From design-for-test to design-for-debug-and-test: analysis of requirements and limitations for 1149.1

The increasing complexity of VLSI circuits and the reduced accessibility of modern packaging and mounting technologies restrict the usefulness of conventional in-circuit debugging tools, such as in-circuit emulators for microprocessors and microcontrollers. However, this same trend enables the development of more complex products, which in turn require more powerful debugging tools. These conflicting demands could be met if the standard scan test infrastructures now common in most complex components were able to match the debugging requirements of design verification and prototype validation. This paper analyses the main debug requirements in the design of microprocessor-based applications and the feasibility of their implementation using the mandatory, optional and additional operating modes of the standard IEEE 1149.1 test infrastructure.

Mode III interlaminar fracture of carbon/epoxy laminates using the edge crack torsion (ECT) test

The mode III interlaminar fracture of carbon/epoxy laminates was evaluated with the edge crack torsion (ECT) test. Three-dimensional finite element analyses were performed in order to select two specimen geometries and an experimental data reduction scheme. Test results showed considerable non-linearity before the maximum load point and a significant R-curve effect. These features prevented an accurate definition of the initiation point. Nevertheless, analyses of non-linearity zones showed two likely initiation points corresponding to GIIIc values between 850 and 1100 J/m2 for both specimen geometries. Although any of these values is realistic, the range is too broad, thus showing the limitations of the ECT test and the need for further research.

Desenvolvimento de ferramentas e provetes para o ensaio Thick Adherend Shear Test (TAST).

As estruturas coladas são geralmente projetadas para que o adesivo seja essencialmente sujeito a esforços de corte, pois neste tipo de solicitação o adesivo apresenta melhores caraterísticas mecânicas. A avaliação do comportamento ao corte pode ser realizada com o adesivo no estado maciço ou como camada fina em juntas adesivas. Os métodos que permitem avaliar o comportamento ao corte, quer para o adesivo, quer para as juntas, são: o ensaio Iosipescu ou V-Notched beam shear method, o ensaio de borboleta ou Notched plate shear method (Arcan), o ensaio de torsão, o ensaio de tração numa junta de sobreposição simples e o ensaio Thick Adherend Shear Test (TAST). Os ensaios Arcan e Iosipescu, tal como o ensaio de torção, podem ser realizados em provetes de adesivo maciço ou em juntas. O ensaio de torção é pouco utilizado, porque a aplicação do esforço de corte exige dispositivos e equipamentos de ensaios complexos. Os ensaios Arcan e Iosipescu utilizam provetes com entalhes e podem introduzir alguma dificuldade na medição precisa das deformações. O ensaio de tração numa junta de sobreposição simples é um dos métodos mais usados para caraterizar uma junta adesiva, porque é um método simples, as juntas são de fácil fabrico e pode ser realizado em máquinas universais de ensaios mecânicos. Neste ensaio os aderentes estão sujeitos a uma solicitação de tração, enquanto a camada de adesivo está sujeita a esforços de corte combinados com esforços de arrancamento. Os esforços de arrancamento resultam da própria geometria da junta na qual existe um desalinhamento das forças de tração, mesmo quando são colocados calços (reguladores de espessura) nos locais de amarração. O ensaio TAST é dos mais populares para obtenção das propriedades ao corte, uma vez que tanto as ferramentas de ensaio como o fabrico dos provetes são relativamente simples. Este ensaio é realizado em junta sendo os substratos espessos e de aço que, devido à sua elevada rigidez, contribuem para um esforço de corte praticamente puro no adesivo. Neste trabalho realizou-se o projeto e a fabricação das ferramentas, gabarit e substratos necessários para a execução de provetes TAST e ensaios utilizando diferentes adesivos.

