Design and Implementation of a Biologically Inspired Flying Robot - An EPS@ISEP 2014 Spring Project

The goal of this EPS@ISEP project proposed in the Spring of 2014 was to develop a flapping wing flying robot. The project was embraced by a multinational team composed of four students from different countries and fields of study. The team designed and implemented a robot inspired by a biplane design, constructed from lightweight materials and battery powered. The prototype, called MyBird, was built with a 250 € budget, reuse existing materials as well as low cost solutions. Although the team's initial idea was to build a light radio controlled robot, time limitations along with setbacks involving the required electrical components led to a light but not radio controlled prototype. The team, from the experience gathered, made a number of future improvement suggestions, namely, the addition of radio control and a camera and the adoption of articulated monoplane design instead of the current biplane design for the wings.

Development of Biomimetic Robots in the EPS Engineering Programme Capstone Project

This paper proposes the development of biologically inspired robots as the capstone project of the European Project Semester (EPS) framework. EPS is a one semester student centred international programme offered by a group of European engineering schools (EPS Providers) as part of their student exchange programme portfolio. EPS is organized around a central module (the EPS project) and a set of complementary supportive modules. Project proposals refer to open multidisciplinary real world problems. Its purpose is to expose students to problems of a greater dimension and complexity than those faced throughout the degree programme as well as to put them in contact with the socalled real world, in opposition to the academic world. Students are organized in teams, grouping individuals from diverse academic backgrounds and nationalities, and each team is fully responsible for conducting its project. EPS provides an integrated framework for undertaking capstone projects, which is focused on multicultural and multidisciplinary teamwork, communication, problem-solving, creativity, leadership, entrepreneurship, ethical reasoning and global contextual analysis. The design and development of biologically inspired robots allows the students to fulfil the previously described requirements and objectives and, as a result, we recommend the adoption of these projects within the EPS project capstone module for the benefit of engineering students.

Design and Implementation of a Biologically Inspired Swimming Robot - An EPS@ISEP 2014 Spring Project

This paper presents the development of a fish-like robot called Bro-Fish. Bro-Fish aims to be an educational toy dedicated to teaching mechanics, programming and the physics of floating objects to youngsters. The underlying intention is to awaken the interest of children for technology, especially biomimetic (biologically inspired) approaches, in order to promote sustainability and raise the level of ecological awareness. The main focus of this project was to create a robot with carangiform locomotion and controllable swimming, providing the opportunity to customize parts and experiment with the physics of floating objects. Therefore, the locomotion principles of fishes and mechanisms developed in related projects were analysed. Inspired by this background knowledge, a prototype was designed and implemented. The main achievement is the new tail mechanism that propels the robot. The tail resembles the undulation motion of fish bodies and is actuated in an innovative way, triggered by an elegant movement of a rotating helicoidal. First experimental tests revealed the potential of the proposed methodology to effectively generate forward propulsion.

Development of Biomimetic Robots in the EPS Engineering Programme Capstone Project

This paper presents the development of a fish-like robot called Bro-Fish. Bro-Fish aims to be an educational toy dedicated to teaching mechanics, programming and the physics of floating objects to youngsters. The underlying intention is to awaken the interest of children for technology, especially biomimetic (biologically inspired) approaches, in order to promote sustainability and raise the level of ecological awareness. The main focus of this project was to create a robot with carangiform locomotion and controllable swimming, providing the opportunity to customize parts and experiment with the physics of floating objects. Therefore, the locomotion principles of fishes and mechanisms developed in related projects were analysed. Inspired by this background knowledge, a prototype was designed and implemented. The main achievement is the new tail mechanism that propels the robot. The tail resembles the undulation motion of fish bodies and is actuated in an innovative way, triggered by an elegant movement of a rotating helicoidal. First experimental tests revealed the potential of the proposed methodology to effectively generate forward propulsion.

Innovations in technology: a friendly math project and the learning analytics “challenge”

Currently the world around us "reboots" every minute and “staying at the forefront” seems to be a very arduous task. The continuous and “speeded” progress of society requires, from all the actors, a dynamic and efficient attitude both in terms progress monitoring and moving adaptation. With regard to education, no matter how updated we are in relation to the contents, the didactic strategies and technological resources, we are inevitably compelled to adapt to new paradigms and rethink the traditional teaching methods. It is in this context that the contribution of e-learning platforms arises. Here teachers and students have at their disposal new ways to enhance the teaching and learning process, and these platforms are seen, at the present time, as significant virtual teaching and learning supporting environments. This paper presents a Project and attempts to illustrate the potential that new technologies present as a “backing” tool in different stages of teaching and learning at different levels and areas of knowledge, particularly in Mathematics. We intend to promote a constructive discussion moment, exposing our actual perception - that the use of the Learning Management System Moodle, by Higher Education teachers, as supplementary teaching-learning environment for virtual classroom sessions can contribute for greater efficiency and effectiveness of teaching practice and to improve student achievement. Regarding the Learning analytics experience we will present a few results obtained with some assessment Learning Analytics tools, where we profoundly felt that the assessment of students’ performance in online learning environments is a challenging and demanding task.

