identity is constructed, by comparing textual grids and patterns of expectation. Likewise, we have discussed the role of ethnography, anthropology, historiography, sociology, fiction, popular culture and colonial and post-colonial sources in (re)inventing old/new male/female identities, their conversion into concepts and circulation through time and space. This multicultural and trans-disciplinary selection of essays is totally written in English, fully edited and revised, therefore, it has a good potential for an immediate international circulation. This project may trace new paths and issues for discussion on what concerns the life, practices and narratives by and about women in Asia, as well as elsewhere in the present day global experience. Academic readership: Researchers, scholars, educators, graduate and post-graduate students, doctoral students and general non-fiction readers, with a special interest in Gender Studies, Asia, Colonial and Post-Colonial Literature, Anthropology, Cultural Studies, History, Historiography, Politics, Race, Feminism, Language, Linguistics, Power, Political and Feminist Agendas, Popular Culture, Education, Women’s Writing, Religion, Multiculturalism, Globalisation, Migration. Chapter summary: 1. “Social Gender Stereotypes and their Implication in Hindi”, Anjali Pande, Jawaharlal Nehru University, New Delhi, India. This essay looks at the subtle ways in which gender identities are constructed and reinforced in India through social norms of language use. Language itself becomes a medium for perpetuating gender stereotypes, forcing its speakers to confirm to socially defined gender roles. Using examples from a classroom discussion about a film, this essay will highlight the underlying rigid male-female stereotypes in Indian society with their more obvious expressions in language. For the urban woman in India globalisation meant increased economic equality and exposure to changed lifestyles. On an individual level it also meant redefining gender relations and changing the hierarchy in man-­woman relationships. With the economic independence there is a heightened sense of liberation in all spheres of social life, a confidence to fuzz the rigid boundaries of gender roles. With the new films and media celebrating this liberated woman, who is ready to assert her sexual needs, who is ready to explode those long held notions of morality, one would expect that the changes are not just superficial. But as it soon became obvious in the course of a classroom discussion about relationships and stereotypes related to age, the surface changes can not become part of the common vocabulary, for the obvious reason that there is still a vast gap between the screen image of this new woman and the ground reality. Social considerations define the limits of this assertiveness of women, whereas men are happy to be liberal within the larger frame of social sanctions. The educated urban woman in India speaks in favour of change and the educated urban male supports her, but one just needs to scratch the surface to see the time tested formulae of gender roles firmly in place. The way the urban woman happily balances this emerging promise of independence with her gendered social identity, makes it necessary to rethink some aspects of looking at gender in a gradually changing, traditional society like India. 2. “The Linguistic Dimension of Gender Equality”, Alissa Tolstokorova, Kiev Centre for Gender Information and Education, Ukraine. The subject-matter of this essay is gender justice in language which, as I argue, may be achieved through the development of a gender-related approach to linguistic human rights. The last decades of the 20th century, globally marked by a “gender shift” in attitudes to language policy, gave impetus to the social movement for promoting linguistic gender equality. It was initiated in Western Europe and nowadays is moving eastwards, as ideas of gender democracy progress into developing countries. But, while in western societies gender discrimination through language, or linguistic sexism, was an issue of concern for over three decades, in developing countries efforts to promote gender justice in language are only in their infancy. My argument is that to promote gender justice in language internationally it is necessary to acknowledge the rights of women and men to equal representation of their gender in language and speech and, therefore, raise a question of linguistic rights of the sexes. My understanding is that the adoption of the Universal Declaration of Linguistic Rights in 1996 provided this opportunity to address the problem of gender justice in language as a human rights issue, specifically as a gender dimension of linguistic human rights. 3. “The Rebirth of an Old Language: Issues of Gender Equality in Kazakhstan”, Maria Helena Guimarães, Polytechnic Institute of Porto, Portugal. The existing language situation in Kazakhstan, while peaceful, is not without some tension. We propose to analyze here some questions we consider relevant in the frame of cultural globalization and gender equality, such as: free from Russian imperialism, could Kazakhstan become an easy prey of Turkey’s “imperialist dream”? Could these traditionally Muslim people be soon facing the end of religious tolerance and gender equality, becoming this new old language an easy instrument for the infiltration in the country of fundamentalism (it has already crossed the boarders of Uzbekistan), leading to a gradual deterioration of its rich multicultural relations? The present structure of the language is still very fragile: there are three main dialects and many academics defend the re-introduction of the Latin alphabet, thus enlarging the possibility of cultural “contamination” by making the transmission of fundamentalist ideas still easier through neighbour countries like Azerbaijan, Uzbekistan and Turkmenistan (their languages belong to the same sub-group of Common Turkic), where the Latin alphabet is already in use, and where the ground for such ideas shown itself very fruitful. 