IX International conference on Remote Engineering and Virtual instrumentation REV 2012

THE ninth edition of the International Conference on Remote Engineering and Virtual Instrumentation (REV) [1] was held at the Faculty of Engineering of the University of Deusto, Bilbao (Spain), from the 4th to the 6th of July, 2012. A world-class research community in the subject of remote and virtual laboratories joined the event.

Preservice teachers' knowledge on elementary geometry concepts

This text is based on a research, which is still in progress, whose main objective is to identify and understand what are the main difficulties of future mathematics teachers of basic education are, regarding their content knowledge in geometry in the context of the curricular unit of Geometry during their undergraduate degree. We chose a qualitative approach in the form of case study, in which data collection was done through observation, interviews, a diverse set of tasks, a diagnostic test and other documents. This paper focuses on the test given to prospective teachers at the beginning of the course. The preliminary analysis of the data points to a weak performance of preservice teachers in the test issues addressing elementary knowledge of Geometry.

Some applications of fractional calculus in engineering

Fractional Calculus FC goes back to the beginning of the theory of differential calculus. Nevertheless, the application of FC just emerged in the last two decades, due to the progress in the area of chaos that revealed subtle relationships with the FC concepts. In the field of dynamical systems theory some work has been carried out but the proposed models and algorithms are still in a preliminary stage of establishment. Having these ideas in mind, the paper discusses FC in the study of system dynamics and control. In this perspective, this paper investigates the use of FC in the fields of controller tuning, legged robots, redundant robots, heat diffusion, and digital circuit synthesis.

Structuring and moodleing a course: case studies at the polytechnic of Porto - School of engineering

This work presents a comparative study covering four different courses lectured at the Polytechnic of Porto - School of Engineering, in respect to the usage of a particular Learning Management System, i.e. Moodle, and its impact on students' results. Even though positive correlation factors exist, e.g. between the number of Moodle accesses versus the final exam grade obtained by each student, the explanation behind it may not be straightforward. Mapping this particular factor to course numbers reveals that the quality of the resources might be preponderant and not only their quantity. This paper also addresses teachers who used this platform as a complement to their courses (b-learning) and identifies some particular issues they should be aware in order to potentiate students' engagement and learning.

VISIR deployment in undergraduate engineering practices

Practical sessions are the backbone of qualification in engineering education. It leads to a better understanding and allows mastering scientific concepts and theories. The lack of the availability of practical sessions at many universities and institutions owing to the cost and the unavailability of instructors the most of the time caused a significant decline in experimentation in engineering education over the last decades. Recently, with the progress of computer-based learning, remote laboratories have been proven to be the best alternative to the traditional ones, regarding to its low cost and ubiquity. Some universities have already started to deploy remote labs in their practical sessions. This contribution compiles diverse experiences based on the deployment of the remote laboratory, Virtual Instrument Systems in Reality (VISIR), on the practices of undergraduate engineering grades at various universities within the VISIR community. It aims to show the impact of its usage on engineering education concerning the assessments of students and teachers as well.

Using SysML in systems design

System of systems involves several secondary systems working together with its creation gathering the knowledge of several distinct disciplines and teams, each one with their own background and methods, leading to a difficult communication between them. SysML, a language originated from UML, enables that communication, without background interference, with the use of a rich notation for systems design. This paper analyzes its use through the experience gained in the design of a chemical system with SysML.

Engaging students by moodleing a course? Case studies at the Polytechnic of Porto–School of Engineering

This work presents a comparative study covering four different courses lectured at the Polytechnic of Porto - School of Engineering, regarding the usage of a particular Learning Management System, i.e. Moodle, and its impact on students' results. This study addresses teachers who used this platform as a complement to their courses (b-learning) and identifies some particular issues in order to potentiate students' engagement and learning. Even though positive correlation factors exist, e.g. between the number of Moodle accesses versus the final exam grade obtained by each student, the explanation behind it may not be straightforward. Mapping this particular factor to course numbers reveals that the quality of the resources might be preponderant and not only their quantity. These results point to the fact that some dynamic resources might enlarge students' engagement.