PHYSQuiz - Aplicação computacional para formação contínua em Física Radiológica

Mestrado em Engenharia de Computação e Instrumentação Médica

Analysis of the Respiratory Dynamics During Normal Breathing by Means of Pseudophase Plots and Pressure–Volume Loops

This paper reports on the analysis of tidal breathing patterns measured during noninvasive forced oscillation lung function tests in six individual groups. The three adult groups were healthy, with prediagnosed chronic obstructive pulmonary disease, and with prediagnosed kyphoscoliosis, respectively. The three children groups were healthy, with prediagnosed asthma, and with prediagnosed cystic fibrosis, respectively. The analysis is applied to the pressure-volume curves and the pseudophase-plane loop by means of the box-counting method, which gives a measure of the area within each loop. The objective was to verify if there exists a link between the area of the loops, power-law patterns, and alterations in the respiratory structure with disease. We obtained statistically significant variations between the data sets corresponding to the six groups of patients, showing also the existence of power-law patterns. Our findings support the idea that the respiratory system changes with disease in terms of airway geometry and tissue parameters, leading, in turn, to variations in the fractal dimension of the respiratory tree and its dynamics.

Virtual Communities of Practice: Design and Development of Support Platforms and Participation Fostering

Mestrado em Engenharia Informática - Área de Especialização em Sistemas Gráficos e Multimédia

Desempenho Manual do Membro Superior Ipsilesional em Indivíduos com Acidente Vascular Encefálico

Introdução: nos pacientes que sofreram um Acidente Vascular Encefálico são incididos programas de reabilitação que visam principalmente o hemicorpo contralesional, negligenciando o lado ipsilesional. Porém, estão descritas alterações sensitivas e motoras do membro superior ipsilesional neste grupo populacional. Objetivo: avaliar os défices de sensibilidade, destreza grossa e fina e força de preensão da mão ipsilesional em indivíduos com diagnóstico de Acidente Vascular Encefálico, comparando o sexo, o hemisfério cerebral onde se localiza a lesão, a fase aguda e crónica, tendo como referência um grupo controlo. Metodologia: este estudo observacional de carácter analítico transversal foi constituído por 34 indivíduos em que 18 deles tem diagnóstico de Acidente Vascular Encefálico e 16 sem défices neurológicos. A avaliação foi iniciada com um questionário para recolha de informações dos participantes e de seguida foram aplicados instrumentos de avaliação num só momento com o mesmo examinador. Para avaliar a sensibilidade foi usado o Moving Touch-Pressure Test, para a força o Dinamómetro Baseline®, na avaliação da destreza grossa o Teste Caixa e Blocos e por fim a destreza fina com o Purdue Pegboard Test. Estatisticamente recorreu-se ao teste T-student para amostras independentes com nível de significância de 0,05. Resultados: verificou-se que o membro superior ipsilesional dos indivíduos que sofreram um AVE apresenta um défice na força de preensão manual com nível se significância de p=0,001, e de p=0,000 para a destreza fina e grossa e sensibilidade, quando comparados com um grupo controlo. Constatou-se também que no grupo de indivíduos com diagnóstico de Acidente Vascular Encefálico, o sexo masculino obteve melhores resultados em todos os parâmetros avaliados. Observou-se ainda que tanto os homens como as mulheres após sofrerem um Acidente Vascular Encefálico apresentam défices funcionais na mão ipsilesional, mas no entanto os homens apresentam apenas alterações na destreza grossa (p=0,017) e na força (p=0,001). Na comparação dos hemisférios cerebrais lesados e das fases aguda e crónica do AVE verificou-se que não houve diferenças significativas. Conclusão: Existem défices no membro superior ipsilesional após Acidente Vascular Encefálico, sendo então pertinente a sua inclusão em programas de reabilitação, podendo assim melhorar a qualidade de vida dos indivíduos com esta patologia.

Multi-Agent Based Smart Grid Management and Simulation: Situation Awareness and Learning in a Test Bed with Simulated and Real Installations and Players

The rising usage of distributed energy resources has been creating several problems in power systems operation. Virtual Power Players arise as a solution for the management of such resources. Additionally, approaching the main network as a series of subsystems gives birth to the concepts of smart grid and micro grid. Simulation, particularly based on multi-agent technology is suitable to model all these new and evolving concepts. MASGriP (Multi-Agent Smart Grid simulation Platform) is a system that was developed to allow deep studies of the mentioned concepts. This paper focuses on a laboratorial test bed which represents a house managed by a MASGriP player. This player is able to control a real installation, responding to requests sent by the system operators and reacting to observed events depending on the context.