4. “Construction of Womanhood in the Bengali Language of Bangladesh”, Raasheed Mahmood; University of New South Wales, Sydney. The present essay attempts to explore the role of gender-based language differences and of certain markers that reveal the status accorded to women in Bangladesh. Discrimination against women, in its various forms, is endemic in communities and countries around the world, cutting across class, race, age, and religious and national boundaries. One cannot understand the problems of gender discrimination solely by referring to the relationship of power or authority between men and women. Rather one needs to consider the problem by relating it to the specific social formation in which the image of masculinity and femininity is constructed and reconstructed. Following such line of reasoning this essay will examine the nature of gender bias in the Bengali language of Bangladesh, holding the conviction that as a product of social reality language reflects the socio-cultural behaviour of the community who speaks it. This essay will also attempt to shed some light on the processes through which gender based language differences produce actual consequences for women, who become exposed to low self-esteem, depression and systematic exclusion from public discourse. 5. “Marriage in China as an expression of a changing society”, Elisabetta Rosado David, University of Porto, Portugal, and Università Ca’Foscari, Venezia, Italy. In 29 April 2001, the new Marriage Law was promulgated in China. The first law on marriage was proclaimed in 1950 with the objective of freeing women from the feudal matrimonial system. With the second law, in 1981, values and conditions that had been distorted by the Cultural Revolution were recovered. Twenty years later, a new reform was started, intending to update marriage in the view of the social and cultural changes that occurred with Deng Xiaoping’s “open policy”. But the legal reform is only the starting point for this case-study. The rituals that are followed in the wedding ceremony are often hard to understand and very difficult to standardize, especially because China is a vast country, densely populated and characterized by several ethnic minorities. Two key words emerge from this issue: syncretism and continuity. On this basis, we can understand tradition in a better way, and analyse whether or not marriage, as every social manifestation, has evolved in harmony with Chinese culture. 6. “The Other Woman in the Portuguese Colonial Empire: The Case of Portuguese India”, Maria de Deus Manso, University of Évora, Portugal. This essay researches the social, cultural and symbolic history of local women in the Portuguese Indian colonial enclaves. The normative Portuguese overseas history has not paid any attention to the “indigenous” female populations in colonial Portuguese territories, albeit the large social importance of these social segments largely used in matrimonial and even catholic missionary strategies. The first attempt to open fresh windows in the history of this new field was the publication of Charles Boxer’s referential study about Women in lberian Overseas Expansion, edited in Portugal only after the Revolution of 1975. After this research we can only quote some other fragmentary efforts. In fact, research about the social, cultural, religious, political and symbolic situation of women in the Portuguese colonial territories, from the XVI to the XX century, is still a minor historiographic field. In this essay we discuss this problem and we study colonial representations of women in the Portuguese Indian enclaves, mainly in the territory of Goa, using case studies methodologies. 7. “Heading East this Time: Critical Readings on Gender in Southeast Asia”, Clara Sarmento, Polytechnic Institute of Porto, Portugal. This essay intends to discuss some critical readings of fictional and theoretical texts on gender condition in Southeast Asian countries. Nowadays, many texts about women in Southeast Asia apply concepts of power in unusual areas. Traditional forms of gender hegemony have been replaced by other powerful, if somewhat more covert, forms. We will discuss some universal values concerning conventional female roles as well as the strategies used to recognize women in political fields traditionally characterized by male dominance. Female empowerment will mean different things at different times in history, as a result of culture, local geography and individual circumstances. Empowerment needs to be perceived as an individual attitude, but it also has to be facilitated at the macro­level by society and the State. Gender is very much at the heart of all these dynamics, strongly related to specificities of historical, cultural, ethnic and class situatedness, requiring an interdisciplinary transnational approach.