Particle swarm design of digital circuits

Swarm Intelligence (SI) is the property of a system whereby the collective behaviors of (unsophisticated) agents interacting locally with their environment cause coherent functional global patterns to emerge. Particle swarm optimization (PSO) is a form of SI, and a population-based search algorithm that is initialized with a population of random solutions, called particles. These particles are flying through hyperspace and have two essential reasoning capabilities: their memory of their own best position and knowledge of the swarm's best position. In a PSO scheme each particle flies through the search space with a velocity that is adjusted dynamically according with its historical behavior. Therefore, the particles have a tendency to fly towards the best search area along the search process. This work proposes a PSO based algorithm for logic circuit synthesis. The results show the statistical characteristics of this algorithm with respect to number of generations required to achieve the solutions. It is also presented a comparison with other two Evolutionary Algorithms, namely Genetic and Memetic Algorithms.

Remote and mobile experimentation: pushing the boundaries of an ubiquitous learning place

Concepts like E-learning and M-learning are changing the traditional learning place. No longer restricted to well-defined physical places, education on Automation and other Engineering areas is entering the so-called ubiquitous learning place, where even the more practical knowledge (acquired at lab classes) is now moving into, due to emergent concepts such as Remote Experimentation or Mobile Experimentation. While Remote Experimentation is traditionally regarded as the remote access to real-world experiments through a simple web browser running on a PC connected to the Internet, Mobile Experimentation may be seen as the access to those same (or others) experiments, through mobile devices, used in M-learning contexts. These two distinct client types (PCs versus mobile devices) pose specific requirements for the remote lab infrastructure, namely the ability to tune the experiment interface according to the characteristics (e.g. display size) of the accessing device. This paper addresses those requirements, namely by proposing a new architecture for the remote lab infrastructure able to accommodate both Remote and Mobile Experimentation scenarios.

Ferramenta de cálculo de engrenagens - ENGRECALC

As engrenagens com dentes em evolvente de círculo têm sido e continuarão a ser um dos órgãos de máquinas mais utilizados em Engenharia Mecânica. O seu elevado uso e a sua versatilidade têm promovido o seu desenvolvimento permitido avanços no que diz respeito à sua eficiência, durabilidade, capacidade de carga e fiabilidade. Porém, para além da relativa facilidade de se poder encontrar literatura relativamente às engrenagens, o seu cálculo é complexo. São necessários conhecimentos da geometria de rodas dentadas e dos materiais envolvidos no seu fabrico. Este trabalho tem por objectivo o estudo de engrenagens de dentado recto com o desenvolvimento de uma ferramenta com base no software MatLab®. Esta ferramenta permitirá ao utilizador estudar a influência de condições de funcionamento e parâmetros da engrenagem na resistência à fadiga superficial e de flexão.

Direcção e gestão de obra – obra de arte – Ponte sobre o Rio Lombe – Angola

Este relatório diz respeito ao trabalho desenvolvido em ambiente de estágio académico numa empreitada de Obra Pública, compreendendo a construção da nova ponte sobre o rio Lombe, na EN230, Estrada N’Dalatando – Malanje, Província de Malanje, República de Angola. O estágio foi realizado na CONDURIL – Engenharia, S.A. – Sucursal Angola, empresa dedicada à execução de obras de engenharia civil e obras públicas, com uma vasta experiencia profissional nesta área de actividade. O objectivo deste relatório, para além da descrição de todos os trabalhos práticos de execução da obra, é de transcrever os conhecimentos adquiridos ao longo do estágio, nomeadamente no que concerne aos dos processos de ‘Gestão, Coordenação e Planeamento’, imputáveis as funções da ‘Direcção Técnica de Obra’ durante toda a fase de execução da empreitada, estando o principal foco na descrição das actividades referentes ao controlo da obra.

Relatório de estágio Direcção e gestão de obra - Obra de Arte Ponte sobre o rio Lombe – Angola

Mestrado em Engenharia Civil - Tecnologia e Gestão das Construções

Porto Polytechnical Engineering School sustainable development action plan

Porto Polytechnical Engineering School (ISEP), a Global Reporting Initiative training partner in Portugal, has just presented its Sustainable Development Action Plan (PASUS), which main objective is the formation of a new kind of engineers, with a Sustainable Development (SD) philosophy in the core of their academic curricula courses.

