Eastwards / westwards: which direction for gender studies in the 21st century?

Eastwards / Westwards: Which Direction for Gender Studies in the XXIst Century? is a collection of essays which focus on themes and methods that characterize current research into gender in Asian countries in general. In this collection, ideas derived from Gender Studies elsewhere in the world have been subjected to scrutiny for their utility in helping to describe and understand regional phenomena. But the concepts of Local and Global – with their discoursive productions – have not functioned as a binary opposition: localism and globalism are mutually constitutive and researchers have interrogated those spaces of interaction between the ‘self’ and the ‘other’, bearing in mind their own embeddedness in social and cultural structures and their own historical memory. Contributors to this collection provided a critical transnational perspective on some of the complex effects of the dynamics of cultural globalization, by exploring the relation between gender and development, language, historiography, education and culture. We have also given attention to the ideological and rhetorical processes through which gender identity is constructed, by comparing textual grids and patterns of expectation. Likewise, we have discussed the role of ethnography, anthropology, historiography, sociology, fiction, popular culture and colonial and post-colonial sources in (re)inventing old/new male/female identities, their conversion into concepts and circulation through time and space. This multicultural and trans-disciplinary selection of essays is totally written in English, fully edited and revised, therefore, it has a good potential for an immediate international circulation. This project may trace new paths and issues for discussion on what concerns the life, practices and narratives by and about women in Asia, as well as elsewhere in the present day global experience. Academic readership: Researchers, scholars, educators, graduate and post-graduate students, doctoral students and general non-fiction readers, with a special interest in Gender Studies, Asia, Colonial and Post-Colonial Literature, Anthropology, Cultural Studies, History, Historiography, Politics, Race, Feminism, Language, Linguistics, Power, Political and Feminist Agendas, Popular Culture, Education, Women’s Writing, Religion, Multiculturalism, Globalisation, Migration. Chapter summary: 1. “Social Gender Stereotypes and their Implication in Hindi”, Anjali Pande, Jawaharlal Nehru University, New Delhi, India. This essay looks at the subtle ways in which gender identities are constructed and reinforced in India through social norms of language use. Language itself becomes a medium for perpetuating gender stereotypes, forcing its speakers to confirm to socially defined gender roles. Using examples from a classroom discussion about a film, this essay will highlight the underlying rigid male-female stereotypes in Indian society with their more obvious expressions in language. For the urban woman in India globalisation meant increased economic equality and exposure to changed lifestyles. On an individual level it also meant redefining gender relations and changing the hierarchy in man-­woman relationships. With the economic independence there is a heightened sense of liberation in all spheres of social life, a confidence to fuzz the rigid boundaries of gender roles. With the new films and media celebrating this liberated woman, who is ready to assert her sexual needs, who is ready to explode those long held notions of morality, one would expect that the changes are not just superficial. But as it soon became obvious in the course of a classroom discussion about relationships and stereotypes related to age, the surface changes can not become part of the common vocabulary, for the obvious reason that there is still a vast gap between the screen image of this new woman and the ground reality. Social considerations define the limits of this assertiveness of women, whereas men are happy to be liberal within the larger frame of social sanctions. The educated urban woman in India speaks in favour of change and the educated urban male supports her, but one just needs to scratch the surface to see the time tested formulae of gender roles firmly in place. The way the urban woman happily balances this emerging promise of independence with her gendered social identity, makes it necessary to rethink some aspects of looking at gender in a gradually changing, traditional society like India. 2. “The Linguistic Dimension of Gender Equality”, Alissa Tolstokorova, Kiev Centre for Gender Information and Education, Ukraine. The subject-matter of this essay is gender justice in language which, as I argue, may be achieved through the development of a gender-related approach to linguistic human rights. The last decades of the 20th century, globally marked by a “gender shift” in attitudes to language policy, gave impetus to the social movement for promoting linguistic gender equality. It was initiated in Western Europe and nowadays is moving eastwards, as ideas of gender democracy progress into developing countries. But, while in western societies gender discrimination through language, or linguistic sexism, was an issue of concern for over three decades, in developing countries efforts to promote gender justice in language are only in their infancy. My argument is that to promote gender justice in language internationally it is necessary to acknowledge the rights of women and men to equal representation of their gender in language and speech and, therefore, raise a question of linguistic rights of the sexes. My understanding is that the adoption of the Universal Declaration of Linguistic Rights in 1996 provided this opportunity to address the problem of gender justice in language as a human rights issue, specifically as a gender dimension of linguistic human rights. 