European information users: topics from a comparative analysis within the European Union

Purpose – The aim of this article is to present some results from research undertaken into the information behaviour of European Documentation Centre (EDC) users. It will reflect on the practices of a group of 234 users of 55 EDCs covering 21 Member States of the European Union (EU), used to access European information. Design/methodology/approach – In order to collect the data presented here, five questionnaires were sent to users in all the EDCs in Finland, Ireland, Hungary and Portugal. In the remaining EU countries, five questionnaires were sent to two EDCs chosen at random. The questionnaires were sent by post, following telephone contact with the EDC managers. Findings – Factors determining access to information on the European Union and the frequency of this access are identified. The information providers most commonly used to access European information and the information sources considered the most reliable by respondents will also be analysed. Another area of analysis concerns the factors cited by respondents as facilitating access to information on Europe or, conversely, making it more difficult to access. Parallel to this, the aspects of accessing information on EU that are valued most by users will also be assessed. Research limitations/implications – Questionnaires had to be used, as the intention was to cover a very extensive geographical area. However, in opting for closed questions, it is acknowledged that standard responses have been obtained with no scope for capturing the individual circumstances of each respondent, thus making a qualitative approach difficult. Practical implications – The results provide an overall picture of certain aspects of the information behaviour of EDC users. They may serve as a starting point for planning training sessions designed to develop the skills required to search, access, evaluate and apply European information within an academic context. From a broader perspective, they also constitute factors which the European Commission should take into consideration when formulating its information and communication policy. Originality/value – This is the first piece of academic research into the EDCs and their users, which aimed to cover all Members State of the EU.

Adaptive learning in agents behaviour: a framework for electricity markets simulation

Electricity markets are complex environments with very particular characteristics. A critical issue regarding these specific characteristics concerns the constant changes they are subject to. This is a result of the electricity markets’ restructuring, which was performed so that the competitiveness could be increased, but it also had exponential implications in the increase of the complexity and unpredictability in those markets scope. The constant growth in markets unpredictability resulted in an amplified need for market intervenient entities in foreseeing market behaviour. The need for understanding the market mechanisms and how the involved players’ interaction affects the outcomes of the markets, contributed to the growth of usage of simulation tools. Multi-agent based software is particularly well fitted to analyze dynamic and adaptive systems with complex interactions among its constituents, such as electricity markets. This dissertation presents ALBidS – Adaptive Learning strategic Bidding System, a multiagent system created to provide decision support to market negotiating players. This system is integrated with the MASCEM electricity market simulator, so that its advantage in supporting a market player can be tested using cases based on real markets’ data. ALBidS considers several different methodologies based on very distinct approaches, to provide alternative suggestions of which are the best actions for the supported player to perform. The approach chosen as the players’ actual action is selected by the employment of reinforcement learning algorithms, which for each different situation, simulation circumstances and context, decides which proposed action is the one with higher possibility of achieving the most success. Some of the considered approaches are supported by a mechanism that creates profiles of competitor players. These profiles are built accordingly to their observed past actions and reactions when faced with specific situations, such as success and failure. The system’s context awareness and simulation circumstances analysis, both in terms of results performance and execution time adaptation, are complementary mechanisms, which endow ALBidS with further adaptation and learning capabilities.

