MV producers and consumers agents characterization with DSM techniques

This paper consist in the establishment of a Virtual Producer/Consumer Agent (VPCA) in order to optimize the integrated management of distributed energy resources and to improve and control Demand Side Management DSM) and its aggregated loads. The paper presents the VPCA architecture and the proposed function-based organization to be used in order to coordinate the several generation technologies, the different load types and storage systems. This VPCA organization uses a frame work based on data mining techniques to characterize the costumers. The paper includes results of several experimental tests cases, using real data and taking into account electricity generation resources as well as consumption data.

Lidar com o sofrimento em Fisioterapia: a experiência formativa na ESTSP-IPP

A comunicação e a relação terapêutica são reconhecidamente domínios de competência dos profissionais de saúde cujas funções impliquem o contacto com doentes (Corney, 2000; Grilo & Pedro, 2005; Pio Abreu, 1998). Além do seu papel determinante na adesão terapêutica, a qualidade da comunicação e da relação terapêutica estabelecida tem particular impacto no sofrimento da pessoa, tomado como constructo multidimensional (McIntyre, 2004). Tradicionalmente descurados na formação académica, estes temas tendem actualmente a ganhar expressão nos currículos, para o que contribuíram, no espaço europeu, as recomendações para a adequação a Bolonha (Lopes, 2004). Neste trabalho, descrevemos a metodologia de formação adoptada para estes domínios na licenciatura em Fisioterapia da ESTSP-IPP, a funcionar segundo o modelo pedagógico designado Problem-Based Learning (Walsh, 2005; Macedo, 2009). Além dos conhecimentos disseminados ao longo de toda a estrutura curricular, temas como a comunicação (Watzlawick, Bavelas & Jackson, 1967/1993), a escuta activa (Gordon & Edwards, 1997), a relação terapêutica (Rogers, 1957/1992, 1980, 1985), as competências e microcompetências/técnicas de atendimento e de observação (Ivey, 1983; Ivey & Downing, 1990; Ivey, Gluckstern & Ivey, 2006) ou as comunicações difíceis (Faulkner, Maguire & Regnard, 1994; Maguire, 2000) são alvo de formação mais intensiva ao longo de cerca de 16 semanas consecutivas do 1º ciclo de estudos, com recurso a diferentes tipologias de aula visando desenvolver, além dos conhecimentos, atitudes e habilidades nestes domínios.

Diagnóstico de higiene e segurança no trabalho: proposta de medidas correctivas

O trabalho que é de seguida apresentado foi desenvolvido durante o estágio efectuado no Instituto de Desenvolvimento e Inovação Tecnológica (IDIT), tendo em vista a realização de um projecto de fim de Mestrado em Engenharia Química no ramo de Tecnologias de Protecção Ambiental. O projecto teve como principal objectivo a elaboração de um diagnóstico de Segurança, Higiene e Saúde no Trabalho tendo por base as medições de factores de riscos, efectuadas numa empresa pertencente ao sector da alimentação, e o seu respectivo enquadramento legal. A realização deste trabalho consistiu na avaliação de factores físicos e químicos presentes em todas as actividades industriais, que podem constituir riscos para a higiene, saúde e segurança dos trabalhadores. Os factores considerados neste estudo foram: o ruído, a iluminância, as vibrações, o ambiente térmico e os contaminantes químicos. Ao longo do trabalho são apresentados os resultados obtidos nas avaliações efectuadas e a sua análise, que permitiu o conhecimento das condições de trabalho, para as diversas actividades desempenhadas na empresa, revelando as não concordâncias dos factores estudados. Segundo os resultados obtidos conclui-se que a empresa apresenta condições de Higiene, Saúde e Segurança bastantes satisfatórias, apresentando apenas algumas não conformidades, particularmente nos níveis de pressão sonora. No entanto, estas não conformidades podem ser contornadas com a aplicação de medidas correctivas previstas no enquadramento legal que abrange cada factor avaliado. A escassez de tempo não permitiu a elaboração de um diagnóstico de HST completo, uma vez que, uma análise de risco completa necessita de um estudo mais aprofundado na área e uma prática considerável, que não foi possível adquirir até então.