Actividades funcionais assistidas com EEF na reabilitação do membro superior em indivíduos com hemiparesia após Acidente Vascular Encefálico

Objectivo: Este estudo pretende verificar as melhoras nas competências sensórioperceptivas, motoras e de praxis do membro superior afecto e um melhor desempenho das áreas de ocupação: AVD’s, AVDI’s, trabalho e participação social, em indivíduos com hemiparesia após AVE submetidos à reeducação funcional com recurso a actividades funcionais assistidas com EFF; e verificar se estes ganhos mantêm a curto tempo. Métodos: A amostra foi constituída por 4 indivíduos com hemiparesia decorrente de AVE com mais de 12 meses de evolução e idades compreendidas entre os 40 e 70 anos. Foi aplicado um protocolo de intervenção de 5 sessões por semana de 20 minutos de duração num período de 3 semanas, perfazendo um total de 15 sessões. A recolha de dados foi realizada em três fases: avaliação inicial, avaliação no final da intervenção e reavaliação após 6 semanas de finalizar a intervenção. Os instrumentos de recolha de dados utilizados foram: MIF, Escala de Avaliação Fulg-Meyer, Escala Ashworth, DASH, Test Box & Block. Resultados: Os sujeitos diminuíram o grau de espasticidade e melhoraram na funcionalidade do membro superior sendo mais evidente na sinergia flexora do ombro, cotovelo e antebraço e na extensão em massa da mão. Houve melhoras nas actividades da vida diária, actividades de lazer e nos autocuidados (com variações da média de -14, -2,75 e -3 pontos, respectivamente); verificando uma evolução positiva na higiene pessoal e melhoras relevantes no banho. As variações ocorridas 6 semanas após o término do tratamento foram mínimas em todas as áreas funcionais, mantendo os ganhos a nível de espasticidade e funcionalidade do membro superior. Embora houvesse uma diminuição generalizada dos indicadores, tanto parcelares como globais e uma diminuição dos outros sintomas pudemos observar um agravamento das limitações na higiene pessoal, no desempenho do trabalho e na rigidez. Conclusão: A intervenção realizada mediante actividades funcionais assistidas com EFF neste estudo mostrou-se eficiente para o ganho de capacidade funcional, diminuição do tónus muscular do membro superior parético e melhora no desempenho das AVD’s. A amostra reduzida coíbe colocar os achados aqui expostos como sendo fatos constantes desta população. Mais estudos são necessários para a melhor compreensão dos mecanismos e aspectos envolvidos no processo de reabilitação com recuso a EFF em indivíduos com hemiparesia após AVE.

Development of paper-based color test-strip for drug detection in aquatic environment: Application to oxytetracycline

The wide use of antibiotics in aquaculture has led to the emergence of resistant microbial species. It should be avoided/minimized by controlling the amount of drug employed in fish farming. For this purpose, the present work proposes test-strip papers aiming at the detection/semi-quantitative determination of organic drugs by visual comparison of color changes, in a similar analytical procedure to that of pH monitoring by universal pH paper. This is done by establishing suitable chemical changes upon cellulose, attributing the paper the ability to react with the organic drug and to produce a color change. Quantitative data is also enabled by taking a picture and applying a suitable mathematical treatment to the color coordinates given by the HSL system used by windows. As proof of concept, this approach was applied to oxytetracycline (OXY), one of the antibiotics frequently used in aquaculture. A bottom-up modification of paper was established, starting by the reaction of the glucose moieties on the paper with 3-triethoxysilylpropylamine (APTES). The so-formed amine layer allowed binding to a metal ion by coordination chemistry, while the metal ion reacted after with the drug to produce a colored compound. The most suitable metals to carry out such modification were selected by bulk studies, and the several stages of the paper modification were optimized to produce an intense color change against the concentration of the drug. The paper strips were applied to the analysis of spiked environmental water, allowing a quantitative determination for OXY concentrations as low as 30 ng/mL. In general, this work provided a simple, method to screen and discriminate tetracycline drugs, in aquaculture, being a promising tool for local, quick and cheap monitoring of drugs.

