Using remote labs to serve different teacher's needs a case study with VISIR and RemotElectLab

Remote Laboratories are an emergent technological and pedagogical tool at all education levels, and their widespread use is an important part of their own improvement and evolution. This paper describes several issues encountered on laboratorial classes, on higher education courses, when using remote laboratories based on PXI systems, either using the VISIR system or an alternate in-house solution. Three main issues are presented and explained, all reported by teachers that gave support to students use of remote laboratories. The first issue deals with the need to allow students to select the actual place where an ammeter is to be inserted on electric circuits, even incorrectly, therefore emulating real world difficulties. The second one deals with problems with timing when several measurements are required at short intervals, as in the discharge cycle of a capacitor. And the last issue deals with the use of a multimeter in DC mode when reading AC values, a use that collides with the lab settings. All scenarios are presented and discussed including the solution found for each case. The conclusion derived from the described work is that the remote laboratories area is an expanding field, where practical use leads to improvement and evolution of the available solutions, requiring a strict cooperation and information sharing between all actors, i.e. developers, teachers and students.

Structuring and moodleing a course: case studies at the polytechnic of Porto - School of engineering

This work presents a comparative study covering four different courses lectured at the Polytechnic of Porto - School of Engineering, in respect to the usage of a particular Learning Management System, i.e. Moodle, and its impact on students' results. Even though positive correlation factors exist, e.g. between the number of Moodle accesses versus the final exam grade obtained by each student, the explanation behind it may not be straightforward. Mapping this particular factor to course numbers reveals that the quality of the resources might be preponderant and not only their quantity. This paper also addresses teachers who used this platform as a complement to their courses (b-learning) and identifies some particular issues they should be aware in order to potentiate students' engagement and learning.

Engaging students by moodleing a course? Case studies at the Polytechnic of Porto–School of Engineering

This work presents a comparative study covering four different courses lectured at the Polytechnic of Porto - School of Engineering, regarding the usage of a particular Learning Management System, i.e. Moodle, and its impact on students' results. This study addresses teachers who used this platform as a complement to their courses (b-learning) and identifies some particular issues in order to potentiate students' engagement and learning. Even though positive correlation factors exist, e.g. between the number of Moodle accesses versus the final exam grade obtained by each student, the explanation behind it may not be straightforward. Mapping this particular factor to course numbers reveals that the quality of the resources might be preponderant and not only their quantity. These results point to the fact that some dynamic resources might enlarge students' engagement.

Aplicação da técnica Análise do Valor (AV) a um determinado porduto/serviço

Mestrado em Engenharia Mecânica - Gestão de Processos e Operações

Comparison of internet usage habits in two generations of higher education students: a case study

Posters

A case study on the eco-efficiency performance of a composite processing industry: evaluation and quantification of potential improvements

In this study, an attempt was made in order to measure and evaluate the eco-efficiency performance of a pultruded composite processing company. For this purpose the recommendations of World Business Council for Sustainable Development (WCSD) and the directives of ISO 14301 standard were followed and applied. The main general indicators of eco-efficiency, as well as the specific indicators, were defined and determined. With basis on indicators’ figures, the value profile, the environmental profile, and the pertinent eco-efficiency ratios were established and analyzed. In order to evaluate potential improvements on company eco-performance, new indicators values and eco-efficiency ratios were estimated taking into account the implementation of new proceedings and procedures, at both upstream and downstream of the production process, namely: i) Adoption of a new heating system for pultrusion die-tool in the manufacturing process, more effective and with minor heat losses; ii) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

Towards e-learning 2.0: case study of an e-learning environment

In these days the learning experience is no longer confined within the four walls of a classroom. Computers and primarily the internet have broadened this horizon by creating a way of delivering education that is known as e-learning. In the meantime, the internet, or more precisely, the Web is heading towards a new paradigm where the user is no longer just a consumer of information and becomes an active part in the communication. This two-way channel where the user takes the role of the producer of content triggered the appearance of new types of services such as Social Networks, Blogs and Wikis. To seize this second generation of communities and services, educational vendors are willing to develop e-learning systems focused on the new and emergent users needs. This paper describes the analysis and specification of an e-learning environment at our School (ESEIG) towards this new Web generation, called PEACE – Project for ESEIG Academic Environment. This new model relies on the integration of several services controlled by teachers and students such as social networks, repositories libraries, e-portfolios and e-conference sytems, intelligent tutors, recommendation systems, automatic evaluators, virtual classrooms and 3D avatars.