TimeMesh – a serious game for european citizenship

Serious games are games where the entertainment aspect is not the most relevant motivation or objective. TimeMesh is an online, multi-language, multiplayer, collaborative and social game platform for sharing and acquiring knowledge of the history of European regions. As such it is a serious game with educational characteristics. This article evaluates the use of TimeMesh with students of 13 and 14 years-old. It shows that this game is already a significant learning tool about European citizenship.

"Poster yourself": a construção colaborativa e multimédia do conhecimento no Ensino Precoce de Inglês

Mestrado em Ensino Precoce do Inglês

VISIR deployment in undergraduate engineering practices

Practical sessions are the backbone of qualification in engineering education. It leads to a better understanding and allows mastering scientific concepts and theories. The lack of the availability of practical sessions at many universities and institutions owing to the cost and the unavailability of instructors the most of the time caused a significant decline in experimentation in engineering education over the last decades. Recently, with the progress of computer-based learning, remote laboratories have been proven to be the best alternative to the traditional ones, regarding to its low cost and ubiquity. Some universities have already started to deploy remote labs in their practical sessions. This contribution compiles diverse experiences based on the deployment of the remote laboratory, Virtual Instrument Systems in Reality (VISIR), on the practices of undergraduate engineering grades at various universities within the VISIR community. It aims to show the impact of its usage on engineering education concerning the assessments of students and teachers as well.

Caracterización y determinación del proceso para la producción de cal comercial a partir de la piedra caliza

La cal es un material producido a partir de la calcinación de la roca caliza y tiene diversas utilidades en el mundo de la industria como la siderúrgica, papelera, alimentaria, en la construcción, entre otras. Es fundamental conocer todas las características de la caliza para poder determinar su grado de calcinación. Con el presente trabajo se pretende estudiar las propiedades de la caliza para su posterior calcinación y el dimensionamiento de una planta de producción de cal desde que el mineral llega de la explotación hasta que sale al mercado. Para determinar los equipos se calcularon sus dimensiones para una producción de 600 t/h de cal, sabiendo que la planta principal de machaqueo solo trabajará 5 días de la semana en jornadas de 8 horas, mientras que a partir del horno de calcinación estará en funcionamiento los 7 días de la semana, 24 horas al día. A partir de esas consideraciones se obtienen las dimensiones de todos los equipos y se realiza un estudio para la elección de un horno, o un horno de eje vertical y un horno rotativo, así como el combustible empleado, ya que es una parte fundamental para determinar los costes para la producción de cal. También fue objeto de este trabajo, el estudio ambiental de la instalación de la planta, en función de la mezcla de combustible empleada y del impacto en el entorno de la misma, así como un estudio de viabilidad de la planta, estimando unos costes de la misma y un precio de mercado “ex‐Works”.

The European Project Semester at ISEP: the challenge of educating global engineers

Current engineering education challenges require approaches that promote scientific, technical, design and complementary skills while fostering autonomy, innovation and responsibility. The European Project Semester (EPS) at Instituto Superior de Engenharia do Porto (ISEP) (EPS@ISEP) is a one semester project-based learning programme (30 European Credit Transfer Units (ECTU)) for engineering students from diverse scientific backgrounds and nationalities that intends to address these goals. The students, organised in multidisciplinary and multicultural teams, are challenged to solve real multidisciplinary problems during one semester. The EPS package, although on project development (20 ECTU), includes a series of complementary seminars aimed at fostering soft, project-related and engineering transversal skills (10 ECTU). Hence, the students enrolled in this programme improve their transversal skills and learn, together and with the team of supervisors, subjects distinct from their core training. This paper presents the structure, implementation and results of the EPS@ISEP that was created in 2011 to apply the best engineering practices and promote internationalisation and engineering education innovation at ISEP.