TEC4SEA - A Modular Platform for Research, Test and Validation of Technologies Supporting a Sustainable Blue Economy

This paper presents the TEC4SEA research infrastructure created in Portugal to support research, development, and validation of marine technologies. It is a multidisciplinary open platform, capable of supporting research, development, and test of marine robotics, telecommunications, and sensing technologies for monitoring and operating in the ocean environment. Due to the installed research facilities and its privileged geographic location, it allows fast access to deep sea, and can support multidisciplinary research, enabling full validation and evaluation of technological solutions designed for the ocean environment. It is a vertically integrated infrastructure, in the sense that it possesses a set of skills and resources which range from pure conceptual research to field deployment missions, with strong industrial and logistic capacities in the middle tier of prototype production. TEC4SEA is open to the entire scientific and enterprise community, with a free access policy for researchers affiliated with the research units that ensure its maintenance and sustainability. The paper describes the infrastructure in detail, and discusses associated research programs, providing a strategic vision for deep sea research initiatives, within the context of both the Portuguese National Ocean Strategy and European Strategy frameworks.

An Exact Schedulability Test for Global FP Using State Space Pruning

Presented at 23rd International Conference on Real-Time Networks and Systems (RTNS 2015). 4 to 6, Nov, 2015, Main Track. Lille, France.

Dynamic stability metrics for the container loading problem

The Container Loading Problem (CLP) literature has traditionally evaluated the dynamic stability of cargo by applying two metrics to box arrangements: the mean number of boxes supporting the items excluding those placed directly on the floor (M1) and the percentage of boxes with insufficient lateral support (M2). However, these metrics, that aim to be proxies for cargo stability during transportation, fail to translate real-world cargo conditions of dynamic stability. In this paper two new performance indicators are proposed to evaluate the dynamic stability of cargo arrangements: the number of fallen boxes (NFB) and the number of boxes within the Damage Boundary Curve fragility test (NB_DBC). Using 1500 solutions for well-known problem instances found in the literature, these new performance indicators are evaluated using a physics simulation tool (StableCargo), replacing the real-world transportation by a truck with a simulation of the dynamic behaviour of container loading arrangements. Two new dynamic stability metrics that can be integrated within any container loading algorithm are also proposed. The metrics are analytical models of the proposed stability performance indicators, computed by multiple linear regression. Pearson’s r correlation coefficient was used as an evaluation parameter for the performance of the models. The extensive computational results show that the proposed metrics are better proxies for dynamic stability in the CLP than the previous widely used metrics.

Using neural networks and support vector regression to relate marchetti dilatometer test parameters and maximum shear modulus

In the last two decades, small strain shear modulus became one of the most important geotechnical parameters to characterize soil stiffness. Finite element analysis have shown that in-situ stiffness of soils and rocks is much higher than what was previously thought and that stress-strain behaviour of these materials is non-linear in most cases with small strain levels, especially in the ground around retaining walls, foundations and tunnels, typically in the order of 10−2 to 10−4 of strain. Although the best approach to estimate shear modulus seems to be based in measuring seismic wave velocities, deriving the parameter through correlations with in-situ tests is usually considered very useful for design practice.The use of Neural Networks for modeling systems has been widespread, in particular within areas where the great amount of available data and the complexity of the systems keeps the problem very unfriendly to treat following traditional data analysis methodologies. In this work, the use of Neural Networks and Support Vector Regression is proposed to estimate small strain shear modulus for sedimentary soils from the basic or intermediate parameters derived from Marchetti Dilatometer Test. The results are discussed and compared with some of the most common available methodologies for this evaluation.

Using neural networks and support vector regression to relate marchetti dilatometer test parameters and maximum shear modulus

In the last two decades, small strain shear modulus became one of the most important geotechnical parameters to characterize soil stiffness. Finite element analysis have shown that in-situ stiffness of soils and rocks is much higher than what was previously thought and that stress-strain behaviour of these materials is non-linear in most cases with small strain levels, especially in the ground around retaining walls, foundations and tunnels, typically in the order of 10−2 to 10−4 of strain. Although the best approach to estimate shear modulus seems to be based in measuring seismic wave velocities, deriving the parameter through correlations with in-situ tests is usually considered very useful for design practice.The use of Neural Networks for modeling systems has been widespread, in particular within areas where the great amount of available data and the complexity of the systems keeps the problem very unfriendly to treat following traditional data analysis methodologies. In this work, the use of Neural Networks and Support Vector Regression is proposed to estimate small strain shear modulus for sedimentary soils from the basic or intermediate parameters derived from Marchetti Dilatometer Test. The results are discussed and compared with some of the most common available methodologies for this evaluation.