Oxidative behaviour of apomorphine and its metabolites

The metabolism of apomorphine is quite complex due to interactions with proteins and other tissue components that affect its pharmacokinetic profile. The electrochemical oxidation mechanism of apomorphine and of some synthesised apomorphine derivatives was studied. It was found to be related to the reaction of o-diphenol and tertiary amine groups and strongly dependent on pH.

Sorption behaviour of bifenthrin on cork

Biphentrin, a known pyrethroid, was studied, aiming its removal from aqueous solutions by granulated cork sorption. Batch experiments, either for equilibrium or for kinetics, with two granulated cork sizes were performed and results were compared with those obtained with of activated carbon sorption. Langmuir and Freundlich adsorption isotherms were obtained both showing high linear correlations. Bifenthrin desorption was evaluated for cork and results varied with the granule size of sorbent. The results obtained in this work indicate that cork wastes may be used as a cheap natural sorbent for bifenthrin or similar compounds removal from wastewaters.

Study of the voltammetric behaviour of metam and its application to an amperometric flow system

The electrochemical behaviour of the pesticide metam (MT) at a glassy carbon working electrode (GCE) and at a hanging mercury drop electrode (HMDE) was investigated. Different voltammetric techniques, including cyclic voltammetry (CV) and square wave voltammetry (SWV), were used. An anodic peak (independent of pH) at +1.46 V vs AgCl/Ag was observed in MTaqueous solution using the GCE. SWV calibration curves were plotted under optimized conditions (pH 2.5 and frequency 50 Hz), which showed a linear response for 17–29 mg L−1. Electrochemical reduction was also explored, using the HMDE. A well defined cathodic peak was recorded at −0.72 V vs AgCl/ Ag, dependent on pH. After optimizing the operating conditions (pH 10.1, frequency 150 Hz, potential deposition −0.20 V for 10 s), calibration curves was measured in the concentration range 2.5×10−1 to 1.0 mg L−1 using SWV. The electrochemical behaviour of this compound facilitated the development of a flow injection analysis (FIA) system with amperometric detection for the quantification of MT in commercial formulations and spiked water samples. An assessment of the optimal FIA conditions indicated that the best analytical results were obtained at a potential of +1.30 V, an injection volume of 207 μL and an overall flow rate of 2.4 ml min−1. Real samples were analysed via calibration curves over the concentration range 1.3×10−2 to 1.3 mg L−1. Recoveries from the real samples (spiked waters and commercial formulations) were between 97.4 and 105.5%. The precision of the proposed method was evaluated by assessing the relative standard deviation (RSD %) of ten consecutive determinations of one sample (1.0 mg L−1), and the value obtained was 1.5%.

Tensile behaviour of a structural adhesive at high temperatures by the extended finite element method

Component joining is typically performed by welding, fastening, or adhesive-bonding. For bonded aerospace applications, adhesives must withstand high-temperatures (200°C or above, depending on the application), which implies their mechanical characterization under identical conditions. The extended finite element method (XFEM) is an enhancement of the finite element method (FEM) that can be used for the strength prediction of bonded structures. This work proposes and validates damage laws for a thin layer of an epoxy adhesive at room temperature (RT), 100, 150, and 200°C using the XFEM. The fracture toughness (G Ic ) and maximum load ( ); in pure tensile loading were defined by testing double-cantilever beam (DCB) and bulk tensile specimens, respectively, which permitted building the damage laws for each temperature. The bulk test results revealed that decreased gradually with the temperature. On the other hand, the value of G Ic of the adhesive, extracted from the DCB data, was shown to be relatively insensitive to temperature up to the glass transition temperature (T g ), while above T g (at 200°C) a great reduction took place. The output of the DCB numerical simulations for the various temperatures showed a good agreement with the experimental results, which validated the obtained data for strength prediction of bonded joints in tension. By the obtained results, the XFEM proved to be an alternative for the accurate strength prediction of bonded structures.