3. “The Rebirth of an Old Language: Issues of Gender Equality in Kazakhstan”, Maria Helena Guimarães, Polytechnic Institute of Porto, Portugal. The existing language situation in Kazakhstan, while peaceful, is not without some tension. We propose to analyze here some questions we consider relevant in the frame of cultural globalization and gender equality, such as: free from Russian imperialism, could Kazakhstan become an easy prey of Turkey’s “imperialist dream”? Could these traditionally Muslim people be soon facing the end of religious tolerance and gender equality, becoming this new old language an easy instrument for the infiltration in the country of fundamentalism (it has already crossed the boarders of Uzbekistan), leading to a gradual deterioration of its rich multicultural relations? The present structure of the language is still very fragile: there are three main dialects and many academics defend the re-introduction of the Latin alphabet, thus enlarging the possibility of cultural “contamination” by making the transmission of fundamentalist ideas still easier through neighbour countries like Azerbaijan, Uzbekistan and Turkmenistan (their languages belong to the same sub-group of Common Turkic), where the Latin alphabet is already in use, and where the ground for such ideas shown itself very fruitful. 4. “Construction of Womanhood in the Bengali Language of Bangladesh”, Raasheed Mahmood; University of New South Wales, Sydney. The present essay attempts to explore the role of gender-based language differences and of certain markers that reveal the status accorded to women in Bangladesh. Discrimination against women, in its various forms, is endemic in communities and countries around the world, cutting across class, race, age, and religious and national boundaries. One cannot understand the problems of gender discrimination solely by referring to the relationship of power or authority between men and women. Rather one needs to consider the problem by relating it to the specific social formation in which the image of masculinity and femininity is constructed and reconstructed. Following such line of reasoning this essay will examine the nature of gender bias in the Bengali language of Bangladesh, holding the conviction that as a product of social reality language reflects the socio-cultural behaviour of the community who speaks it. This essay will also attempt to shed some light on the processes through which gender based language differences produce actual consequences for women, who become exposed to low self-esteem, depression and systematic exclusion from public discourse. 5. “Marriage in China as an expression of a changing society”, Elisabetta Rosado David, University of Porto, Portugal, and Università Ca’Foscari, Venezia, Italy. In 29 April 2001, the new Marriage Law was promulgated in China. The first law on marriage was proclaimed in 1950 with the objective of freeing women from the feudal matrimonial system. With the second law, in 1981, values and conditions that had been distorted by the Cultural Revolution were recovered. Twenty years later, a new reform was started, intending to update marriage in the view of the social and cultural changes that occurred with Deng Xiaoping’s “open policy”. But the legal reform is only the starting point for this case-study. The rituals that are followed in the wedding ceremony are often hard to understand and very difficult to standardize, especially because China is a vast country, densely populated and characterized by several ethnic minorities. Two key words emerge from this issue: syncretism and continuity. On this basis, we can understand tradition in a better way, and analyse whether or not marriage, as every social manifestation, has evolved in harmony with Chinese culture. 6. “The Other Woman in the Portuguese Colonial Empire: The Case of Portuguese India”, Maria de Deus Manso, University of Évora, Portugal. This essay researches the social, cultural and symbolic history of local women in the Portuguese Indian colonial enclaves. The normative Portuguese overseas history has not paid any attention to the “indigenous” female populations in colonial Portuguese territories, albeit the large social importance of these social segments largely used in matrimonial and even catholic missionary strategies. The first attempt to open fresh windows in the history of this new field was the publication of Charles Boxer’s referential study about Women in lberian Overseas Expansion, edited in Portugal only after the Revolution of 1975. After this research we can only quote some other fragmentary efforts. In fact, research about the social, cultural, religious, political and symbolic situation of women in the Portuguese colonial territories, from the XVI to the XX century, is still a minor historiographic field. In this essay we discuss this problem and we study colonial representations of women in the Portuguese Indian enclaves, mainly in the territory of Goa, using case studies methodologies. 7. “Heading East this Time: Critical Readings on Gender in Southeast Asia”, Clara Sarmento, Polytechnic Institute of Porto, Portugal. This essay intends to discuss some critical readings of fictional and theoretical texts on gender condition in Southeast Asian countries. Nowadays, many texts about women in Southeast Asia apply concepts of power in unusual areas. Traditional forms of gender hegemony have been replaced by other powerful, if somewhat more covert, forms. We will discuss some universal values concerning conventional female roles as well as the strategies used to recognize women in political fields traditionally characterized by male dominance. Female empowerment will mean different things at different times in history, as a result of culture, local geography and individual circumstances. Empowerment needs to be perceived as an individual attitude, but it also has to be facilitated at the macro­level by society and the State. Gender is very much at the heart of all these dynamics, strongly related to specificities of historical, cultural, ethnic and class situatedness, requiring an interdisciplinary transnational approach.