Nunca mais é sexta-feira: o impacto do processo de recuperação de recursos durante o fim de semana no engagement

Orientação: Doutora Maria Alexandra Pacheco Ribeiro da Costa

A influência do modelo pedagógico em variáveis psicológicas de estudantes do 1º ano da ESTSP-IPP

Introdução – A adaptação ao ensino superior reveste-se de experiências académicas que podem constituir fonte de stress para os estudantes. A implementação de novos modelos pedagógicos, no âmbito do processo de Bolonha, introduz novas variáveis cujo impacto, designadamente em termos de saúde, importa conhecer. Este estudo tem como objetivo analisar as associações entre modelo pedagógico (Problem Based Learning – PBL vs. modelos próximos do tradicional) e variáveis psicológicas (coping, desregulação emocional, sintomas psicossomáticos, perceção de stress e afeto). Metodologia – O estudo tem um design transversal. Foram usados os seguintes questionários online: Brief-COPE, Escala de Dificuldades de Regulação Emocional, Questionário de Manifestações Físicas de Mal-Estar, Escala de Stress Percebido e Escala de Afeto Positivo e Negativo. A amostra é constituída por 183 estudantes do primeiro ano (84% do género feminino) de cursos da Escola Superior de Tecnologia da Saúde do Porto – Instituto Politécnico do Porto (ESTSP-IPP). Resultados – Foram encontradas correlações significativas entre as variáveis demográficas e psicológicas. Considerando diferentes modelos pedagógicos, foram encontradas diferenças significativas nas variáveis psicológicas. Os principais preditores de stress na amostra foram: ser mulher, frequentar uma licenciatura no modelo PBL, ter maiores índices de desregulação emocional, apresentar mais sintomas psicossomáticos, menos afeto positivo e mais afeto negativo. Conclusão – As diferenças encontradas entre modelos pedagógicos são discutidas, possibilitando a reflexão sobre as implicações práticas e sugestões para futuras investigações.

CDIO and the European Project Semester: a match for capstone projects?

The CDIO Initiative is an open innovative educational framework for engineering graduation degrees set in the context of Conceiving – Designing – Implementing – Operating real-world systems and products, which is embraced by a network of worldwide universities, the CDIO collaborators. A CDIO compliant engineering degree programme typically includes a capstone module on the final semester. Its purpose is to expose students to problems of a greater dimension and complexity than those faced throughout the degree programme as well as to put them in contact with the so-called real world, in opposition to the academic world. However, even in the CDIO context, there are barriers that separate engineering capstone students from the real world context of an engineering professional: (i) limited interaction with experts from diverse scientific areas; (ii) reduced cultural and scientific diversity within the teams; and (iii) lack of a project supportive framework to foster the complementary technical and non-technical skills required in an engineering professional. To address these shortcomings, we propose the adoption of the European Project Semester (EPS) framework, a one semester student centred international capstone programme offered by a group of European engineering schools (the EPS Providers) as part of their student exchange programme portfolio. The EPS package is organised around a central module – the EPS project – and a set of complementary supportive modules. Project proposals refer to open multidisciplinary real world problems and supervision becomes coaching. The students are organised in teams, grouping individuals from diverse academic backgrounds and nationalities, and each team is fully responsible for conducting its project. EPS complies with the CDIO directives on Design-Implement experiences and provides an integrated framework for undertaking capstone projects, which is focussed on multicultural and multidisciplinary teamwork, problem-solving, communication, creativity, leadership, entrepreneurship, ethical reasoning and global contextual analysis. As a result, we recommend the adoption of the EPS within CDIO capstone modules for the benefit of engineering students.