Uma formação útil para a literacia no novo contexto de Bolonha

A Declaração de Bolonha (1999) obrigou a mudanças várias, reconfigurando os modelos formativos no espaço europeu do ensino superior, até 2010. A partir de 2006, em Portugal, com a criação e adequação dos cursos superiores existentes ao modelo de Bolonha, verificou-se uma generalizada redução da duração média dos diferentes ciclos de estudo e a definição de competências gerais e específicas para os cursos e estudantes. Reflecte-se sobre a importância da literacia da informação, conceito evolutivo e abrangente, que se pode traduzir, sumariamente, em saber quando e porquê se tem uma necessidade informacional, onde encontrar a informação, como avaliá-la, usá-la e comunicá-la de forma ética, incluindo as competências tecnológicas, definição que se inscreve na interdisciplinar Ciência da Informação e no comportamento informacional. Destaca-se a vantagem de uma formação para a literacia da informação no ensino superior, a qual contribuirá, certamente, para dotar os estudantes das referidas competências e melhorá-las. Defende-se a necessidade de uma desejável inter-acção entre múltiplos agentes educativos, com destaque para a trilogia estudantes, bibliotecários e professores, sendo os primeiros encarados como protagonistas activos das suas aprendizagens e devendo ser dotados de competências de literacia da informação, factor determinante para o seu sucesso. Quanto ao Bibliotecário, dotado de novas competências, entre as quais as tecnológicas, deve ser um facilitador do processo de formação para a literacia - preferencialmente integrada num projecto pedagógico e no currículo - articulando a sua acção educativa com estudantes e docentes. Corroborando a extensão educativa das Bibliotecas e aliando-a ao uso inevitável das novas tecnologias da informação e comunicação, sublinha-se o papel das Bibliotecas Digitais, que podem corresponder eficientemente aos anseios dos utilizadores no acesso a uma informação de qualidade, de forma cómoda, rápida, a baixo custo, com personalização dos serviços online, com inter-acção e socialização, através de ferramentas de edição colaborativa, típicas da Web 2.0.

Aplicação da abordagem KAIZEN na produção de artigos de papelaria

No âmbito da unidade curricular Tese/Dissertação do 2ºano do Mestrado em Engenharia Eletrotécnica – Ramo Sistemas e Planeamento Industrial do Instituto Superior de Engenharia do Porto, o presente trabalho descreve o estágio curricular efetuado num projeto industrial de melhoria em parceria com o Kaizen Institute, uma empresa de consultoria operacional. Este projeto foi desenvolvido numa empresa de produção e redistribuição de artigos de papelaria e escritório, a Firmo AVS – Papeis e Papelaria,S.A.. O acordo efetuado entre o Kaizen Institute e a Firmo AVS foi o de promover e incutir a cultura da melhoria continua e da mudança de atitudes e comportamentos por parte dos colaboradores da Firmo, sendo que numa fase inicial o foco do projeto foi o departamento de produção de envelopes, designada por área piloto, expandindo-se posteriormente a metodologia Kaizen aos restantes departamentos. A realização deste projeto teve como objetivo a implementação de conceitos elementares de melhoria continua nomeadamente alguns pilares ou ferramentas do Total Flow Management (TFM) e do Kaizen Management System (KMS) na empresa Firmo, de forma a reduzir ou eliminar desperdícios, incremento do envolvimento dos colaboradores, melhoria da comunicação e trabalho em equipa, estandardização de processos produtivos, criação de normas de trabalho, utilização de ferramentas SMED para a redução de tempos improdutivos e aumento da produtividade. Várias foram as dificuldades presentes no terreno para a implementação destes objetivos mas com as diversas ferramentas e workshops realizados na organização, conseguiu-se o envolvimento de todos os colaboradores da organização e a obtenção de resultados satisfatórios nomeadamente ao nível da comunicação e trabalho em equipa, organização e limpeza dos postos de trabalho, standard work (normalização do trabalho), diminuição do lead time nos processos produtivos e consequente aumento de produtividade.