Interoperability on e-learning 2.0: the PEACE case study

The confluence of education with the evolution of technology boosted the paradigm shift of the face-to-face learning to distance learning. In this scenario e-Learning plays an essential role as a facilitator of the teaching/learning process. However new demands associated with the new Web paradigm require that existent e-Learning environments characterized mostly by monolithic systems begin interacting with new specialized services. In this decentralized scenario the definition of a strategy of interoperability is the cornerstone to ensure the standardization communication among systems. This paper presents a definition of an interoperability strategy for an e-Learning environment at our School (ESEIG) called PEACE – Project for ESEIG Academic Content Environment. This new interoperability model relies on the application of several coordination and integration standards on several services, controlled by teachers and students, and included in the PEACE environment such as social networks, repositories, libraries, e-portfolios, intelligent tutors, recommendation systems and virtual classrooms.

A qualitative description of soil parameters variation due to a prescribed fire in Portuguese northwestern forests using Fuzzy Boolean Nets — The case study of Cabreira mountain

In this paper we study the modifications that occurred in some forest soil properties after a prescribed fire. The research focused on the alterations of soil pH, soil moisture and soil organic matter content during a two-year span, from 2008 to 2009. The study site is located in Anjos, Vieira do Minho municipality, a forest site that has suffered from recurrent wildfires for several decades. Furze (Ulex, sp.), broom (Cytisus, sp.), gorse (Chamaespartum tridentatum) and a very few disperse adult pine (Pinus sylvestris) are the predominant vegetation type in the study area. The average height of this shrub vegetation is around 1.5 m. The prescribed fire was conducted by the National Forestry Authority (AFN) in November 2008. Fuzzy Boolean Nets (FBN) were used to evaluate the alteration in soil parameters when compared with adjacent spots where: i) no fire occurrence was registered since 1998; ii) fire occurrence was registered in 2008; and iii) vegetation pruning by mechanical cut was done in Spring six months prior to the prescribed fire event. Results suggest that in the particular case of the studied site, Anjos, the observed soil properties alterations cannot be related with the prescribed fire.

A case study on the improvement of eco-efficiency ratios: application to a composite processing industry

The World Business Council for Sustainable Development (WBCSD) defines Eco-Efficiency as follows: ‘Eco- Efficiency is achieved by the delivery of competitively priced-goods and services that satisfy human needs and bring quality of life, while progressively reducing ecological impacts and resource intensity throughout the life-cycle to a level at least in line with the earth’s estimated carrying capacity’. Eco-Efficiency is under this point of view a key concept for sustainable development, bringing together economic and ecological progress. Measuring the Eco-Efficiency of a company, factory or business, is a complex process that involves the measurement and control of several and relevant parameters or indicators, globally applied to all companies in general, or specific according to the nature and specificities of the business itself. In this study, an attempt was made in order to measure and evaluate the eco-efficiency of a pultruded composite processing company. For this purpose the recommendations of WBCSD [1] and the directives of ISO 14301 standard [2] were followed and applied. The analysis was restricted to the main business branch of the company: the production and sale of standard GFRP pultrusion profiles. The main general indicators of eco-efficiency, as well as the specific indicators, were defined and determined according to ISO 14031 recommendations. With basis on indicators’ figures, the value profile, the environmental profile, and the pertinent eco-efficiency’s ratios were established and analyzed. In order to evaluate potential improvements on company eco-performance, new indicators values and ecoefficiency ratios were estimated taking into account the implementation of new proceedings and procedures, both in upstream and downstream of the production process, namely: a) Adoption of new heating system for pultrusion die in the manufacturing process, more effective and with minor heat losses; b) Implementation of new software for stock management (raw materials and final products) that minimize production failures and delivery delays to final consumer; c) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. In particular, the last approach seems to significantly improve the eco-efficient performance of the company. Currently, by-products and wastes generated in the manufacturing process of GFRP profiles are landfilled, with supplementary added costs to this company traduced by transport of scrap, landfill taxes and required test analysis to waste materials. However, mechanical recycling of GFRP waste materials, with reduction to powdered and fibrous particulates, constitutes a recycling process that can be easily attained on heavy-duty cutting mills. The posterior reuse of obtained recyclates, either into a close-looping process, as filler replacement of resin matrix of GFRP profiles, or as reinforcement of other composite materials produced by the company, will drive to both costs reduction in raw materials and landfill process, and minimization of waste landfill. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