Development of Biomimetic Robots in the EPS Engineering Programme Capstone Project

This paper proposes the development of biologically inspired robots as the capstone project of the European Project Semester (EPS) framework. EPS is a one semester student centred international programme offered by a group of European engineering schools (EPS Providers) as part of their student exchange programme portfolio. EPS is organized around a central module (the EPS project) and a set of complementary supportive modules. Project proposals refer to open multidisciplinary real world problems. Its purpose is to expose students to problems of a greater dimension and complexity than those faced throughout the degree programme as well as to put them in contact with the socalled real world, in opposition to the academic world. Students are organized in teams, grouping individuals from diverse academic backgrounds and nationalities, and each team is fully responsible for conducting its project. EPS provides an integrated framework for undertaking capstone projects, which is focused on multicultural and multidisciplinary teamwork, communication, problem-solving, creativity, leadership, entrepreneurship, ethical reasoning and global contextual analysis. The design and development of biologically inspired robots allows the students to fulfil the previously described requirements and objectives and, as a result, we recommend the adoption of these projects within the EPS project capstone module for the benefit of engineering students.

Development of Biomimetic Robots in the EPS Engineering Programme Capstone Project

This paper presents the development of a fish-like robot called Bro-Fish. Bro-Fish aims to be an educational toy dedicated to teaching mechanics, programming and the physics of floating objects to youngsters. The underlying intention is to awaken the interest of children for technology, especially biomimetic (biologically inspired) approaches, in order to promote sustainability and raise the level of ecological awareness. The main focus of this project was to create a robot with carangiform locomotion and controllable swimming, providing the opportunity to customize parts and experiment with the physics of floating objects. Therefore, the locomotion principles of fishes and mechanisms developed in related projects were analysed. Inspired by this background knowledge, a prototype was designed and implemented. The main achievement is the new tail mechanism that propels the robot. The tail resembles the undulation motion of fish bodies and is actuated in an innovative way, triggered by an elegant movement of a rotating helicoidal. First experimental tests revealed the potential of the proposed methodology to effectively generate forward propulsion.

Ensemble: an innovative approach to practice computer programming

Currently, the teaching-learning process in domains, such as computer programming, is characterized by an extensive curricula and a high enrolment of students. This poses a great workload for faculty and teaching assistants responsible for the creation, delivery, and assessment of student exercises. The main goal of this chapter is to foster practice-based learning in complex domains. This objective is attained with an e-learning framework—called Ensemble—as a conceptual tool to organize and facilitate technical interoperability among services. The Ensemble framework is used on a specific domain: computer programming. Content issues are tacked with a standard format to describe programming exercises as learning objects. Communication is achieved with the extension of existing specifications for the interoperation with several systems typically found in an e-learning environment. In order to evaluate the acceptability of the proposed solution, an Ensemble instance was validated on a classroom experiment with encouraging results.

Caracterización y determinación del proceso para la producción de cal comercial a partir de la piedra caliza

La cal es un material producido a partir de la calcinación de la roca caliza y tiene diversas utilidades en el mundo de la industria como la siderúrgica, papelera, alimentaria, en la construcción, entre otras. Es fundamental conocer todas las características de la caliza para poder determinar su grado de calcinación. Con el presente trabajo se pretende estudiar las propriedades de la caliza para su posterior calcinación y el dimensionamento de una planta de producción de cal desde que el mineral llega de la explotación hasta que sale al mercado.Para determinar los equipos se calularon sus dimensiones para una producción de 600 t/h de cal, sabiendo que la planta principal de machaquero solo trabajará 5 días de la semana en jornadas de 8 horas, mientras que a partir del horno de calcinación estará en funcionamento los 7 dias de la semana, 24 horas al día. A partir de esas consideraciones se obtienen las dimensiones de todos los equipos y se realiza un estudio para la elección de un horno, o un horno de eje vertical y un horno rotativo, así como el combustible empleado, ya que es una parte fundamental para determinar los costes para la producción de cal.Tmbién fue objeto de este trabajo, el estudio ambiental de la instalación de la planta, en función de la mezcla de combustible empleada y del impacto en el entorno de la lisma, así como un estudio de viabilidad de la planta, estimando unos costes de la misma y un precio de mercado "ex Works".