Using Baseline Methods to Identify Non-technical Losses in the Context of Smart Grids

Demand response has gained increasing importance in the context of competitive electricity markets and smart grid environments. In addition to the importance that has been given to the development of business models for integrating demand response, several methods have been developed to evaluate the consumers’ performance after the participation in a demand response event. The present paper uses those performance evaluation methods, namely customer baseline load calculation methods, to determine the expected consumption in each period of the consumer historic data. In the cases in which there is a certain difference between the actual consumption and the estimated consumption, the consumer is identified as a potential cause of non-technical losses. A case study demonstrates the application of the proposed method to real consumption data.

Consumers Performance Evaluation of the Participation in Demand Response Programs Using Baseline Methods

Demand response has gain increasing importance in the context of competitive electricity markets environment. The use of demand resources is also advantageous in the context of smart grid operation. In addition to the need of new business models for integrating demand response, adequate methods are necessary for an accurate determination of the consumers’ performance evaluation after the participation in a demand response event. The present paper makes a comparison between some of the existing baseline methods related to the consumers’ performance evaluation, comparing the results obtained with these methods and also with a method proposed by the authors of the paper. A case study demonstrates the application of the referred methods to real consumption data belonging to a consumer connected to a distribution network.

Analysis of Consumption Data to Detect Commercial Losses Using Performance Evaluation Methods in a Smart Grid

Electric power networks, namely distribution networks, have been suffering several changes during the last years due to changes in the power systems operation, towards the implementation of smart grids. Several approaches to the operation of the resources have been introduced, as the case of demand response, making use of the new capabilities of the smart grids. In the initial levels of the smart grids implementation reduced amounts of data are generated, namely consumption data. The methodology proposed in the present paper makes use of demand response consumers’ performance evaluation methods to determine the expected consumption for a given consumer. Then, potential commercial losses are identified using monthly historic consumption data. Real consumption data is used in the case study to demonstrate the application of the proposed method.

Comparison of different methods for work accidents investigation in hospitals: A Portuguese case study

BACKGROUND: The hospital environment has many occupational health risks that predispose healthcare workers to various kinds of work accidents. OBJECTIVE: This study aims to compare different methods for work accidents investigation and to verify their suitability in hospital environment. METHODS: For this purpose, we selected three types of accidents that were related with needle stick, worker fall and inadequate effort/movement during the mobilization of patients. A total of thirty accidents were analysed with six different work accidents investigation methods. RESULTS: The results showed that organizational factors were the group of causes which had the greatest impact in the three types of work accidents. CONCLUSIONS: The methods selected to be compared in this paper are applicable and appropriate for the work accidents investigation in hospitals. However, the Registration, Research and Analysis of Work Accidents method (RIAAT) showed to be an optimal technique to use in this context.

Emerging (Bio)Sensing Technology for Assessing and Monitoring Freshwater Contamination – Methods and Applications

Ecological Water Quality - Water Treatment and Reuse

Assessing and comparing the total antioxidant capacity of commercial beverages: application to beers, wines, waters and soft drinks using TRAP, TEAC and FRAP methods.

This work measures and tries to compare the Antioxidant Capacity (AC) of 50 commercial beverages of different kinds: 6 wines, 12 beers, 18 soft drinks and 14 flavoured waters. Because there is no reference procedure established for this purpose, three different optical methods were used to analyse these samples: Total Radical trapping Antioxidant Parameter (TRAP), Trolox Equivalent Antioxidant Capacity (TEAC) and Ferric ion Reducing Antioxidant Parameter (FRAP). These methods differ on the chemical background and nature of redox system. The TRAP method involves the transfer of hydrogen atoms while TEAC and FRAP involves electron transfer reactions. The AC was also assessed against three antioxidants of reference, Ascorbic acid (AA), Gallic acid (GA) and 6-hydroxy-2,5,7,8-tetramethyl- 2-carboxylic acid (Trolox). The results obtained were analyzed statistically. Anova one-way tests were applied to all results and suggested that methods and standards exhibited significant statistical differences. The possible effect of sample features in the AC, such as gas, flavours, food colouring, sweeteners, acidity regulators, preservatives, stabilizers, vitamins, juice percentage, alcohol percentage, antioxidants and the colour was also investigated. The AC levels seemed to change with brand, kind of antioxidants added, and kind of flavour, depending on the sample. In general, higher ACs were obtained for FRAP as method, and beer for kind of sample, and the standard expressing the smaller AC values was GA.