Performance management in a family business: a case study

This research, still at an early stage, and then presented in a poster format, intended to explain the management of organizational performance of a family business in the succession process using the case study method. The scripts for semi-structured interviews that will apply to managers, owners and other workers who are deemed suitable for the investigation, which include relatives of the owners of the company are being developed. For this work the model of organizational performance management developed by David Otley in 1999 [1], consisting of five questions that seek to explain the existing performance management in any organization is utilized.

A contabilidade de gestão nas autarquias locais: o caso do Município de Espinho

Trabalho de Projeto apresentado ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Auditoria Orientação: Doutora Alcina Augusta de Sena Portugal Dias Coorientação: Doutora Amélia Cristina Ferreira Silva

Tech-based Innovations in pedagogical practices: the case of ISCAP

TICEduca. III Congresso Internacional TIC e Educação. 14 a 16 Novembro, Lisboa

O uso das redes sociais no recrutamento externo em empresas portuguesas

Este estudo tem como objetivo explorar o papel das redes sociais nos processos de recrutamento das organizações portuguesas. Em específico, procura identificar os motivos que levam as organizações a recrutar através da internet e dos meios on-line ao dispor, nomedamente através das Redes Socais na Internet (RSIs), as vantagens e desvantagens da sua utilização comparativamente com os métodos tradicionais. Para a realização do estudo foram selecionadas 5 empresas portuguesas que utilizam as redes sociais on-line para divulgar as suas ofertas de emprego, atrair e recrutar talentos. Foi utilizada a metodologia qualitativa, optando-se pelo estudo caso múltiplo e exploratório. O instrumento de recolha de informação foi a entrevista semiestruturada. Integraram este estudo 5 empresas de distintas áreas de negócio e com a sua sede no distrito do Porto. No total, foram realizadas 5 entrevistas, uma a cada responsável pelos recursos humanos ou recrutamento das empresas em estudo. Um desses responsáveis é, simultaneamente, o gerente da empresa. Os resultados sugerem que as empresas portuguesas, de forma gradual, começam a aceder cada vez mais às redes sociais para apoiar os seus processos de recrutamento. No entanto, essa técnica de recrutamento ainda não é utilizada de forma isolada nem substitui os métodos tradicionais de recrutamento. Na parte final da dissertação são discutidos os principais resultados obtidos e apresentadas as conclusões do estudo aqui levado a cabo.

Perspectives of the Internal Public in a Cultural Event: the Case of Noc Noc, Guimarães - Portugal

Given the significant impact that cultural events may have in local communities and the inherent organization complexity, it is important to understand their specificities. Most of the times cultural events disregard marketing and often marketing is distant from art. Thus an analysis of an inside perspective might bring significant returns to the organization of such an event. This paper considers the three editions (2011, 2012 and 2013) of a cultural event – Noc Noc – organized by a local association in the city of Guimarães, Portugal. Its format is based in analogous events, as Noc Noc intends to convert everyday spaces (homes, commercial outlets and a number of other buildings) into cultural spaces, processed and transformed by artists, hosts and audiences. By interviewing a sample of people (20) who have hosted this cultural event, sometimes doubling as artists, and by experiencing the three editions of the event, this paper illustrates how the internal public understands this particular cultural event, analyzing specifically their motivations, ways of acting and participating, as well as their relationship with the public, with the organization of the event and with art in general. Results support that artists and hosts motivations must be identified in a timely and appropriate moment, as well as their views of this particular cultural event, in order to keep them participating, since low budget cultural events such as this one may have a key role in small scale cities.