Effect of the compact Ti layer on the efficiency of dye-sensitized solar cells assembled using stainless steel sheets

Titanium films have been deposited on stainless steel metal sheets using dc magnetron sputtering technique at different substrate temperatures. The structure of the titanium films strongly depend on the substrate temperature. The titanium film deposited at the substrate temperature lower than 300 ◦C has a loose flat sheet grains structure and the titanium film prepared at the substrate temperature higher than 500 ◦C has a dense nubby grains structure. The DSSC assembled using stainless steel sheet coated with titanium film deposited at high substrate temperature has a low charge transfer resistance in the TiO2/Ti interface and results in a high conversion efficiency. The DSSC assembled using stainless steel sheet coated with titanium film deposited at temperature higher than 500 ◦C has higher conversion efficiency than that assembled using titanium metal sheet as the substrate. The maximum conversion efficiency, 2.26% is obtained for DSSC assembled using stainless steel sheet coated with titanium film deposited at 700 ◦C substrate temperature, which is about 70% of the conversion efficiency of the FTO reference cell used in this study.

ß-Lactams: chemical structure, mode of action and mechanisms of resistance

This synopsis summarizes the key chemical and bacteriological characteristics of β-lactams, penicillins, cephalosporins, carbanpenems, monobactams and others. Particular notice is given to first-generation to fifth-generation cephalosporins. This review also summarizes the main resistance mechanism to antibiotics, focusing particular attention to those conferring resistance to broad-spectrum cephalosporins by means of production of emerging cephalosporinases (extended-spectrum β-lactamases and AmpC β-lactamases), target alteration (penicillin-binding proteins from methicillin-resistant Staphylococcus aureus) and membrane transporters that pump β-lactams out of the bacterial cell.

After Bologna: does the shift in structure bring forth a shift in a attitude?

With this case-study, we (i) intend to show how a semester project on creating a Multimedia CV could, to some extent, help Portuguese final-year students develop some generic competences, change their attitude towards the challenge of "How to Apply fro a Job" and increase their self-marketing strategies, creativity and entrepreneurship cannot answer the question of the paper, but intend onlu to raise it fot further and better studies now that Bologna design is implementes in almost all HEIs Europe.

Shane Meadows’ country: analysis of the film this is England (2006)

This Is England is social realist film portraying racism and poverty in 1980s Britain through the eyes of Shaun, a 12 year old boy, who has lost his father in the Falklands war and as to come to terms with his own identity, the difficult transition from childhood to adolescence and the need to fit in a determined group/tribe/gang. The following article aims at analysing relevant aspects depicted from the film emphasizing the so much debated reality of life during 80s. In This is England Shane Meadows manages to rediscover his own self geography, by revisiting his adolescent years. It is a biographical film about the importance of peer pressure and the results of an excess of nationalism, at the same time it typifies some issues related to the 80s youth culture.

Adsorptive stripping voltammetric determination of venlafaxine in urine with a mercury film microelectrode

An adsorptive stripping voltammetric procedure for the determination of the antidepressant venlafaxine in urine using a mercury film microelectrode wasdeveloped. The method is based on controlled adsorptive accumulation of the drug at the potential of 1.00V (vs. Ag/AgCl) in the presence of 1.25 x10 -2 molL- 1 borate buffer (pH 8.7). Urine samples were analyzed directly after performing a ten-fold dilution with the supporting electrolyte but without other pretreatment. The limit of detection obtained for a 30 s collection time was 0.693x 10- 6 mol L -1. Recovery experimentsgave good results at the 10 -6 mol L- 1 level (bias less 5% were obtained).