Gestão de multi-projeto no processo de desenvolvimento de produto

No âmbito da unidade curricular Dissertação/Projeto/Estágio do 2º ano do Mestrado em Engenharia mecânica – Ramo Gestão Industrial do Instituto Superior de Engenharia do Porto, o presente trabalho de dissertação foi enquadrado num projeto de desenvolvimento de ferramentas de apoio à gestão de projetos. O projeto foi desenvolvido no Instituto de Engenharia Mecânica e Gestão Industrial (INEGI) na unidade de Desenvolvimento de Produto e Sistemas (DPS). A realização deste projeto teve como objetivo o desenvolvimento e adequação de ferramentas de apoio à gestão de multi-projeto no processo de desenvolvimento de produto na organização em estudo – o INEGI – DPS. A gestão de projetos tem hoje uma grande importância nos resultados das empresas essencialmente em virtude da necessidade de estas competirem num mundo em grande mudança com concorrentes ferozes, em que a capacidade de responder às mudanças a tempo e de uma forma integrada se torna cada vez mais importante. A atividade levada a cabo pela DPS impõe a necessidade de uma gestão de projetos mais eficaz e eficiente suportada numa gestão de informação centralizada. O presente projeto de investigação teve, numa primeira fase, uma adaptação à organização em estudo. De seguida, foi conduzida uma revisão da literatura com o objetivo de se obter a fundamentação teórica necessária ao desenvolvimento de ferramentas com base nas metodologias lean. Prosseguiu com o levantamento da situação inicial da organização e com a identificação dos problemas existentes na gestão de projetos. Incluiu também uma revisão e análise das ferramentas existentes na unidade em estudo. Este conhecimento permitiu delinear uma visão para guiar o desenvolvimento das ferramentas. Após a definição da visão foi, então, realizado o desenvolvimento das ferramentas de auxílio à gestão multi-projeto na organização. A concretização deste trabalho resultou no desenvolvimento de três ferramentas de auxílio à gestão multi-projeto na unidade. Estas ferramentas tornam o processo de gestão de projetos mais simples e fácil de assimilar, requerendo apenas alguns inputs por parte dos colaboradores. Estas ferramentas estão apoiadas nos pilares do lean, e deste modo estão vocacionadas para reduzir o desperdício, promover a melhoria contínua, aumentar o desempenho global dos vários atores nos projetos de modo a entregar mais valor e qualidade superior com menores custos. Acima de tudo, valorizar o trabalho dos colaboradores, tornando-os mais eficientes, eficazes, motivados e comprometidos com a organização.

Knowledge management in multinational companies: the repatriates’ role in the competitive advantage in subsidiaries

This paper addresses the topic of knowledge management in multinational companies (MNCs). Its purpose is to examine the role of expatriates in knowledge acquisition and transfer within MNCs. Specifically it focuses on knowledge acquisition and transfer from one MNC head office located in Germany to two Portuguese subsidiaries as a basis for competitive advantage in their Portuguese subsidiaries. A qualitative research methodology is used, specifically through an exploratory case study approach, which examines how international assignments are important for the role of expatriates In knowledge acquisition and transfer between foreign head offices and their Portuguese subsidiaries. The data were collected through semi structured interviews to 10 Portuguese repatriates from two Portuguese subsidiaries of one foreign MNC. The findings suggest that the reasons that lead to expatriating employees from Portuguese subsidiaries to foreign head offices are connected to (1) knowledge management strategies to development the subsidiary’s performance; (2) new skills and knowledge acquisition by future team leaders and business/product managers in Portuguese subsidiaries; (3) procuring knowledge, from agents in head office, to be disseminated amongst co-workers in Portuguese subsidiaries; (4) acquiring global management skills, impossible to acquire locally and; (5) developing global projects within MNC. Also our results show that knowledge acquisition and transfer from foreign head office, through subsidiaries’ expatriates, contributes directly to the Portuguese subsidiaries’ innovation, improved performance, competitive advantage and growth in the economic sectors in which they operate. Moreover, evidence reveals that expatriation is seen as a strategy to fulfil some of the main organisational objectives through their expatriates (e.g., create new products and business markets, develop and incorporate new organisational techniques and processes, integrate global teams within multinational corporation with a responsibility on the definition of global objectives). The results obtained suggest that expatriates have a central role in acquiring and transferring strategic knowledge from MNC head office to their subsidiaries located in Portugal. Based on the findings, the paper discusses in detail the main theoretical and managerial implications. Suggestions for further research are also presented. The study’s main limitation is the small size of the sample, but its findings and methodology are quite original and significant.