Crowdsourcing innovation intermediaries functions

Open innovation is a hot topic in innovation management. Its basic premise is open up the innovation process. The innovation process, in general sense, may be seen as the process of designing, developing and commercializing a novel product or service to improve the value added of a company. The development of Web 2.0 tools facilitates this kind of contributions, opening space to the emergence of crowdsourcing innovation initiatives. Crowdsourcing is a form of outsourcing not directed to other companies but to the crowd by means of an open call mostly through an Internet platform. Innovation intermediaries, in general sense, are organizations that work to enable innovation, that just act as brokers or agents between two or more parties. Usually, they are also engaged in other activities like inter-organizational networking and technology development and related activities. A crowdsourcing innovation intermediary is an organization that mediates the communication and relationship between the seekers – companies that aspire to solve some problem or to take advantage of any business opportunity – with a crowd that is prone to give ideas based on their knowledge, experience and wisdom. This paper identifies and analyses the functions to be performed by an intermediary of crowdsourcing innovation through grounded theory analyses from literature. The resulting model is presented and explained. The resulting model summarizes eight main functions that can be performed by a crowdsourcing process, namely, diagnoses, mediation, linking knowledge, community, evaluation, project management, intellectual property governance and marketing and support. These functions are associated with a learning cycle process which covers all the crowdsourcing activities that can be realized by the broker.

Viva@Matemática project: a different way to see math

Viva@Mat is a project developed by four Math teachers from the School of Industrial Studies and Management (ESEIG) that was born with the fundamental objective of engaging ESEIG students with different math backgrounds in Math challenging activities. Some of these activities were transformed into real palpable materials and others into small interactive ones, being the great majority of them proposed by ESEIG’ students themselves. This small project rapidly grew into something we didn’t expect – it did flow over the walls of our institution to the general involving community – specifically to pre-university schools through the Viva@Math Exhibits – Orange, Blue and Green (the fourth, the Purple one is still in development). Nowadays, Viva@Math Exhibits – the public face of the Project – are itinerant and have been travelling between several, and different institutions (pre-university schools, preparatory schools, libraries, among others), around ESEIG and IPP area of influence and having registered visitors/participants of all ages. In this article we will describe the Viva@Math Project, its different activities that are categorized in some “great groups” like Numerical Trivia, Logic Activities and Mental Calculation, Puzzles, Geometric Curiosities, Magic Tricks, among others, designed to challenge students to use the underlying logical-mathematical reasoning to any ordinary and everyday activity. We will give specific and concrete examples of some of the activities developed and, also, reproduce of the general stimulating feedback the Project receives from the enrolled “actors” (teachers, students and their relatives, institutions, among others). We feel that this Project has become a small “bridge” between the pre-university schools and Higher Education Institutions (HEI), in trying to shorten the “gap” between the institutions of different levels of education and bring them to work together.

Integration of the project team in the classic maintenance cycle

A manutenção é uma área extremamente importante, principalmente na indústria. Devidamente organizada, permitirá um fluxo produtivo devidamente planeado e executado, que permitirá a qualquer empresa manter o nível de facturação desejado e o prazo de entrega acordado com os clientes. De outra forma, poderá originar o caos. No entanto, os desafios de gestão da produção mais correntes, nomeadamente através do Lean Manufacturing, passam a exigir um pouco mais do que uma simples manutenção. Torna-se obrigatório fazer análises económicas que permitam averiguar quando cada equipamento passa a exigir custos de manutenção excessivos, os quais poderão obrigar a um recondicionamento mais acentuado do equipamento, o qual pode passar inclusivamente por uma melhoria da sua performance. Nestes casos, terá que existir uma “cumplicidade” entre a Direcção de Produção e a Manutenção, no sentido de averiguar o melhor momento para proceder a uma melhoria do equipamento, numa perspectiva de funcionamento global em linha de produção, adaptando-o à performance que será exigida ao conjunto. Neste domínio, o Projecto passa a prestar um serviço valiosíssimo à empresa, integrando-se no conjunto Produção + Manutenção, criando valor na intervenção, através do desenvolvimento de um trabalho que permite não só repor o estado natural da produção, mas sim promover uma melhoria sustentada da mesma. Este trabalho pretende reflectir e avaliar a relevância do Projecto neste tipo de operações, contribuindo de uma forma sistemática e sustentada para a melhoria contínua dos processos de fabrico. É apresentado um caso de estudo que pretende validar todo o desenvolvimento anteriormente realizado na matéria.

The Entre4Future project

This paper presents some of the results already achieved in the European project titled "Simulation for Entrepreneurship - ENTRE4FUTURE". Seven organizations from six different countries participate in this project. Organizations are from two different groups. We have a group of five educational organizations from Romania (project leader), Portugal, Spain, Austria and Denmark. The second group is constituted by two affiliates of chambers of commerce of Romania and Cyprus. The purpose of ENTRE4FUTURE is the exchange of professional experience in matters relating to teaching methodologies, with the curricula of the business simulation and the methodology used in the business simulation courses as an effective method in entrepreneurship for education among young people, the use of the innovative technologies in the business simulation courses between two levels of education - high school and university. The project had its start in 2014 and the end will be in 2016. By this time some results have already been achieved, which passed through the creation of the project website, the reports of the three meetings already held, the presentation of a new curricula for the business simulation courses and a first draft of the Good Practice Guide "Simulation for entrepreneurship".