Voltammetric determination of dialifos in soils with a mercury film ultramicroelectrode

An extraction-adsorptive stripping voltammetric procedure for the determination of the pesticide dialifos in soil samples using microwave-assisted solvent extraction and a mercury film ultramicroelectrode was developed. The method is based on the use of hexane-acetone solvent (1:1, v/v) and on controlled adsorptive accumulation of the insecticide at the potential of -0.10V (versus Ag/AgCl) in the presence of Britton-Robinson buffer (pH 2.0). Soil sample extracts were analyzed directly after drying and redissolution with the supporting electrolyte, but without other pretreatment. The limit of detection obtained for a 10sec collection time was 2.0x10-8 mol L-1. Recovery experiments for the global procedure, at the 0.100µgg-1 level, gave satisfactory average and standard deviation results for the two different soils tested.

Structural modification of TiO2 nanorod films with an influence on the photovoltaic efficiency of a dye-sensitized solar cell (DSSC).

TiO2 nanorod films have been deposited on ITO substrates by dc reactive magnetron sputtering technique. The structures of these nanorod films were modified by the variation of the oxygen pressure during the sputtering process. Although all these TiO2 nanorod films deposited at different oxygen pressures show an anatase structure, the orientation of the nanorod films varies with the oxygen pressure. Only a very weak (101) diffraction peak can be observed for the TiO2 nanorod film prepared at low oxygen pressure. However, as the oxygen pressure is increased, the (220) diffraction peak appears and the intensity of this diffraction peak is increased with the oxygen pressure. The results of the SEM show that these TiO2 nanorods are perpendicular to the ITO substrate. At low oxygen pressure, these sputtered TiO2 nanorods stick together and have a dense structure. As the oxygen pressure is increased, these sputtered TiO2 nanorods get separated gradually and have a porous structure. The optical transmittance of these TiO2 nanorod films has been measured and then fitted by OJL model. The porosities of the TiO2 nanorod films have been calculated. The TiO2 nanorod film prepared at high oxygen pressure shows a high porosity. The dye-sensitized solar cells (DSSCs) have been assembled using these TiO2 nanorod films prepared at different oxygen pressures as photoelectrode. The optimum performance was achieved for the DSSC using the TiO2 nanorod film with the highest (220) diffraction peak and the highest porosity.

Study of vanadium doped ZnO films prepared by dc reactive magnetron sputtering at different substrate temperatures

ZnO films doped with vanadium (ZnO:V) have been prepared by dc reactive magnetron sputtering technique at different substrate temperatures (RT–500 C). The effects of the substrate temperature on ZnO:V films properties have been studied. XRD measurements show that only ZnO polycrystalline structure has been obtained, no V2O5 or VO2 crystal phase can be observed. It has been found that the film prepared at low substrate temperature has a preferred orientation along the (002) direction. As the substrate temperature is increased, the (002) peak intensity decreases. When the substrate temperature reaches the 500 C, the film shows a random orientation. SEM measurements show a clear formation of the nano-grains in the sample surface when the substrate temperature is higher than 400 C. The optical properties of the films have been studied by measuring the specular transmittance. The refractive index has been calculated by fitting the transmittance spectra using OJL model combined with harmonic oscillator.

Effects of sulphurization time on Cu2ZnSnS4 absorbers and thin films solar cells obtained from metallic precursors

We report the results of a study of the sulphurization time effects on Cu2ZnSnS4 absorbers and thin film solar cells prepared from dc-sputtered tackedmetallic precursors. Three different time intervals, 10 min, 30min and 60 min, at maximum sulphurization temperature were considered. The effects of this parameter' change were studied both on the absorber layer properties and on the final solar cell performance. The composition, structure, morphology and thicknesses of the CZTS layers were analyzed. The electrical characterization of the absorber layer was carried out by measuring the transversal electrical resistance of the samples as a function of temperature. This study shows an increase of the conductivity activation energy from 10 meV to 54meV for increasing sulphurization time from 10min to 60min. The solar cells were built with the following structure: SLG/Mo/CZTS/CdS/i-ZnO/ZnO:Al/Ni:Al grid. Several ac response equivalent circuit models were tested to fit impedance measurements. The best results were used to extract the device series and shunt resistances and capacitances. Absorber layer's electronic properties were also determined using the Mott–Schottky method. The results show a decrease of the average acceptor doping density and built-in voltage, from 2.0 1017 cm−3 to 6.5 1015 cm−3 and from 0.71 V to 0.51 V, respectively, with increasing sulphurization time. These results also show an increase of the depletion region width from approximately 90 nm–250 nm.