Combining sparse and dense methods in 6D Visual Odometry

13th International Conference on Autonomous Robot Systems (Robotica), 2013, Lisboa

Reliability of Two Methods for Identifying the Postural Phase of Gait Initiation in Healthy and Post-stroke Subjects

This study aims to compare two methods of assessing the postural phase of gait initiation as to intrasession reliability, in healthy and post-stroke subjects. As a secondary aim, this study aims to analyse anticipatory postural adjustments during gait initiation based on the centre of pressure (CoP) displacements in post-stroke participants. The CoP signal was acquired during gait initiation in fifteen post-stroke subjects and twenty-three healthy controls. Postural phase was identified through a baseline-based method and a maximal displacement based method. In both healthy and post-stroke participants higher intra-class correlation coefficient and lower coefficient of variation values were obtained with the baseline-based method when compared to the maximal displacement based method. Post-stroke participants presented decreased CoP displacement backward and toward the first swing limb compared to controls when the baseline-based method was used. With the maximal displacement based method, there were differences between groups only regarding backward CoP displacement. Postural phase duration in medial-lateral direction was also increased in post-stroke participants when using the maximal displacement based method. The findings obtained indicate that the baseline-based method is more reliable detecting the onset of gait initiation in both groups, while the maximal displacement based method presents greater sensitivity for post-stroke participants.

O financiamento nas cooperativas

As cooperativas, enquanto entidades pertencentes ao setor da economia social, são organizações com características próprias e distintas das sociedades comerciais, destacando-se o seu escopo mutualístico e o caráter variável do seu capital social, por confronto com o escopo lucrativo e o princípio da conservação do capital social que caraterizam as sociedades. Estas especificidades das cooperativas condicionam a obtenção de meios de financiamento por parte destas. Em virtude do seu caráter variável, o capital social não representa uma garantia para os credores, pelo que serão as reservas, designadamente as reservas obrigatórias, que se apresentarão como o recurso financeiro de melhor qualidade na cooperativa. Nas cooperativas são identificáveis outros instrumentos financeiros, tais como: títulos de investimento e obrigações, os resultados provenientes das operações com terceiros, que são obrigatoriamente afetados a reservas irrepartíveis, os excedentes, os membros investidores, subsídios e benefícios fiscais. Para além da identificação das principais fontes de financiamento, foi ainda objeto de estudo repensar os instrumentos existentes e, eventualmente, a criação de novos instrumentos de financiamento nas cooperativas. Em termos metodológicos, a opção recaiu na conjugação de dois métodos: quantitativo e qualitativo. A técnica da investigação quantitativa selecionada para a recolha de dados, foi a base de dados, e para a investigação qualitativa as técnicas escolhidas foram a análise de conteúdo, a entrevista e o registo áudio. Os resultados da investigação confirmam a indispensabilidade de criação de novos instrumentos de financiamento para as cooperativas. Constatou-se a necessidade de modelos de financiamento que se adaptem à finalidade mutualista da cooperativa. Demonstrou-se que a principal fonte de financiamento são os recursos internos, sob forma de reservas.

Recrutamento e seleção de pessoas: a perceção dos avaliadores

Gerir os recursos humanos implica deter uma visão estratégica, previsional e provisional. Hoje em dia, a avaliação dos recursos humanos é uma constante nas empresas de consultoria, pelo que o presente estudo tem como principal objetivo analisar e compreender a perceção dos avaliadores relativamente aos Processos de Recrutamento e Seleção. Participaram no presente estudo 12 avaliadores de empresas de consultoria de Portugal, de ambos os sexos, com uma média etária de 36 anos (DP=7.98). Foi administrado um inquérito por questionário para recolha de dados demográficos e elaborado um guião de entrevista com 13 questões. Os dados foram tratados através da análise de conteúdo, a partir da qual foi possível identificar-se categorias e subcategorias das respostas concedidas. Os principais resultados mostraram que, globalmente, os avaliadores possuem uma perceção positiva da sua atividade. O recrutamento online/pela internet é identificado como fonte de excelência para atrair candidatos e a entrevista é a técnica de avaliação utilizada pelos avaliadores, com especial enfoque nas entrevistas por competências com orientação semidiretiva. O processo de avaliação valoriza as soft skills, sendo que os avaliadores detêm um grau de confiança relativamente grande nas metodologias de avaliação que utilizam. A motivação dos avaliadores no desempenho da sua função radica, essencialmente na abrangência de conhecimentos que reveste a função e a possibilidade que esta confere de desenvolvimento. Estudos futuros devem ser realizados com amostras mais abrangentes, integrando metodologias quantitativas e qualitativas e com empresas onde a área de Recrutamento e Seleção seja desenvolvida internamente.