Characterizing the timing behaviour of power-line communication by means of simulation

Although power-line communication (PLC) is not a new technology, its use to support communication with timing requirements is still the focus of ongoing research. Recently, a new infrastructure was presented, intended for communication using power lines from a central location to geographically dispersed nodes using inexpensive devices. This new infrastructure uses a two-level hierarchical power-line system, together with an IP-based network. Within this infrastructure, in order to provide end-toend communication through the two levels of the powerline system, it is necessary to fully understand the behaviour of the underlying network layers. The masterslave behaviour of the PLC MAC, together with the inherent dynamic topology of power-line networks are important issues that must be fully characterised. Therefore, in this paper we present a simulation model which is being used to study and characterise the behaviour of power-line communication.

Dynamical behaviour of multi-particle large-scale systems

Collective behaviours can be observed in both natural and man-made systems composed of a large number of elemental subsystems. Typically, each elemental subsystem has its own dynamics but, whenever interaction between individuals occurs, the individual behaviours tend to be relaxed, and collective behaviours emerge. In this paper, the collective behaviour of a large-scale system composed of several coupled elemental particles is analysed. The dynamics of the particles are governed by the same type of equations but having different parameter values and initial conditions. Coupling between particles is based on statistical feedback, which means that each particle is affected by the average behaviour of its neighbours. It is shown that the global system may unveil several types of collective behaviours, corresponding to partial synchronisation, characterised by the existence of several clusters of synchronised subsystems, and global synchronisation between particles, where all the elemental particles synchronise completely.

Real-time communications over cluster-tree sensor networks with mobile sink behaviour

Modelling the fundamental performance limits of wireless sensor networks (WSNs) is of paramount importance to understand the behaviour of WSN under worst case conditions and to make the appropriate design choices. In that direction, this paper contributes with a methodology for modelling cluster tree WSNs with a mobile sink. We propose closed form recurrent expressions for computing the worst case end to end delays, buffering and bandwidth requirements across any source-destination path in the cluster tree assuming error free channel. We show how to apply our theoretical results to the specific case of IEEE 802.15.4/ZigBee WSNs. Finally, we demonstrate the validity and analyze the accuracy of our methodology through a comprehensive experimental study, therefore validating the theoretical results through experimentation.

Using a cohesive damage model to predict the tensile behaviour of CFRP single-strap repairs

This work addresses both experimental and numerical analyses regarding the tensile behaviour of CFRP single-strap repairs. Two fundamental geometrical parameters were studied: overlap length and patch thickness. The numerical model used ABAQUS® software and a developed cohesive mixed-mode damage model adequate for ductile adhesives, and implemented within interface finite elements. Stress analyses and strength predictions were carried out. Experimental and numerical comparisons were performed on failure modes, failure load and equivalent stiffness of the repair. Good correlation was found between experimental and numerical results, showing that the proposed model can be successfully applied to bonded joints or repairs.

Tensile behaviour of single and double-strap repairs on aluminium structures

In this work, an experimental study was performed on the influence of plug filling, loading rate and temperature on the tensile strength of single-strap (SS) and double-strap (DS) repairs on aluminium structures. The experimental programme includes repairs with different values of overlap length (LO=10, 20 and 30 mm), and with and without plug filling. The influence of the testing speed on the repairs strength is also addressed (considering 0.5, 5 and 25 mm/min). Accounting for the temperature effects, tests were carried out at room temperature, 50ºC and 80ºC. This will permit a comparative evaluation of the adhesive tested below and above the Glass Transition Temperature (Tg), established by the manufacturer at 67ºC. The global tendencies of the test results concerning the plug filling and overlap length analyses are interpreted from the fracture modes and typical stress distributions for bonded repairs. According to the results obtained from this work, design guidelines for repairing aluminium structures were recommended.