Cu2ZnSnS4 absorber layers obtained through sulphurization of metallic precursors: Graphite box versus sulphur flux

In this work we employed a hybrid method, combining RF-magnetron sputtering with evaporation, for the deposition of tailor made metallic precursors, with varying number of Zn/Sn/Cu (ZTC) periods and compared two approaches to sulphurization. Two series of samples with 1×, 2× and 4× ZTC periods have been prepared. One series of precursors was sulphurized in a tubular furnace directly exposed to a sulphur vapour and N2+5% H2 flux at a pressure of 5.0×10+4 Pa. A second series of identical precursors was sulphurized in the same furnace but inside a graphite box where sulphur pellets have been evaporated again in the presence of N2+5% H2 and at the same pressure as for the sulphur flux experiments. The morphological and chemical analyses revealed a small grain structure but good average composition for all three films sulphurized in the graphite box. As for the three films sulphurized in sulphur flux grain growth was seen with the increase of the number of ZTC periods whilst, in terms of composition, they were slightly Zn poor. The films' crystal structure showed that Cu2ZnSnS4 is the dominant phase. However, in the case of the sulphur flux films SnS2 was also detected. Photoluminescence spectroscopy studies showed an asymmetric broad band emission whichoccurs in the range of 1–1.5 eV. Clearly the radiative recombination efficiency is higher in the series of samples sulphurized in sulphur flux. We have found that sulphurization in sulphur flux leads to better film morphology than when the process is carried out in a graphite box in similar thermodynamic conditions. Solar cells have been prepared and characterized showing a correlation between improved film morphology and cell performance. The best cells achieved an efficiency of 2.4%.

Growth and Raman scattering characterization of Cu2ZnSnS4 thin films

In the present work we report the results of the growth, morphological and structural characterization of Cu2ZnSnS4 (CZTS) thin films prepared by sulfurization of DC magnetron sputtered Cu/Zn/Sn precursor layers. The adjustment of the thicknesses and the properties of the precursors were used to control the final composition of the films. Its properties were studied by SEM/EDS, XRD and Raman scattering. The influence of the sulfurization temperature on the morphology, composition and structure of the films has been studied. With the presented method we have been able to prepare CZTS thin films with the kesterite structure.

Admittance spectroscopy of Cu2ZnSnS4 based thin film solar cells

In this report, we propose an AC response equivalent circuit model to describe the admittance measurements of Cu2ZnSnS4 thin film solar cell grown by sulphurization of stacked metallic precursors. This circuit describes the contact resistances, the back contact, and the heterojunction with two trap levels. The study of the back contact resistance allowed the estimation of a back contact barrier of 246 meV. The analysis of the trap series with varying temperature revealed defect activation energies of 45 meV and 113 meV. The solar cell’s electrical parameters were obtained from the J-V curve: conversion efficiency, 1.21%; fill factor, 50%; open circuit voltage, 360 mV; and short circuit current density, 6.8 mA/cm2.

Mo bilayer for thin film photovoltaics revisited

Thin film solar cells based on Cu(In,Ga)Se2 as an absorber layer use Mo as the back contact. This metal is widely used in research and in industry but despite this, there are only a few published studies on the properties of Mo. Properties such as low resistivity and good adhesion to soda lime glass are hard to obtain at the same time. These properties are dependent on the deposition conditions and are associated with the overall stress state of the film. In this report, a study of the deposition of a Mo bilayer is carried out by analysing first single and then bilayers. The best properties of the bilayer were achieved when the bottom layer was deposited at 10 × 10−3 mbar with a thickness of 500 nm and the top layer deposited at 1 × 10−3 mbar with a thickness of 300 nm. The films deposited under these conditions showed good adhesion and a sheet resistivity lower than 0.8 .

Assessment of the potential of tin sulphide thin films prepared by sulphurization of metallic precursors as cell absorbers

In this work, SnxSy thin films have been grown on soda-lime glass substrates by sulphurization of metallic precursors in a nitrogen plus sulphur vapour atmosphere. Different sulphurization temperatures were tested, ranging from 300 °C to 520 °C. The resulting phases were structurally investigated by X-Ray Diffraction and Raman spectroscopy. Composition was studied using Energy Dispersive Spectroscopy being then correlated with the sulphurization temperature. Optical measurements were performed to obtain transmittance and reflectance spectra, from which the energy band gaps, were estimated. The values obtained were 1.17 eV for the indirect transition and for the direct transition the values varied from 1.26 eV to 1.57 eV. Electrical characterization using Hot Point Probe showed that all samples were p-type semiconductors. Solar cells were built using the structure: SLG/Mo/SnxSy/CdS/ZnO:Ga and the best result for solar cell efficiency was 0.17%.