Single-lap joints of similar and dissimilar adherends bonded with an acrylic adhesive

In this study, the tensile strength of single-lap joints (SLJs) between similar and dissimilar adherends bonded with an acrylic adhesive was evaluated experimentally and numerically. The adherend materials included polyethylene (PE), polypropylene (PP), carbon-epoxy (CFRP), and glass-polyester (GFRP) composites. The following adherend combinations were tested: PE/PE, PE/PP, PE/CFRP, PE/GFRP, PP/PP, CFRP/CFRP, and GFRP/GFRP. One of the objectives of this work was to assess the influence of the adherends stiffness on the strength of the joints since it significantly affects the peel stresses magnitude in the adhesive layer. The experimental results were also used to validate a new mixed-mode cohesive damage model developed to simulate the adhesive layer. Thus, the experimental results were compared with numerical simulations performed in ABAQUS®, including a developed mixed-mode (I+II) cohesive damage model, based on the indirect use of fracture mechanics and implemented within interface finite elements. The cohesive laws present a trapezoidal shape with an increasing stress plateau, to reproduce the behaviour of the ductile adhesive used. A good agreement was found between the experimental and numerical results.

Adhesion and wear behaviour of NCD coatings on Si3N4 by micro-abrasion tests

Nanocrystalline diamond (NCD) coatings offer an excellent alternative for tribological applications, preserving most of the intrinsic mechanical properties of polycrystalline CVD diamond and adding to it an extreme surface smoothness. Silicon nitride (Si3N4) ceramics are reported to guarantee high adhesion levels to CVD microcrystalline diamond coatings, but the NCD adhesion to Si3N4 is not yet well established. Micro-abrasion tests are appropriate for evaluating the abrasive wear resistance of a given surface, but they also provide information on thin film/substrate interfacial resistance, i.e., film adhesion. In this study, a comparison is made between the behaviour of NCD films deposited by hot-filament chemical vapour deposition (HFCVD) and microwave plasma assisted chemical vapour deposition (MPCVD) techniques. Silicon nitride (Si3N4) ceramic discs were selected as substrates. The NCD depositions by HFCVD and MPCVD were carried out using H2–CH4 and H2–CH4–N2 gas mixtures, respectively. An adequate set of growth parameters was chosen for each CVD technique, resulting in NCD films having a final thickness of 5 m. A micro-abrasion tribometer was used, with 3 m diamond grit as the abrasive slurry element. Experiments were carried out at a constant rotational speed (80 r.p.m.) and by varying the applied load in the range of 0.25–0.75 N. The wear rate for MPCVD NCD (3.7±0.8 × 10−5 m3N−1m−1) is compatible with those reported for microcrystalline CVD diamond. The HFCVD films displayed poorer adhesion to the Si3N4 ceramic substrates than the MPCVD ones. However, the HFCVD films show better wear resistance as a result of their higher crystallinity according to the UV Raman data, despite evidencing premature adhesion failure.

Micro-abrasion wear behaviour of TiAlCrSiN nanostructured coatings

The injection process of glass fibres reinforced plastics promotes the moulds surface degradation by erosion. In order to improve its wear resistance, several kinds of PVD thin hard coatings were used. It is well-known that nanostructures present a better compromise between hardness and toughness. Indeed, when the coating is constituted by a large number of ultra-thin different layers, cracks and interface troubles tend to decrease. However, it is not clear that these nanostructures present a better wear behaviour in erosion processes. In order to study its wear behaviour, a sputtered PVD nanostructured TiAlCrSiN coating was used. The substrate and film surfaces topography were analyzed by profilometry and atomic force microscopy techniques. Film adhesion to the substrate was evaluated by scratch tests. The surface hardness was measured with a Vickers micro-hardness tester. The wear resistance was evaluated by micro-abrasion with a rotating ball tribometer tests. Slurry of SiC particles in distilled water was used in order to provoke the surface abrasion. Different duration tests were performed in order to analyze the wear evolution. After these tests, the wear mechanisms developed were analyzed by scanning electron microscopy. Wear craters were measured and the wear rate was calculated and discussed. With the same purpose, coated inserts were mounted in an injection mould working with a 30% glass fibres reinforced polypropylene. After 45 000 cycles no relevant wear was registered.